Used Plate Heat Exchangers for Sale
Plate heat exchangers are compact thermal transfer systems designed to efficiently transfer heat between fluids using a series of thin, corrugated plates. These plates create channels that maximize surface area and promote turbulent flow, improving heat transfer efficiency compared to traditional designs. Used plate heat exchangers are widely utilized in food and beverage, pharmaceuticals, chemical processing, and HVAC systems where space efficiency and thermal performance are critical. Aaron Equipment offers used plate heat exchangers for sale in a range of plate sizes, materials, and configurations to support various heating and cooling applications.
Stock No.:
50410002Unused Alfa Laval Alfa Nova 52-20H Fusion-Bonded Plate Heat Exchanger – 100% Stainless Steel
Unused- Alfa Laval Alfa Nova Fusion-Bonded Plate Heat Exchanger, Model 52-20H, 100% Stainless Steel. Approximate 11 Square Feet. Gasket free copper free, 20 plates, approximate 4" x 20". 1" Diameter internal thread product ports, 3/4" external cooling or heating ports. Temperature S: -196 degrees C. (-302.8 F.)/225 C. (437 F.). Pressure S: (S4S3) -1 bar (-14.5 psi)/26-30 bar (377-435 psi), (S2S1) -1 bar (-14.5 psi)/21-25 bar (304-362 psi). Pressure T: (S4S3) 45 bar (652 psi), (S2S1) 37 bar (536 psi). Serial# 43659870, Built 2015.
MFR: Alfa Laval
Stock No.:
53179001Used Alfa Laval M10-MFG Plate Heat Exchanger – 137.3 Sq. Ft., 100 PSI, Stainless Steel
Used- Alfa-Laval Plate Heat Exchanger, Model M10-MFG. 137.3 Square Feet. (58) 304 Stainless Steel plates, approximately 253mm (9.9") wide x 34" long x 0.40mm thick plates. Rated 100psi at -20 to 190 degrees F. Mounted in expandable frame with (3) legs. Serial# 30105-61105.
MFR: Alfa Laval
Stock No.:
47577007Used Lot of (7) Paul Mueller Dimple Jacket Heat Transfer Plates – Stainless Steel | 14.34 ft² Each | 50 PSI @ 350°F
Used- Lot of (7) Paul Mueller Company Heat Transfer Plates. Dimple jacket style; Made from stainless steel or higher alloy; Approximate OAD: 59" X 39" +2.5" for connection ports X 1" thick; Jacket area dimensions: 54" X 35", or 14.34 square feet per plate; Designed for 50 PSI/F.V. @350; NB registered. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Paul Mueller
Stock No.:
49506004Used Krones Thermowave TL 500 FBXV Plate Heat Exchanger – 1,534 Sq. Ft., 145 PSI, Stainless Steel
Used- Krones Thermowave Plate Heat Exchanger, Approximate 1,534 Square Feet, Type TL 500 FBXV. (10) Chambers each rated 10 bar (145 psi) at 100 degrees C. (212 F.). (307) 254 SMO High-alloy austenitic stainless steel plates approximate 18" wide x 60" tall. Includes (2) spacers, (20) 3-1/4" inlets/outlets. Mounted on an expandable stainless steel frame. Serial# 31891. Built 2008.
MFR: Krones
Stock No.:
47768009Used Tranter Superchanger Plate Heat Exchanger – 3,421.8 Sq. Ft., 316 Stainless Steel, 125 PSI
Used- Tranter UX 816 140 Superchanger plate heat exchanger with approx. 3,422 ft of 316 stainless plate surface and 10" ports, suited for high flow industrial heating, cooling, and heat recovery duties. Model UX-816-140. Approximate (139) 40" wide x 92" tall 316 stainless steel plates rated 125 psi at 38 to 200 degrees F. (4) 10" Diameter inlet and outlets. Mounted on an expandable carbon steel frame. No manufacturers tag.
MFR: Tranter
Stock No.:
54100001GEA Ecoflex VT10 Plate Heat Exchanger For Sale – 145 PSI, 212°F Rated – Approx.
Used- GEA Ecoflex GmbH Plate Heat Exchanger, Model VT10 CDS-17. Approximately 40 square foot area. Approximate (44) Stainless steel plates 31" x 8-1/2" wide. Operating pressure 0 to 145 psi (0 to 10 bar). Operating temperature 32 to 212 degrees F (0 to 100 degrees C). 2" Inlet/outlets. Mounted in an expandable frame. Serial# 169/16856.
Stock No.:
54112001Used Thermaline T13 Plate Heat Exchanger – Stainless Steel, 975,672 BTU/Hr
Used- Thermaline Plate Heat Exchanger, Model T13, Stainless Steel. Approximately 42.9 square feet. Flow rate: 44 GPM (Process Side), 145 GPM (Service process). Heat exchanged 975,672 BTU/Hr. Designed temperature 150 psi at 300 degrees F. Gasket material EPDM, CLIP. (33) Plate material 0.6mm, 316 Stainless Steel, CDX. Frame material 304 stainless steel. Serial# 27423-21.
Stock No.:
54112002Stainless Steel Thermaline Plate Heat Exchanger, 44/145 GPM – Used T13 Model
Pre-Owned Thermaline Plate Heat Exchanger, Model T13, Stainless Steel. Approximately 42.9 square feet. Flow rate: 44 GPM (Process Side), 145 GPM (Service process). Heat exchanged 975,672 BTU/Hr. Designed temperature 150 psi at 300 degrees F. Gasket material EPDM, CLIP. (33) Plate material 0.6mm, 316 Stainless Steel, CDX. Frame material 304 stainless steel. Serial# 27423-22.
Stock No.:
54112003Used Thermaline Plate Heat Exchanger, Stainless steel.
Thermaline Model T13 Plate Heat Exchanger - Used, Stainless Steel. Approximately 42.9 square feet. Flow rate: 44 GPM (Process Side), 145 GPM (Service process). Heat exchanged 975,672 BTU/Hr. Designed temperature 150 psi at 300 degrees F. Gasket material EPDM, CLIP. (33) Plate material 0.6mm, 316 Stainless Steel, CDX. Frame material 304 stainless steel. Serial# 27423-23.
Stock No.:
54112005Buy Used Thermaline T13 Plate Heat Exchanger – 33 Plates, 316 SS
Thermaline T13 Plate Heat Exchanger Stainless Steel, Previously Used. Approximately 42.9 square feet. Flow rate: 44 GPM (Process Side), 145 GPM (Service process). Heat exchanged 975,672 BTU/Hr. Designed temperature 150 psi at 300 degrees F. Gasket material EPDM, CLIP. (33) Plate material 0.6mm, 316 Stainless Steel, CDX. Frame material 304 stainless steel. Serial# 27423-25.
Plate Heat Exchanger Applications & Typical Use Cases
Used plate heat exchangers are commonly used in applications requiring efficient and compact heat transfer. Typical use cases include:
Heating and cooling process fluids in chemical manufacturing
Pasteurization and temperature control in food and beverage production
HVAC and building cooling systems
Pharmaceutical and sanitary processing applications
Heat recovery and energy efficiency systems
These exchangers are ideal for processes requiring precise temperature control and high efficiency.
When to Choose a Plate Heat Exchanger
Plate heat exchangers are best suited for applications requiring high heat transfer efficiency in a compact footprint. They are typically selected when space constraints or energy efficiency are priorities. Compared to shell and tube heat exchangers, plate designs offer greater thermal efficiency and easier maintenance, making them ideal for sanitary and frequently serviced applications.
Used Plate Heat Exchanger Buying Considerations
When evaluating a used plate heat exchanger, consider:
Plate material and gasket type: Ensure compatibility with process fluids and operating conditions
Heat transfer area: Determines capacity and thermal performance
Pressure and temperature ratings: Verify suitability for process requirements
Plate condition and fouling: Inspect for wear, scaling, or damage
Frame and tightening system: Ensure structural integrity and proper sealing
Why Buy Used Plate Heat Exchangers
Purchasing a used plate heat exchanger can significantly reduce capital costs while maintaining efficient heat transfer performance. Many units are available for immediate delivery, helping facilities avoid long lead times associated with new equipment. Used exchangers also provide access to compact, high-efficiency systems suitable for a wide range of industrial applications.
Sell Your Used Plate Heat Exchangers
Aaron Equipment purchases surplus and used plate heat exchangers from a wide range of manufacturers and configurations. Whether you are upgrading systems, decommissioning equipment, or selling idle assets, our team can assist with buyouts or consignment opportunities.
A plate heat exchanger is a thermal transfer device that uses multiple thin plates to transfer heat between fluids. The plate design increases surface area and improves efficiency compared to traditional heat exchangers.
Plate heat exchangers are used for heating, cooling, pasteurization, and heat recovery in industries such as food processing, pharmaceuticals, chemical manufacturing, and HVAC systems.
Plate heat exchangers are more compact and offer higher heat transfer efficiency, while shell and tube exchangers are typically used for higher pressure or temperature applications. Plate systems are often easier to clean and maintain.
The cost of a used plate heat exchanger depends on size, material, pressure rating, manufacturer, and condition. Larger or specialized units typically command higher prices.
Yes. Aaron Equipment purchases used plate heat exchangers across a range of sizes and configurations. If you have equipment available for sale, submit your details to receive an evaluation.