Used Cannabis and Hemp Extraction Equipment for Sale
Cannabis and hemp extraction equipment is designed to isolate cannabinoids, terpenes, and other valuable compounds from plant biomass using mechanical, solvent-based, or thermal processes. Common extraction methods include ethanol extraction, CO₂ extraction, hydrocarbon extraction, and distillation. Used cannabis and hemp extraction equipment offers processors a cost-effective way to scale production while maintaining process efficiency and product consistency. Aaron Equipment carries a range of used extraction and processing systems suitable for CBD, THC, and industrial hemp applications.
Stock No.:
48996002Alfa Laval Fermenter / Reactor, Approximate 40 Liter (10.5 Gallon), 316L-Unused-
Unused- Alfa Laval Fermenter / Reactor, Approximate 40 Liter (10.5 Gallon), 316L Stainless Steel, Vertical. Approximate 12" diameter x 22" straight side, bolt-on flat top, dished bottom. Internal rated 45 PSI/FV at -20 to 400 degree F. 316L Stainless steel Jacket rated 150 psi/FV at -20 to 400 degree F. Bottom entering agitation 1/2hp drive, missing agitator. (1) Spray ball. Side lug mounted with load cells. National Board #264. Serial #786-100/17. Built 2004. Includes control panel with Wedgewood technology model 653 absorbance monitor, Mettler toledo Jag xtreme digital read out, (4) metering valves. All mounted on stainless steel frame.
MFR: Alfa Laval
Stock No.:
54578001Used Pure Extraction PE-5-200 5-Liter Closed-Loop Supercritical CO2 Extractor – Commercial CO2 Extraction System
Used Pure Extraction PE-5-200 5-Liter Closed-Loop Supercritical CO2 Extractor Commercial CO2 Extraction System. Processes approximately 1 pound of material per run, about 2 hours. Features a 5-liter extraction vessel, liquid CO2 tank with syphon tube, solid-state heating, stainless steel construction, and ultrasonic cleaner. Includes extra gaskets and filters. Designed for precise temperature and pressure control in commercial extraction applications. Can be run on single phase or three phase electrical.
Stock No.:
51083004ExtraktLAB Supercritical CO2 Extractor – 40L Total Capacity, CO2 Recycler, Cannabis
Used- ExtraktLAB CO2 Extraction System. Model Extrakt 140 | Cannabis Equipment. Supercritical CO2 extraction machine. 5000 PSI, (2x) 20L extraction cylinders, (3) 304 stainless steel collection columns. Electrical: 208V-240V, 3 phase, 67 FLA. Footprint: 24 foot. Includes CO2 Recycler System: 5000 PSI, 20L capacity cylinder, fully integrated into extraction machine with automated control from HMI panel. Does not include the chiller. Last used in a Cannabis application. Does not include chiller, originally had a Poly Science Durachil 5 hp chiller
Stock No.:
52533001Unused LPMIE SCFE-300L CO2 Extraction Unit – High-Pressure Supercritical Extraction
Unused -LPMIE CO2 Extraction Unit; Model SCFE-300L; Includes: extraction kettle, separate kettle, CO2 high pressure pump, entrainer pump, cooling system, CO2 basin, exergy transfer system, purification system, flowmeter, temperature control system, safety protection device; can be used for the extraction of the material at high pressure and suitable temperature (solid or fluid), modifying the separator conditions to analyze the dissolved substances to achieve the separation purpose.
Stock No.:
52636001Unused Supercritical CO2 Fluid Extraction Machine – 150L Dual Kettles
Unused Supercritical Co2 Fluid Extraction Machine; Maximum extraction pressure: 40MPa; Maximum separation pressure: 20Mpa; Extraction kettle volume: 150L x 2; Extraction temperature: normal temperature ~ 75 C; Maximum CO2 flow: 1000L / h adjustable; Includes the following: Refrigeration device; Temperature control display system; Pressure control display system; Safety protection device; Carrier tank; Purifier; Mixer; Heat exchange device; Storage tank; Plunger pump with a flow rate of 1000L/ h and 10L / h; Extraction tank; Separator; Electric control cabinet; Valve; Pipe fittings and cabinet rack. System is crated and ready for shipment.
Stock No.:
52636002Unused Supercritical CO2 Fluid Extraction Machine – Industrial Cannabis/THC Extractor
Unused- industrial Supercritical CO2 Extraction (SCFE) system designed to extract high-value compounds from natural raw materials such as plants, biomass, and oils using carbon dioxide in its supercritical state, ensuring a clean, solvent-free, and highly efficient process. The system is configured with one extractor and two separators, allowing operation in both batch and continuous modes, with the option to incorporate co-solvents when required. It is manufactured entirely in 304 stainless steel and equipped with a PLC-based automatic and manual control system, enabling precise monitoring and control of pressure, temperature, and flow throughout the process. The unit operates at pressures up to 5055 MPa and temperatures up to 8590C, and includes integrated safety features such as overpressure protection and safety valves, ensuring reliable and secure operation. In terms of capacity, this configuration corresponds to a large-scale industrial solution, featuring dual extraction vessels of approximately 150L each (150L 2), making it capable of processing significant volumes of raw material per batch or in continuous production. Additionally, the system incorporates electro-heating, CO2 recovery systems, high-pressure valves, and specialized sealing components, providing durability, operational efficiency, and consistency. This makes it an ideal solution for pharmaceutical, food, nutraceutical, and cosmetic applications, where high purity and process control are essential
Stock No.:
53402001Complete Extrakt Labs Extraction & Filling Equipment Package
Used- Complete Extraction/Vape Pen Filling Line consisting of: Extrakt Labs 110+ Co2 Extractor; Extrakt Labs DrainDroyd vacuum filtration system; Extrakt Labs recommended Bio Mass Grinder 10L Rotovap; 710 Shark Vape Pen Filling Machine, v7.0. All tools and accessories included. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
Stock No.:
53537001Unused SFT-150 Propane-Butane Extraction System for Sale
Unused- Supercritical Fluid Technologies Propane-Butane Extraction System, Model SFT-150. Stainless steel construction; 5L vessel; 3L separator capacity; removable top and bottom. Additional components: Rupture disc for overpressure protection; Haskell MS-21 pump; Metering valve; Full recycle. Protective Labconco lab hood included. Built 2017.
Stock No.:
53631001Automated Cannabis CO2 Extraction System – Pure Extraction, 5L Vessel
Used- Pure Extraction Super/Sub-Critical CO2 Automated Extraction System. Capable of processing approximately 1 kg (2.2 lbs.) of cannabis per average 2 hour cycle; 5L vessel; 3000psi max. pressure; 10-50 degrees C (50-122 degrees F) operating temperature. OAD 72" x 33" x 60". 220V. Includes 25 gallon glycol chiller; 30 PSI max. pressure; -8-0 degrees C (17.6-32 degrees F) operating temperature. OAD: 55" x 24" x 65". 220V. Built 2018. Reported to be low hours. Cannabis Equipment / Machinery. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
Stock No.:
53748001Used Gloe Corporation Mobile Extraction System – Automated Cryoethanol Processing
Used- Gloe Corporation Mobile Extraction System. Recovery rates of 2 gpm at only 160f and 25"hg (more heat + more vacuum = faster recovery) ability to recirculate to further concentrate crude. Can batch 100lbs of ground material or about 60lbs flower at a time. Easy production of oil; Easy scalability; No building required; Automated cryoethanol extraction system.120 gallon batch tank; 4 stage filtration/remediation system; 300gallon vacuum jacketed cold storage tank; 300 gallon hot water jacketed tincture tank; 4 - 70"by 10" 150 tube falling film evaporators (3,500+sqft of surface area!) automated and manifolded together; 300 gallon reclaim tank. Designed and built by experienced process food/beverage system builders; All stainless sanitary build out; Welded by certified welders and passivated after fabrication for safe consumption products. Utilities included: 1;000;000 BTU water heater system; 40t cooling tower; Becker27"hg vacuum pump; Sullair 185 scroll air compressor; mq 70kw whisper watt generator; Completer 20l rotary evaporator with vacuum pump and chiller.
Stock No.:
53962001MRX Supercritical CO2 Extraction System, Model XTR 20L – 2000 PSI, 20L Vessel, w/ Chiller (Used, 2017)
Used- MRX Supercritical CO2 Automated Extraction System, Model XTR 20L. 2000 PSI closed loop CO2 botanical extractor with a 20L extraction vessel. System allows for tracking of temperature, pressure, and flow rate to allow for maximum daily yields. Automated temperature/pressure correction software maintains target levels throughout the entire extraction process. Uses touch-screen control requiring minimal training. With MRX chiller. Built 2017. Previously used in a cannabis application.
Stock No.:
53830001Used Apeks Supercritical CO2 Extraction System - Model 1500-20L
Used- Apeks Supercritical CO2 Extraction System, Model 1500-20L. 20 liters extraction vessel capacity; 1,500 psi maximum pressure; Fully automated with a 12" LCD touch-screen interface; Closed-loop system with up to 95% CO2 recovery; Serial # 13161. Includes spare Haskel AGD-14 gas booster pump and an Ingersoll Rand SSR UP6-25-125 air compressor. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Apeks
Cannabis and Hemp Extraction Equipment Applications & Typical Use Cases
Used cannabis and hemp extraction equipment is deployed across licensed processing facilities to convert raw biomass into refined products. These systems support multiple stages of the extraction and refinement workflow.
Typical applications include:
Cannabinoid extraction using ethanol, CO₂, or hydrocarbons
Winterization and solvent recovery processes
Distillation and refinement of crude oil into purified concentrates
Terpene isolation and recovery
Production of tinctures, vape oils, edibles, and topicals
Common industries include cannabis processing, hemp-derived CBD production, nutraceuticals, and specialty botanical extraction.
When to Choose Cannabis and Hemp Extraction Equipment
Cannabis and hemp extraction equipment is selected when operations require controlled, repeatable extraction of active compounds from plant material. Facilities focused on high-throughput crude oil production often utilize ethanol systems, while precision-focused operations may choose CO₂ extraction for tunable parameters and solvent-free outputs.
Hydrocarbon systems are often preferred for terpene-rich concentrates, while downstream equipment like wiped film evaporators and short path distillation units are used for purification. Selection depends on product type, regulatory requirements, and desired throughput.
Used Cannabis and Hemp Extraction Equipment Buying Considerations
When evaluating used cannabis and hemp extraction equipment, focus on process compatibility and system condition:
Extraction method: Ethanol, CO₂, or hydrocarbon systems must align with your product goals
Throughput capacity: Biomass input rates and batch vs. continuous processing capabilities
Solvent recovery efficiency: Critical for operating cost and compliance
Material construction: Stainless steel and sanitary design for GMP environments
Compliance and safety features: Explosion-proof ratings, certifications, and control systems
Maintenance history: Review seals, pumps, and pressure-rated components
Why Buy Used Cannabis and Hemp Extraction Equipment
Purchasing used cannabis and hemp extraction equipment reduces upfront capital investment while providing access to proven processing systems. Many units are available for immediate delivery, helping operators avoid long lead times associated with new equipment. Used systems can also allow facilities to expand capacity or pilot new extraction methods without significant financial risk.
Sell Your Used Cannabis and Hemp Extraction Equipment
Aaron Equipment actively purchases surplus and used cannabis and hemp extraction equipment, including extraction systems, distillation units, and solvent recovery equipment. If you are upgrading your facility, exiting the market, or have idle assets, our team can assist with buyouts or consignment opportunities. Submit your equipment details for evaluation.
Cannabis and hemp extraction equipment includes systems used to separate cannabinoids, terpenes, and other compounds from plant biomass. These systems may use solvents like ethanol or hydrocarbons, or supercritical CO₂, followed by downstream purification processes such as distillation and solvent recovery.
This equipment is used to produce concentrates, oils, distillates, and infused products from cannabis or hemp. It supports processes such as crude extraction, winterization, terpene recovery, and cannabinoid refinement for use in edibles, tinctures, vape cartridges, and pharmaceuticals.
Cannabis extraction equipment is specifically designed for handling volatile solvents, pressure systems, and regulated compounds. Unlike general processing equipment, it often includes explosion-proof components, closed-loop systems, and precise temperature and pressure controls to ensure safety and product consistency.
Pricing varies based on extraction method, system size, manufacturer, and condition. Smaller batch systems may be more affordable, while large-scale, fully integrated extraction lines command higher prices. Contact Aaron Equipment for current availability and pricing based on your process requirements.
Yes. Aaron Equipment purchases used cannabis and hemp extraction equipment, including CO₂ systems, ethanol extractors, hydrocarbon units, and distillation systems. If you have equipment available, submit your details to request an evaluation.