Used Horizontal Thermoformers for Sale
Horizontal roll stock thermoformers are automated packaging systems designed to form packages from roll-fed plastic film, fill them with product, and seal them in a continuous horizontal process. These machines heat and mold the lower film into cavities, load the product, and then apply a top film seal, creating airtight and protective packaging. Used horizontal thermoformers are widely utilized in food processing, medical device packaging, pharmaceuticals, and consumer goods industries where high-speed, consistent packaging is required. Aaron Equipment offers used horizontal thermoformers for sale in a range of forming sizes, speeds, and configurations.
Stock No.:
70364026Used Zahoransky Z-Pack 6 Automatic Blister Former, Packer & Sealer – 20+ CPM
Used- Zahoransky Automatic Blister Former, Packer and Sealer, Model Z-Pack 6. Machine is rated for 20+ cycles per minute (depending on product specifications). Can handle forms up to 192mm X 294mm. Has a maximum draw depth of 40mm (can go up to 60 with changeparts and adjustments). Servo-driven. 3/60/480V. Tooled for and last running cardback blisters for toothbrushes. Built 2011.
Stock No.:
72759001Used GEA Powerpak 540 Thermoforming Packaging Machine – Rigid/Tyvek, Medical Grade
Used- GEA Powerpak 540 Thermoforming Packaging Machine; Web width of machine - 540mm; Packaging material - Forming: Rigid, PETG up to .040"; Non forming - Tyvek; Dieset configuration - 4- up, (2tracks x 2row) 3- up, (3tracks x 1row); 10 to 12 cycles per minute; 208 Volts, 3 Phase, 60 Cycle; Compressed Air -100 PSI;Water - 45 Liters per Hour/12 Gallons per Hour; Forming Web Width - 540mm +2 / -0; Non- Forming Web Width - 530mm + 2 -1mm; Film Cores- 3" and 6"; Forming Film Roll Size - 500mm Max OD; Non Forming Roll Size - 500mm Max OD; Vacuum Pumps - Busch 1144 BV forming vacuum pump; Mfg. 2016; Last used on Medical Products.
Stock No.:
73173008Used Multivac R230 Horizontal Roll Stock Thermoformer – 16.5" Film Width, 130mm Depth
Used- Multivac Model R230 Horizontal Stainless Steel Roll Stock Thermoformer. Capable of speeds from 8 - 10 cycles per minute. Film width approximate 16.5". Approximate 130mm max forming depth.
MFR: Multivac
Stock No.:
73445001Used Multivac R-145 Thermoforming Machine – 420mm Web, 4-Up Mold, Inkjet Printer, Medical Packaging, 2009
Used- Multivac Roll-Stock Thermoforming Machine, Model R-145. Includes Bel-Mark Thermal Ink Jet Printer, Model MLB. 420mm web width. 360mm advance, 22 (4 up) mold plate with approximately 6? wide x 7? long pockets, trim wind-up system, 220V/3PH/60HZ.Stainless steel construction, last used in medical packaging. Built 2009.
MFR: Multivac
Stock No.:
73554001Unused Multivac R 245 Rollstock Packaging Machine – 2021 Medical-Grade
Unused Multivac R 245 Fully Automatic Stainless Steel Horizontal Form, Fill and Seal Rollstock Packaging Machine. Hygienic design (IP 65). Machine stands in Clean Design GMP. Format dimensions: Web width 360mm, maximum width is 560mm; Cutoff length 241mm, maximum length is 500mm; Forming depth 70mm, Height max 100mm. Operating range: X Axis 800mm; Z Axis 200mm. Cycle Rate: ca. 35 standard cycles/min (depending on load and distance). Product weight maximum 2500 g. Packaging Material: Bottom web (rigid), Type: PETG, width 362mm, tolerance +2mm, thickness 30mil. Top web (flexible), Type: Tyvek 1059B, width 355mm, tolerance +1mm, thickness 4mil. Busch SV 1025 vacuum pump. Bell-Mark 8.3" EasyPrint MLP Electronic Thermal Transfer Traversing Printer. Optical inspection system, inline machine operation integrated into the machine. Photoelectric print registration. Suction gripper for converging 1 lane, 6 channel. PT 100 temperature sensors, with Multivac plug system. FS 08 cross cutting steel rule punch lower part, FS 87 cross cutting steel rule punch upper part. Trim removal, RSW20 edge trim winder. Machine control IPC 06, operating system Windows Embedded, high temperature, vibration, and EMC stability. 12" touch screen terminal, user interface HMI 2.0. Discharge conveyor with flat top chain, 1700mm long and 400mm wide, single track with frequency converter for speed controlled package discharge. Dimplex Model JHI-1500-DM recirculating water chiller. Machine dimensions: approximate length 9,217mm, approximate width 1,042mm, approximate height 2,350mm. 3/60/480V. Serial # 295976. New in 2021. Was designed to package medical supplies. Still in original crating.
MFR: Multivac
Stock No.:
73367001Used VC999 RS-420 Rollstock Compact MAP Thermoformer – Automatic Vacuum Packaging
Used- VC999 Model RS-420 Rollstock Compact MAP Thermoformer. Stainless steel construction. Film width 423mm (17"). Maximum depth of draw: 50mm, 100mm, 135mm, 185mm (2"). The machine comes with a FT 500 film top automatic labeler The machine works with soft film. Width of film: 420 mm Capacity: 6-8 indexes per minute/360-480 indexes per hour Mould dimensions: Multiple molds included as was previously used for Hot dogs, sausage, beef snacks, and frozen produce. See pics. Rietschle CLFH 220 Vacuum Pump. This machine is a professional automatic thermoforming line, which is used for vacuum packaging of almost all kinds of meat products, fish and seafood, cheeses, salads, vegetables, fruit, confectionery and other food products. Operating principle The packaging is formed automatically by the machine from two films - top and bottom. The product is placed by the operator in cells made of bottom film. Air is automatically sucked out by a vacuum system, sealed, cut and labelled (optional). Forming of trays of different types and sizes is carried out by manual mould change. The operator can program the indexing, speed, time, temperature and vacuum level.
MFR: VC999
Horizontal Thermoformer Applications & Typical Use Cases
Used horizontal thermoformers are commonly used in packaging operations requiring custom-formed packaging. Typical use cases include:
Food products such as meats, cheeses, and ready meals
Medical devices and sterile packaging applications
Pharmaceutical product packaging
Consumer goods and electronics packaging
Industrial component packaging
These systems are ideal for applications requiring sealed, protective, and shelf-ready packaging.
When to Choose a Horizontal Thermoformer
Horizontal thermoformers are best suited for operations requiring high-volume, automated packaging with custom-formed trays or cavities. They are typically selected when packaging needs to be formed in-line rather than using pre-made containers. Compared to pre-made tray systems or pouch machines, thermoformers offer greater flexibility in package design and improved material efficiency.
Used Horizontal Thermoformer Buying Considerations
When evaluating a used horizontal thermoformer, consider:
Forming area and depth: Determines package size and product compatibility
Machine speed and throughput: Ensure alignment with production requirements
Film compatibility: Rigid, semi-rigid, or flexible films based on application
Sealing system: Heat sealing or vacuum/gas flushing for modified atmosphere packaging (MAP)
Controls and integration: Evaluate compatibility with filling, cutting, and downstream systems
Why Buy Used Horizontal Thermoformers
Purchasing a used horizontal thermoformer can significantly reduce capital investment while maintaining high-speed packaging capabilities. Many units are available for immediate delivery, helping facilities avoid long lead times associated with new equipment. Used thermoformers also provide access to proven packaging systems suitable for demanding industrial and sanitary applications.
Sell Your Used Horizontal Thermoformers
Aaron Equipment purchases surplus and used horizontal thermoformers from a wide range of manufacturers and configurations. Whether you are upgrading packaging lines, closing a facility, or selling idle equipment, our team can assist with buyouts or consignment opportunities.
A horizontal thermoformer is a packaging machine that forms containers from plastic film, fills them with product, and seals them in a continuous process. It is commonly used for high-volume packaging.
Thermoformers are used for packaging food, medical devices, pharmaceuticals, and consumer goods. They create custom-shaped packages that protect and preserve products.
Thermoformers form packaging directly from roll stock film, while pre-made tray systems use pre-formed containers. Thermoformers offer greater flexibility and material efficiency.
The cost of a used thermoformer depends on forming size, speed, configuration, manufacturer, and condition. High-capacity or specialized systems typically command higher prices.
Yes. Aaron Equipment purchases used horizontal thermoformers across a range of sizes and configurations. If you have equipment available for sale, submit your details to receive an evaluation.