hit counter

Your Files Are Being Processed

70% Complete

Please Wait

Tell Us What Process Equipment You Have For Sale SELL YOUR EQUIPMENT MORE INFO

Used Stainless Steel Kettles & Jacketed Tanks

Below is Aaron's inventory of unused and used stainless steel kettles. If you are looking to sell your used stainless steel kettle submit a request online or contact Erik Eichert at 630-238-7480.

59 Stainless Steel Kettles

Enter to Search

Used- 10 Gallon Stainless Steel Spartanburg Stainless Products Kettle

Stock# 44134005

Used- Spartanburg Stainless Products Kettle, 10 Gallon, 316 Stainless Steel, Vertical. Approximately 28" diameter x 5" straight side, dished top and bottom. Internal rated 100 psi at -20 to 190 degrees F, dimple jacketed, no rating. Includes a swing-in air operated agitator with an approximately 1/2" diameter shaft with a 3 blad more info...

Used- Ritehete Kettle, Model TR30

Stock# 48856002

Used- Ritehete Kettle; Model TR30. Includes: Custom Ivek Digispense 8 system, mixer, multiple circuit heating element uniformly applied to bottom and sidewall. 220 volts/ single phase. 65" high x 32" wide x 66" long. Approximately 600 pounds. Mfg. 1994.

Used- 30 Gallon Stainless Steel B & G Kettle

Stock# 88074

Used- B & G Kettle, 30 Gallon, Stainless Steel. 17" diameter x 28" straight side. (Sidewall of the tank has a bulge in it.) Open top, dish bottom. Jacket rated 50 psi at 300 deg F. 2" center bottom outlet.

Used- LEE Industries 114 Liter (30 Gallon) Jacketed Mixing Vessel, Model 30U, St

Stock# 48125051

Used- LEE Industries 114 Liter (30 Gallon) Jacketed Mixing Vessel, Model 30U, Stainless Steel. Approximately 26? diameter x 20? straight side, jacketed for 100 psi at 338 f, top mounted Silverson emulsifier, model BX60, serial# 2CB2287, Lee serial# C5333A, national board# 7256, built 1997.

Used- Cherry Burrell 50 Gallon Double Motion Jacket Mix Kettle

Stock# 11059213

Used- Cherry Burrell 50 Gallon Double Motion Jacket Mix Kettle. Approximate 50 Gallon. Double motion scrape surface agitation. Jacket rated 150 psi at 400 Degree F. Hinged Lid Processor. Driven by SEW 1 hp at 1760 rpm 230/460V, 3Ph Drive Motors. Pneumatic Bridge lift out assist. Sanitary. Unit is 3' diameter x 18" deep. (Overall more info...

Used- Lee Industries 50 Gallon Triple Motion Kettle, Model 50U7S

Stock# 49564022

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainless Steel. Internal full vacuum rated, jacket rated 100 psi at 338 degree F. Removable dished top head. Top mounted agitators: anchor style agitator with motor, off center 1 hp two tier turbine agitator, and off center 10 hp emulsifier. Mounted on leg more info...

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainle

Stock# 49564023

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainless Steel. Internal full vacuum rated, jacket rated 100 psi at 338 degree F. Removable dished top head. Top mounted agitators: anchor style agitator with motor, off center 1 hp two tier turbine agitator, and off center 10 hp emulsifier. Mounted on leg more info...

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainle

Stock# 49564024

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainless Steel. Internal full vacuum rated, jacket rated 100 psi at 338 degree F. Removable dished top head. Top mounted agitators: anchor style agitator with motor, off center 1 hp two tier turbine agitator, and off center 10 hp emulsifier. Mounted on leg more info...

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainle

Stock# 49564025

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainless Steel. Internal full vacuum rated, jacket rated 100 psi at 338 degree F. Removable dished top head. Top mounted agitators: anchor style agitator with motor, off center 1 hp two tier turbine agitator, and off center 10 hp emulsifier. Mounted on leg more info...

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainle

Stock# 49564026

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, 304 Stainless Steel. Internal full vacuum rated, uniflow coil jacket rated 100 psi at 338 degree F. Removable dished top head. Top mounted agitators: anchor style agitator with motor, off center 1 hp two tier turbine agitator, and off center 10 hp emulsifie more info...

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainl

Stock# 49564030

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor d more info...

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainl

Stock# 49564032

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor d more info...

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainl

Stock# 49564033

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor d more info...

Used- Lee Industries 50 gallon Triple Motion Kettle, Model 50 U7S, Stainless Ste

Stock# 49564034

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor d more info...

Used- Lee Industries 50 gallon Triple Motion Kettle, Model 50 U7S, Stainless Ste

Stock# 49564035

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor d more info...

Used- Lee Industries 50 gallon Triple Motion Kettle, Model 50 U7S, Stainless Ste

Stock# 49564037

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor d more info...

Used- Lee Industries 50 gallon Triple Agitated Kettle, Model 50 U7S, Stainless S

Stock# 49564038

Used- Lee Industries 50 gallon Triple Agitated Kettle, Model 50 U7S, Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dish top. Internal rated full vacuum. Jacket rated 100 psi at 338 degrees F. Top mounted anchor style agitator with motor drive. Off center Ross HSM 510 emulsifier with 10hp drive, off cen more info...

Used- 75 Gallon Stainless Steel O.G. Kelley Kettle

Stock# 40037510

Used- O.G. Kelley Kettle, 75 gallon, stainless steel, vertical. 24'' diameter x 38'' straight side. Flat top with a 1/3 hinged cover, dished bottom. Jacket rated 30 psi at 250 deg F. Top entering off center agitator, approximately 1'' diameter shaft with a 3 blade prop, driven by a Reliance AC tachometer generator, type RE-045, more info...

Groen Kettle, 80 Gallon, Model N-80, Stainless Steel. Approximate 32" diameter x 28" deep, jacketed...

Stock# 49567048

Used- Groen Kettle, 80 Gallon, Model N-80, Stainless Steel. Approximate 32" diameter x 28" deep, jacketed hemispherical bottom rated 125 psi at 353 degrees F. Open top with cover, approximate 2" center bottom outlet. Mounted on 4 carbon steel legs. Serial# & National Board# 112607, built 1982.

Used- GOE / AVINS 100 Gallon Self Contained Scraper Agitated Mixing Kettle Skid

Stock# 50455001

Used- GOE / AVINS 100 Gallon Self Contained Scraper Agitated Mixing Kettle Skid System. Approximate 40" diameter x 22" deep, dished bottom. Dimple jacket rated 15 psi at 275 degrees F. Top entering anchor style agitator. Includes Mokon Heater 18KW, Waukesha Model 018 P.D. Pump (Serial# 1000002601406, built 2010), Sweco model ZS2 more info...

Used- GOE / AVINS 100 Gallon Self Contained Scraper Agitated Mixing Kettle Skid

Stock# 50455002

Used- GOE / AVINS 100 Gallon Self Contained Scraper Agitated Mixing Kettle Skid System. Approximate 40" diameter x 22" deep, dished bottom. Dimple jacket rated 15 psi at 275 degrees F. Top entering anchor style agitator, driven by a 2 hp, 3/60/208-230/460 volt, 1750 rpm motor. Openings top: 16" diameter manway with SS grate, (3) more info...

Lee Industries Double Motion Jacketed Mix Kettle, 100 Gallon, Model 100U9MS. Approximate 30" diamet...

Stock# 11059148

Used- Lee Industries Double Motion Jacketed Mix Kettle, 100 Gallon, Model 100U9MS. Approximate 30" diameter x 32-3/4" straight side. Internal rated 30 PSI at 250 degrees F. Jacket rated 100 PSI at 338 degrees F. Double motion scraper agitation. 316 Stainless steel mirror polished. 4" Center bottom outlet. Last used in sanitary more info...

100 Gallon Stainless Steel Triple Motion Vacuum Sanitary Kettle. Internal rated 15 psi at 287 Deg.F...

Stock# 11059179

Used- 100 Gallon Stainless Steel Triple Motion Vacuum Sanitary Kettle. Internal rated 15 psi at 287 Deg.F. Jacket rated 40 psi at 287 Deg.F. Sweep scraper agitator with center mounted shaft through shaft high speed homogenizer mixer. Vari-speed drive. Bolted dished top. Center bottom outlet. Built by JC Pardo. Missing motor for more info...

Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon

Stock# 50093006

Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon, Stainless Steel, Vertical. Approximate 40" diameter x 30" deep, hemispherical bottom. 3/4 Bottom jacket rated 90 psi at -20 to 320 degrees F. Top entering anchor style agitator with scrap, requires a 1.5HP, 3/60/230/460 volt, 1740 rpm, 56:89 - 1.7 ratio. Top entering more info...

Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon

Stock# 50093007

Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon, Stainless Steel, Vertical. Approximate 40" diameter x 30" deep, hemispherical bottom. 3/4 Bottom jacket rated 90 psi at -20 to 320 degrees F. Top entering anchor style agitator with scrap, driven by a 1.5 hp, 3/60/230/460 volt, 1740 rpm, 56:89 - 1.7 ratio. Top enteri more info...

Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon

Stock# 50093008

Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon, Stainless Steel, Vertical. Approximate 40" diameter x 30" deep, hemispherical bottom. 3/4 Bottom jacket rated 90 psi at -20 to 320 degrees F. Top entering anchor style agitator with scrap, driven by a 1.5HP, 3/60/230/460 volt, 1740 rpm, 56:89 - 1.7 ratio. Top enterin more info...

Used- Hamilton Style CW Tilting Kettle, 150 Gallon,

Stock# 50395001

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 3 hp, 3/60/208-230/460 volt, 1760 rpm gear m more info...

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395002

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers(missing 1 scraper), driven by a 2 hp, 3/60/208-230/460 vo more info...

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395003

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 2 hp, 3/60/208-230/460 volt, 1750 rpm gear m more info...

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395004

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers (missing 1 scraper), driven by a 3 hp, 3/60/208-230/460 v more info...

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395005

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers (missing 2 scraper), driven by a 2 hp, 3/60/208-230/460 v more info...

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395006

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers (missing 1 scraper), driven by a 2 hp, 3/60/208-230/460 v more info...

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395007

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 338 degrees F. Top entering angled anchor style agitator with scrapers (missing 1 scraper), driven by an approximate 2 hp, 3/60/ more info...

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395008

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 338 degrees F. Top entering angled anchor style agitator with scrapers (missing 3 scraper), driven by an approximate 3 hp, 3/60/ more info...

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395009

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 338 degrees F. Top entering angled anchor style agitator with scrapers (missing 3 scraper), driven by an approximate 3 hp, 3/60/ more info...

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395010

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 338 degrees F. Top entering angled anchor style agitator with scrapers, driven by an approximate 3 hp, 3/60/208-230/460 volt, 17 more info...

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395011

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 338 degrees F. Top entering angled anchor style agitator with scrapers (missing 1 scraper), driven by an approximate 3 hp, 3/60/ more info...

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395012

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 338 degrees F. Top entering angled anchor style agitator with scrapers, driven by an approximate 3 hp, 3/60/208-230/460 volt, 17 more info...

Used- Lee Kettle, Model 150DN/INA/2SP.

Stock# 50399001

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 7.5 hp, 3/60/2 more info...

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon

Stock# 50399002

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by an approximate 7 more info...

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon

Stock# 50399003

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by an approximate 7 more info...

Used- Lee Kettle, Model 150DN/INA/2SP.

Stock# 50399004

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 7.5 hp, 3/60/2 more info...

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon

Stock# 50399005

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 7.5 hp, 3/60/2 more info...

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon

Stock# 50399006

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 7.5 hp, 3/60/2 more info...

Used- Lee Industries Triple Motion Vacuum Vessel, Model 175U7S, Approximate 175

Stock# 48125052

Used- Lee Industries Triple Motion Vacuum Vessel, Model 175U7S, Approximate 175 Gallon (660 liter) Working Capacity, Stainless Steel. Removable dish top, dish bottom, rated full vacuum internal, jacketed for 100 psi at 338 f, top entering 10 hp emulsifier, top entering .75 hp agitator, top entering 3 hp anchor agitator designed more info...

Used Greerco/Gifford Wood 1,000 Liter (250 Gallon) 316 Stainless Steel Jacketed

Stock# 11690019

Used Greerco/Gifford Wood 1,000 Liter (250 Gallon) 316 Stainless Steel Jacketed Triple Motion "Agi-Mix" Kettle/Reactor, (J.C. Pardo and Sons vessel). Vessel dimensions approx. 48 in. inside diameter x 54 in. deep, vessel is jacketed for 100 psi at 338 deg. F. Internally rated 20 psi at 250 deg. F., unit has high speed homogeniz more info...

Used- 250 Gallon Lee Kettle

Stock# 14114031

Used- 250 Gallon Lee Kettle, Model 250 D9MS. Stainless Steel, Double Motion Scrape Agitation. Jacket Rated 100 psi at 338 degrees F. 52" Diameter x 36" Deep. (3) 2" Top Inlets. 3" Discharge with Valve, 5 hp, 230/460 Volt, Reducer Ratio 16.66/1. Approximately 104 rpm output. Half Lid. (3) Stainless Steel Legs with Pads. Overall H more info...

Used- Hamilton Jacketed Kettle, 250 Gallon

Stock# 11059218

Used- Hamilton Jacketed Kettle 250 Gallon with Triple Motion Agitation. Has Scrape Surface and Dual Christmas Tree Agitators. Jacket rated 90 psi at 320 Degree F. Model # SA. 5 hp motor into gear box with 38 rpm output on sweep. 3" Outlet with air actuated valve. Unit has temperature probe with gauge. 5' height to kettle lip and more info...

Used- Groen Jacketed Mix Kettle, 300 Gallon

Stock# 11059217

Used- Groen Jacketed Mix Kettle 300 Gallon with Double Motion Inclined Scrape Surface agitation. 30 rpm Scrape Surface Agitator with 68 rpm Secondary Paddle Agitator. Has a 5 hp and 2 hp motor. Jacket rated 100 psi at 338 Degree F. 3" Outlet with air actuated valve. Model INA/2/TA-300. Approximate 8' OAH. Last used in sanitary f more info...

Used- DCI Scraper Agitated Mixing Kettle, 400 Gallon, Stainless Steel, Vertical.

Stock# 49137001

Used- DCI Scraper Agitated Mix Kettle, 400 Gallon, 316 Stainless Steel, Vertical. Approximate 54" diameter x 35" straight Side, dished top and bottom. 304 Stainless steel jacket rated 100/-15 psi at -20 to 350 degrees F. Stainless steel agitator bridge with top entering anchor style agitator, sidewall scraper blades, bottom supp more info...

Used- Groen Jacketed Mix Kettle, 500 Gallon

Stock# 11059216

Used- Groen Jacketed Mix Kettle 500 Gallon with Double Motion Inclined Scrape Surface Agitation with Secondary Paddle Agitator. Jacket rated 100 psi at 338 Degree F. Model INA/2/TA-500. 3" Outlet with air actuated valve. Approximate 9'8" OAH. Missing 1 scraper blade. Last used in sanitary food plant.

Used- 500 Gallon Stainless Steel Alloy Fab Kettle

Stock# 42709003

Used- Alloy Fab Kettle, 500 Gallon, 316L Stainless Steel, Vertical. 54" Diameter x 48" straight side. Dish top and bottom. 3" Diameter 316L stainless steel 1/2 pipe coil jacket rated 150 psi at -20 to 400 degrees F., two separate jacket for sidewall and bottom head. Side wall baffles, Philadelphia agitator, stainless steel shaft more info...

Used Groen 600 Gallon Stainless Steel Kettle

Stock# 50528001

Used- Groen Kettle, 600 Gallon, 316 Stainless Steel, Model PA-600. Approximate 62" inside diameter, Flat top with hinged covers, hemi bottom. Jacket rated 50 PSI at 300 Degrees F. Bridge mounted anchor style agitator with scrapers driven by a 3 phase, 230/460 Volt, 1725 RPM varispeed motor. 3" Bottom outlet. Mounted on (4) more info...

Used- Feldmeier Stainless Steel Double Motion Processor / Kettle, Approximately

Stock# 49866006

Used- Feldmeier Stainless Steel Double Motion Processor / Kettle, Approximately 800 Gallons, 304 Stainless Steel, Vertical. Approximate 60" diameter x 64" straight side, dished top and bottom. Jacket Rated 125 PSI at 300 Degrees F. Openings top: 18" manway with cover, (5) 3". (2) 3" Bottom outlets. Top entering anchor style agit more info...

Used- Mueller Kettle, Approximate 1500 Gallon, Model PCPC-12,000#

Stock# 46971021

Used- Mueller Kettle, Approximate 1500 Gallon, Model PCPC-12,000#, 316L Stainless Steel, Vertical. Approximate 78" Diameter x 78" straight side, dished top, coned bottom. Internal 50 psi @ 350 deg F. Jacket rated 150 psi. Top entering Chemineer agitator, Model 2HTN-2, Serial # 1-99324-3, output rpm 37, approximate 2" diameter s more info...

Used- 10,000 Liter Olsa Twin Motion Vacuum Kettle, Model 400

Stock# 11453253

Used- 10,000 liter (2642 gallon) Olsa Twin Motion Vacuum Kettle, Monel 400 construction. Approximately 90" diameter x 98" straight side, semi elliptical removable top, semi elliptical bottom, jacketed on bottom and full straight side rated 65.3 psi at 203 degree F. Ancho agitator with side wall scrap driven by 37 kw, 440 volt mo more info...

Used- Walker 3000 Gallon Sanitary Jacketed Mix Tank/Kettle/Processor

Stock# 11059214

Used- Walker 3000 Gallon Sanitary Jacketed Mix Tank/Kettle/Processor with Sweep Agitation and Scraper Blades. Model PZ-CB. Jacket rated heat 15 psi at 250 Degree F or Cooling 100 psi at 100 Degree F. Driven by 3/6 hp, 230 volt, 850/1750 rpm motor into SEW gear reducer with 7/14 rpm output. Dome top and Cone Bottom. Last used in more info...

Used- Damrow Cheese Vat, Model Double 00, Approximately 4,500 Gallon

Stock# 48546001

Used- Damrow Cheese Vat, Model Double 00, Approximately 4,500 Gallon Capacity, Stainless Steel. Internal dimensions are 15'2" long x 6'10" high. Complete with agitation with wide sweep agitator paddles, driven by 5 hp, 3/60/230/460 volt, 1170 rpm, motor. Includes (2) 4" diameter discharge openings at 6" and 35" off ground. Previ more info...

Used- Damrow Cheese Vat, Model Double 00, Approximately 4,500 Gallon Capacity, S

Stock# 48546002

Used- Damrow Cheese Vat, Model Double 00, Approximately 4,500 Gallon Capacity, Stainless Steel. Internal dimensions are 15'2" long X 6'10" high. Complete with agitation with wide sweep agitator paddles, driven by 5 HP, 3/60/230/460 volt, 1170 RPM, motor. Includes (2) 4" diameter discharge openings at 6" and 35" off ground. Previ more info...

Used- 10 Gallon Stainless Steel Spartanburg Stainless Products Kettle

Used- 10 Gallon Stainless Steel Spartanburg Stainless Products Kettle

Stock# 44134005

Used- Spartanburg Stainless Products Kettle, 10 Gallon, 316 Stainless Steel, Vertical. Approximately 28" diameter x 5" straight side, dished top and bottom. Internal rated 100 psi at -20 to 190 degrees F, dimple jacketed, no rating. Includes a swing-in air operated agitator with an approximately 1/2" diameter shaft with a 3 blade prop. 12" Top manway with cover, 1" center bottom outlet. Mounted on 3 stainless steel legs.

Gallons: 10 Mfr: Spartanburg Jacket PSI: Agitator: Yes
VIEW ITEM ADD TO CART

Used- Ritehete Kettle, Model TR30

Used- Ritehete Kettle, Model TR30

Stock# 48856002

Used- Ritehete Kettle; Model TR30. Includes: Custom Ivek Digispense 8 system, mixer, multiple circuit heating element uniformly applied to bottom and sidewall. 220 volts/ single phase. 65" high x 32" wide x 66" long. Approximately 600 pounds. Mfg. 1994.

Gallons: 30 Mfr: Jacket PSI: Agitator:
VIEW ITEM ADD TO CART

Used- 30 Gallon Stainless Steel B & G Kettle

Used- 30 Gallon Stainless Steel B & G Kettle

Stock# 88074

Used- B & G Kettle, 30 Gallon, Stainless Steel. 17" diameter x 28" straight side. (Sidewall of the tank has a bulge in it.) Open top, dish bottom. Jacket rated 50 psi at 300 deg F. 2" center bottom outlet.

Gallons: 30 Mfr: B & G Jacket PSI: 50 Agitator: No
VIEW ITEM ADD TO CART

Used- LEE Industries 114 Liter (30 Gallon) Jacketed Mixing Vessel, Model 30U, St

Used- LEE Industries 114 Liter (30 Gallon) Jacketed Mixing Vessel, Model 30U, St

Stock# 48125051

Used- LEE Industries 114 Liter (30 Gallon) Jacketed Mixing Vessel, Model 30U, Stainless Steel. Approximately 26? diameter x 20? straight side, jacketed for 100 psi at 338 f, top mounted Silverson emulsifier, model BX60, serial# 2CB2287, Lee serial# C5333A, national board# 7256, built 1997.

Gallons: 30 Mfr: Lee Ind Jacket PSI: 100 Agitator:
VIEW ITEM ADD TO CART

Used- Cherry Burrell 50 Gallon Double Motion Jacket Mix Kettle

Used- Cherry Burrell 50 Gallon Double Motion Jacket Mix Kettle

Stock# 11059213

Used- Cherry Burrell 50 Gallon Double Motion Jacket Mix Kettle. Approximate 50 Gallon. Double motion scrape surface agitation. Jacket rated 150 psi at 400 Degree F. Hinged Lid Processor. Driven by SEW 1 hp at 1760 rpm 230/460V, 3Ph Drive Motors. Pneumatic Bridge lift out assist. Sanitary. Unit is 3' diameter x 18" deep. (Overall Dimensions 66" Wide x 78" High).

Gallons: 50 Mfr: Cherry Burrell Jacket PSI: Agitator:
VIEW ITEM ADD TO CART

Used- Lee Industries 50 Gallon Triple Motion Kettle, Model 50U7S

Used- Lee Industries 50 Gallon Triple Motion Kettle, Model 50U7S

Stock# 49564022

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainless Steel. Internal full vacuum rated, jacket rated 100 psi at 338 degree F. Removable dished top head. Top mounted agitators: anchor style agitator with motor, off center 1 hp two tier turbine agitator, and off center 10 hp emulsifier. Mounted on legs. National Board# 9797, Serial# 33526-1-1. Built 2004.

Gallons: 50 Mfr: Lee Ind Jacket PSI: 100 Agitator: Triple motion
VIEW ITEM ADD TO CART

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainle

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainle

Stock# 49564023

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainless Steel. Internal full vacuum rated, jacket rated 100 psi at 338 degree F. Removable dished top head. Top mounted agitators: anchor style agitator with motor, off center 1 hp two tier turbine agitator, and off center 10 hp emulsifier. Mounted on legs. National Board# 9798, Serial# 33526-1-2, Built 2004.

Gallons: 50 Mfr: Lee Ind Jacket PSI: 100 Agitator: Triple motion
VIEW ITEM ADD TO CART

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainle

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainle

Stock# 49564024

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainless Steel. Internal full vacuum rated, jacket rated 100 psi at 338 degree F. Removable dished top head. Top mounted agitators: anchor style agitator with motor, off center 1 hp two tier turbine agitator, and off center 10 hp emulsifier. Mounted on legs. National Board# 11178, Serial# 50371-4-2, Built 2007.

Gallons: 50 Mfr: Lee Ind Jacket PSI: 100 Agitator: Triple motion
VIEW ITEM ADD TO CART

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainle

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainle

Stock# 49564025

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainless Steel. Internal full vacuum rated, jacket rated 100 psi at 338 degree F. Removable dished top head. Top mounted agitators: anchor style agitator with motor, off center 1 hp two tier turbine agitator, and off center 10 hp emulsifier. Mounted on legs. National Board# 11177, Serial# 50371-4-1, Built 2007.

Gallons: 50 Mfr: Lee Ind Jacket PSI: 100 Agitator: Triple motion
VIEW ITEM ADD TO CART

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainle

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainle

Stock# 49564026

Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, 304 Stainless Steel. Internal full vacuum rated, uniflow coil jacket rated 100 psi at 338 degree F. Removable dished top head. Top mounted agitators: anchor style agitator with motor, off center 1 hp two tier turbine agitator, and off center 10 hp emulsifier. Mounted on legs. National Board # 9953, Serial# 34960-6-2, Built 2004.

Gallons: 50 Mfr: Lee Ind Jacket PSI: 100 Agitator: Triple motion
VIEW ITEM ADD TO CART

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainl

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainl

Stock# 49564030

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor drive, off center turbine style agitator with 1hp motor drive. Mounted on legs. National Board# 9950, Serial# 34960-5-7, Built 2004.

Gallons: 50 Mfr: Lee Ind Jacket PSI: 100 Agitator: Triple
VIEW ITEM ADD TO CART

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainl

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainl

Stock# 49564032

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor drive, off center turbine style agitator with 1hp motor drive. Mounted on legs. National Board# 9948, Serial# 34960-5-5, built 2004.

Gallons: 50 Mfr: Lee Ind Jacket PSI: 100 Agitator: Triple
VIEW ITEM ADD TO CART

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainl

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainl

Stock# 49564033

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor drive, off center turbine style agitator with 1hp motor drive. Mounted on legs. National Board# 9949, Serial# 34960-5-6, Built 2004.

Gallons: 50 Mfr: Lee Ind Jacket PSI: 100 Agitator: Triple
VIEW ITEM ADD TO CART

Used- Lee Industries 50 gallon Triple Motion Kettle, Model 50 U7S, Stainless Ste

Used- Lee Industries 50 gallon Triple Motion Kettle, Model 50 U7S, Stainless Ste

Stock# 49564034

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor drive, off center turbine style agitator with 1hp motor drive. Mounted on legs. National Board# 9944, Serial# 34960-5-3, Built 2004.

Gallons: 50 Mfr: Lee Ind Jacket PSI: 100 Agitator: Triple
VIEW ITEM ADD TO CART

Used- Lee Industries 50 gallon Triple Motion Kettle, Model 50 U7S, Stainless Ste

Used- Lee Industries 50 gallon Triple Motion Kettle, Model 50 U7S, Stainless Ste

Stock# 49564035

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor drive, off center turbine style agitator with 1hp motor drive. Mounted on legs. National Board# 9945, Serial# 34960-5-4, Built 2004.

Gallons: 50 Mfr: Lee Ind Jacket PSI: 100 Agitator: Triple
VIEW ITEM ADD TO CART

Used- Lee Industries 50 gallon Triple Motion Kettle, Model 50 U7S, Stainless Ste

Used- Lee Industries 50 gallon Triple Motion Kettle, Model 50 U7S, Stainless Ste

Stock# 49564037

Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor drive, off center turbine style agitator with 1hp motor drive. Mounted on legs. National Board# 9936, Serial# 34960-5-1, Built 2004.

Gallons: 50 Mfr: Lee Ind Jacket PSI: 100 Agitator: Triple
VIEW ITEM ADD TO CART

Used- Lee Industries 50 gallon Triple Agitated Kettle, Model 50 U7S, Stainless S

Used- Lee Industries 50 gallon Triple Agitated Kettle, Model 50 U7S, Stainless S

Stock# 49564038

Used- Lee Industries 50 gallon Triple Agitated Kettle, Model 50 U7S, Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dish top. Internal rated full vacuum. Jacket rated 100 psi at 338 degrees F. Top mounted anchor style agitator with motor drive. Off center Ross HSM 510 emulsifier with 10hp drive, off center turbine style agitator with 1hp drive motor. Mounted on legs. National Board# 9937, Serial# 34960-5-2, built 2004.

Gallons: 50 Mfr: Lee Ind Jacket PSI: 100 Agitator: Triple
VIEW ITEM ADD TO CART

Used- 75 Gallon Stainless Steel O.G. Kelley Kettle

Used- 75 Gallon Stainless Steel O.G. Kelley Kettle

Stock# 40037510

Used- O.G. Kelley Kettle, 75 gallon, stainless steel, vertical. 24'' diameter x 38'' straight side. Flat top with a 1/3 hinged cover, dished bottom. Jacket rated 30 psi at 250 deg F. Top entering off center agitator, approximately 1'' diameter shaft with a 3 blade prop, driven by a Reliance AC tachometer generator, type RE-045, 45 volt, speed range 60-5000 rpm. Side lug mounts. Serial N003504, built 1967.

Gallons: 75 Mfr: O.G. Kelley Jacket PSI: 30 Agitator: Reliance
VIEW ITEM ADD TO CART

Groen Kettle, 80 Gallon, Model N-80, Stainless Steel. Approximate 32" diameter x 28" deep, jacketed...

 Groen Kettle, 80 Gallon, Model N-80, Stainless Steel. Approximate 32" diameter x 28" deep, jacketed...

Stock# 49567048

Used- Groen Kettle, 80 Gallon, Model N-80, Stainless Steel. Approximate 32" diameter x 28" deep, jacketed hemispherical bottom rated 125 psi at 353 degrees F. Open top with cover, approximate 2" center bottom outlet. Mounted on 4 carbon steel legs. Serial# & National Board# 112607, built 1982.

Gallons: 80 Mfr: Groen Jacket PSI: 125 Agitator: No
VIEW ITEM ADD TO CART

Used- GOE / AVINS 100 Gallon Self Contained Scraper Agitated Mixing Kettle Skid

Used- GOE / AVINS 100 Gallon Self Contained Scraper Agitated Mixing Kettle Skid

Stock# 50455001

Used- GOE / AVINS 100 Gallon Self Contained Scraper Agitated Mixing Kettle Skid System. Approximate 40" diameter x 22" deep, dished bottom. Dimple jacket rated 15 psi at 275 degrees F. Top entering anchor style agitator. Includes Mokon Heater 18KW, Waukesha Model 018 P.D. Pump (Serial# 1000002601406, built 2010), Sweco model ZS24Y46P3P4SDWC screener (serial# 384658-A01). Unitized on stainless frame with Piping & Controls. New 2008

Gallons: 100 Mfr: Avins Fabricating Jacket PSI: 15 Agitator:
VIEW ITEM ADD TO CART

Used- GOE / AVINS 100 Gallon Self Contained Scraper Agitated Mixing Kettle Skid

Used- GOE / AVINS 100 Gallon Self Contained Scraper Agitated Mixing Kettle Skid

Stock# 50455002

Used- GOE / AVINS 100 Gallon Self Contained Scraper Agitated Mixing Kettle Skid System. Approximate 40" diameter x 22" deep, dished bottom. Dimple jacket rated 15 psi at 275 degrees F. Top entering anchor style agitator, driven by a 2 hp, 3/60/208-230/460 volt, 1750 rpm motor. Openings top: 16" diameter manway with SS grate, (3) 3", (1) 4" tri-clamp. 14" Wide x 16"L loading platform, 2-steps with 27" x 30" work platform. Includes Mokon heating system, model DT4318LN, serial# 7004255, max temp. 200 degrees F., 3/60/460 volt, 18KW. Waukesha jacketed pump, model 18, driven by a 3 hp, 3/60/208-230/460 volt, 1760 rpm motor, serial# 2427031R109. Mounted on a portable stainless steel frame on casters. Kettle Serial# 1356-1, Built 2008.

Gallons: 100 Mfr: Avins Fabricating Jacket PSI: 15 Agitator: Scraper
VIEW ITEM ADD TO CART

Lee Industries Double Motion Jacketed Mix Kettle, 100 Gallon, Model 100U9MS. Approximate 30" diamet...

 Lee Industries Double Motion Jacketed Mix Kettle, 100 Gallon, Model 100U9MS. Approximate 30" diamet...

Stock# 11059148

Used- Lee Industries Double Motion Jacketed Mix Kettle, 100 Gallon, Model 100U9MS. Approximate 30" diameter x 32-3/4" straight side. Internal rated 30 PSI at 250 degrees F. Jacket rated 100 PSI at 338 degrees F. Double motion scraper agitation. 316 Stainless steel mirror polished. 4" Center bottom outlet. Last used in sanitary application.

Gallons: 100 Mfr: Lee Ind Jacket PSI: Agitator:
VIEW ITEM ADD TO CART

100 Gallon Stainless Steel Triple Motion Vacuum Sanitary Kettle. Internal rated 15 psi at 287 Deg.F...

 100 Gallon Stainless Steel Triple Motion Vacuum Sanitary Kettle. Internal rated 15 psi at 287 Deg.F...

Stock# 11059179

Used- 100 Gallon Stainless Steel Triple Motion Vacuum Sanitary Kettle. Internal rated 15 psi at 287 Deg.F. Jacket rated 40 psi at 287 Deg.F. Sweep scraper agitator with center mounted shaft through shaft high speed homogenizer mixer. Vari-speed drive. Bolted dished top. Center bottom outlet. Built by JC Pardo. Missing motor for high shear mixer.

Gallons: 100 Mfr: Jacket PSI: Agitator:
VIEW ITEM ADD TO CART

Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon

Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon

Stock# 50093006

Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon, Stainless Steel, Vertical. Approximate 40" diameter x 30" deep, hemispherical bottom. 3/4 Bottom jacket rated 90 psi at -20 to 320 degrees F. Top entering anchor style agitator with scrap, requires a 1.5HP, 3/60/230/460 volt, 1740 rpm, 56:89 - 1.7 ratio. Top entering offset high shear agitator, requires a 3/2HP, 3/50/60/230/460/190/380 volt, 3460/2900 rpm motor. Adjustable baffle. 2" Center bottom outlet with air actuated valve. National Board# 050, Serial# F 3316-2, Built 2000.

Gallons: 100 Mfr: Hamilton Jacket PSI: 90 Agitator:
VIEW ITEM ADD TO CART

Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon

Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon

Stock# 50093007

Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon, Stainless Steel, Vertical. Approximate 40" diameter x 30" deep, hemispherical bottom. 3/4 Bottom jacket rated 90 psi at -20 to 320 degrees F. Top entering anchor style agitator with scrap, driven by a 1.5 hp, 3/60/230/460 volt, 1740 rpm, 56:89 - 1.7 ratio. Top entering offset high shear agitator, driven by a 3/2 hp, 3/50/60/230/460/190/380 volt, 3460/2900 rpm motor. Adjustable baffle. 2" Center bottom outlet with air actuated valve. National Board # 056, Serial # F 3316-8. Built 2000.

Gallons: 100 Mfr: Hamilton Jacket PSI: Agitator:
VIEW ITEM ADD TO CART

Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon

Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon

Stock# 50093008

Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon, Stainless Steel, Vertical. Approximate 40" diameter x 30" deep, hemispherical bottom. 3/4 Bottom jacket rated 90 psi at -20 to 320 degrees F. Top entering anchor style agitator with scrap, driven by a 1.5HP, 3/60/230/460 volt, 1740 rpm, 56:89 - 1.7 ratio. Top entering offset high shear agitator, driven by a 3/2HP, 3/50/60/230/460/190/380 volt, 3460/2900 rpm motor. 2" Center bottom outlet with air actuated valve. National Board# 052, Serial# F 3316-4, Built 2000.

Gallons: 100 Mfr: Hamilton Jacket PSI: Agitator:
VIEW ITEM ADD TO CART

Used- Hamilton Style CW Tilting Kettle, 150 Gallon,

Used- Hamilton Style CW Tilting Kettle, 150 Gallon,

Stock# 50395001

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 3 hp, 3/60/208-230/460 volt, 1760 rpm gear motor, 44.32 to 1 ratio. Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 170, Serial # F-4662-1, Built 2002.

Gallons: 150 Mfr: Hamilton Jacket PSI: 100 Agitator: Anchor/ Scrape
VIEW ITEM ADD TO CART

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395002

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers(missing 1 scraper), driven by a 2 hp, 3/60/208-230/460 volt, 1750 rpm gear motor, 44.32 to 1 ratio. Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 171, Serial # F-4662-2, Built 2002.

Gallons: 150 Mfr: Hamilton Jacket PSI: 100 Agitator: Anchor/ Scrape
VIEW ITEM ADD TO CART

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395003

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 2 hp, 3/60/208-230/460 volt, 1750 rpm gear motor, approximate 44.32 to 1 ratio (no gearbox tag). Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 172, Serial # F-4662-3, Built 2002.

Gallons: 150 Mfr: Hamilton Jacket PSI: 100 Agitator: Anchor/ Scrape
VIEW ITEM ADD TO CART

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395004

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers (missing 1 scraper), driven by a 3 hp, 3/60/208-230/460 volt, 1750 rpm gear motor, approximate 44.32 to 1 ratio (no gearbox tag). Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 278, Serial # F-5817-2, Built 2004.

Gallons: 150 Mfr: Hamilton Jacket PSI: 100 Agitator: Anchor/ Scrape
VIEW ITEM ADD TO CART

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395005

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers (missing 2 scraper), driven by a 2 hp, 3/60/208-230/460 volt, 1750 rpm gear motor, approximate 44.32 to 1 ratio. Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 279, Serial # F-5817-3, Built 2004.

Gallons: 150 Mfr: Hamilton Jacket PSI: 100 Agitator: Anchor/ Scrape
VIEW ITEM ADD TO CART

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395006

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers (missing 1 scraper), driven by a 2 hp, 3/60/208-230/460 volt, 1720 rpm gear motor, approximate 44.32 to 1 ratio. Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 277, Serial # F-5817-1, Built 2004.

Gallons: 150 Mfr: Hamilton Jacket PSI: 100 Agitator: Anchor/ Scrape
VIEW ITEM ADD TO CART

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395007

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 338 degrees F. Top entering angled anchor style agitator with scrapers (missing 1 scraper), driven by an approximate 2 hp, 3/60/208-230/460 volt, 1750 rpm gear motor(no motor tag), approximate 44.32 to 1 ratio. Motorized agitator tilt, driven by a 1 hp. Motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 336, Serial # F-6667-2, Built 2005.

Gallons: 150 Mfr: Hamilton Jacket PSI: 100 Agitator: Anchor/ Scrape
VIEW ITEM ADD TO CART

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395008

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 338 degrees F. Top entering angled anchor style agitator with scrapers (missing 3 scraper), driven by an approximate 3 hp, 3/60/208-230/460 volt, 1745 rpm gear motor(motor not installed), approximate 44.32 to 1 ratio. Motorized agitator tilt, motorized bowl tilt (requires motor), pouring lip. 3" Center bottom outlet with incomplete valve assembly. Mounted on a stainless steel frame with (3) leg. National Board # 335, Serial # F-6667-1, Built 2005.

Gallons: 150 Mfr: Hamilton Jacket PSI: 100 Agitator: Anchor/ Scrape
VIEW ITEM ADD TO CART

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395009

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 338 degrees F. Top entering angled anchor style agitator with scrapers (missing 3 scraper), driven by an approximate 3 hp, 3/60/208-230/460 volt, 1745 rpm gear motor, approximate 44.32 to 1 ratio. Motorized agitator tilt, driven by a 1 hp motor. Motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 337, Serial # F-6667-3, Built 2005.

Gallons: 150 Mfr: Hamilton Jacket PSI: 100 Agitator: Anchor/ Scrape
VIEW ITEM ADD TO CART

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395010

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 338 degrees F. Top entering angled anchor style agitator with scrapers, driven by an approximate 3 hp, 3/60/208-230/460 volt, 1760 rpm gear motor, approximate 44.32 to 1 ratio. Motorized agitator tilt, driven by a 1 hp motor. Motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 338, Serial # F-6667-4, Built 2005.

Gallons: 150 Mfr: Hamilton Jacket PSI: 100 Agitator: Anchor/ Scrape
VIEW ITEM ADD TO CART

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395011

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 338 degrees F. Top entering angled anchor style agitator with scrapers (missing 1 scraper), driven by an approximate 3 hp, 3/60/208-230/460 volt, 1745 rpm gear motor, approximate 44.32 to 1 ratio. Motorized agitator tilt, driven by a 1 hp motor. Motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 339, Serial # F-6667-5, Built 2005.

Gallons: 150 Mfr: Hamilton Jacket PSI: 100 Agitator: Anchor/ Scrape
VIEW ITEM ADD TO CART

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

Stock# 50395012

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 338 degrees F. Top entering angled anchor style agitator with scrapers, driven by an approximate 3 hp, 3/60/208-230/460 volt, 1745 rpm gear motor, approximate 44.32 to 1 ratio. Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 340, Serial # F-6667-6, Built 2005.

Gallons: 150 Mfr: Hamilton Jacket PSI: 100 Agitator: Anchor/ Scrape
VIEW ITEM ADD TO CART

Used- Lee Kettle, Model 150DN/INA/2SP.

Used- Lee Kettle, Model 150DN/INA/2SP.

Stock# 50399001

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 7.5 hp, 3/60/208-230/460 volt, 1725 rpm gear motor, 56.55 to 1 ratio. Air operated agitator tilt. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 11029, Serial # 491191-5, Built 2007.

Gallons: 150 Mfr: Lee Ind Jacket PSI: 90 Agitator: Anchor/ Scrape
VIEW ITEM ADD TO CART

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon

Stock# 50399002

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by an approximate 7.5 hp, 3/60/208-230/460 volt, 1725 rpm gear motor, 56.55 to 1 ratio (No motor tag). Air operated agitator tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 11028, Serial # 491191-4, Built 2007.

Gallons: 150 Mfr: Lee Ind Jacket PSI: 90 Agitator: Anchor/ Scrape
VIEW ITEM ADD TO CART

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon

Stock# 50399003

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by an approximate 7.5 hp, 3/60/208-230/460 volt, 1725 rpm gear motor, 56.55 to 1 ratio (No motor tag). Air operated agitator tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 11031, Serial # 49119-1-2, Built 2007.

Gallons: 150 Mfr: Lee Ind Jacket PSI: 90 Agitator: Anchor/ Scrape
VIEW ITEM ADD TO CART

Used- Lee Kettle, Model 150DN/INA/2SP.

Used- Lee Kettle, Model 150DN/INA/2SP.

Stock# 50399004

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 7.5 hp, 3/60/208-230/460 volt, 1725 rpm gear motor, 56.55 to 1 ratio. Air operated agitator tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 11060, Serial # 49119-1-3, Built 2007.

Gallons: 150 Mfr: Lee Ind Jacket PSI: 90 Agitator: Anchor/ Scrape
VIEW ITEM ADD TO CART

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon

Stock# 50399005

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 7.5 hp, 3/60/208-230/460 volt, 1725 rpm gear motor, 56.55 to 1 ratio. Air operated agitator tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 11061, Serial # 49119-1-5, Built 2007.

Gallons: 150 Mfr: Lee Ind Jacket PSI: 90 Agitator: Anchor/ Scrape
VIEW ITEM ADD TO CART

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon

Stock# 50399006

Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 7.5 hp, 3/60/208-230/460 volt, 1725 rpm gear motor, 56.55 to 1 ratio. Air operated agitator tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 11030, Serial # 49119-1-1, Built 2007.

Gallons: 150 Mfr: Lee Ind Jacket PSI: 90 Agitator: Anchor/ Scrape
VIEW ITEM ADD TO CART

Used- Lee Industries Triple Motion Vacuum Vessel, Model 175U7S, Approximate 175

Used- Lee Industries Triple Motion Vacuum Vessel, Model 175U7S, Approximate 175

Stock# 48125052

Used- Lee Industries Triple Motion Vacuum Vessel, Model 175U7S, Approximate 175 Gallon (660 liter) Working Capacity, Stainless Steel. Removable dish top, dish bottom, rated full vacuum internal, jacketed for 100 psi at 338 f, top entering 10 hp emulsifier, top entering .75 hp agitator, top entering 3 hp anchor agitator designed for sidewall scrappers(less scrappers), on legs.

Gallons: 211.33 Mfr: Lee Ind Jacket PSI: Agitator:
VIEW ITEM ADD TO CART

Used Greerco/Gifford Wood 1,000 Liter (250 Gallon) 316 Stainless Steel Jacketed

Used Greerco/Gifford Wood 1,000 Liter (250 Gallon) 316 Stainless Steel Jacketed

Stock# 11690019

Used Greerco/Gifford Wood 1,000 Liter (250 Gallon) 316 Stainless Steel Jacketed Triple Motion "Agi-Mix" Kettle/Reactor, (J.C. Pardo and Sons vessel). Vessel dimensions approx. 48 in. inside diameter x 54 in. deep, vessel is jacketed for 100 psi at 338 deg. F. Internally rated 20 psi at 250 deg. F., unit has high speed homogenizing head top driven by 25HP 3/60/460V motor. Double motion scrape surface agitation separately driven by 5HP 3/60/220-440V motor. Equipped with "tilt-out" agitation through self-contained hydraulic motor and cylinder. On stainless legs, vessel has center-bottom outlet with valve as well as Allen Bradley panel and stainless steel starter panel. Dished top head has quick opening bolts and 12 in. Diameter manway with hinged lid and sight glass.

Gallons: 250 Mfr: Greerco Jacket PSI: Agitator:
VIEW ITEM ADD TO CART

Used- 250 Gallon Lee Kettle

Used- 250 Gallon Lee Kettle

Stock# 14114031

Used- 250 Gallon Lee Kettle, Model 250 D9MS. Stainless Steel, Double Motion Scrape Agitation. Jacket Rated 100 psi at 338 degrees F. 52" Diameter x 36" Deep. (3) 2" Top Inlets. 3" Discharge with Valve, 5 hp, 230/460 Volt, Reducer Ratio 16.66/1. Approximately 104 rpm output. Half Lid. (3) Stainless Steel Legs with Pads. Overall Height with Mixer 79". Mfg. 2011. Last used in a Food Application.

Gallons: 250 Mfr: Jacket PSI: Agitator:
VIEW ITEM ADD TO CART

Used- Hamilton Jacketed Kettle, 250 Gallon

Used- Hamilton Jacketed Kettle, 250 Gallon

Stock# 11059218

Used- Hamilton Jacketed Kettle 250 Gallon with Triple Motion Agitation. Has Scrape Surface and Dual Christmas Tree Agitators. Jacket rated 90 psi at 320 Degree F. Model # SA. 5 hp motor into gear box with 38 rpm output on sweep. 3" Outlet with air actuated valve. Unit has temperature probe with gauge. 5' height to kettle lip and 8'6" OAH. Last used in sanitary food plant.

Gallons: 250 Mfr: Hamilton Jacket PSI: Agitator:
VIEW ITEM ADD TO CART

Used- Groen Jacketed Mix Kettle, 300 Gallon

Used- Groen Jacketed Mix Kettle, 300 Gallon

Stock# 11059217

Used- Groen Jacketed Mix Kettle 300 Gallon with Double Motion Inclined Scrape Surface agitation. 30 rpm Scrape Surface Agitator with 68 rpm Secondary Paddle Agitator. Has a 5 hp and 2 hp motor. Jacket rated 100 psi at 338 Degree F. 3" Outlet with air actuated valve. Model INA/2/TA-300. Approximate 8' OAH. Last used in sanitary food plant.

Gallons: 300 Mfr: Groen Jacket PSI: Agitator:
VIEW ITEM ADD TO CART

Used- DCI Scraper Agitated Mixing Kettle, 400 Gallon, Stainless Steel, Vertical.

Used- DCI Scraper Agitated Mixing Kettle, 400 Gallon, Stainless Steel, Vertical.

Stock# 49137001

Used- DCI Scraper Agitated Mix Kettle, 400 Gallon, 316 Stainless Steel, Vertical. Approximate 54" diameter x 35" straight Side, dished top and bottom. 304 Stainless steel jacket rated 100/-15 psi at -20 to 350 degrees F. Stainless steel agitator bridge with top entering anchor style agitator, sidewall scraper blades, bottom supported. Driven by a 2hp, 3/60/460 volt, 1750 rpm gear motor, 95.32 to 1 ratio. Openings top: approximate 18-1/2" manway with cover, (2) 1-1/2", (1) 2", (1) 3", (1) 3" Center Bottom Outlet. (2) Baffles. (2) Spray balls. Side lug mounted. Built 1992.

Gallons: 400 Mfr: DCI Jacket PSI: 100 Agitator:
VIEW ITEM ADD TO CART

Used- Groen Jacketed Mix Kettle, 500 Gallon

Used- Groen Jacketed Mix Kettle, 500 Gallon

Stock# 11059216

Used- Groen Jacketed Mix Kettle 500 Gallon with Double Motion Inclined Scrape Surface Agitation with Secondary Paddle Agitator. Jacket rated 100 psi at 338 Degree F. Model INA/2/TA-500. 3" Outlet with air actuated valve. Approximate 9'8" OAH. Missing 1 scraper blade. Last used in sanitary food plant.

Gallons: 500 Mfr: Groen Jacket PSI: Agitator:
VIEW ITEM ADD TO CART

Used- 500 Gallon Stainless Steel Alloy Fab Kettle

Used- 500 Gallon Stainless Steel Alloy Fab Kettle

Stock# 42709003

Used- Alloy Fab Kettle, 500 Gallon, 316L Stainless Steel, Vertical. 54" Diameter x 48" straight side. Dish top and bottom. 3" Diameter 316L stainless steel 1/2 pipe coil jacket rated 150 psi at -20 to 400 degrees F., two separate jacket for sidewall and bottom head. Side wall baffles, Philadelphia agitator, stainless steel shaft with a 4 blade turbine, driven by a 15hp motor. Various top openings, center bottom outlet. Mounted on (4) pipe legs.

Gallons: 500 Mfr: Alloy Fab Jacket PSI: 150 Agitator: Yes
VIEW ITEM ADD TO CART

Used Groen 600 Gallon Stainless Steel Kettle

Used Groen 600 Gallon Stainless Steel Kettle

Stock# 50528001

Used- Groen Kettle, 600 Gallon, 316 Stainless Steel, Model PA-600. Approximate 62" inside diameter, Flat top with hinged covers, hemi bottom. Jacket rated 50 PSI at 300 Degrees F. Bridge mounted anchor style agitator with scrapers driven by a 3 phase, 230/460 Volt, 1725 RPM varispeed motor. 3" Bottom outlet. Mounted on (4) approximate 3" diameter legs.

Gallons: 600 Mfr: Groen Jacket PSI: Agitator:
VIEW ITEM ADD TO CART

Used- Feldmeier Stainless Steel Double Motion Processor / Kettle, Approximately

Used- Feldmeier Stainless Steel Double Motion Processor / Kettle, Approximately

Stock# 49866006

Used- Feldmeier Stainless Steel Double Motion Processor / Kettle, Approximately 800 Gallons, 304 Stainless Steel, Vertical. Approximate 60" diameter x 64" straight side, dished top and bottom. Jacket Rated 125 PSI at 300 Degrees F. Openings top: 18" manway with cover, (5) 3". (2) 3" Bottom outlets. Top entering anchor style agitator, missing scraper and drive. Inner bar type agitator, missing drive, bottom supported. Mounted on (4) legs. Serial# E-423-04, National Board# 6044, Built 2004. Missing Drive.

Gallons: 800 Mfr: Feldmeier Jacket PSI: 125 Agitator:
VIEW ITEM ADD TO CART

Used- Mueller Kettle, Approximate 1500 Gallon, Model PCPC-12,000#

Used- Mueller Kettle, Approximate 1500 Gallon, Model PCPC-12,000#

Stock# 46971021

Used- Mueller Kettle, Approximate 1500 Gallon, Model PCPC-12,000#, 316L Stainless Steel, Vertical. Approximate 78" Diameter x 78" straight side, dished top, coned bottom. Internal 50 psi @ 350 deg F. Jacket rated 150 psi. Top entering Chemineer agitator, Model 2HTN-2, Serial # 1-99324-3, output rpm 37, approximate 2" diameter shaft with (2) 4 blade turbines, driven by a 3 hp, 3/60/208-230/460 volt, 1720 rpm motor. Side wall baffles. Top man way, center bottom outlet. Mounted on 4 stainless steel legs. Serial # 82398. ASME NB Rated.

Gallons: 1500 Mfr: Mueller Corp Jacket PSI: 150 Agitator: Yes
VIEW ITEM ADD TO CART

Used- 10,000 Liter Olsa Twin Motion Vacuum Kettle, Model 400

Used- 10,000 Liter Olsa Twin Motion Vacuum Kettle, Model 400

Stock# 11453253

Used- 10,000 liter (2642 gallon) Olsa Twin Motion Vacuum Kettle, Monel 400 construction. Approximately 90" diameter x 98" straight side, semi elliptical removable top, semi elliptical bottom, jacketed on bottom and full straight side rated 65.3 psi at 203 degree F. Ancho agitator with side wall scrap driven by 37 kw, 440 volt motor, 5-19 rpm shaft speed. Inner opposing paddle agitator driven by 18.5 kw, 440 volt motor, 8-32 rpm shaft speed, 15" top manway, 4", (4) 3", (4) 2", (6) 1.5" top nozzles, 4" bottom outlet, on 6 legs. Ross Engineering control panel with Square D Altivar 58 VFD motor controllers, 460 volt, panel Serial # 201-006. Jacket certified by ICOSS, Serial# 483. National Board # 125. New 2001.

Gallons: 2642 Mfr: Olsa Jacket PSI: 65.3 Agitator: Twin Motion
VIEW ITEM ADD TO CART

Used- Walker 3000 Gallon Sanitary Jacketed Mix Tank/Kettle/Processor

Used- Walker 3000 Gallon Sanitary Jacketed Mix Tank/Kettle/Processor

Stock# 11059214

Used- Walker 3000 Gallon Sanitary Jacketed Mix Tank/Kettle/Processor with Sweep Agitation and Scraper Blades. Model PZ-CB. Jacket rated heat 15 psi at 250 Degree F or Cooling 100 psi at 100 Degree F. Driven by 3/6 hp, 230 volt, 850/1750 rpm motor into SEW gear reducer with 7/14 rpm output. Dome top and Cone Bottom. Last used in Food Plant. 8' diameter x 8'6" straight side. Approximate 16'6" OAH.

Gallons: 3000 Mfr: Walker Jacket PSI: Agitator:
VIEW ITEM ADD TO CART

Used- Damrow Cheese Vat, Model Double 00, Approximately 4,500 Gallon

Used- Damrow Cheese Vat, Model Double 00, Approximately 4,500 Gallon

Stock# 48546001

Used- Damrow Cheese Vat, Model Double 00, Approximately 4,500 Gallon Capacity, Stainless Steel. Internal dimensions are 15'2" long x 6'10" high. Complete with agitation with wide sweep agitator paddles, driven by 5 hp, 3/60/230/460 volt, 1170 rpm, motor. Includes (2) 4" diameter discharge openings at 6" and 35" off ground. Previously used at major dairy processor.

Gallons: 4500 Mfr: Damrow Jacket PSI: Agitator: Sweep
VIEW ITEM ADD TO CART

Used- Damrow Cheese Vat, Model Double 00, Approximately 4,500 Gallon Capacity, S

Used- Damrow Cheese Vat, Model Double 00, Approximately 4,500 Gallon Capacity, S

Stock# 48546002

Used- Damrow Cheese Vat, Model Double 00, Approximately 4,500 Gallon Capacity, Stainless Steel. Internal dimensions are 15'2" long X 6'10" high. Complete with agitation with wide sweep agitator paddles, driven by 5 HP, 3/60/230/460 volt, 1170 RPM, motor. Includes (2) 4" diameter discharge openings at 6" and 35" off ground. Previously used at major dairy processor.

Gallons: 4500 Mfr: Damrow Jacket PSI: Agitator:
VIEW ITEM ADD TO CART
  • Used- 10 Gallon Stainless Steel Spartanburg Stainless Products Kettle

    Used- Spartanburg Stainless Products Kettle, 10 Gallon, 316 Stainless Steel, Vertical. Approximately 28" diameter x 5" straight side, dished top and bottom. Internal rated 100 psi at -20 to 190 degrees F, dimple jacketed, no rating. Includes a swing-in air operated agitator with an approximately 1/2" diameter shaft with a 3 blade prop. 12" Top manway with cover, 1" center bottom outlet. Mounted on 3 stainless steel legs.

    VIEW ITEM
  • Used- Ritehete Kettle, Model TR30

    Used- Ritehete Kettle; Model TR30. Includes: Custom Ivek Digispense 8 system, mixer, multiple circuit heating element uniformly applied to bottom and sidewall. 220 volts/ single phase. 65" high x 32" wide x 66" long. Approximately 600 pounds. Mfg. 1994.

    VIEW ITEM
  • Used- 30 Gallon Stainless Steel B & G Kettle

    Used- B & G Kettle, 30 Gallon, Stainless Steel. 17" diameter x 28" straight side. (Sidewall of the tank has a bulge in it.) Open top, dish bottom. Jacket rated 50 psi at 300 deg F. 2" center bottom outlet.

    VIEW ITEM
  • Used- LEE Industries 114 Liter (30 Gallon) Jacketed Mixing Vessel, Model 30U, St

    Used- LEE Industries 114 Liter (30 Gallon) Jacketed Mixing Vessel, Model 30U, Stainless Steel. Approximately 26? diameter x 20? straight side, jacketed for 100 psi at 338 f, top mounted Silverson emulsifier, model BX60, serial# 2CB2287, Lee serial# C5333A, national board# 7256, built 1997.

    VIEW ITEM
  • Used- Cherry Burrell 50 Gallon Double Motion Jacket Mix Kettle

    Used- Cherry Burrell 50 Gallon Double Motion Jacket Mix Kettle. Approximate 50 Gallon. Double motion scrape surface agitation. Jacket rated 150 psi at 400 Degree F. Hinged Lid Processor. Driven by SEW 1 hp at 1760 rpm 230/460V, 3Ph Drive Motors. Pneumatic Bridge lift out assist. Sanitary. Unit is 3' diameter x 18" deep. (Overall Dimensions 66" Wide x 78" High).

    VIEW ITEM
  • Used- Lee Industries 50 Gallon Triple Motion Kettle, Model 50U7S

    Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainless Steel. Internal full vacuum rated, jacket rated 100 psi at 338 degree F. Removable dished top head. Top mounted agitators: anchor style agitator with motor, off center 1 hp two tier turbine agitator, and off center 10 hp emulsifier. Mounted on legs. National Board# 9797, Serial# 33526-1-1. Built 2004.

    VIEW ITEM
  • Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainle

    Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainless Steel. Internal full vacuum rated, jacket rated 100 psi at 338 degree F. Removable dished top head. Top mounted agitators: anchor style agitator with motor, off center 1 hp two tier turbine agitator, and off center 10 hp emulsifier. Mounted on legs. National Board# 9798, Serial# 33526-1-2, Built 2004.

    VIEW ITEM
  • Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainle

    Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainless Steel. Internal full vacuum rated, jacket rated 100 psi at 338 degree F. Removable dished top head. Top mounted agitators: anchor style agitator with motor, off center 1 hp two tier turbine agitator, and off center 10 hp emulsifier. Mounted on legs. National Board# 11178, Serial# 50371-4-2, Built 2007.

    VIEW ITEM
  • Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainle

    Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainless Steel. Internal full vacuum rated, jacket rated 100 psi at 338 degree F. Removable dished top head. Top mounted agitators: anchor style agitator with motor, off center 1 hp two tier turbine agitator, and off center 10 hp emulsifier. Mounted on legs. National Board# 11177, Serial# 50371-4-1, Built 2007.

    VIEW ITEM
  • Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, Stainle

    Used- Lee Industries 50 Gallon Triple Motion Vacuum Kettle, Model 50U7S, 304 Stainless Steel. Internal full vacuum rated, uniflow coil jacket rated 100 psi at 338 degree F. Removable dished top head. Top mounted agitators: anchor style agitator with motor, off center 1 hp two tier turbine agitator, and off center 10 hp emulsifier. Mounted on legs. National Board # 9953, Serial# 34960-6-2, Built 2004.

    VIEW ITEM
  • Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainl

    Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor drive, off center turbine style agitator with 1hp motor drive. Mounted on legs. National Board# 9950, Serial# 34960-5-7, Built 2004.

    VIEW ITEM
  • Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainl

    Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor drive, off center turbine style agitator with 1hp motor drive. Mounted on legs. National Board# 9948, Serial# 34960-5-5, built 2004.

    VIEW ITEM
  • Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainl

    Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor drive, off center turbine style agitator with 1hp motor drive. Mounted on legs. National Board# 9949, Serial# 34960-5-6, Built 2004.

    VIEW ITEM
  • Used- Lee Industries 50 gallon Triple Motion Kettle, Model 50 U7S, Stainless Ste

    Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor drive, off center turbine style agitator with 1hp motor drive. Mounted on legs. National Board# 9944, Serial# 34960-5-3, Built 2004.

    VIEW ITEM
  • Used- Lee Industries 50 gallon Triple Motion Kettle, Model 50 U7S, Stainless Ste

    Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor drive, off center turbine style agitator with 1hp motor drive. Mounted on legs. National Board# 9945, Serial# 34960-5-4, Built 2004.

    VIEW ITEM
  • Used- Lee Industries 50 gallon Triple Motion Kettle, Model 50 U7S, Stainless Ste

    Used- Lee Industries 50 Gallon Triple Agitated Kettle, Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor drive, off center turbine style agitator with 1hp motor drive. Mounted on legs. National Board# 9936, Serial# 34960-5-1, Built 2004.

    VIEW ITEM
  • Used- Lee Industries 50 gallon Triple Agitated Kettle, Model 50 U7S, Stainless S

    Used- Lee Industries 50 gallon Triple Agitated Kettle, Model 50 U7S, Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dish top. Internal rated full vacuum. Jacket rated 100 psi at 338 degrees F. Top mounted anchor style agitator with motor drive. Off center Ross HSM 510 emulsifier with 10hp drive, off center turbine style agitator with 1hp drive motor. Mounted on legs. National Board# 9937, Serial# 34960-5-2, built 2004.

    VIEW ITEM
  • Used- 75 Gallon Stainless Steel O.G. Kelley Kettle

    Used- O.G. Kelley Kettle, 75 gallon, stainless steel, vertical. 24'' diameter x 38'' straight side. Flat top with a 1/3 hinged cover, dished bottom. Jacket rated 30 psi at 250 deg F. Top entering off center agitator, approximately 1'' diameter shaft with a 3 blade prop, driven by a Reliance AC tachometer generator, type RE-045, 45 volt, speed range 60-5000 rpm. Side lug mounts. Serial N003504, built 1967.

    VIEW ITEM
  • Groen Kettle, 80 Gallon, Model N-80, Stainless Steel. Approximate 32" diameter x 28" deep, jacketed...

    Used- Groen Kettle, 80 Gallon, Model N-80, Stainless Steel. Approximate 32" diameter x 28" deep, jacketed hemispherical bottom rated 125 psi at 353 degrees F. Open top with cover, approximate 2" center bottom outlet. Mounted on 4 carbon steel legs. Serial# & National Board# 112607, built 1982.

    VIEW ITEM
  • Used- GOE / AVINS 100 Gallon Self Contained Scraper Agitated Mixing Kettle Skid

    Used- GOE / AVINS 100 Gallon Self Contained Scraper Agitated Mixing Kettle Skid System. Approximate 40" diameter x 22" deep, dished bottom. Dimple jacket rated 15 psi at 275 degrees F. Top entering anchor style agitator. Includes Mokon Heater 18KW, Waukesha Model 018 P.D. Pump (Serial# 1000002601406, built 2010), Sweco model ZS24Y46P3P4SDWC screener (serial# 384658-A01). Unitized on stainless frame with Piping & Controls. New 2008

    VIEW ITEM
  • Used- GOE / AVINS 100 Gallon Self Contained Scraper Agitated Mixing Kettle Skid

    Used- GOE / AVINS 100 Gallon Self Contained Scraper Agitated Mixing Kettle Skid System. Approximate 40" diameter x 22" deep, dished bottom. Dimple jacket rated 15 psi at 275 degrees F. Top entering anchor style agitator, driven by a 2 hp, 3/60/208-230/460 volt, 1750 rpm motor. Openings top: 16" diameter manway with SS grate, (3) 3", (1) 4" tri-clamp. 14" Wide x 16"L loading platform, 2-steps with 27" x 30" work platform. Includes Mokon heating system, model DT4318LN, serial# 7004255, max temp. 200 degrees F., 3/60/460 volt, 18KW. Waukesha jacketed pump, model 18, driven by a 3 hp, 3/60/208-230/460 volt, 1760 rpm motor, serial# 2427031R109. Mounted on a portable stainless steel frame on casters. Kettle Serial# 1356-1, Built 2008.

    VIEW ITEM
  • Lee Industries Double Motion Jacketed Mix Kettle, 100 Gallon, Model 100U9MS. Approximate 30" diamet...

    Used- Lee Industries Double Motion Jacketed Mix Kettle, 100 Gallon, Model 100U9MS. Approximate 30" diameter x 32-3/4" straight side. Internal rated 30 PSI at 250 degrees F. Jacket rated 100 PSI at 338 degrees F. Double motion scraper agitation. 316 Stainless steel mirror polished. 4" Center bottom outlet. Last used in sanitary application.

    VIEW ITEM
  • 100 Gallon Stainless Steel Triple Motion Vacuum Sanitary Kettle. Internal rated 15 psi at 287 Deg.F...

    Used- 100 Gallon Stainless Steel Triple Motion Vacuum Sanitary Kettle. Internal rated 15 psi at 287 Deg.F. Jacket rated 40 psi at 287 Deg.F. Sweep scraper agitator with center mounted shaft through shaft high speed homogenizer mixer. Vari-speed drive. Bolted dished top. Center bottom outlet. Built by JC Pardo. Missing motor for high shear mixer.

    VIEW ITEM
  • Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon

    Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon, Stainless Steel, Vertical. Approximate 40" diameter x 30" deep, hemispherical bottom. 3/4 Bottom jacket rated 90 psi at -20 to 320 degrees F. Top entering anchor style agitator with scrap, requires a 1.5HP, 3/60/230/460 volt, 1740 rpm, 56:89 - 1.7 ratio. Top entering offset high shear agitator, requires a 3/2HP, 3/50/60/230/460/190/380 volt, 3460/2900 rpm motor. Adjustable baffle. 2" Center bottom outlet with air actuated valve. National Board# 050, Serial# F 3316-2, Built 2000.

    VIEW ITEM
  • Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon

    Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon, Stainless Steel, Vertical. Approximate 40" diameter x 30" deep, hemispherical bottom. 3/4 Bottom jacket rated 90 psi at -20 to 320 degrees F. Top entering anchor style agitator with scrap, driven by a 1.5 hp, 3/60/230/460 volt, 1740 rpm, 56:89 - 1.7 ratio. Top entering offset high shear agitator, driven by a 3/2 hp, 3/50/60/230/460/190/380 volt, 3460/2900 rpm motor. Adjustable baffle. 2" Center bottom outlet with air actuated valve. National Board # 056, Serial # F 3316-8. Built 2000.

    VIEW ITEM
  • Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon

    Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon, Stainless Steel, Vertical. Approximate 40" diameter x 30" deep, hemispherical bottom. 3/4 Bottom jacket rated 90 psi at -20 to 320 degrees F. Top entering anchor style agitator with scrap, driven by a 1.5HP, 3/60/230/460 volt, 1740 rpm, 56:89 - 1.7 ratio. Top entering offset high shear agitator, driven by a 3/2HP, 3/50/60/230/460/190/380 volt, 3460/2900 rpm motor. 2" Center bottom outlet with air actuated valve. National Board# 052, Serial# F 3316-4, Built 2000.

    VIEW ITEM
  • Used- Hamilton Style CW Tilting Kettle, 150 Gallon,

    Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 3 hp, 3/60/208-230/460 volt, 1760 rpm gear motor, 44.32 to 1 ratio. Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 170, Serial # F-4662-1, Built 2002.

    VIEW ITEM
  • Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

    Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers(missing 1 scraper), driven by a 2 hp, 3/60/208-230/460 volt, 1750 rpm gear motor, 44.32 to 1 ratio. Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 171, Serial # F-4662-2, Built 2002.

    VIEW ITEM
  • Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

    Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 2 hp, 3/60/208-230/460 volt, 1750 rpm gear motor, approximate 44.32 to 1 ratio (no gearbox tag). Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 172, Serial # F-4662-3, Built 2002.

    VIEW ITEM
  • Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

    Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers (missing 1 scraper), driven by a 3 hp, 3/60/208-230/460 volt, 1750 rpm gear motor, approximate 44.32 to 1 ratio (no gearbox tag). Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 278, Serial # F-5817-2, Built 2004.

    VIEW ITEM
  • Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

    Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers (missing 2 scraper), driven by a 2 hp, 3/60/208-230/460 volt, 1750 rpm gear motor, approximate 44.32 to 1 ratio. Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 279, Serial # F-5817-3, Built 2004.

    VIEW ITEM
  • Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

    Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers (missing 1 scraper), driven by a 2 hp, 3/60/208-230/460 volt, 1720 rpm gear motor, approximate 44.32 to 1 ratio. Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 277, Serial # F-5817-1, Built 2004.

    VIEW ITEM
  • Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

    Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 338 degrees F. Top entering angled anchor style agitator with scrapers (missing 1 scraper), driven by an approximate 2 hp, 3/60/208-230/460 volt, 1750 rpm gear motor(no motor tag), approximate 44.32 to 1 ratio. Motorized agitator tilt, driven by a 1 hp. Motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 336, Serial # F-6667-2, Built 2005.

    VIEW ITEM
  • Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

    Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 338 degrees F. Top entering angled anchor style agitator with scrapers (missing 3 scraper), driven by an approximate 3 hp, 3/60/208-230/460 volt, 1745 rpm gear motor(motor not installed), approximate 44.32 to 1 ratio. Motorized agitator tilt, motorized bowl tilt (requires motor), pouring lip. 3" Center bottom outlet with incomplete valve assembly. Mounted on a stainless steel frame with (3) leg. National Board # 335, Serial # F-6667-1, Built 2005.

    VIEW ITEM
  • Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

    Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 338 degrees F. Top entering angled anchor style agitator with scrapers (missing 3 scraper), driven by an approximate 3 hp, 3/60/208-230/460 volt, 1745 rpm gear motor, approximate 44.32 to 1 ratio. Motorized agitator tilt, driven by a 1 hp motor. Motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 337, Serial # F-6667-3, Built 2005.

    VIEW ITEM
  • Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

    Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 338 degrees F. Top entering angled anchor style agitator with scrapers, driven by an approximate 3 hp, 3/60/208-230/460 volt, 1760 rpm gear motor, approximate 44.32 to 1 ratio. Motorized agitator tilt, driven by a 1 hp motor. Motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 338, Serial # F-6667-4, Built 2005.

    VIEW ITEM
  • Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

    Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 338 degrees F. Top entering angled anchor style agitator with scrapers (missing 1 scraper), driven by an approximate 3 hp, 3/60/208-230/460 volt, 1745 rpm gear motor, approximate 44.32 to 1 ratio. Motorized agitator tilt, driven by a 1 hp motor. Motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 339, Serial # F-6667-5, Built 2005.

    VIEW ITEM
  • Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel.

    Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 338 degrees F. Top entering angled anchor style agitator with scrapers, driven by an approximate 3 hp, 3/60/208-230/460 volt, 1745 rpm gear motor, approximate 44.32 to 1 ratio. Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 340, Serial # F-6667-6, Built 2005.

    VIEW ITEM
  • Used- Lee Kettle, Model 150DN/INA/2SP.

    Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 7.5 hp, 3/60/208-230/460 volt, 1725 rpm gear motor, 56.55 to 1 ratio. Air operated agitator tilt. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 11029, Serial # 491191-5, Built 2007.

    VIEW ITEM
  • Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon

    Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by an approximate 7.5 hp, 3/60/208-230/460 volt, 1725 rpm gear motor, 56.55 to 1 ratio (No motor tag). Air operated agitator tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 11028, Serial # 491191-4, Built 2007.

    VIEW ITEM
  • Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon

    Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by an approximate 7.5 hp, 3/60/208-230/460 volt, 1725 rpm gear motor, 56.55 to 1 ratio (No motor tag). Air operated agitator tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 11031, Serial # 49119-1-2, Built 2007.

    VIEW ITEM
  • Used- Lee Kettle, Model 150DN/INA/2SP.

    Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 7.5 hp, 3/60/208-230/460 volt, 1725 rpm gear motor, 56.55 to 1 ratio. Air operated agitator tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 11060, Serial # 49119-1-3, Built 2007.

    VIEW ITEM
  • Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon

    Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 7.5 hp, 3/60/208-230/460 volt, 1725 rpm gear motor, 56.55 to 1 ratio. Air operated agitator tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 11061, Serial # 49119-1-5, Built 2007.

    VIEW ITEM
  • Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon

    Used- Lee Industries Kettle, Model 150DN/INA/2SP, 150 Gallon, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 7.5 hp, 3/60/208-230/460 volt, 1725 rpm gear motor, 56.55 to 1 ratio. Air operated agitator tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 11030, Serial # 49119-1-1, Built 2007.

    VIEW ITEM
  • Used- Lee Industries Triple Motion Vacuum Vessel, Model 175U7S, Approximate 175

    Used- Lee Industries Triple Motion Vacuum Vessel, Model 175U7S, Approximate 175 Gallon (660 liter) Working Capacity, Stainless Steel. Removable dish top, dish bottom, rated full vacuum internal, jacketed for 100 psi at 338 f, top entering 10 hp emulsifier, top entering .75 hp agitator, top entering 3 hp anchor agitator designed for sidewall scrappers(less scrappers), on legs.

    VIEW ITEM
  • Used Greerco/Gifford Wood 1,000 Liter (250 Gallon) 316 Stainless Steel Jacketed

    Used Greerco/Gifford Wood 1,000 Liter (250 Gallon) 316 Stainless Steel Jacketed Triple Motion "Agi-Mix" Kettle/Reactor, (J.C. Pardo and Sons vessel). Vessel dimensions approx. 48 in. inside diameter x 54 in. deep, vessel is jacketed for 100 psi at 338 deg. F. Internally rated 20 psi at 250 deg. F., unit has high speed homogenizing head top driven by 25HP 3/60/460V motor. Double motion scrape surface agitation separately driven by 5HP 3/60/220-440V motor. Equipped with "tilt-out" agitation through self-contained hydraulic motor and cylinder. On stainless legs, vessel has center-bottom outlet with valve as well as Allen Bradley panel and stainless steel starter panel. Dished top head has quick opening bolts and 12 in. Diameter manway with hinged lid and sight glass.

    VIEW ITEM
  • Used- 250 Gallon Lee Kettle

    Used- 250 Gallon Lee Kettle, Model 250 D9MS. Stainless Steel, Double Motion Scrape Agitation. Jacket Rated 100 psi at 338 degrees F. 52" Diameter x 36" Deep. (3) 2" Top Inlets. 3" Discharge with Valve, 5 hp, 230/460 Volt, Reducer Ratio 16.66/1. Approximately 104 rpm output. Half Lid. (3) Stainless Steel Legs with Pads. Overall Height with Mixer 79". Mfg. 2011. Last used in a Food Application.

    VIEW ITEM
  • Used- Hamilton Jacketed Kettle, 250 Gallon

    Used- Hamilton Jacketed Kettle 250 Gallon with Triple Motion Agitation. Has Scrape Surface and Dual Christmas Tree Agitators. Jacket rated 90 psi at 320 Degree F. Model # SA. 5 hp motor into gear box with 38 rpm output on sweep. 3" Outlet with air actuated valve. Unit has temperature probe with gauge. 5' height to kettle lip and 8'6" OAH. Last used in sanitary food plant.

    VIEW ITEM
  • Used- Groen Jacketed Mix Kettle, 300 Gallon

    Used- Groen Jacketed Mix Kettle 300 Gallon with Double Motion Inclined Scrape Surface agitation. 30 rpm Scrape Surface Agitator with 68 rpm Secondary Paddle Agitator. Has a 5 hp and 2 hp motor. Jacket rated 100 psi at 338 Degree F. 3" Outlet with air actuated valve. Model INA/2/TA-300. Approximate 8' OAH. Last used in sanitary food plant.

    VIEW ITEM
  • Used- DCI Scraper Agitated Mixing Kettle, 400 Gallon, Stainless Steel, Vertical.

    Used- DCI Scraper Agitated Mix Kettle, 400 Gallon, 316 Stainless Steel, Vertical. Approximate 54" diameter x 35" straight Side, dished top and bottom. 304 Stainless steel jacket rated 100/-15 psi at -20 to 350 degrees F. Stainless steel agitator bridge with top entering anchor style agitator, sidewall scraper blades, bottom supported. Driven by a 2hp, 3/60/460 volt, 1750 rpm gear motor, 95.32 to 1 ratio. Openings top: approximate 18-1/2" manway with cover, (2) 1-1/2", (1) 2", (1) 3", (1) 3" Center Bottom Outlet. (2) Baffles. (2) Spray balls. Side lug mounted. Built 1992.

    VIEW ITEM
  • Used- Groen Jacketed Mix Kettle, 500 Gallon

    Used- Groen Jacketed Mix Kettle 500 Gallon with Double Motion Inclined Scrape Surface Agitation with Secondary Paddle Agitator. Jacket rated 100 psi at 338 Degree F. Model INA/2/TA-500. 3" Outlet with air actuated valve. Approximate 9'8" OAH. Missing 1 scraper blade. Last used in sanitary food plant.

    VIEW ITEM
  • Used- 500 Gallon Stainless Steel Alloy Fab Kettle

    Used- Alloy Fab Kettle, 500 Gallon, 316L Stainless Steel, Vertical. 54" Diameter x 48" straight side. Dish top and bottom. 3" Diameter 316L stainless steel 1/2 pipe coil jacket rated 150 psi at -20 to 400 degrees F., two separate jacket for sidewall and bottom head. Side wall baffles, Philadelphia agitator, stainless steel shaft with a 4 blade turbine, driven by a 15hp motor. Various top openings, center bottom outlet. Mounted on (4) pipe legs.

    VIEW ITEM
  • Used Groen 600 Gallon Stainless Steel Kettle

    Used- Groen Kettle, 600 Gallon, 316 Stainless Steel, Model PA-600. Approximate 62" inside diameter, Flat top with hinged covers, hemi bottom. Jacket rated 50 PSI at 300 Degrees F. Bridge mounted anchor style agitator with scrapers driven by a 3 phase, 230/460 Volt, 1725 RPM varispeed motor. 3" Bottom outlet. Mounted on (4) approximate 3" diameter legs.

    VIEW ITEM
  • Used- Feldmeier Stainless Steel Double Motion Processor / Kettle, Approximately

    Used- Feldmeier Stainless Steel Double Motion Processor / Kettle, Approximately 800 Gallons, 304 Stainless Steel, Vertical. Approximate 60" diameter x 64" straight side, dished top and bottom. Jacket Rated 125 PSI at 300 Degrees F. Openings top: 18" manway with cover, (5) 3". (2) 3" Bottom outlets. Top entering anchor style agitator, missing scraper and drive. Inner bar type agitator, missing drive, bottom supported. Mounted on (4) legs. Serial# E-423-04, National Board# 6044, Built 2004. Missing Drive.

    VIEW ITEM
  • Used- Mueller Kettle, Approximate 1500 Gallon, Model PCPC-12,000#

    Used- Mueller Kettle, Approximate 1500 Gallon, Model PCPC-12,000#, 316L Stainless Steel, Vertical. Approximate 78" Diameter x 78" straight side, dished top, coned bottom. Internal 50 psi @ 350 deg F. Jacket rated 150 psi. Top entering Chemineer agitator, Model 2HTN-2, Serial # 1-99324-3, output rpm 37, approximate 2" diameter shaft with (2) 4 blade turbines, driven by a 3 hp, 3/60/208-230/460 volt, 1720 rpm motor. Side wall baffles. Top man way, center bottom outlet. Mounted on 4 stainless steel legs. Serial # 82398. ASME NB Rated.

    VIEW ITEM
  • Used- 10,000 Liter Olsa Twin Motion Vacuum Kettle, Model 400

    Used- 10,000 liter (2642 gallon) Olsa Twin Motion Vacuum Kettle, Monel 400 construction. Approximately 90" diameter x 98" straight side, semi elliptical removable top, semi elliptical bottom, jacketed on bottom and full straight side rated 65.3 psi at 203 degree F. Ancho agitator with side wall scrap driven by 37 kw, 440 volt motor, 5-19 rpm shaft speed. Inner opposing paddle agitator driven by 18.5 kw, 440 volt motor, 8-32 rpm shaft speed, 15" top manway, 4", (4) 3", (4) 2", (6) 1.5" top nozzles, 4" bottom outlet, on 6 legs. Ross Engineering control panel with Square D Altivar 58 VFD motor controllers, 460 volt, panel Serial # 201-006. Jacket certified by ICOSS, Serial# 483. National Board # 125. New 2001.

    VIEW ITEM
  • Used- Walker 3000 Gallon Sanitary Jacketed Mix Tank/Kettle/Processor

    Used- Walker 3000 Gallon Sanitary Jacketed Mix Tank/Kettle/Processor with Sweep Agitation and Scraper Blades. Model PZ-CB. Jacket rated heat 15 psi at 250 Degree F or Cooling 100 psi at 100 Degree F. Driven by 3/6 hp, 230 volt, 850/1750 rpm motor into SEW gear reducer with 7/14 rpm output. Dome top and Cone Bottom. Last used in Food Plant. 8' diameter x 8'6" straight side. Approximate 16'6" OAH.

    VIEW ITEM
  • Used- Damrow Cheese Vat, Model Double 00, Approximately 4,500 Gallon

    Used- Damrow Cheese Vat, Model Double 00, Approximately 4,500 Gallon Capacity, Stainless Steel. Internal dimensions are 15'2" long x 6'10" high. Complete with agitation with wide sweep agitator paddles, driven by 5 hp, 3/60/230/460 volt, 1170 rpm, motor. Includes (2) 4" diameter discharge openings at 6" and 35" off ground. Previously used at major dairy processor.

    VIEW ITEM
  • Used- Damrow Cheese Vat, Model Double 00, Approximately 4,500 Gallon Capacity, S

    Used- Damrow Cheese Vat, Model Double 00, Approximately 4,500 Gallon Capacity, Stainless Steel. Internal dimensions are 15'2" long X 6'10" high. Complete with agitation with wide sweep agitator paddles, driven by 5 HP, 3/60/230/460 volt, 1170 RPM, motor. Includes (2) 4" diameter discharge openings at 6" and 35" off ground. Previously used at major dairy processor.

    VIEW ITEM
Cash Icon
Surplus Equipment?

We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.

SELL YOUR EQUIPMENT
Search Icon
Browse Inventory

View our entire process equipment inventory online or visit our location for an equipment inspection.

View Inventory
Phone Icon
Contact Us

Email or call us to speak with an equipment specialist to answer any machinery questions you may have.

630-350-2200