Used Carbon Steel Tanks for Sale
Carbon steel tanks are industrial storage and processing vessels designed for handling liquids, chemicals, and bulk materials in a wide range of applications. Known for their strength, durability, and cost-effectiveness, carbon steel tanks are commonly used where corrosion resistance requirements are moderate and structural integrity is critical. Used carbon steel tanks are widely utilized in chemical processing, petroleum, water treatment, and general industrial storage. Aaron Equipment offers used carbon steel tanks for sale in a variety of sizes, orientations, and configurations to meet diverse process and storage needs.
Stock No.:
53608001HMI ASI, 10,566 Gallon (40m3) Horizontal Tank
Used- HMI ASI, 10,566 Gallon (40m3) Horizontal Tank, Carbon Steel. Approximate 82-5/8" diameter (2100mm) x 457" long (11,611mm). Heating coil volume .44m3. Body thickness 4mm, ends 6mm. Rockwool insulation, approximate 50mm thickness with sheathing. Approximate 5" side bottom outlet. Saddle mounted. Approximate 471" long x 87" wide x 104" tall.
Stock No.:
53267084Used Approx. 13,000 Gallon Pittsburgh Tank Corporation Carbon Steel Vertical Mix Tank
Used- Approx. 13,000 Gallon Pittsburgh Tank Corporation Carbon Steel Vertical Mix Tank. Flat top and bottom. 11-6" diameter X 17 high straight side. Has side bottom manway. Has (4) internal baffles. Has stainless steel (4) blade agitator, driven through Chemineer Drive. Insulated and covered with sheathing. Includes ladder with safety cage and top handrail.
MFR: Pittsburgh-Des Moines
Stock No.:
53901002Used ER Manufacturing 13,200 Gallon Vertical Carbon Steel Storage Tank with Cone Bottom
Used ER Manufacturing 13,200 Gallon Vertical Carbon Steel Storage Tank with Cone Bottom. 13,200 gallon/50 cubic meter capacity. 9'3" diameter x 36' overall height. 24" x 36" side manway. 8" center bottom outlet port. 6" internal feed line. Cone bottom. With removable caged ladder. On (4) leg frame.
MFR: ER
Stock No.:
54281005Used Steel Fab Compressed Air Receiver Tank – Approx. 300 Gallon, Carbon Steel
Used Steel Fab Compressed Air Receiver Tank, Approximately 300 Gallon, Carbon Steel, Vertical. Internal rated 137psi at -20 to 450 degrees F. Head thickness .153", shell thickness .187". National Board# 160753, Part# A10054, Built 1997.
Stock No.:
53267075Used Lundberg Carbon Steel Vertical Tank, Approx. 18,000 gallon capacity
Used- Lundberg Carbon Steel Vertical Tank, Approx. 18,000 gallon capacity. Slight cone top, flat bottom; 12 diameter X 22 high straight side; Multiple top fittings and side bottom outlets; 24" side bottom manway. Insulated and covered with sheathing. Includes ladder with safety cage. Built 2017. Previously stored 50% caustic.
Stock No.:
532670103000 Gallon Samuel Pressure Group Horizontal Carbon Steel Pressure Tank.
Unused- 3000 Gallon Samuel Pressure Group Horizontal Carbon Steel Pressure Tank. 66" diameter X 214" OAL. Internal rated 165 PSI @ -20 to 400 F. Code Stamped. Dished ends Top side has two lifting lugs, (2) 1/2" NPT, (1) 3" NPT, and (1) 6" flanged fitting. One end has 12" X 16" manway, opposite has center 2" NPT. (1) 6" side flanged opening. (1) 1" bottom end drain. Mounted on saddles. Weight 5500#. Built 2022.
Stock No.:
52804006Unused Tripoint 4,000-Gallon Carbon Steel Horizontal Tank – 175 PSI, Dished Heads
Unused - Tripoint 4,000-Gallon Carbon Steel Horizontal Tank, dished heads, tank on (2) saddles, end swing arm manway cover. Approximately 6' diameter x 20' straight side. Internal rated 175 psi at -20 to 175 degrees F. Tank never certified. 10,307 empty weight, built 2018.
Stock No.:
52804007Unused - Tripoint Horizontal Tank, approximately 4000 Gallons
Unused - Tripoint Horizontal Tank, approximately 4,000 gallon. Carbon steel, dished heads, tank on (2) saddles, end swing arm manway cover. Approximately 6' diameter x 20' straight side. Internal rated 175 psi at -20 to 175 degrees F. Tank never certifed. 10,307 empty weight, built 2018.
Stock No.:
52804008Unused - Horizontal Carbon Steel Tank, Made By Tripoint, Approximately 4000 Gallons
Unused - Horizontal Carbon Steel Tank, Made By Tripoint, Approximately 4000 Gallons, dished heads, tank on (2) saddles, end swing arm manway cover. Approximately 6' diameter x 20' straight side. Internal rated 175 psi at -20 to 175 degrees F. Tank never certified. 10,307 empty weight, built 2018.
Stock No.:
52804009Unused - 4000 Gallon, Carbon Steel Tripoint Tank, Horizontal
Unused - 4000 Gallon, Carbon Steel Tripoint Tank, Horizontal, dished heads, tank on (2) saddles, end swing arm manway cover. Approximately 6' diameter x 20' straight side. Internal rated 175 psi at -20 to 175 degrees F. Tank never certified. 10,307 empty weight, built 2018.
Stock No.:
54110003Used HPW Horizontal Carbon Steel Pressure Tank | 4,000 Gallon | 300 PSI | 2017
Used HPW Horizontal Carbon Steel Pressure Tank | 4,000 Gallon | 300 PSI | 2017. 144.25" straight side X 84" Diameter. SA-516 GR 70 material of construction. 300 psi MAWP; 15 degrees F MAEWP; 300 degrees F MAWT; -20 degrees F MDMT; .0625" C.A.; 390 PSI Hydro; 1 hour hold time; 24" side manway; (3) top flanges; (2) side flanges; (2) head outlets. 189.25" OAL x approx. 106.375" OAH. Saddle mounted with forklift slots. Built 2017.
Carbon Steel Tank Applications & Typical Use Cases
Used carbon steel tanks are commonly deployed in industrial environments requiring reliable storage or processing of non-corrosive or mildly corrosive materials. Typical applications include:
Storage of oils, fuels, and petroleum products
Chemical storage and batch processing
Water and wastewater treatment systems
Slurry and bulk liquid handling
Mixing and blending support (with agitation when applicable)
These tanks are frequently used in both above-ground and process-integrated applications.
When to Choose a Carbon Steel Tank
Carbon steel tanks are best suited for applications where strength and cost efficiency are priorities over corrosion resistance. They are often selected over stainless steel tanks when handling non-aggressive materials or when internal linings or coatings can provide necessary protection. Operations requiring large-capacity storage or structural durability in demanding industrial environments commonly rely on carbon steel tank designs.
Used Carbon Steel Tank Buying Considerations
When evaluating a used carbon steel tank, consider:
Tank capacity and dimensions: Ensure compatibility with available space and required storage volume
Internal condition and linings: Assess for corrosion, pitting, or protective coatings based on application
Orientation and design: Vertical vs. horizontal configuration depending on installation requirements
Pressure or atmospheric rating: Confirm suitability for storage vs. pressurized applications
Nozzles, fittings, and accessories: Verify inlet/outlet configuration, manways, and agitation or heating features
Why Buy Used Carbon Steel Tanks
Purchasing a used carbon steel tank can significantly reduce capital costs while providing reliable storage capacity for industrial operations. Many tanks are available for immediate shipment, helping facilities avoid long fabrication lead times. Used equipment also allows buyers to source large-capacity vessels at a lower investment compared to new builds.
Sell Your Used Carbon Steel Tanks
Aaron Equipment purchases surplus and used carbon steel tanks in a wide range of sizes and configurations. Whether you are decommissioning equipment, upgrading storage systems, or liquidating assets, our team can assist with buyouts or consignment solutions.
A carbon steel tank is a storage or process vessel made from carbon steel, designed to hold liquids, chemicals, or bulk materials. These tanks are widely used in industrial applications due to their strength, durability, and cost efficiency.
Carbon steel tanks are used for storing fuels, oils, water, chemicals, and other industrial liquids. They are also used in batch processing and mixing applications across industries such as chemical manufacturing, petroleum, and water treatment.
Carbon steel tanks are generally more cost-effective and offer high structural strength, while stainless steel tanks provide superior corrosion resistance. Carbon steel tanks are often used for less corrosive materials or when coatings and linings can provide added protection.
The cost of a used carbon steel tank depends on factors such as size, condition, pressure rating, configuration, and included features. Larger tanks or those with specialized linings or certifications typically command higher prices.
Yes. Aaron Equipment purchases used carbon steel tanks across a wide range of sizes and configurations. If you have tanks available for sale, submit your equipment details for evaluation by our team.