Used Industrial Mixers & Blenders for Sale
Used industrial mixers and used blenders are processing systems designed to combine, disperse, emulsify, or homogenize materials across a wide range of industries. These machines handle powders, granules, liquids, and high-viscosity materials in both batch and continuous operations. Common applications include food processing, chemicals, pharmaceuticals, plastics, and cosmetics manufacturing. Aaron Equipment offers a large inventory of used industrial mixers and blenders in various configurations to support specific mixing requirements, production capacities, and material characteristics.
Stock No.:
52106003In-Stock Paul O. Abbe 0.25 Gallon Sigma Mixer with Jacket & VFD Controls
New and In-Stock Paul O. Abbe Model SBM-0.25 Laboratory Sigma Blade Mixer. .25 Gallon Working Capacity. Double U" shaped bowl casting machined on center line. Removable idle end allows blades to be removed. 304 SS. Rated Vacuum Internal. Internal and External welds are continuous, ground smooth, flush and pit free. Internal Surface is 180 Grit, 20-30 Ra. External Surface is Glass Bead Blasted. Free flowing open jacket with baffles for even distribution of heating media. Jacket is constructed of 304 SS and rated 14.7 psig @ 400 Deg. F with NPT Connections. Insulation Shroud is 1" Chloride Free Rock Wool with welded SS Shroud. Cover is a Clear Lexan design with Manual Clamps and Safety Switch. Thermowell is mounted through the Lexan Cover. Manual Tilt to Approx. 105 Degrees. Blades are Cast 304 SS Tangential Sigma Design. Four (4) PTFE packing glands with adjustable stainless-steel followers. Four (4) sealed roller bearing on the drive side only. Driven by a HP all stainless steel motor and stainless steel reducer. 304 SS Support Frame. Controls are NEMA 4X Stainless Steel and Supplied Loose. Includes- HP ABB VFD, Speed control potentiometer, RPM readout (front blade speed), Product temperature readout, Start/stop push buttons, Dual pushbuttons for discharge (see drawing below), Forward/reverse switch, Integration of limit switch on cover, Electrical input: 460 volt, 3-phase, 60 Hz, Dimensions 12" W X 24" H x 24". This Mixer is Brand New and In-Stock. Ready for Immediate Delivery and comes with a 1 Year Warranty. It can be inspected under power in our shop in Belvidere, IL.
MFR: Paul O Abbe
Stock No.:
80685Used Patterson-Kelley 8 Qt Twin Shell Dry Blender – 0.26 Cu. Ft., 304 SS, 1/8 HP Motor
Used- Patterson-Kelley Twin Shell Dry Blender, (0.26) Cubic Feet (8 quart) Capacity, 304 Stainless Steel. (2) 7-1/2" Diameter x 13" long shells, 2 charge ports with (1) cover, (1) missing, oval bottom outlet with cover. Driven by a 1/8 hp, 1/60/115/230 volt, 1725 rpm gearmotor. Mounted on stand.
MFR: Patterson Kelley
Stock No.:
53031007Used Winkworth Z2 Vacuum Double Arm Mixer – 1.75L, 316 SS, Industrial
Used- Winkworth Vacuum Double Arm Mixer, Model Z2 Vacuum, 316 Stainless Steel. Working capacity 1.75 liters. Approximate 140mm (5.5") x 140mm (5.5") x 109mm (4.29") deep jacketed vacuum trough. Internal rated 60 psi at 300 degrees C (572 F). Jacket rated for 3.5 bar (50psi) at 300 degrees C (572 F). Dual overlapping sigma style mixing blades. Driven by a .37kw (1/2hp), 3/60/460 volt, 1690 rpm gear motor, manual speed control, output 19 to 95 rpm. Top vacuum cover with 2.5" sight glass. Control panel. Includes VWR international model 1166 temperature controller. Base mounted on cart. Serial# 16564.
MFR: Winkworth
Stock No.:
48681Used Tokushukika Kogyco Agi-Homo Mixer – 20 Gal, 316 SS, Hydraulic Tilt, Jacketed
Used- Tokushukika Kogyco Co Ltd Agi-Homo Mixer, Model 20-50. 20 Gallon (75 liter) working capacity. 316 Stainless steel polished interior. Stainless steel jacketed rated to 40 psi (2.6 bar). Tiltable bowl 18-1/2" (476 mm) diameter x 18-1/2" (476 mm) deep. Counter rotating paddle agitator with end scrapers. 0.4 kw (0.6 hp) 220 volt. In combination with homo mixer. 2-3/4" (97 mm) diameter turbine blade, 1.5 kw (2.25 hp) 220 volt. Hemi bottom. Dish top with hydraulic tilt. 0.75 kw (1.12 hp) 220 volt. 1-1/2" (41 mm) cbo with shut-off valve. Unitized with separate control panel and starters. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Tokushu Kika
Stock No.:
40425079Used AMK VIU4 4-Liter Extrusion Kneader Mixtruder – Stainless Steel Sigma Blade Mixer Extruder with Vacuum Cover
Used- 4 Liter AMK Extrusion Kneader Mixtruder, Model VIU4. Stainless steel construction, vacuum cover, approximately 8" x 8" x 7.5" deep mixing changer, tangential sigma blades driven by 2.2 kw motor drive, discharge extruder driven by 1.5 kw motor drive, jacketed bowl and extruder barrel, on base, serial# 12202. Built 1985.
MFR: AMK
Stock No.:
11059351Used Munson Industrial Rotary Blender – Model MX-1-SS
Used- Munson Industrial Rotary Blender, Model MX-1-SS. 1 cubic foot capacity; Stainless steel mixing chamber; Equipped with liquid spray nozzle. Mounted on portable stand with tilt discharge capabilities. Serial# 12190.
MFR: Munson Machinery
Stock No.:
52879001sed Aaron Process Lab Sigma Blade Mixer – 1 Gallon – Model LNG-1 – 304 SS – Vacuum Rated – Jacketed – 2 HP DC – With Controls
Used- Aaron Process 1 Gallon Lab Sigma Blade Mixer. Model LNG-1. 304 Stainless Steel bowl measures 7" wide x 9-3/8" long x 8-3/4" deep. Vacuum rated. Top Cover with (2) 2" sight glasses. Jacketed 14.7 psig at 400 degree F. Manual tilt with handle. 2 hp DC motor, 180 volt, 1750 rpm, 9.4 amps. TEFC. 25/1 gearbox ratio. Includes control panel. Speed control with readout, start/stop and E-Stop.
MFR: Aaron Process
Stock No.:
50140001Used Paul O. Abbe Lab Double Arm Mixer – Model 1BSB, 1 Gal, 316 SS, Hydraulic Tilt
Used- Paul O. Abbe Lab Double Arm Mixer, Model 1BSB, 316 Stainless Steel. 1 Gallon operating capacity (2 total). Carbon steel jacket rated 14 psi. Bowl approximate 7" left to right x 9-1/2" front to back x 6-3/4" deep, tangential sigma blades, front blade 70 to 17 rpm, rear blade 41 to 10 rpm, flat top cover, geared one end. Single ram hydraulic tilt with power pack. Mixer driven by a 2 hp, 3/60/230/460 volt, 814 rpm variable speed motor with reducer. Mounted on legs with base. Serial # A41282.
MFR: Paul O Abbe
Stock No.:
50140002Used Paul O. Abbe Lab Double Arm Mixer – Model 1SBM, 1 Gal, 316 SS, Hydraulic Tilt
Used- Paul O. Abbe Lab Double Arm Mixer, Model 1SBM, 316 Stainless Steel. 1 Gallon operating capacity (2 total). Carbon steel jacket rated 14 psi. Bowl approximate 7" left to right x 9" front to back x 7-3/4" deep, overlapping sigma blades, front blade 53.9 to 13.9 rpm, rear blade 53.9 to 13.9 rpm, flat top cover, geared one end. Single ram hydraulic tilt with power pack. Mixer driven by a 2 hp, 3/60/230/460 volt, 1725 rpm variable speed motor with reducer. Mounted on legs with base. Serial # A39823.
MFR: Paul O Abbe
Stock No.:
54501001Aaron Process LNG-1 1-Gallon Vacuum Jacketed Stainless Steel Sigma Blade Mixer
Used Aaron Process 1-gallon laboratory double-arm sigma blade mixer, Model LNG-1, featuring a 304 stainless steel mixing bowl measuring 7" wide x 9-3/8" long x 8-3/4" deep. The vacuum-rated bowl includes a top cover with two 2" sight glasses and a jacket rated for 14.7 pounds per square inch gauge at 400 degrees Fahrenheit. Equipped with manual handle-operated tilt, a 2-horsepower TEFC DC motor rated for 180 volts, 1,750 rpm and 9.4 amps, and a 25:1 gearbox ratio. Includes a control panel with adjustable speed control, digital speed readout, start/stop controls and emergency stop. Suitable for laboratory mixing, blending and kneading applications involving small batches of viscous or paste-like products.
MFR: Aaron Process
Stock No.:
53323001Used Premier Mill PLM5 Planetary Mixers – 5L Jacketed, 304 SS (1 Working, 1 for Parts)
Used- (2) Premier Mill Planetary Mixers, Model PLM5, 304 Stainless Steel. 5 Liter(1.3 gallon) total capacity, 3 liter(.08 gallon) working capacity. Jacketed mixing can approximate 8-1/2" diameter x 5-1/2" deep. (1) working mixer built 2008, and (1) mixer for parts built 2005.
MFR: Premier
Stock No.:
54250001Used Shanghai Junyu JYC-500 Coating Drum for Sale – Stainless Steel, 1.5 HP Moto
Used Shanghai Junyu Food Machine Co., Lt Coating Drum, Model JYC-500, Stainless Steel. Approximately 40" diameter x 62" long. Driven by a 1.1kW (1.5hp), 1400rpm motor. Approximate 1-3/4" tall flights with 10" spacing. 19-1/2" infeed and outfeed. Control panel with Delta MS-300 drive. Mounted on a stainless steel frame. 3/60/220 Volt.
Types of Used Mixers Available
Aaron Equipment offers a wide selection of used industrial mixers and blenders designed for different materials, viscosities, and processing requirements:
Disperser Mixers – High-speed mixers designed for dispersing powders into liquids and breaking down agglomerates.
Double Arm Mixers – Heavy-duty mixers used for kneading high-viscosity materials such as rubber, adhesives, and doughs.
Double Cone Mixers & V-Blenders – Tumbling blenders ideal for achieving uniform mixing of dry powders and free-flowing solids.
Ribbon Blenders – Horizontal mixers with internal ribbon agitators for efficient blending of powders and light pastes.
Paddle Mixers – Low-shear mixers designed to gently blend fragile, heat-sensitive, or bulk solid materials.
Planetary Mixers – Mixers with rotating blades and bowls for thorough mixing of viscous, dense, or sticky materials.
Mixer Applications & Industry Uses
Used industrial mixers and blenders are widely used in processes where material consistency and uniformity are critical. Common industry applications include:
Food & Beverage: Blending powders, doughs, sauces, spices, and nutritional products
Pharmaceutical & Nutraceutical: Uniform mixing of active ingredients and excipients
Chemical Processing: Production of coatings, resins, adhesives, and specialty chemicals
Plastics & Polymers: Compounding materials prior to extrusion or molding
Cosmetics & Personal Care: Mixing creams, lotions, gels, and emulsions
Cannabis Processing: Blending biomass, oils, and infused products
Used Mixer Buying Considerations
When selecting used industrial mixers and used blenders, it is important to evaluate both process requirements and equipment specifications:
Material Type & Viscosity: Match mixer design to product flow and shear requirements
Batch vs. Continuous Operation: Select equipment based on production volume and workflow
Agitation Style: Ribbon, paddle, planetary, or high-shear depending on mixing goals
Capacity & Throughput: Ensure vessel size and motor power align with production needs
Material of Construction: Stainless steel for sanitary or corrosive environments
Condition & Prior Use: Review maintenance history and previous application
Why Buy Used Industrial Mixers & Blenders
Buying used industrial mixers and used blenders provides a cost-effective solution for expanding or upgrading processing operations. Used equipment reduces capital investment while offering reliable performance from proven designs. Many units are available for immediate shipment, helping minimize downtime and accelerate installation timelines. With a wide range of sizes, configurations, and manufacturers available, used mixers offer flexibility for facilities with evolving production needs.
Sell Your Used Mixers
Aaron Equipment actively purchases surplus and used industrial mixers and blenders. Whether you are upgrading equipment, shutting down a line, or liquidating assets, our team can help maximize the value of your equipment.
Industrial mixers are used to combine, blend, or homogenize materials such as powders, liquids, and slurries. They are essential in industries like food processing, chemicals, pharmaceuticals, and plastics where product consistency is critical.
A mixer typically handles a wider range of materials, including high-viscosity substances, using mechanical agitation. A blender is generally used for dry powders or free-flowing solids where gentle, uniform mixing is required.
Choosing the right mixer depends on material properties, viscosity, batch size, and required mixing intensity. Evaluating agitation type, capacity, and construction material helps ensure compatibility with your process.
Yes. Used industrial mixers are often built for long service life and can remain highly reliable when properly maintained and inspected prior to purchase.
Ribbon blenders, paddle mixers, and V-blenders are commonly used for powders due to their ability to achieve uniform mixing without excessive shear or material degradation..