Used Industrial Ovens for Sale
Industrial ovens are thermal processing systems designed to heat, dry, cure, or bake materials under controlled temperature conditions. These units are commonly used for removing moisture, curing coatings, heat treating components, and processing bulk materials across a wide range of industries. Used industrial ovens are available in batch and continuous configurations, with various heating methods including electric, gas-fired, and steam. Aaron Equipment offers used industrial ovens for sale in multiple sizes, temperature ranges, and airflow designs to support diverse drying and thermal processing requirements.
Stock No.:
52325002Buy Used Blue M POM-371A-2 Oven – 8.25 Cu Ft, Electrically Heated
Used- Blue M Model POM-371A-2 Oven. 8.25 Cubic feet capacity. Maximum temperature 212 degrees F (100 C). Stainless steel interior, inside dimensions measure 27" wide X 20" high X 24" deep. Electrically heated, rated for 208/240 Volts, Single phase, 60 Hz. B.O.M. NO. E3-00041. Serial# P20-312.
MFR: Blue M
Stock No.:
54347001Used Grieve Model 323 Bench Oven – 36" x 22" x 42", 150°F, 5 Shelves
Used Grieve Model 323 Large Capacity Bench Oven. Works space dimensions 36" wide x 22" long x 42" high, 19.3 cubic feet volume. Heat input 4.4kW. Maximum temperature 150 degrees F. Product weight 16 to 132 lbs per batch. Electrically heated. 5-Shelves. Manual doors. 1/60/230 Volt, 25 Amp.
Stock No.:
53690001Used Belshaw Adamatic OVEN 2020 Double Rack Oven – 275,000 BTU/hr | Natural Gas/Propane | 2 B-Style Racks | 2019
Used- Belshaw Adamatic Double Rack Oven, Model OVEN 2020. Natural gas or propane with automatic electric switch over; 275,000 btu/hr; Stainless steel construction; Heavy duty rack lift, accepts A, B, or C-styles, 46" long B-style lift, with spare lift for (2) B-style single racks; 39" wide x 75" tall door; 10" diameter exhaust, with 10" to 12" diameter adapter; Dayton 12" diameter exhaust fan; Oven is 72" wide x 62" long plus 30" long exhaust hood; Stainless steel floor insert; Natural Gas or Propane (Electronic automatic switch over). 3/60/208/240V New in May 2019.
MFR: Belshaw
Stock No.:
54239001Used Grieve HC-550 Industrial Oven – Electric, 550°F Max Temp | 30kW
Used Grieve Model HC-550 industrial electric airflow cabinet oven designed for drying, curing, baking, preheating, heat treating, and general thermal processing applications. This Grieve HC-550 oven is rated for 30 kW electric heat input and has a maximum operating temperature of 550F. The unit operates on 460-volt, 3-phase, 60 Hz power and draws 41 amps during operation. It is equipped with a 1.5 HP largest motor load, 5 kA symmetrical short-circuit current rating, and NEMA Type 1 enclosure for basic electrical protection. Built in 2011, Serial / Electrical Drawing Number 103340A0611, this industrial cabinet oven may be suitable for manufacturing, metal parts drying, coating and paint curing, adhesive curing, plastics and composites processing, electronics thermal processing, aerospace and automotive components, laboratory heating, research and development, and other controlled heating applications. This used Grieve industrial oven may be relevant for buyers searching for a used Grieve HC-550 oven, electric cabinet oven, industrial drying oven, airflow cabinet dryer, 550F oven, 30 kW industrial oven, 460V 3-phase oven, heat treating oven, curing oven, or thermal processing oven. Aaron Equipment freight specialists can assist with door-to-door transportation, export documentation, customs paperwork, and equipment logistics.
Stock No.:
54514001Used American Extrusion International One-Pass Oven Dryer, Model 1P1036SAE – Continuous Stainless Steel Dryer Rated Up to 1,000 Lbs/Hour
Used American Extrusion International One-Pass Oven Dryer, Model 1P1036SAE Continuous Stainless Steel Dryer Rated Up to 1,000 Lbs/Hour. Designed for continuous drying applications with production rates of up to 1,000 pounds per hour, depending on product characteristics and application requirements. The unit features a single-pass design with an operating temperature of approximately 350F (50F) and an adjustable product residence time ranging from 1.5 to 8 minutes. Equipped with a Pentair, Model N360846G050 air conditioning system rated for 7777/8166 BTU per hour cooling capacity, the system operates within a temperature range of 50F to 131F and utilizes R134A refrigerant. The refrigeration system is rated for a maximum high-side pressure of 404 PSIG and a low-side pressure of 181 PSIG. Additional features include a user-friendly touchscreen HMI for process monitoring and control, stainless steel construction for durability and sanitation, and leveling feet for stable installation. Overall dimensions are approximately 250" long, 82" wide, and 94" high, 6000#. Electrical requirements are 460 volts, 3 phase, 60 hertz. Serial # 1954-1P1036SAE, Built 2014. This oven dryer was previously utilized in a snack food drying application.
Stock No.:
11453450Used Gruenberg T18HS74.35SS Oven – 74 Cu. Ft. | Steam Heated | Stainless Steel | 55°C | 34,500 BTU | 460V
Used- Gruenberg oven, model T18HS74.35SS, stainless steel construction, approximately 74 cu ft capacity, single door, steam heated, 34,500 btu input, 55 C temp limit, 460 volt, serial# 27720,
Stock No.:
11453451Used Gruenberg Model T18HS74.35SS Stainless Steel Industrial Oven – 74 Cu. Ft. Capacity
Used (1) Gruenberg Model T18HS74.35SS Stainless Steel Industrial Oven. Approximately 74 cubic foot capacity. Single door, steam heated. 34,500 btu input. 55 Degrees C temp limit. 3/60/460 volt. Serial# 0707000021.
Stock No.:
11453452Used Gruenberg T18HS74.35SS Industrial Steam-Heated Oven – 74 Cu. Ft.
Used (1) Gruenberg Oven, Model T18HS74.35SS, Stainless Steel Construction. Approximately 74 cu ft capacity. Single door, steam heated. 34,500 btu input. 55 Degrees C temp limit. 3/60/460 volt. Serial# 27722.
Industrial Oven Applications & Typical Use Cases
Used industrial ovens are utilized in processes requiring controlled heating or drying. Common applications include:
Drying powders, granules, and bulk solids
Curing coatings, paints, and adhesives
Heat treating metal components
Baking or thermal processing of materials
Moisture removal in chemical and pharmaceutical production
These ovens are widely used in industries such as chemical processing, food manufacturing, pharmaceuticals, electronics, and metal fabrication.
When to Choose an Industrial Oven
Industrial ovens are best suited for processes that require consistent, controlled heating over a defined period. They are commonly selected for batch drying or curing applications where uniform temperature distribution is critical. Compared to other drying equipment, ovens are often preferred when precise temperature control, repeatability, and flexibility across different materials or batch sizes are required.
Used Industrial Oven Buying Considerations
When evaluating a used industrial oven, consider:
Temperature range and uniformity: Ensure the oven meets required heating specifications for your process
Chamber size and capacity: Match internal dimensions to product size and batch volume
Heating method: Electric, gas, or steam systems should align with facility utilities and process needs
Airflow and circulation design: Evaluate forced air vs. convection systems for uniform drying or heating
Controls and safety features: Review temperature controls, timers, and safety interlocks for operational reliability
Why Buy Used Industrial Ovens
Purchasing a used industrial oven can significantly reduce capital costs while providing reliable thermal processing capabilities. Many units are available for immediate shipment, helping operations avoid long lead times associated with new equipment. Used ovens also allow facilities to expand capacity or replace existing systems quickly and cost-effectively.
Sell Your Used Industrial Ovens
Aaron Equipment purchases surplus and used industrial ovens from a wide range of manufacturers and configurations. Whether you are upgrading equipment, closing a facility, or selling idle assets, our team can assist with buyouts or consignment options.
An industrial oven is a thermal processing unit used to heat, dry, cure, or bake materials under controlled temperature conditions. These ovens are used across various industries to remove moisture, cure coatings, or process materials requiring consistent heating.
Industrial ovens are used for drying materials, curing coatings and adhesives, heat treating metals, and processing bulk solids or components. They are commonly used in chemical processing, food production, pharmaceuticals, and manufacturing environments.
Industrial ovens provide controlled heating environments with precise temperature regulation, while other drying equipment may focus on moisture removal through airflow or vacuum systems. Ovens are typically used when consistent thermal exposure and uniform heating are critical to the process.
The cost of a used industrial oven depends on factors such as size, temperature range, heating method, configuration, and condition. Larger units or those with specialized features typically command higher prices.
Yes. Aaron Equipment purchases used industrial ovens across a range of sizes and configurations. If you have equipment available for sale, submit your details to receive an evaluation from our team.