Used Cannabis Equipment for Sale
Used cannabis equipment includes a wide range of industrial processing, extraction, drying, and packaging systems designed for cannabis and hemp operations. These systems support critical steps such as biomass preparation, extraction, distillation, and final product packaging. Aaron Equipment offers used cannabis equipment for sale across multiple process stages, helping producers scale operations while reducing capital investment. Browse available inventory below or explore specific equipment types to find solutions aligned with your production requirements.
Stock No.:
48996002Alfa Laval Fermenter / Reactor, Approximate 40 Liter (10.5 Gallon), 316L-Unused-
Unused- Alfa Laval Fermenter / Reactor, Approximate 40 Liter (10.5 Gallon), 316L Stainless Steel, Vertical. Approximate 12" diameter x 22" straight side, bolt-on flat top, dished bottom. Internal rated 45 PSI/FV at -20 to 400 degree F. 316L Stainless steel Jacket rated 150 psi/FV at -20 to 400 degree F. Bottom entering agitation 1/2hp drive, missing agitator. (1) Spray ball. Side lug mounted with load cells. National Board #264. Serial #786-100/17. Built 2004. Includes control panel with Wedgewood technology model 653 absorbance monitor, Mettler toledo Jag xtreme digital read out, (4) metering valves. All mounted on stainless steel frame.
MFR: Alfa Laval
Stock No.:
42530005Used Stokes BB2 Rotary Tablet Press – 27 Stations, High-Speed Tablet Production
Used- Stokes Rotary Tablet Press, Model BB2. 27 Stations. Keyed upper punch guides, 3/60/220/440, rated 725-1400 tablets per minute. Maximum 5/8" diameter, maximum 11/16" depth of fill, maximum pressure 2.5 tons.
MFR: Stokes
Stock No.:
48417002Used Sturtevant Sample Grinder – Model 2-10, 100-400 lbs/hr Capacity, Carbon Steel
Used- Sturtevant Sample Grinder, Model 2-10, Carbon Steel. Approximate capacity 100 to 400 pounds per hour, product size 20 to 100 mesh. (1) 10" diameter grinding disc, driven by a 3 hp, 3/60/208-230/460 volt, 1750 rpm motor. Hinged door with (1) 10" diameter stationary grinding disc. Approximate top inlet 6-1/4" x 2-1/4", bottom outlet 6-3/4" x 4-3/8". Mounted on a carbon steel frame. Serial #1170.
MFR: Sturtevant
Stock No.:
42948001Used Alloy Products 5-Gallon 316L Stainless Steel Pressure Tank – 135 PSI, Vertical
Used- Alloy Products Pressure Tank, Approximately 5 Gallon, 316L Stainless Steel, Vertical. 9' Diameter x 14" straight side. Dished top and bottom. Polished internal rated 135 psi at 20 to 135 degress F. Openings top (2) 7/8, (2) 3/8, 5 x 6 oval, no cover. Rubber skirt mounted.
MFR: Alloy Products
Stock No.:
50364002Used Precision Stainless 30L Reactor – 316L Stainless Steel, Bottom Agitator, Jacketed
Used- Precision Stainless Reactor, 30 Liter (7.92 Gallons), 316L Stainless Steel, Vertical. Approximate 10-3/4" diameter x 22-1/4" straight side, dished top and bottom. Internal rated 50 psi at -20 to 350 degrees F. 304L Stainless Steel jacket rated 75 psi at -20 to 350 degrees F. Bottom entering agitator, 3 tier (6) blade impellers, requires a 1 HP motor. Openings: top head, (1) 2", (4) 1-1/2" tri-clamp, side: (10) 1-5/8" threaded. 1-5/8" Side bottom outlet. (4) Sidewall baffles. Mounted on a stainless steel frame with casters. National board# 7837, Serial# 981172-15,
MFR: Precision Stainless
Stock No.:
51083004ExtraktLAB Supercritical CO2 Extractor – 40L Total Capacity, CO2 Recycler, Cannabis
Used- ExtraktLAB CO2 Extraction System. Model Extrakt 140 | Cannabis Equipment. Supercritical CO2 extraction machine. 5000 PSI, (2x) 20L extraction cylinders, (3) 304 stainless steel collection columns. Electrical: 208V-240V, 3 phase, 67 FLA. Footprint: 24 foot. Includes CO2 Recycler System: 5000 PSI, 20L capacity cylinder, fully integrated into extraction machine with automated control from HMI panel. Does not include the chiller. Last used in a Cannabis application. Does not include chiller, originally had a Poly Science Durachil 5 hp chiller
Stock No.:
51846003Used Heidolph Hei-VAP Rotary Evaporator, Model ML Adv/Pre
Used- Heidolph Hei-VAP Rotary Evaporator, Model ML Adv/Pre. Motor lift; 155 mm stroke; 30 mm/s lifting speed; 10 280 rpm rotation speed range; 3.5 LCD Display; 1,300 W heating capacity; 20 to 210 degrees C; +/- 1C heating bath setting accuracy; cut-off at 5 C over set temperature via separate PT 1000 overheat protection bath; 5L maximum size evaporating glass; 1,400 cm2 condensing surface; Provides rapid and consistent solvent removal with precise temperature control, ranging from ambient to 210C. Includes; Chiller, Pump, and Flasks. Serial# 090M1780196. Built in 2017.
Stock No.:
52151001Used Heidolph Hei-VAP Industrial 20L Rotary Evaporator – Complete System with Vacuum Pump and Chiller
Used-Heidolph Hei-VAP Industrial 20L Rotary Evaporator System complete with optional mobile base cart, Rotavac vacuum pump, Hei-Chill 5 recirculating chiller, tube set, and safety enclosure. Features a universal heating bath up to 180C, illuminated evaporation flask, integrated water refill system, spillover prevention, protected receiver cassette housing, bottom drain valve, transparent PMMA safety door with non-fogging safety glass, metal frame guard hood, and large touchscreen controls with programmable operating ramps. Designed for GMP-compatible environments with OEM IQ/OQ validation available and includes the original operating manual, extra seals and caps, and latest software installed. Suitable for solvent recovery, evaporation, concentration, and distillation of ethanol, hydrocarbon solvents, pharmaceutical and chemical process materials, flavors, fragrances, and essential oils.
Stock No.:
52533001Unused LPMIE SCFE-300L CO2 Extraction Unit – High-Pressure Supercritical Extraction
Unused -LPMIE CO2 Extraction Unit; Model SCFE-300L; Includes: extraction kettle, separate kettle, CO2 high pressure pump, entrainer pump, cooling system, CO2 basin, exergy transfer system, purification system, flowmeter, temperature control system, safety protection device; can be used for the extraction of the material at high pressure and suitable temperature (solid or fluid), modifying the separator conditions to analyze the dissolved substances to achieve the separation purpose.
Stock No.:
52636001Unused Supercritical CO2 Fluid Extraction Machine – 150L Dual Kettles
Unused Supercritical Co2 Fluid Extraction Machine; Maximum extraction pressure: 40MPa; Maximum separation pressure: 20Mpa; Extraction kettle volume: 150L x 2; Extraction temperature: normal temperature ~ 75 C; Maximum CO2 flow: 1000L / h adjustable; Includes the following: Refrigeration device; Temperature control display system; Pressure control display system; Safety protection device; Carrier tank; Purifier; Mixer; Heat exchange device; Storage tank; Plunger pump with a flow rate of 1000L/ h and 10L / h; Extraction tank; Separator; Electric control cabinet; Valve; Pipe fittings and cabinet rack. System is crated and ready for shipment.
Stock No.:
52636002Unused Supercritical CO2 Fluid Extraction Machine – Industrial Cannabis/THC Extractor
Unused- industrial Supercritical CO2 Extraction (SCFE) system designed to extract high-value compounds from natural raw materials such as plants, biomass, and oils using carbon dioxide in its supercritical state, ensuring a clean, solvent-free, and highly efficient process. The system is configured with one extractor and two separators, allowing operation in both batch and continuous modes, with the option to incorporate co-solvents when required. It is manufactured entirely in 304 stainless steel and equipped with a PLC-based automatic and manual control system, enabling precise monitoring and control of pressure, temperature, and flow throughout the process. The unit operates at pressures up to 5055 MPa and temperatures up to 8590C, and includes integrated safety features such as overpressure protection and safety valves, ensuring reliable and secure operation. In terms of capacity, this configuration corresponds to a large-scale industrial solution, featuring dual extraction vessels of approximately 150L each (150L 2), making it capable of processing significant volumes of raw material per batch or in continuous production. Additionally, the system incorporates electro-heating, CO2 recovery systems, high-pressure valves, and specialized sealing components, providing durability, operational efficiency, and consistency. This makes it an ideal solution for pharmaceutical, food, nutraceutical, and cosmetic applications, where high purity and process control are essential
Stock No.:
52675001Used Industrial Hemp Dryer for Sale – IEC Thermo 3000S, 3000 lbs/hr, Gas-Fired
Used- IEC Thermo High-Efficiency Multi-Phase Hemp Dryer, Model 3000S. 3000 pounds/hour Wet Hemp Feed-In Capacity at 70% Moisture Level. 88 Gallons/Hour LP and 8,000 Cubic Feet/Hour Natural Gas. Metered Feed-in Conveyor/Hopper, Feed-out Auger, and Connecting Conveyors. Continuous Feed, 2-3-Minute Drying Time, Protection of your Cultivars with Low Temperature Operations, Biomass Reaching no more than 130-140 Degrees F.
MFR: IEC
Types of Used Cannabis Equipment Available
Aaron Equipment offers a range of used cannabis equipment designed to support cultivation, processing, and product finishing applications:
Cannabis & Hemp Drying Equipment – Systems designed to remove moisture from harvested biomass while preserving cannabinoid and terpene profiles.
Cannabis & Hemp Extraction Equipment – Equipment used for solvent-based or mechanical extraction of cannabinoids and essential oils from plant material.
Cannabis & Hemp Packaging Equipment – Machinery for filling, sealing, labeling, and preparing finished cannabis products for distribution.
Cannabis & Hemp Trimmers – Automated or semi-automated systems used to trim harvested cannabis flower efficiently and consistently.
Cannabis & Hemp Distillation Equipment – Systems used to refine extracts and isolate cannabinoids through fractional distillation processes.
Cannabis Equipment Applications & Industry Uses
Used cannabis equipment supports a wide range of operations across the cannabis and hemp industry, from cultivation through finished product packaging. These systems are commonly used in:
Cannabis cultivation and greenhouse operations.
Biomass drying and curing processes.
Extraction and post-processing of cannabinoids and terpenes.
Distillation and refinement of oils and concentrates.
Edible, tincture, and vape product manufacturing.
Packaging and labeling for retail distribution.
Used Cannabis Equipment Buying Considerations
When selecting used cannabis equipment, consider both your process requirements and the condition of the equipment:
Process Stage: Identify whether equipment is needed for cultivation, extraction, refinement, or packaging.
Throughput & Capacity: Ensure equipment aligns with your production volume and future growth plans.
Material Compatibility: Verify construction materials meet regulatory requirements and product purity standards.
Automation & Controls: Evaluate system integration, automation level, and ease of operation.
Condition & Compliance: Review maintenance history, cleanliness, and compliance with applicable industry standards.
Why Buy Used Cannabis Equipment
Buying used cannabis equipment allows processors to reduce capital expenditures while accessing proven, industrial-grade machinery. Many systems are available for immediate delivery, helping avoid long lead times associated with new equipment. Used equipment also provides flexibility for scaling operations or entering new markets without significant upfront investment.
Sell Your Used Cannabis Equipment
Aaron Equipment actively purchases surplus and used cannabis equipment across all processing stages, including extraction, drying, distillation, trimming, and packaging systems. If you are upgrading your facility, liquidating assets, or have idle equipment, our team can assist with direct purchases or consignment options to help maximize the value of your equipment.
Cannabis equipment refers to machinery used in the cultivation, processing, extraction, and packaging of cannabis and hemp products. This includes drying systems, extraction units, distillation equipment, trimmers, and packaging lines designed to handle biomass and produce finished goods.
Common types of used cannabis equipment include drying equipment, extraction and processing systems, distillation units, trimming machines, and packaging equipment. Each type supports a specific stage of cannabis production, from raw biomass handling to finished product preparation.
Choosing the right cannabis equipment depends on your production stage, throughput requirements, and product type. Consider whether you need equipment for extraction, drying, or packaging, and evaluate capacity, automation, and material compatibility to ensure it fits your operation.
The cost of used cannabis equipment varies based on equipment type, size, manufacturer, and condition. Specialized systems such as extraction or distillation units typically command higher prices. Contacting a sales representative can help determine availability and pricing for your specific needs.
Yes. Aaron Equipment purchases surplus and used cannabis equipment across a wide range of categories. Whether you are selling individual machines or complete processing lines, our team can evaluate your equipment and provide buyout or consignment options.