Machine Tools
Stock No.:
52572001Unused Cosen SV-1100 Semi-Automatic Traveliong-Table Vertical Band Saw
Unused- Cosen Semi-Automatic Traveliong-Table Vertical Band Saw. Model SV-1100, 43" x 43", New 2014, EQUIPPED WITH: Control Panel, Semi-Automatic Hydraulically Traversing Table, Hydraulic Blade Tension, Automatic Blade Breakage Detection, Roller Bearing Guides. CATALOG SPECIFICATIONS: Throat Depth 43" 1100 MM, Height Capacity, Maximum 43" 1100 MM, Table Dimensions, L x W 96.5" x 65", Table Dimensions, L x W 2450 MM x 1650 MM, Table Feed, Length 25.6" 650 MM, Table Load Capacity 17361 LBS 7875 KG, Workbed Height 58.3" 1482 MM, Blade Length 346" 8800 MM, Blade Width 1.6" 41 MM, Blade Thickness 0.05" 1.3 MM, Blade Speeds, Inf. Variable 1500 to 6000 FPM, Blade Speeds, Inf. Variable 450 to 1800 MPM, Blade Motor, Horsepower 20 HP 15 KW, Hydraulic Motor, Horsepower 1 HP .75 KW, Coolant Motor, Horsepower 1/4 HP .186 KW, Floor Space Required, L x W 146" x 124", Overall, Height 169", Weight Approximately 8800 LBS 4000 KGNEVER BEEN USED, S/n SV1030012.
Stock No.:
54518001Used Wheelabrator 4-Wheel Wire Mesh Belt Shot Blast Machine – Continuous Feed Surface Preparation System
Used Wheelabrator continuous-feed wire mesh belt shot blast machine for cleaning, descaling, deburring, surface preparation, and finishing of compatible metal components. Features a 27-inch wire mesh conveyor belt, 27-inch-wide 16-inch-high work opening, and approximately 24-inch-wide 14-inch-high single-pass cleaning envelope. System is equipped with four 13-inch blast wheels, each rated at 10 HP, and operates at an approximate line speed of 6 feet per minute. Pitless design helps simplify installation by avoiding the need for a below-grade foundation pit. Components travel continuously through the blast chamber for multi-angle abrasive coverage. Suitable for compatible fabricated parts, castings, stampings, forgings, weldments, and machined components. Buyer should verify the complete included scope, electrical requirements, media-recovery and dust-collection equipment, blast-wheel condition, liner wear, mesh-belt condition, safety systems, and performance using representative parts before purchase.
Stock No.:
54129005Used Lucas Horizontal Precision 41 Boring Mill | 4" Spindle | #6 Morse Taper | 60" X-Axis Travel | Rotary Table Included
Used Lucas Horizontal Precision 41 Boring Mill | 4" Spindle | #6 Morse Taper | 60" X-Axis Travel | Rotary Table Included. 24" spindle feed W-axis. 48" vertical Y-axis travel. 57" Z-axis saddle travel with the backrest installed, 77" saddle travel w/o backrest. 60" cross travel with 36" x 74" table. Approx. 48" vertical head travel (Y-axis). Approx. 36?48? spindle travel (W-axis/Z-axis). Approx. 48?60? table cross travel (X-axis). Saddle/depth travel varies between 48?58?. 34?48? W x 62?68" table size. Scales on X, Y, Z. Manual Shifting for feeds, speeds, and backgear. 15-1550 Spindle RPM, Approx. 15 HP spindle motor, 3/60/220VAC. Rotary table included.
Stock No.:
52127002Used Weldomat AG CH3-2437 Contact Welding Machine – Dual Units | 600 Contacts/Min | Tape & Wire Welding
Used- Weldomat Automatic Contact Welding Machine with (2) Welding Units; Model AG CH3-2437;Suitable for welding solid and bimetal contacts off tape reel onto stip; Up to 600 contacts per minute; 300 contacts per welding unit; Horizontal tape fee; (2) welding units in machine; Tape width 1.20-3.50mm; tape height 0.30-1.00mm; cross section 0.05-2.60 square mm; round wire 1.00-2.20mm; range of contact length 0.60-3.50mm
Stock No.:
52733001Used Herr-Voss Coil Line Arbor with Coil Car – 10,000 lb Capacity | 18–24" Coil ID | Control Box Included
Used- Herr-Voss Coil Line Arbor and Coil Car; 18-24" coil ID capability; 10,000 pound capacity, arbor moves back and forward to adjust for camber; Includes control box for Coil Car and Paper winder.
Stock No.:
53518001Used Trumpf Trulaser 3040 CO2 Laser – 4000W | 4000mm x 2000mm | LoadMaster Automation | Built 2016
Used- Trumpf CO2 Laser, Model Trulaser 3040 (L32). With Loadmaster automation. Rated at speeds of 100m/min; 4000mm x 2000mm laser working area; X= 4000 mm, Y= 2000 mm, Z = 115 mm; 4000 watt CO2 laser; Automatic longitudinal pallet change; Longitudinal conveyor; 17" color touch screen; Work space lighting; Position laser diode; Spray device; Pierce Line; Focus Line; Plasma Line; Cutting head; Lens line with condition check. Complete with dust collection and cooling unit. 3/60/480V. Built 2016.Unit is running under power. Can be seen in operation. Available immediately.
Stock No.:
53417001Used Famar Tandem 200 Automatic CNC Lathe – High-Speed Precision Turning
Used- Famar Automatic CNC Lathe, Model Tandem 200. 150mm (5.9") max diameter; 140mm (5.5"); Working strokes: X x Z, 313mm (approximate 12.5") x 250mm (approximate 10"); 827mm X-axis total stroke; 90m/minute high speed; 60m/minute Z-axis fastest speed; 313mm X-axis motor torque, 250mm Z-axis motor torque. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Famar
Stock No.:
53417002Used Famar Automatic CNC Lathe – Tandem 200 for Sale
Used- Famar Automatic CNC Lathe, Model Tandem 200. 150mm (5.9") max diameter; 140mm (5.5"); Working strokes: X x Z, 313mm (approximate 12.5") x 250mm (approximate 10"); 827mm X-axis total stroke; 90m/minute high speed; 60m/minute Z-axis fastest speed; 313mm X-axis motor torque, 250mm Z-axis motor torque. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Famar