Used Plastics Recycling Lines

Stock# 49391001

Used- Plastic Recycling Line. Includes: (3) 130mm PreAlpina recycling extruders. (2) vertical forcefeeders, (1) horizontal, (3) face cutting pelletizing heads, (2) 105mm PreAlpina Recycling extruders, both horizontal forcefeeders, both face cutting pelletizing heads. (1) RS30 Untha 4 rotor shredder, 36kw. (2) MS630 Moreta staggerd blade 30kw granulators. (2) 7 rotary slanted blades and 4 stationary bladed 30kw granulators. (1) Sorema washing machine, horizontal Buckau-wolf rotary dryer, 15kw with (3) 4kw blowers. 7.5kw transport fan. 151kw heat tower with 18.5kw centrifuge for mixing hot air with damp plastic. System run with plc control. (1) 57kw horizontal drier.

Stock# 49876001

Used- Erema- RGA 63 T Plastic Recycling Line (cutter/extruder combination). With an approx. 242-286 lbs./hr. (110-130 kgs/hr.) output HDPE. with an approx. 264-330 lbs./hr. (120-150 Kgs/hr.) output PP consisting of: (1) Erema pre-cutter, type G28-L-1 for precutting HDPE and PP to fiber length of 1.95-3.9" (50-100 mm). Incl. 4 knives. 6HP/4KW-400volt/50cycle/3Ph motor. (1) Erema belt conveyer, type FB 5040/600. 164" (5040 mm) long x 19" (600 mm) width belt. 0.37HP/0.25KW-400 volt/50cycle/3Ph motor, incl. metal detector. (1) Erema cutter/extruder combination, type RM 63 T, 63 mm single screw,2 zone barrel, not vented. Max. screw speed 170 RPM. Driven via a gearbox by a 45HP/30Kw-400volt/50cycle/3Ph motor. Incl. various indicators. (1) Erema screen changer, type SW4/82 RTF. 4 x 3.2" (82 mm) dia. screens. Max melt pressure 6000 psi (400 bar). Hydraulic driven. Incl. partial backflush system. (1) Erema hot die face pelletizer, type HG 100. 2 knives. 700-5000 RPM knives speed by a 2.25HP/1.5 Kw-400volt/50cycle/3Ph motor. Electrically heated, water cooled. (1) Erema pellet dewatering screen, type GS 1500. Stainless steel vibrating screen construction. 46" (1400 mm) long x 0.97 (300 mm) width. Separation of lumps bigger than 0.78" (20 mm). Water circulating system incl. pump driven by a 2.25HP/1.5Kw-400volt/50cycle/3Ph motor. (1) Heat exchanger, type GS 1500. Heating surface 2.5 m2 incl. water control. (1) Erema pellet centrifugal dryer, type GZ 350. Stainless steel. 350 mm dia x 300 mm long screen basket. 3.5" (90 mm) dia. outlet cross section. Driven by 3.3HP/2.2KW-400 volt/50 cycle/3 Ph motor. (1) Erema injector type pneumatic conveyer, type IFG 10. Stainless steel. Driven by a 1.1HP/0.75-400 volt/50 cycle/3 Ph motor. (1) Erema cyclone/silo combination, type ZS 700. Capacity 190.5 gallon (720 liter). Suitable for octobin. Incl. control system/panel. Line in equipped with further infrastructure. New year 1995.

Stock# 49325001

Used- Erema Plastic Recycling Line, Model RB120FVE. 12 zone, auto die change, hot die face cutter, model HG242P. 2 stage dewatering and screening. Durolex GS2000. Airlift to bulk bin/bag fill or bulk storage with controls. Approximately 20 ton supply silo. Screw outfeed to dual blending feeds. Extruder feed belt with Mesutronic magnetic separator. Mfg. 2005.

Stock# 49325002

Used- Erema Plastic Recycling Line, Model RB120FVE. 12 zone, auto die change, hot die face cutter, model HG242P. 2 stage dewatering and screening. Durolex GS2000. Airlift to bulk bin/bag fill or bulk storage with controls. Approximately 20 ton supply silo. Screw outfeed to dual blending feeds. Extruder feed belt with Mesutronic magnetic separator. Mfg. 2005.

Stock# 46482005

Used- Erema Plastic Recycling line consisting of: (1) Erema model RM 160 MFG 1992 backflow extruder, 160mm screw, approximate 108" long, 4 zones, electrically heated, air cooled, non-vented, approximate 17:1 L/D. Driven by 250hp,3/60/480 volt, 1785 rpm motor with gearbox, 70 to 1 ratio, serial# C 2/006, built 1992. Fed by a densifier, approximate 50 diameter, driven by a 110kW motor with model RZ 160 reel feeder, built 1999, (1) infeed conveyor, approximate 27-3/4" wide x 136" long driven by a 3hp, 3/60/230/460 volt, 1735 rpm gear motor, 24.94 to 1 ratio. (1) Erema Back flushing horizontal screen changer, model SW 4/170RTF, 170mm Breaker plate size, built 1992. (1) Hot die face pelletizer, model HG 242 having approximate 64 holes, built 2006. (1) Pellet dewatering screen, (1) Erema pellet centrifugal dryer, model GZ 350.

Stock# 47318001

Used- Erema Complete Recycling System, Model 1718 TVE-DD-LF, 2/350-HG 342. Manufactured new in 2006. Approximate 180mm screw diameter double vented barrel with vacuum system. Equipped with a Erema laser screen filter, model LF 2/350. Extruder driven by a 400 kW motor and the cutter/compactor driven by a 370 kW drive. Unit is fed with an Erema model FB 10000/1200 incline belt conveyor with metal detector, approximately 33 long x 47" wide. (1) Erema hot die face pelletizer, (1) pellet dewatering screen, model GS3000/2, (1) centrifugal dryer, model GZ 500/100. Includes control panel with Siemens controls. (1) 50hp blower, (1) rotary air lock, (2) Dean centrifugal pumps, (1) Taco plate heat exchanger, (1) goulds pump, (1) cyclone, and misc. parts, piping and mezzanine.

Stock# 47560002

Used- Erema Film/Fiber Pelletizing Line. Consisting of: (1) 100MM (4") Erema Model RM100TVE extruder, Serial# P00/001. Extruder driven by a 132KW AC motor with inverter. Electrically heated water cooled barrel, dual vent, with Erema steel vacuum pump. Temperature control panel with Erema Series 988 instruments (16 zone total) and Eisenbliss Model EG250 gearbox, Serial# EF100120/2. Includes an approximate 33 cubic foot stainless steel cutter compactor, driven by a 90KW, 460 volt motor. Extrusion line was reconditioned in 2013 with new Screw and new motor for the cutter. Cutter compactor is fed by a 33" wide x 20 long inclined conveyor. Extruder is equipped with an approximate 40 hole single row die plate with a 4 blade cutter head and water ring pelletizing system. Includes water pump, and heat exchanger for barrel and pellet cooling. Has stainless steel slushway with vibrating screen classifier and pellet drying centrifuge.

Stock# 41325014

Used- EXTRUDEX Complete Strand Granulating Line, SRE 80-30. Maximum capacity 265 lbs/h (120 kg/h) depending on material. 49.60 hp (35 kW) extruder drive. Consisting of (1) single-screw 3.15“ 80 mm, 30 L/D, (1) venting port, large infeed screw for low bulk-weight as expanded PS flakes, strand-die head, water bath 1’31” x 7’87” (400 x 2400 mm), strand - blower / cooler, Scheer SGS 100 E granulator with a 4 hp (3 kW) drive.

Stock# 48180001

Used- MAS Recycling Line. Consisting of: (1) MAS Maschinenund Anlagenbau Schulz GmbH twin screw extruder, type MAS 90-280, conical screw with a diameter 6.9" (177 mm) at feed zone and 3.5" (90 mm), screw speed 150 rpm. 6 heating zones, electrically heated, oil/water cooled, new 2014. (1) NordsonBKG GmbH screen changer K SWE 180 4 K 75 RS, new 2014. (1) NordsonBKG GmbH under water pelletizer, type CCR2 including melt pump, type GPE 110/110-02, new 2014. (1) Busch vacuum pumps and systems GmbH water pumps and exhaust cooler, type Combi BR 1800, new 2014. (1) Ekomak Kompresor AS air compressor, type 37 DVST, 6cbm/min at 120 psi (8 bar). 37 kW (50 HP) with ABB invertor included Cariac Dryer CAD 170 (A11) 400/3/50 and Ekomak 529 gallon (2000 liter) pressurized air storage tank 165 psi (11 bar), new 2014. (1) Aksa diesel generator, type AD 550, 500 KVA primary/550 KVA standby 400/231 volt including fuel tank 225 gallon (850 liter), new 2014. Includes Kreyenborg plant technology conveyers, big bag station, type 120, feeders, mixing station. PLC control system, new 2014. Last used in PET application.

Stock# 48639001

Used- NGR Plastic Recycling Line. Capacity of 88-176 lbs pp/rr. (40-80 kgs/hr.) consisting of: (1) NGR conveyer belt, type CB04-04 including metal detector. (1) NGR shredder/extruder, type A:Gran 65-40 HD, 65 mm diameter single screw. 21:1 L/D, electrically heated, air cooled. Driven by a 67.5 hp/45 Kw-400volt/50cycle motor. (1) NGR manual screen changer, type MSC 60. 2.36” (60 mm) diameter (1) NGR water ring pelletizer/drying unit, type HD 100. 2 blades, 2.25 hp/1.5 Kw-380volt/50 cycle/3ph motor. (1) NGR injection blower with cyclone, type DS_Sonder. (1) Siemens touch panel. New 2013. 1335 hr. in service (55 days). Last used in PP application.

Stock# 46201001

Used- NGR Next Generation Underwater Granulation Recycling Line Rated Up To 220 Pounds Per Hour (100 Kg). System consists of: (1) NGR 2-1/2" (65mm) cutter feeder single screw extruder, type A-Gran 65. Approximate 33 to 1 L/D ratio. Electrically heated, air cooled, dual side vented barrel with maintenance covers and a Sihi modular vacuum pump system, Model LEMA51AZAAE0A7AW, Serial# D-03-80177-01, driven by a 1.5 kw motor, with a Sondex type S41C heat exchanger, Serial# 43044047, and Sterling separator tank. Extruder and grinder both driven by (1) 45 kw motor thru a PIV gearbox, type PC16-T60-H13-20, ratio 21.1 to 1. Enclosed feed throat with a rotary cutter, (2) pneumatic piston ram, tapered feed screw, and a feed hopper with sight window. Approximate 42" centerline height. Includes a control panel with a Vacon drive, and an operator panel with a Mitsubishi E1071 touch screen. Serial# UWGQ-03045, built 2004. (1) Kreyenborg screen changer, Model AV025, Serial# 19562, built 2001, (1) Econ 2.2 kw power pack, (1) BKG underwater pelletizer, type UWB-A300, Serial# 2003-02-16. Includes a cutting chamber, driven by a 4.4 kw motor, mounted on a stand. (1) BKG stainless steel spin dryer, type Master A 300, Serial# 2003-02-16. Approximate 12" diameter x 36" tall rotor with screen, driven by a 4 kw motor. Includes a Lammers type LAF010/17-52-2 0.55 kw blower, KSB 2.2 kw centrifugal pump, (1) Kreyenborg stainless steel holding tank, (1) Funke heat exchanger. All mounted on a common base with (2) control panels with Commander SE drives.

Stock# 47562001

Used- NGR Next Generation Recycling Machine 65mm (2.55") Single Screw Extruder, Model A-GRAN 65 HD. Approximate 33 to 1 L/D ratio. Electrically heated, air cooled non vented barrel. Feed throat, no hopper with an approximate 15.3" wide single roll shredder with dual piston ram press. Water cooled feed throat into screw. Approximate 42" centerline height. Driven by an approximate 55 kw motor thru a reducer. Includes an operator control panel with a Magelis display, a manual screen changer, and a control panel. Approximate up to 100 kilograms per hour of pellet output. Serial# Q-01002. Built 2001.

Stock# 47939001

Used- NGR Next Generation Underwater Granulation Recycling Line. Rated up to 220 pounds per hour (100 Kg). System consists of: (1) NGR 2-1/2" (65mm) cutter feeder single screw extruder, type S-Gran 65 V HD. Approximate 33 to 1 L/D ratio. Electrically heated, air cooled, dual side vented barrel. (1) Double screen changer (1) Pelletizer (1) Spin dryer (1) Belt conveyer (1) Control panel. Complete with infrastructure. New 2004.

Stock# 47928001

Used- OMP Prealpina ES130 Recycling Extruder. Suitable for PE/PP/PS/ABS heavy regrind, feeding hopper, screw/barrel 130 mm. Degassing vacuum pump, screen changer, die face water pelletizer, control panel. Reported to be reconditioned.