Used Recipricating Gas High Pressure Compressors

Used Great Lakes Air GN2-1800C11-XP2 Nitrogen Generator System – 3,745 SCFH, 99.5% Purity with Air Dryer & Tanks

Used- Great Lakes Air Package Nitrogen Generator, Model GN2-1800C11-XP2, Serial #42118. Rated capacity of 3,745 SCFH. Produces Nitrogen at 99.5% purity. Inlet pressure of 110 PSIG. Minimum inlet piping size 2''. Unit includes (2) Penway Inc. air receiver tanks rated at 150 psi at 450 degrees F, National Board #34983, 34984. (2) Manchester Tank 400 gallon tanks rated 200 psi at 450 degrees F. Refrigerated Air Dryer, Model GRF-250A-436, Serial #41822, 3/60/460V. Refrigeration compressor 1.5 HP. R404a refrigerant type. Built 2013. Overall dimensions: 85'' wide x 125'' long x 117'' tall.

MFR: Great Lakes

Used Gemini 125 HPSS CNG Gas Compressor – 4 Stage, 300 CFM, 125 HP, Complete System with Cascade, Dryer, Dispensers

Used- Gemini Gas Compressor, Model 125 HPSS, 4 Stage 300 CFM. CNG (Compressed Natural Gas) compressor system includes a four-stage, water-cooled, reciprocating compressor designed for efficient gas compression up to high pressures. U.S. Motors 125 HP, 1760 RPM, 460 Volt motor (S/N X783119) and includes an MK-AJ 24" recapture tank (S/N 9605). It is equipped with an EI C36-0527 cooler (S/N 93483) and a three-cylinder ASME cascade system, each cylinder measuring 20" x 11'6", rated for 5,000 psig and 5,711 cu. ft., with serial numbers 43338, 43339, and 43340. The unit utilizes a Marcum 11 Valve Electro-Pneumatic PMV/SMV priority/sequence panel for flow control. Compression is handled by a Quincy F340-80 air compressor rated at 7.5 HP, 460 Volt, with a discharge aftercooler (S/N 6019514). Drying is managed by a Wilkerson DE3 Twin Tower Heatless Dryer housed in a NEMA 4 enclosure (S/N 4339311). Fuel dispensing is facilitated by two DVCO 2020D dispensers with Hansen nozzles, serial numbers 930034 and 930037.and includes an air-cooled aftercooler, inter-stage separators, and safety relief valves on all stages. The compressor is skid-mounted with an integrated control panel for monitoring and automation, and it is designed for continuous-duty operation. Suitable for vehicle fueling stations or industrial applications, the unit ensures reliable performance with built-in protection systems.

MFR: Gemini

Used Sauer WP6208 BasSeal Helium Compressor | 1000 m³/h | 53.8 Barg | 270 HP | 2023

Used Sauer WP6208 BasSeal Helium Compressor | 1000 m/h | 53.8 Barg | 270 HP | 2023. 6 cylinder, 2 stage, 1000 cubic meters per hour volumetric flow rate, max. working pressure 53.8 barg. Discharge relief valve set pressure 56.5 barg, water cooled. Complete with controls, fully automated with HMI screen and mounted on a steel skid. 270 HP, 460/3/60, 307 FLA. Serial number 113730, new in 2023. Previously used for testing a NASA system. Reported to have 47.9 run hours.

Used Siad Skid Mounted O2 / Oxygen Compressor, Type MS3/1602-B3H, Item# C40. Approximate 2,650 Nm3/h. 3-Stage compressor. Driven by a 450HP motor. Handled flow 75,000 Scfh. Suction pressure 0,4 psi g at 95 degrees F. Delivery conditions 175 psi g at 104 degrees F. Cooling inlet water temperature 85 degrees F, outlet water temperature 103 degrees F, required flow 103 GPM. Control Panel. Serial# K30514/10A, Built 2003.

Used- Siad Skid Mounted O2 / Oxygen Compressor, Type MS3/1602-B3H, Item# C40. Approximate 2,650 Nm3/h. 3-Stage compressor. Driven by a 450HP motor. Handled flow 75,000 Scfh. Suction pressure 0,4 psi g at 95 degrees F. Delivery conditions 175 psi g at 104 degrees F. Cooling inlet water temperature 85 degrees F, outlet water temperature 103 degrees F, required flow 103 GPM. Control Panel. Serial# K30514/10A, Built 2003.

MFR: SIAD

Used Hydro-Pac LX Carbon Dioxide Compressor, Model C02.2-60-1975LX-CO2. Single stage; 400 to 2176 psi suction pressure; 2176 psi max. discharge pressure; Capacity @ 600 psig, 55 degree F inlet: 127 scfm; Capacity @ 870 psig, 55 degree F inlet: 989 scfm; 15 gpm (minimum) cooling water requirements at 60-80 degrees F. 60 HP, 3/60/230/460V motor, 120V control. Built 2020.

Used- Hydro-Pac LX Carbon Dioxide Compressor, Model C02.2-60-1975LX-CO2. Single stage; 400 to 2176 psi suction pressure; 2176 psi max. discharge pressure; Capacity @ 600 psig, 55 degree F inlet: 127 scfm; Capacity @ 870 psig, 55 degree F inlet: 989 scfm; 15 gpm (minimum) cooling water requirements at 60-80 degrees F. 60 HP, 3/60/230/460V motor, 120V control. Built 2020.

Used Blackmer CO2 Gas Compressor Skid with Glycol Cooling System | CO2 Liquefaction Package

Used- Blackmer Gas Compressor Skid with Glycol Cooling System. Compresses CO2 into liquid form. Skid working capacity of 100 - 150 kg/hr (8.16 cubic meters/hr CO2). Skid contains (2) pumps. (1) Blackmer Model HD082C. 7.5 HP. MAWP 350 psia. 8.44 CFM at max rpm. Serial # 2438140, built 2025. (1) Blackmer Model HDL 322C. 15 HP. MAWP 1000 psia. 9 CFM at max rpm. Serial # 202200251, built 2022. System includes Cybernetik coiled pot condenser.

MFR: Blackmer

Unused Skidded CO2 Recycle Compressor – Ariel Frame, 85 HP, Stainless Steel, 865 PSI Rated

Unused- Skidded Co2 Recycle Compressor. Packaged by Toromont in 20062007 and stored by GE from 2007 to 2013, this unit was originally designed for recycle CO2 compression in a coal gasification project that was later canceled. It features an Ariel frame, model JGP 1 or 2, with a 3" stroke operating at 1800 RPM, driven by an 85 HP electric motor. The compressor includes a 4.75" cylinder, class JG, and is designed for a pressure of 865 psi. The systems piping, valves, fittings, and heat exchangers are primarily constructed from stainless steel and rated for 865 psi. It is currently configured as a single-cylinder compressor but is capable of being retrofitted for two-cylinder service.

Used Neuman & Esser 3V1-370/260/120 Reciprocating Gas Compressor – 3 Stage | 64 Nm³ Capacity | 140 kW | Built 1999

Used- Neuman & Esser Reciprocating Gas Compressor, Type 3V1-370/260/120, Model V. 3 stage; 1 crank; 64.0 Nm^3 capacity; 0 bar g suction pressure; 42 bar g final pressure; 980 RPM compressor speed; 100mm stroke; 140kW BHP. Serial# 990 685 , Built 1999.

MFR: Neuman & Esser

Unused Atlas Copco Nitrogen NGP10+ Generator System with Atlas Copco Model ZT 37 VSD Air Compressor & (2) Air Receivers. Includes (1) Atlas Copco Nitrogen NGP10+ Generator, rated at 10 scfm, Max allowable inlet pressure 14.5 Bar, Allowable inlet temp 0 - 60 degrees C, Supply Voltage 110-230V/50-60Hz, Serial# API205965, Built 2018, Overall dimensions approximately 30" x 33" x 79"T. 637 lbs. (1) Atlas Copco Rotary Screw Oil-Free Air Compressor, Model ZT 37 VSD FF, 37 kW (50hp) 460V Variable Speed Drive - Two Stage Oil Free Rotary Air Compressor with Integrated Refrigerant Dryer, Performance: 87 to 214 cfm @ 102 psig, Dried to a 35 Deg F Pressure Dewpoint, Air cooled, 8.6 bar, 460 V (3 ph), 60 Hz, Electrical approval: UL/cUL. (1) 620 Gal Vertical ASME Code Certified Air Receiver. (1) Nitrogen Receiver Tank.

MFR: Atlas Copco