Used Wipe Film and Thin Film Evaporators
Below is Aaron's inventory of unused and used wipe film and thin film evaporators. If you are looking to sell your used wipe film or thin film evaporator submit a request online or contact Erik Eichert at 630-238-7480.
Stock No.:
10128124Used Luwa LN-0012 B Vertical Thin Film Evaporator Package | 1.4 Sq. Ft. Wiped Film Evaporator
Used Luwa LN-0012 B Vertical Thin Film Evaporator Package | 1.4 Sq. Ft. Wiped Film Evaporator. The internal rating is for ATM to full vacuum. The jacket is rated at 245 psig @ 350C. The total volume of the evaporator is .166 cuft. It is equipped with 1.5 hp motor. All components are mounted on a painted carbon steel frame. Requires 230/460 vac 3 phase electrical supply. Serial number 0012/83.
MFR: Luwa
Stock No.:
14191148Used Pfaudler 140 Sq. Ft. 316L Stainless Steel Wiped Film Evaporator – Thin Film Evaporator for Sale
Used- Pfaudler 140 Sq ft 316L Stainless Steel Wiped Film Evaporator. Internal MAWP 15PSI/FV@650F. Spiral Jacket MAWP 110PSI/FV@650F. 279" overall length x 48" diameter. Top entering agitation with Chevron vanes and centrifugal carbon rotors driven by 15HP motor. 2" feed flange. 30" diameter welded vapor outlet. (4) Lug mounted. 16330lbs. Serial #J052579. CRN 8444.8. National Board #50995. Built 2003.
MFR: Pfaudler
Stock No.:
69401Luwa 21.6 Sq. Ft. 316L Stainless Steel Thin Film Evaporator
Used Luwa Model NL3-300/2200/HT vertical thin-film evaporator with 21.6 square feet of heat-transfer surface and 316L stainless steel construction. The evaporator measures 12" in diameter x 96" long in two sections and features a three-star Type L rotor, radial separator, mechanical seal, conical bottom with 2" diameter discharge, and 12" diameter vapor outlet. The internal chamber is rated for full vacuum at 365 F, and the jacket is rated for approximately 150 psi at 365 F. Driven by a 7.5 horsepower belt-drive motor rated for 230/460 volts, 3 phase, 60 hertz, and 1,720 revolutions per minute. Support ring is missing. Possible applications include evaporation, concentration, solvent recovery, stripping, and separation of suitable heat-sensitive, viscous, chemical, food, pharmaceutical, and specialty process products.
MFR: Luwa
Stock No.:
14191147Used Pfaudler 231 Sq. Ft. 316L Stainless Steel Wiped Film Evaporator – Thin Film Evaporator
Used Pfaudler 231 Sq. Ft. 316L Stainless Steel Wiped Film Evaporator Thin Film Evaporator. Internal MAWP 15PSI/FV@650F. Spiral Jacket MAWP 110PSI/FV@650F. 361" OAL x 60" diameter OAD. Top entering agitation with Chevron vanes and centrifugal carbon rotors driven by 25HP motor. 2" feed flange. 40" diameter welded vapor outlet. (4) Lug mounted. 16330 lbs. Serial #J052580. CRN 8445.8. National Board #50990. Built 2003.
MFR: Pfaudler
Stock No.:
47790Used Buss-SMS B400 Evaporator – 316 Stainless Steel, 13' Long, Jacketed for 45 PSI & Vacuum
Used- Buss-SMS Evaporator, Type B400. 13' Long on straight side x 1'6" diameter. 316 Stainless steel construction. Jacketed and rated for 45 psi (3 bar) and vacuum. (1) 1" diameter product, (1) conical 3.5" diameter bottom product outlet. Belt driven but without motor. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Buss-SMS
Stock No.:
41174082Used BRODR. HETLAND HIFS 6 Pilot Falling Film Vacuum Evaporator – 316L Stainless Steel Protein Processing System
Used- BRODR. HETLAND A/S, 1-Effect Pilot Falling-Film Vacuum Evaporator Unit, Type HIFS 6. 316L Stainless steel.64.58 Sq. ft ( 6 m2) heating surface. 220 lbs/HR (100KG/HR) Water evaporation % DS til 35 % DS. 7. 20 pipes 1.3" (33.7 mm) dia x 9'8" (3000 mm) long pipes. Serial# 8401-B4. Complete with piping, pumps, sensors and additional infrastructure. Previously used in a protein application. Our Freight specialists can assist with any customs documentation to insure a smooth transition.
Stock No.:
41174053Used EPCON MVR Falling Film Vacuum Evaporator – 4,200 kg/h | AISI 316 | 1-Pass | Whey Concentration | Upgradeable
Used- 1-pass MVR falling film vacuum evaporator. This EPCON evaporator was designed to concentrate whey products from 5% to an impressive 20% total solids in just one pass. This falling film evaporator plant operates seamlessly with a Mechanical Vapour Recompression (MVR) unit, which utilizes electricity to recompress evaporated water, transforming it into reusable steam. The water evaporation capacity ranges between 4,000 and 4,200 kg/hour, dependent on product parameters and boiling temperature. Equipped with 745 pipes measuring ?38 x 6 meters, in addition to the MVR characteristic and boiling temperature considerations, this EPCON evaporator boasts an impressive water evaporation capacity of approximately 4,200 kg/hour. For your convenience, the complete EPCON unit will be delivered with its original technical documentation. The installation footprint measures around 8 x 8 meters, standing at approximately 8 meters in height. This versatile EPCON evaporator has the potential for a redesign/rebuild into a 2-pass evaporator, amplifying water evaporation capacity by approximately 25%. Our expert evaporator designer is ready to provide tailored calculations and drawings to optimize this unit for your specific application. Materials in contact with product are made of acidproof stainless steel, AISI316. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible