Used Tria Process Equipment
Stock No.:
10755147Used Tria Model 900 NS-R Pull Roll Granulator – High-Performance Industrial Granulator
Used Tria Model 900 NS-R Pull Roll Granulator. 12.5" x 40" feed throat (1020mm x 320mm). Five (5) knife open rotor with two (2) bed knives. Rotor is belt driven by a 22 Kw (30 HP). Feed hopper with rear mounted 36" wide steel / serrated pull rolls. Air actuated feed rolls are powered by a 1 Kw (1.5 HP) A/C motor. 9" x 19.5" front material hopper entrance. 12.6 Kw (17 HP) blower discharge with Kongskilde OK160 piping and cyclone with filter bag. Approximate production rate of 400-600 kg/hr. (880-1320 lbs./hr.). Includes free standing panel with controls. 480/3/60
MFR: Tria
Stock No.:
54129002Used Tria Model TR 120 49 Granulator | 50 HP | 1,200 kg/hr | Water-Cooled, Soundproofed Plastic Recycling Grinder
Used Tria Model TR 120 49 Granulator | 50 HP | 1,200 kg/hr | Water-Cooled, Soundproofed Plastic Recycling Grinder. Diameter: 490 mm Rotor Width: 1,200 mm Feed Opening: Approximately 970 mm wide 120 mm high Rotor Type: Open rotor with 5 rows of 2 knives (10 total) Stator (Bed) Knives: 4 total (2 front, 2 rear) Drive Motor: 50 HP (approx. 37 kW) Voltage: 460V / 480V, 3-Phase Frequency: 60 Hz Cutting Chamber: Water-cooled Throughput Capacity: Up to ~1,200 kg/h (varies by material & screen size) Construction: Soundproofed steel enclosure with hinged access doors Screen Area: Large discharge screen for high throughput Feed System: Rear trap-door (ideal for thermoforming line integration) Knife Material: Tungsten-tipped for extended wear life Noise Reduction: Fully enclosed sound-insulated casing.
MFR: Tria
Stock No.:
54129003Used Tria TR 120-49 High-Capacity Granulator | 1,200 kg/hr | 490mm Rotor | 50 HP | Sound-Insulated | Water-Cooled Chamber
Used Tria TR 120-49 High-Capacity Granulator | 1,200 kg/hr | 490mm Rotor | 50 HP | Sound-Insulated | Water-Cooled Chamber. 1200mm rotor width. Approx. 970mm W 120mm H feed opening, rear trap-door feed system. Open rotor w. (5) rows of (2) knives (10 total). (2) front and (2) rear stator knives, (4) total. Water cooled cutting chamber. Large discharge screen. Enclosed in sound-insulated steel enclosure w/ hinged access doors. 50 HP (approx. 37 kW) drive motor, 3/60/460-480V.
MFR: Tria