Used Cannabis Drying Equipment for Sale
Cannabis drying equipment is designed to remove moisture from harvested plant material while preserving potency, terpene profile, and overall product quality. These systems provide controlled environments for drying and curing cannabis, helping prevent mold, degradation, and inconsistent results. Used cannabis drying equipment is widely utilized in commercial cultivation and processing facilities where precise temperature, humidity, and airflow control are critical. Aaron Equipment offers used cannabis drying equipment for sale in a range of configurations, capacities, and drying methods to support post-harvest operations.
Stock No.:
52675001Used Industrial Hemp Dryer for Sale – IEC Thermo 3000S, 3000 lbs/hr, Gas-Fired
Used- IEC Thermo High-Efficiency Multi-Phase Hemp Dryer, Model 3000S. 3000 pounds/hour Wet Hemp Feed-In Capacity at 70% Moisture Level. 88 Gallons/Hour LP and 8,000 Cubic Feet/Hour Natural Gas. Metered Feed-in Conveyor/Hopper, Feed-out Auger, and Connecting Conveyors. Continuous Feed, 2-3-Minute Drying Time, Protection of your Cultivars with Low Temperature Operations, Biomass Reaching no more than 130-140 Degrees F.
MFR: IEC
Stock No.:
52858001Continuous Belt-Style Dryer – Propane/Natural Gas, Low-Temp, 40ft Long, 2020
Used- Large Capacity Commercial Food / Hemp/ Agricultural Belt Style Continuous Dryer; dryer body measures 8 feet wide by 8 feet tall by 40 feet long with additional loading conveyor belt 8 feet wide by 17 feet; UL approved electrical circuits, heater and heater controls; software is US written and supported; 480 three phase power; 24 hour run cycles; multipurpose quick change burners; Variable temperature burners to 50,000 BTUs; max dry at 180 degrees; Drying cycles with propane or can be changed to natural gas; has been modified to dry at substantially slower speeds to increase yield and limited diminishing effects of Turpines and other desirable nutrients from hemp or other plants.. Built new in 2020. Like new condition with only 40 hours of set up and run time. As of listing, expert set up and dial in time available, can assist in shipping. Make offer. The unit was last used for drying industrial hemp but is also suitable for a variety of agricultural, food, and industrial applications. Guoxin
Stock No.:
53147070Used Guoxin GX-12-4 Hemp Dryer – 69 Sq. M Drying Area, 27.75 kW Power
Used- Guoxin Hemp Dryer; Model GX-12-4; Drying Area 69 square meters; Spread thickness of material 50-200mm; Working temperature 0-120 degrees C; Drying Time 0.5-5 hours; 22 kW Induced Draft fan; 2.2 kW Exhaust fan; 3 kW Feeding Conveyor; 0.55 kW Discharge Conveyor; 27.75 kW total power; Dimensions: 23m x 5.5m x 2.8m.
Stock No.:
53455001Used Guoxin GX2-12-4 Hemp Drying Line – 1000 lb/hr Capacity, 72m² Area
Used- Guoxin Hemp Drying Line, Model GX2-12-4. 72 sq M (775 sq feet) drying area; 180-450kg (approximately 400-1000 lbs.) wet biomass input capacity; 40-100kg (approximately 90-220 lbs.) dried biomass output capacity; 50-200mm (2-8") spread thickness of material; 0-120 degrees C (32-248 degrees F) working temperature; 0.1-5 hour drying time; 4.7 x 1.5 x 3m heat exchange furnace; OAD: 24 L x 6.5 W x 2.8 H meters (79' x 21' x 9'). Line components include: Feeding conveyor; Drying room; Burner; Blower; Heat exchanger; Exhaust fan; Discharge conveyor. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
Stock No.:
53455002Industrial Hemp Biomass Drying System – Guoxin GX2-12-4, 24m Line, 0–120°C Range
Used- Guoxin Model GX2-12-4 Hemp Drying Line. 72 sq M (775 sq feet) drying area; 180-450kg (approximately 400-1000 lbs.) wet biomass input capacity; 40-100kg (approximately 90-220 lbs.) dried biomass output capacity; 50-200mm (2-8") spread thickness of material; 0-120 degrees C (32-248 degrees F) working temperature; 0.1-5 hour drying time; 4.7 x 1.5 x 3m heat exchange furnace; OAD: 24 L x 6.5 W x 2.8 H meters (79' x 21' x 9'). Line components include: Feeding conveyor; Drying room; Burner; Blower; Heat exchanger; Exhaust fan; Discharge conveyor. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
Stock No.:
53933001Unused DryGair DG-6 Dehumidifier – High-Efficiency Humidity Control for Greenhouses & Indoor Cultivation
Unused DryGair DG-6 Dehumidifier High-Efficiency Humidity Control for Greenhouses & Indoor Cultivation. Integrates with existing/additional climate control systems; Automated humidity control settings, reducing the work-hours required to optimize RH; Measured in liters of water extracted per kW; 360 degrees air dispersal for climate uniformity; Flexible placement options in the growing facility and easy plug & play installation. 6 g/h at 64 degrees F, 80% RH water condensation; ~7,000 CFM air flow; 50 degrees F to 80 degrees F operating temperature; 3-" deep; 7-7" wide; 6-9", 7-11" tall with air distribution module (exact height can be adjusted) tall; 6 kW electricity consumption. Brand New with a 1 year warranty.
Stock No.:
53933002Unused- DryGair Dehumidifier, Model DG-6. Designed for optimal cultivation conditions
Unused- DryGair Dehumidifier, Model DG-6. Designed for optimal cultivation conditions; Integrates with existing/additional climate control systems; Automated humidity control settings, reducing the work-hours required to optimize RH; Measured in liters of water extracted per kW; 360 degrees air dispersal for climate uniformity; Flexible placement options in the growing facility and easy plug & play installation. 6 g/h at 64 degrees F, 80% RH water condensation; ~7,000 CFM air flow; 50 degrees F to 80 degrees F operating temperature; 3-" deep; 7-7" wide; 6-9", 7-11" tall with air distribution module (exact height can be adjusted) tall; 6 kW electricity consumption.Brand New with a 1 year warranty.
Stock No.:
53933003Unused Model DG-6 Industrial Dehumidifier, Manufactured by DryGair.
Unused Model DG-6 Industrial Dehumidifier, Manufactured by DryGair. Designed for optimal cultivation conditions; Integrates with existing/additional climate control systems; Automated humidity control settings, reducing the work-hours required to optimize RH; Measured in liters of water extracted per kW; 360 degrees air dispersal for climate uniformity; Flexible placement options in the growing facility and easy plug & play installation. 6 g/h at 64 degrees F, 80% RH water condensation; ~7,000 CFM air flow; 50 degrees F to 80 degrees F operating temperature; 3-" deep; 7-7" wide; 6-9", 7-11" tall with air distribution module (exact height can be adjusted) tall; 6 kW electricity consumption.Brand New with a 1 year warranty.
Stock No.:
53933004Refurbished- DryGair DG-12 Dehumidifier – High-Capacity, Corrosion-Resistant RH Control for Greenhouses & Indoor Cultivation
Refurbished DryGair Dehumidifier, Model DG-12. Industrial-grade, plug-and-play commercial greenhouse dehumidifier designed specifically for horticultural environments to control humidity and maximize energy efficiency while integrating seamlessly into existing climate control systems. The unit provides up to 12 gallons per hour (48 L/hour) of moisture extraction at 64 degrees F and 80% RH, with approximately 13,000 CFM (~23,000 m/h) airflow and a patented 360 degree air distribution system that promotes uniform climate conditions and reduces microclimates across dense crop canopies. Coverage can reach up to 40,000 sq ft per unit depending on crop density. Operating performance is optimized between 50 degrees F and 80 degrees F (10 degrees C to 25 degrees C), with power consumption of approximately 10 kW for 60 Hz North American models (12 kW for 50 Hz EU variants). Electrical requirements include 3-phase 460V or 208V options in North America and 3-phase 400V in EU configurations, with appropriate disconnect sizing based on installation. The unit features flexible installation options (floor-mounted, aisle-centered, or suspended) and includes a SmartDG controller for automated and remote humidity management. Construction includes an anti-corrosion coating for durability in humid, chemically active environments and uses refrigerants such as R507, R513A, or R134A depending on region and manufacturing year. Physical dimensions are approximately 7' 7" W x 3' " D x 7' 10"9' 1" H (adjustable with air distribution module), weighing approximately 1,710#. A 1" BSP drainage connection is provided, and the system is offered with a 1-year warranty.t corrosion and resistance to harmful agents and particles.1 year warranty.
Stock No.:
53933005Refurbished DryGair Dehumidifier, Model DG-12. Designed for optimal cultivation conditions
Refurbished DryGair Dehumidifier, Model DG-12. Industrial-grade, plug-and-play commercial greenhouse dehumidifier designed specifically for horticultural environments to control humidity and maximize energy efficiency while integrating seamlessly into existing climate control systems. The unit provides up to 12 gallons per hour (48 L/hour) of moisture extraction at 64 degrees F and 80% RH, with approximately 13,000 CFM (~23,000 m/h) airflow and a patented 360 degree air distribution system that promotes uniform climate conditions and reduces microclimates across dense crop canopies. Coverage can reach up to 40,000 sq ft per unit depending on crop density. Operating performance is optimized between 50 degrees F and 80 degrees F (10 degrees C to 25 degrees C), with power consumption of approximately 10 kW for 60 Hz North American models (12 kW for 50 Hz EU variants). Electrical requirements include 3-phase 460V or 208V options in North America and 3-phase 400V in EU configurations, with appropriate disconnect sizing based on installation. The unit features flexible installation options (floor-mounted, aisle-centered, or suspended) and includes a SmartDG controller for automated and remote humidity management. Construction includes an anti-corrosion coating for durability in humid, chemically active environments and uses refrigerants such as R507, R513A, or R134A depending on region and manufacturing year. Physical dimensions are approximately 7' 7" W x 3' " D x 7' 10"9' 1" H (adjustable with air distribution module), weighing approximately 1,710#. A 1" BSP drainage connection is provided, and the system is offered with a 1-year warranty.
Stock No.:
53933006Refurbished Model DG-12 Industrial Dehumidifier, Manufactured by DryGair for Climate Control.
Refurbished DryGair Dehumidifier, Model DG-12. Industrial-grade, plug-and-play commercial greenhouse dehumidifier designed specifically for horticultural environments to control humidity and maximize energy efficiency while integrating seamlessly into existing climate control systems. The unit provides up to 12 gallons per hour (48 L/hour) of moisture extraction at 64 degrees F and 80% RH, with approximately 13,000 CFM (~23,000 m/h) airflow and a patented 360 degree air distribution system that promotes uniform climate conditions and reduces microclimates across dense crop canopies. Coverage can reach up to 40,000 sq ft per unit depending on crop density. Operating performance is optimized between 50 degrees F and 80 degrees F (10 degrees C to 25 degrees C), with power consumption of approximately 10 kW for 60 Hz North American models (12 kW for 50 Hz EU variants). Electrical requirements include 3-phase 460V or 208V options in North America and 3-phase 400V in EU configurations, with appropriate disconnect sizing based on installation. The unit features flexible installation options (floor-mounted, aisle-centered, or suspended) and includes a SmartDG controller for automated and remote humidity management. Construction includes an anti-corrosion coating for durability in humid, chemically active environments and uses refrigerants such as R507, R513A, or R134A depending on region and manufacturing year. Physical dimensions are approximately 7' 7" W x 3' " D x 7' 10"9' 1" H (adjustable with air distribution module), weighing approximately 1,710#. A 1" BSP drainage connection is provided, and the system is offered with a 1-year warranty.
Stock No.:
54217001Used iDry Standard Cannabis Curing Dryer | 360-Tray Capacity | Touch Screen Controls | 60–70°F | 3PH/480V | 20’L x 7’W x 7’H
Used- iDry Standard Cannabis Curing Dryer. 60-70 degress F operating temp. 70 degrees F ambient temp. Max. capacity of 360 trays. 30" L x 16" W x 2" deep perforated bottom trays. (15) tray dollies. 1.5" max. product height. Touch screen controls. 20' L x7' W x 7' H OAD. 3ph/480V.
Cannabis Drying Equipment Applications & Typical Use Cases
Used cannabis drying equipment is commonly used in post-harvest processing to ensure consistent moisture removal. Typical applications include:
Drying harvested cannabis flower
Pre-curing moisture reduction before storage
Controlled environment drying for terpene preservation
Bulk biomass drying for extraction processes
Industrial-scale cannabis processing operations
These systems help maintain product quality and improve downstream processing efficiency.
When to Choose Cannabis Drying Equipment
Cannabis drying equipment is best suited for operations requiring controlled, repeatable drying conditions. It is typically selected when consistency, product quality, and compliance with processing standards are essential. Compared to open-air drying methods, industrial drying systems offer better control over humidity and temperature, reducing the risk of contamination and product loss.
Used Cannabis Drying Equipment Buying Considerations
When evaluating used cannabis drying equipment, consider:
Drying capacity and throughput: Ensure the system matches harvest volume and processing timelines
Temperature and humidity control: Critical for preserving cannabinoids and terpene profiles
Airflow design: Uniform air distribution helps prevent uneven drying or mold formation
Drying method: Tray dryers, rack systems, or continuous dryers depending on operation scale
Sanitation and material construction: Important for compliance and product safety
Why Buy Used Cannabis Drying Equipment
Purchasing used cannabis drying equipment can significantly reduce capital costs while maintaining reliable drying performance. Many systems are available for immediate delivery, helping operations avoid long lead times associated with new equipment. Used equipment also allows facilities to scale drying capacity quickly and cost-effectively.
Sell Your Used Cannabis Drying Equipment
Aaron Equipment purchases surplus and used cannabis drying equipment across a range of configurations and capacities. Whether you are upgrading systems, expanding operations, or selling idle equipment, our team can assist with buyouts or consignment opportunities.
Cannabis drying equipment is designed to remove moisture from harvested cannabis under controlled conditions. It helps preserve product quality, potency, and consistency during post-harvest processing.
These systems are used for drying cannabis flower, preparing biomass for curing or extraction, and ensuring consistent moisture levels for storage and packaging.
Industrial drying equipment provides controlled temperature, humidity, and airflow, while traditional methods rely on ambient conditions. Controlled systems improve consistency, reduce contamination risk, and enhance product quality.
The cost depends on system size, drying method, capacity, manufacturer, and condition. Larger or more advanced environmental control systems typically command higher prices.
Yes. Aaron Equipment purchases used cannabis drying equipment across various configurations. If you have equipment available for sale, submit your details for evaluation.