Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.


Recently added products

Clear
https://www.aaronequipment.com/Images/ItemImages/Mixers/Planetary-Mixer/Myers-V550A-20-40_11059413_aa.jpg

Stock No.:

11059413

Used MYERS V550A-20-40 375 Gallon Dual Shaft Vacuum Mixer with High Speed Disperser

Used- 375 Gallon MYERS Model V550A-20-40 Dual Shaft Vacuum Mixer with High Speed Disperser and Sweep Agitation. 20 HP and 40 HP (XP) Explosion Proof motors. 316 stainless steel jacketed mix tank, approximately 440 gallon volume with 375 gallon working capacity. 3" outlet. Explosion Proof control panels included. Units were installed and test run for a short time only.

MFR: Myers

https://www.aaronequipment.com/Images/ItemImages/Mixers/Planetary-Mixer/Ross-Industries-CDA-300_11059411_aa.jpg

Stock No.:

11059411

ROSS 300 Gallon Jacketed Vacuum Mixer with Sweep Agitator and Explosion-Proof Motors

ROSS 300 Gallon Jacketed Vacuum Mixer with Sweep Agitator and Explosion-Proof Motors. 300 Gallon capacity. Unit equipped with Portable Jacketed Tank rated 2 PSI / Full Vacuum at 300 degrees F. Jackets rated 50 PSI at 300 degrees F. Approximate 11'1" overall height. Explosion Proof Motors (XP), (1) 20 HP, 1775 RPM, 208-230/460 volt. (1) 30 HP, 1775 RPM, 208-230/460 volt.

MFR: Ross Industries

https://www.aaronequipment.com/Images/ItemImages/Mixers/Planetary-Mixer/Ross-Industries-CDA-300_11059410_aa.jpg

Stock No.:

11059410

Used ROSS CDA-300 300 Gallon Dual Shaft Vacuum Mixer with High Shear Disperser and Sweep Agitator

Used ROSS CDA-300 300 Gallon Dual Shaft Vacuum Mixer with High Shear Disperser and Sweep Agitator. 300 Gallon capacity. Unit equipped with Portable Jacketed Tank rated 2 PSI / Full Vacuum at 300 degrees F. Jackets rated 50 PSI at 300 degrees F. Approximate 11'1" overall height. Explosion Proof Motors (XP), (1) 20 HP, 1775 RPM, 208-230/460 volt. (1) 30 HP, 1775 RPM, 208-230/460 volt.

MFR: Ross Industries

https://www.aaronequipment.com/Images/ItemImages/Mixers/Planetary-Mixer/Ross-Industries-CDA-300_11059412_aa.jpg

Stock No.:

11059412

ROSS CDA-300 300 Gallon Dual Shaft Vacuum Mixer with High Shear Disperser

ROSS CDA-300 300 Gallon Dual Shaft Vacuum Mixer with High Shear Disperser and Sweep Agitator. 300 Gallon capacity. Unit equipped with Portable Jacketed Tank rated 2 PSI / Full Vacuum at 300 degrees F. Jackets rated 50 PSI at 300 degrees F. Approximate 11'1" overall height. Explosion Proof Motors (XP), (1) 20 HP, 1775 RPM, 208-230/460 volt. (1) 30 HP, 1775 RPM, 208-230/460 volt.

MFR: Ross Industries

https://www.aaronequipment.com/Images/ItemImages/Complete-Plants/Plant-Lines/54730001_aa.jpeg

Stock No.:

54730001

Used Goodnature SX200 Fruit Press and In-Feed Line with C.S. Bell Hammer Mill

Used- Fruit Press and In-Feed Line. Consists of a Goodnature SX200 press, a CS Bell 20SSHM30 hammer mill, and an Oesco hopper and lift conveyor. The C.S. Bell hammer mill reduces incoming fruit into mash for pressing, while the OESCO hopper and lift conveyor provide material handling and feeding capabilities. The Goodnature SX200 features a dual-chamber hydraulic pressing system with accordion-style filter bags and pressing racks, allowing one chamber to be loaded or discharged while the other is pressing. Rated for hourly throughput of up to 1.25 tons, with hourly output at 150 - 200 gallons. Hydraulic-assisted chamber dumping facilitates removal of spent fruit pulp. Suitable applications include commercial apple cider production, fruit juice extraction, beverage manufacturing, and agricultural fruit processing.

https://www.aaronequipment.com/Images/ItemImages/Plastics-Equipment/Extruders-Twin-Screw-CoRotate/Coperion-ZSK-58-MC_54726001_aa.jpg

Stock No.:

54726001

Used Coperion Werner & Pfleiderer ZSK 58 Twin Screw Extrusion Line

Used- Coperion Werner & Pfleiderer ZSK 58 MC Extrusion Line consisting of: (1) Brabender Feeding/Dosing System incl 2 x pre-dosing units, 2 x gravimetric dosing units & 1 x volumetric dosing unit, (1) Coperion Werner & Pfleiderer ZSK 58 BC Twin Screw Extruder, 46:1 L/D ration. (2) 58 mm diameter screws, co-rotating inter-meshing side by side screw design, (10) heated barrels, electrically heated water cooled. Max screw speed 1200 RPM by a drive motor via a gearbox, (1) Die head. Frame mounted, (1) Coperion ZS-B 58 twin screw side feeder. (1) Complete strand granulation system, (1) Cooling unit, (1) Control panel with a Siemens S7-300 controller. Complete with pumps, sensors and additional infrastructure. Incl. 1 x pair of spare screw shafts including screw set and misc. spares. Previously used in a Masterbatch application.

MFR: Coperion

https://www.aaronequipment.com/Images/ItemImages/Packaging-Equipment/Fillers-Powder-Auger-Semi-Automatic-Filler/Mateer-1100MLX_73748001_aa.jpg

Stock No.:

73748001

Used Mateer Pneumatic Scale 1100MLX Semi-Automatic Auger Filling Machine

Used- Mateer Pneumatic Scale Model 1100MLX semi-automatic auger filling machine equipped with an Allen-Bradley PanelView Plus 600 operator interface. Powered by a 1.5 HP Baldor motor rated at 1740 RPM, 460V, 3-phase, 60 Hz. Designed for semi-automatic auger filling applications.

MFR: Mateer

https://www.aaronequipment.com/Images/ItemImages/Plastics-Equipment/Injection-Molders-Horizontal/Boy-55A_54725002_aa.jpg

Stock No.:

54725002

Used 2007 BOY 55A 55-Metric-Ton Hydraulic Injection Molding Machine

Used- 2007 BOY Model 55A 55-Metric-Ton Hydraulic Plastic Injection Molding Machine. Manufactured by Dr. Boy GmbH & Co. KG, Germany, Serial # 59383. Previously operated in an ISO 13485-certified medical device manufacturing facility. Compact, four-tie-bar hydraulic injection molding machine featuring 550 kN (approximately 55 metric tons or 60.6 US tons) clamping force, 360 x 335 mm (14.17" x 13.19") tie-bar spacing, and 565 x 540 mm (22.24" x 21.26") platens. Manufacturer specifications indicate a maximum opening stroke of 400 mm (15.75"), minimum mold height of 250 mm (9.84"), and maximum daylight opening of 650 mm (25.59"). Standard ejector stroke is 80 mm (3.15"), with 20.4 kN push and 13.5 kN pull force. Equipped with enclosed molding area, safety guarding, operator control panel with display and keypad, top-mounted stainless steel material hopper, hydraulic drive system, and integrated electrical cabinet. Nameplate electrical requirements are 230V, 60 Hz, three-phase, 61.9 amps, with maximum hydraulic pressure of 180 bar (approximately 2,611 pounds per square inch). Serial # 59383. Built 2007. Manufacturer's injection unit options include 28, 32, 38, and 42 mm screws, with theoretical shot capacities ranging from 73.9 to 166.3 cm and maximum polystyrene shot weights of 67 to 150 grams (2.36 to 5.29 oz), depending on installed screw configuration. Suitable for precision thermoplastic injection molding, prototype development, medical device components, and small- to medium-volume plastics production.

MFR: Boy

https://www.aaronequipment.com/Images/ItemImages/Plastics-Equipment/Extruders-Twin-Screw-Counter-Rotate/Leistritz-Corporation-LSM-3034_54725001_aa.jpg

Stock No.:

54725001

Used Leistritz LSM 30.34 34mm Twin Screw Extruder with Watlow Controls

Used- Leistritz Model LSM 30.34 34mm Twin Screw Extruder With Watlow Temperature Controls And Spare Parts. Previously operated in an ISO 13485-certified medical device manufacturing facility. This twin screw extrusion system is configured for pellet extrusion and features a 16 kW (approximately 21.5 HP) drive rated at 380V, 60 Hz, with a maximum screw speed of 300 RPM. The barrel heating system is rated at 7 kW, 240V, and features multiple independently controlled heating zones with Watlow temperature controllers. Equipped with a Leistritz gearbox, feed hopper, barrel assembly, electrical control cabinet, and operator control panel. Serial # 330.1754.01, Built 1989. Electrical components were updated in 2020, and the gearbox seal was replaced in 2022. The machine has reportedly accumulated limited production hours since refurbishment. Siemens hour meter displays approximately 9,166 hours. Includes approximately one pallet of spare parts. Previously used in medical device manufacturing, with potential applications in polymer compounding, pellet production, specialty plastics processing, and research and development.

MFR: Leistritz Corporation

https://www.aaronequipment.com/Images/ItemImages/Tanks/Carbon-Steel/42-000-Gallon_54724013_aa.jpg

Stock No.:

54724013

Used 1,000 BBL Vertical Tank for Oilfield Fluid Storage

Used 2018 Long Industries carbon steel storage tank previously installed in an oilfield facility, with 1,000-barrel nominal capacity and associated exterior piping and valves.. Tank measures approximately 15'6" diameter x 30'0 tall, with a nominal storage capacity of 1,000 barrels (approximately 42,000 gallons). Constructed of carbon steel with 3/16" shell thickness, 1/4" bottom thickness, and 1/4" deck thickness. Features Type F bottom, 8 oz design pressure, exterior access connections, and associated piping and valves as pictured. Estimated tank weight is 17,00020,000 pounds. Previously installed in an oilfield storage facility and marked out of service August 6, 2021. Possible applications include crude oil storage, produced water storage, oilfield fluid handling, and compatible industrial liquid storage

https://www.aaronequipment.com/Images/ItemImages/Tanks/Carbon-Steel/42-000-Gallon_54724012_aa.jpg

Stock No.:

54724012

Used Long Industries 1,000 Barrel Tank with Type F Bottom

This used 2018 Long Industries vertical storage tank features a Type F bottom, carbon steel construction and nominal capacity of 1,000 barrels.. Tank measures approximately 15'6" diameter x 30'0 tall, with a nominal storage capacity of 1,000 barrels (approximately 42,000 gallons). Constructed of carbon steel with 3/16" shell thickness, 1/4" bottom thickness, and 1/4" deck thickness. Features Type F bottom, 8 oz design pressure, exterior access connections, and associated piping and valves as pictured. Estimated tank weight is 17,00020,000 pounds. Previously installed in an oilfield storage facility and marked out of service August 6, 2021. Possible applications include crude oil storage, produced water storage, oilfield fluid handling, and compatible industrial liquid storage

https://www.aaronequipment.com/Images/ItemImages/Tanks/Carbon-Steel/42-000-Gallon_54724009_aa.jpg

Stock No.:

54724009

Used 42,000 Gallon Industrial Liquid Storage Tank

Used 2018 Long Industries vertical carbon steel tank with approximately 42,000 gallons of nominal capacity for compatible industrial liquid storage applications.. Tank measures approximately 15'6" diameter x 30'0 tall, with a nominal storage capacity of 1,000 barrels (approximately 42,000 gallons). Constructed of carbon steel with 3/16" shell thickness, 1/4" bottom thickness, and 1/4" deck thickness. Features Type F bottom, 8 oz design pressure, exterior access connections, and associated piping and valves as pictured. Estimated tank weight is 17,00020,000 pounds. Previously installed in an oilfield storage facility and marked out of service August 6, 2021. Possible applications include crude oil storage, produced water storage, oilfield fluid handling, and compatible industrial liquid storage

Recently reduced items

https://www.aaronequipment.com/Images/ItemImages/Dryers-Drying-Equipment/Rotary-Vacuum-Dryers/RVPD_53904005_aa.jpg

Stock No.:

53904005

Unused 5,000 Liter Hastelloy C22 Clad Rotary Vacuum Paddle Dryer System – 2024

Unused 2024 Sachin Industries 5,000 Liter 316 Stainless Steel / Hastelloy C-22 Clad Horizontal Reactor System With Heated Agitator, Condenser, And Receiver. Heavy-duty horizontal process reactor featuring 316 stainless steel construction with Hastelloy C-22 (HC22) cladding and a motor-driven internal shaft and drum assembly. Equipped with an externally mounted electric motor, belt drive, gear reducer, and specially designed rotary pressure joint for heating the hollow agitator drum and paddles. Includes actuated anti-cavity V-notch discharge valve with HC22 product-contact components, actuated V-notch charging valve with HC22 contact components, and a top-mounted charging hopper fabricated from 3 mm thick HC22. Features a multi-bag dust collector with HC22-supported filter cages, five HC22 filter cartridges, vacuum connection for moisture and solvent vapor extraction, and jacketed dust collector housing to minimize condensation during drying operations. Includes two sets of sight glasses and light glasses for visual process monitoring. Supplied with a 10 square meter vertical glass-lined shell-in-shell condenser with mild steel construction, insulation, and external cladding, along with a 1,000-liter vertical glass-lined receiver equipped with level indicators, provisions for pressure and vacuum transmitters, bottom discharge valves, insulation, and cladding. Internal and external stainless steel surfaces specified as acid cleaned, with external unmachined mild steel surfaces finished with two coats of red oxide primer. Manufacturer engineering drawings available. Originally specified with installation qualification (IQ), operational qualification (OQ), and performance qualification (PQ) services at the client's site. Suitable for potential applications involving chemical processing, solvent recovery, vacuum drying, and specialty chemical production.

https://www.aaronequipment.com/Images/ItemImages/Filters/Nutsche-Filter/ANFD_53904004_aa.jpg

Stock No.:

53904004

Unused 2024 3,000 Liter Hastelloy C22 Agitated Nutsche Filter Dryer

Unused 2024 Sachin Industries 3,000 Liter 316 Stainless Steel / Hastelloy C-22 Clad Agitated Nutsche Filter Dryer (ANFD), GMP Design. Vertical batch-type agitated Nutsche filter dryer featuring 3,000-liter capacity, 316 stainless steel construction with Hastelloy C-22 (HC22) cladding, detachable bottom assembly, and provisions for HC22 filter mesh media or polypropylene (PP) filter cloth. Designed for integrated solid-liquid separation, cake washing, agitation, and vacuum drying within a single enclosed vessel. Equipped with a top-mounted motorized agitator assembly, hydraulic plug-type discharge valve, multiple process connections, and stainless steel support structure. Includes single-bag 316 stainless steel dust collector for capturing fines during the drying cycle and a 120 cubic meter per hour water ring vacuum pump with HC22 product-contact components, 7.5 HP motor, 1,440 RPM, 4-pole, 60 Hz, specified for US NEC Class I, Division 2 applications. Also includes a mother liquor priming pump with HC22 contact components, 5 HP motor, 1,440 RPM, 4-pole, 60 Hz, and Class I, Division 2 specifications. Additional components include miscellaneous HC22 and 316 stainless steel piping, valves, fittings, and instrumentation. Manufacturer engineering drawings available. Suitable for potential applications involving pharmaceutical intermediates, active pharmaceutical ingredients (APIs), specialty chemicals, fine chemicals, solvent-containing solids, and other processes requiring contained filtration, washing, and vacuum drying.

https://www.aaronequipment.com/Images/ItemImages/Confectionary-Equipment/Chocolate-Confectionary-Flakers-Chocolate/Sandvik_54687029_aa.jpg

Stock No.:

54687029

Used Sandvik 'Type' stainless steel belt flaker. (There is no Manufacturers tag for model or serial number.) The belt is 47.5" wide and has a flat area length of 40'. The infeed feed height is 58"....

Used-Sandvik 'Type' stainless steel belt flaker. (There is no Manufacturers tag for model or serial number.) The belt is 47.5" wide and has a flat area length of 40'. The infeed feed height is 58". The belt has 40" diameter end turn wheels. The belt is driven by 1 hp 90 vdc motor through a gear drive and chain. The unit has a variable speed control. The belt is fed by a 2" jacket pipe with 13 spray nozzles. The unit is also equipped with a chipper with a 32" discharge height. The overall dimensions are 48' long x 70" wide x 58" high. Unit requires 230 vac 1 hp electrical supply. Unit was running when shut down and is in good condition. ** Belt has a slight gash that may be repairable. See photos***

MFR: Sandvik

https://www.aaronequipment.com/Images/ItemImages/Heat-Exchangers/Shell-and-Tube-Stainless/Mid-South-Maintenance_54683003_aa.jpg

Stock No.:

54683003

Reportedly Unused Mid-South Maintenance 745.7 Sq Ft 304 Stainless Steel Shell and Tube Heat Exchanger, 2016

Reportedly Unused Mid-South Maintenance horizontal shell-and-tube heat exchanger, 745.7 sqft, 304 stainless steel construction. Shell measures 20-inch OD 183-3/4 inches long, with 3/8-inch wall thickness. Includes (248) straight 304 stainless steel tubes, 3/4-inch OD 0.065-inch wall, with welded 304 stainless steel tube sheets. Shell-side MAWP 300 PSI at 500F; tube-side MAWP 100 PSI at 500F. Includes flanged stainless steel end chambers with elliptical heads, (2) 6-inch Class 150 inlet/outlet connections, (3) 2-inch Class 300 connections, and two welded saddle supports. Built to ASME Section VIII, Division 1. Serial number 316-0007, National Board number 2157. Manufactured 2016. s/n 316-0007

MFR: Mid South Maintenance

Explore our guides.

Enhance your equipment knowledge with our resources.

Read Guide to Equipment Photography for Faster Sales

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Read Everything You Should Know Before Buying Used Cannabis Equipment

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Read Everything You Should Know Before Buying A Used Stainless Steel Tank

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.