Used Volumetric Feeders

Stock# 51311003

Used- 2CF Auger Powder Feeder, Stainless steel, Approximately 2", With 1 HP Motor.

Stock# 50388015

Used- Brabender Technologie Loss In Weight Feeder, Model DDW-MS-FW155N-600-ISC. Approximate 6" diameter x 40" long blade screw, maximum feed rate 816 cubic feet per hour. Top mounted 600 liter extension hopper. Mounted on a carbon steel frame. Serial # WO19739/1. Built 2012.

Stock# 49793004

Used- HAF Equipment Feeder/Dust Collection System. Consisting of: (1) HAF Equipment 9" volumetric tube screw feeder, Model VTF900GI, Serial # 19814-5, carbon steel. Approximate 90" long screw driven by a 5 hp, 3/60/230/460 volt, 1750 rpm motor with reducer, ratio 30.15 to 1. (1) HAF Equipment surge hopper, 102 cubic feet, carbon steel, Serial # 19814-4R1. 60" wide x 60" long x 36" straight side x 48" coned bottom, bolt on top cover. (1) HAF Equipment dust collector, 254 square feet filter area, carbon steel. Housing measures approximate 48" diameter x 80" straight side x dished top, 52" coned bottom. (24) 1 Meter envelope filters, side access door, side air inlet and outlet, center bottom outlet with a manual valve. Includes (1) Hartzell blower, Model A07T4153-PB100STFCMZ, Serial # 1422006. Rated 10 cfm at 12" S.P., driven by a 7.5 hp, 3/60/230/460 volt, 3510 rpm motor. (1) Control panel with (3) Allen-Bradley PowerFlex 523 drives. Built 2014.

Stock# 49118014

Used- MetalFab Volumetric Screw Feeder, Model DB2-6, 304 Stainless Steel. Approximate maximum feed rate 500 cubic feet per hour. Approximate 6" diameter x 102" long screw. End feed hopper, enclosed tube, end bottom outlet. Driven by a 3hp, 3/60/460 volt, 1765 rpm motor. Mounted on a carbon steel base. Serial# 91358.

Stock# 49118015

Used- MetalFab Volumetric Screw Feeder, Model DB1-4, 304 Stainless Steel. Approximate maximum feed rate 175 cubic feet per hour. Approximate 4" diameter x 52" long screw. End feed hopper, enclosed tube, end bottom outlet. Driven by a 1hp, 3/60/230/460 volt, 1745 rpm motor. Mounted on a carbon steel base. Serial# 892068.

Stock# 49118016

Used- MetalFab Volumetric Screw Feeder, Model DB1-4, 304 Stainless Steel. Approximate maximum feed rate 175 cubic feet per hour. Approximate 4" diameter x 52" long screw. End feed hopper, enclosed tube, end bottom outlet. Driven by a 1hp, 3/60/230/460 volt, 1745 rpm motor. Mounted on a carbon steel base. Serial# 892068.

Stock# 49118003

Used- MetalFab Volumetric Screw Feeder, Model DB2-6, 304 Stainless Steel. Approximate maximum feed rate 500 cubic feet per hour. Approximate 6" diameter x 102" long screw. End feed hopper, enclosed tube, end bottom outlet. Driven by a 3hp, 3/60/460 volt, 1765 rpm motor. Mounted on a carbon steel base. Serial# 91358.

Stock# 49118004

Used- MetalFab Volumetric Screw Feeder, Model DB2-6, 304 Stainless Steel. Approximate maximum feed rate 500 cubic feet per hour. Approximate 6" diameter x 96" long screw. End feed hopper, enclosed tube, end bottom outlet. Driven by a 1.5hp, 3/60/208-230/460 volt, 1725 rpm gear motor, ratio 11 to 1. Mounted on a carbon steel base. Serial# 296005.

Stock# 46971231

Used- Metso Single Screw Plug Feeder. Approximate 12" diameter x 72" long. 75 hp motor with Falk reducer, ratio 55.78 to 1. Axton Hastelloy SB-575 high shear mixer. Rated 300 psi at 420 degrees F. 50 hp motor. National Board # 558. Serial # 71686. Built 2013.

Stock# 44268212

Used- Meyer Dual Station Mix/Blend, Model MB/2 ** SALE SUBJECT TO SELLER'S APPROVAL **

Stock# 44268214

Used-Meyer Dual Station Mix/Blend, Model MB/2 ** SALE SUBJECT TO SELLER'S APPROVAL **

Stock# 45856010

Used- Schenck Accurate Volumetric Feeder, Type MOD602M. Stainless Steel screw and spout, 2.25" diameter x 21" long spout with screw, driven by approximately 0.25 hp DC motor, stainless steel hopper extension with top mounted Premier pneumatic loader/receiver with slide gate valve, Schenk serial #86518-01B-602. Missing controller.

Stock# 45176028

Used- Taylor Products Volumetric Feeder. 3" Diameter x 36" Stainless Steel Screw. ** SALE SUBJECT TO SELLER'S APPROVAL **

Stock# 44496019

Used- Thayer Gravimetric Belt Feeder. Approximate 15" wide x 42" long feed belt. Includes PI-164 programmable integrator, motorized rotary valve at belt discharge. Feeder mounted on a stand supplying approximate 42" discharge height, 12" from rotary valve. Serial# 164-1901.

Stock# 49145001

Used- Coating Drum Powder Feed Screw, 304 Stainless Steel, Approximate 3" diameter x 142" long screw, driven by a 3 hp, 3/60/208-230 volt, 1740 rpm gear motor, 20.51:1 ratio. Mounted on a stainless steel frame with casters. No manufacturers tag.

Stock# 49118001

Used- Vibra Screw Screw Feeder, 304 Stainless Steel. Approximate capacity 1480 cubic feet per hour. Approximate 10" diameter x 82" long screw, maximum 100 rpm. End feed hopper, enclosed tube, end bottom outlet. Driven by a 3 hp, 3/60/230/460 volt, 1735 rpm gear motor, ratio 18.5 to 1. Mounted on a carbon steel base. Serial# 851659.

Stock# 49118002

Used- Vibra Screw Screw Feeder, 304 Stainless Steel. Approximate capacity 1480 cubic feet per hour. Approximate 10" diameter x 144" long screw, maximum 100 rpm. End feed hopper, enclosed tube, end bottom outlet. Driven by a 3 hp, 3/60/208-230/460 volt, 1715 rpm gear motor, ratio 18.5 to 1. Mounted on a carbon steel base. Serial# 851660.

Stock# 49118005

Used- Vibra Screw Screw Feeder, 304 Stainless Steel. Approximate capacity 740 cubic feet per hour. Approximate 8" diameter x 128" long screw, maximum 100 rpm. End feed hopper, enclosed tube, end bottom outlet. Driven by a 3 hp, 3/60/230/460 volt, 1735 rpm gear motor, ratio 18.5 to 1. Mounted on a carbon steel base. Serial# 851662.

Stock# 49118006

Used- Vibra Screw Screw Feeder, 304 Stainless Steel. Approximate capacity 740 cubic feet per hour. Approximate 8" diameter x 68" long screw, maximum 100 rpm. End feed hopper, enclosed tube, end bottom outlet. Driven by a 3 hp, 3/60/460 volt, 1765 rpm gear motor, ratio 18.5 to 1. Mounted on a carbon steel base. Serial# 851661.