Used Paul O Abbe Process Equipment
Stock No.:
52106003In-Stock Paul O. Abbe 0.25 Gallon Sigma Mixer with Jacket & VFD Controls
New and In-Stock Paul O. Abbe Model SBM-0.25 Laboratory Sigma Blade Mixer. .25 Gallon Working Capacity. Double U" shaped bowl casting machined on center line. Removable idle end allows blades to be removed. 304 SS. Rated Vacuum Internal. Internal and External welds are continuous, ground smooth, flush and pit free. Internal Surface is 180 Grit, 20-30 Ra. External Surface is Glass Bead Blasted. Free flowing open jacket with baffles for even distribution of heating media. Jacket is constructed of 304 SS and rated 14.7 psig @ 400 Deg. F with NPT Connections. Insulation Shroud is 1" Chloride Free Rock Wool with welded SS Shroud. Cover is a Clear Lexan design with Manual Clamps and Safety Switch. Thermowell is mounted through the Lexan Cover. Manual Tilt to Approx. 105 Degrees. Blades are Cast 304 SS Tangential Sigma Design. Four (4) PTFE packing glands with adjustable stainless-steel followers. Four (4) sealed roller bearing on the drive side only. Driven by a HP all stainless steel motor and stainless steel reducer. 304 SS Support Frame. Controls are NEMA 4X Stainless Steel and Supplied Loose. Includes- HP ABB VFD, Speed control potentiometer, RPM readout (front blade speed), Product temperature readout, Start/stop push buttons, Dual pushbuttons for discharge (see drawing below), Forward/reverse switch, Integration of limit switch on cover, Electrical input: 460 volt, 3-phase, 60 Hz, Dimensions 12" W X 24" H x 24". This Mixer is Brand New and In-Stock. Ready for Immediate Delivery and comes with a 1 Year Warranty. It can be inspected under power in our shop in Belvidere, IL.
MFR: Paul O Abbe
Stock No.:
53008001Used Paul O Abbe RCVD-12 Rota-Cone Vacuum Dryer – 304 Stainless Steel
Used- Paul O Abbe Rota-Cone Vacuum Dryer, Model RCVD-12, 304 Stainless Steel. Vessel volume: 0.61 cubic feet total, 0.4 cubic feet operating. approximately 12" diameter x 6" straight side bowl. Internal rated 200 psig / FV at -20 to 375 degrees F. Jacket rated 60 psi at -20 to 375 degrees F. Driven by a 1/4HP, 3/60/230-460 volt gear motor, through a reducer 51:1 ratio. Speed of rotation 0 - 5 rpm. (2) 4" openings. Mounted on base. National Board# 253, Serial# 11121-439RCVD. 3/60/240 Volt.
MFR: Paul O Abbe
Stock No.:
54043001Used Paul O. Abbe 12" Rota-Cone Vacuum Dryer – 0.5 CuFt, T316 Stainless, Skid-Mounted with Sterlco Heater
Used Paul O. Abbe 12" Rota-Cone Vacuum Dryer 0.5 CuFt, T316 Stainless, Skid-Mounted with Sterlco Heater. Vessel Volume: .5 cuft. T316 Stainless steel. Carbon steel Jacket. $4 Polish interior (180 Grit). Operating temperature: 250 deg F (121 deg C) Speed of vessel: 9 rpm. Full Vacuum to 14.7 psi. Jacket is 14.7 psi Max. With Sterlco Sterl-Tronic Heater. Model M6016-MX, Serial# 73558, 6000 Watts. 150 psig. Serial# of POA dryer is A45546. built 1992. (Vacuum pump not included, but can be provided at extra cost).
MFR: Paul O Abbe
Stock No.:
50140001Used Paul O. Abbe Lab Double Arm Mixer – Model 1BSB, 1 Gal, 316 SS, Hydraulic Tilt
Used- Paul O. Abbe Lab Double Arm Mixer, Model 1BSB, 316 Stainless Steel. 1 Gallon operating capacity (2 total). Carbon steel jacket rated 14 psi. Bowl approximate 7" left to right x 9-1/2" front to back x 6-3/4" deep, tangential sigma blades, front blade 70 to 17 rpm, rear blade 41 to 10 rpm, flat top cover, geared one end. Single ram hydraulic tilt with power pack. Mixer driven by a 2 hp, 3/60/230/460 volt, 814 rpm variable speed motor with reducer. Mounted on legs with base. Serial # A41282.
MFR: Paul O Abbe
Stock No.:
50140002Used Paul O. Abbe Lab Double Arm Mixer – Model 1SBM, 1 Gal, 316 SS, Hydraulic Tilt
Used- Paul O. Abbe Lab Double Arm Mixer, Model 1SBM, 316 Stainless Steel. 1 Gallon operating capacity (2 total). Carbon steel jacket rated 14 psi. Bowl approximate 7" left to right x 9" front to back x 7-3/4" deep, overlapping sigma blades, front blade 53.9 to 13.9 rpm, rear blade 53.9 to 13.9 rpm, flat top cover, geared one end. Single ram hydraulic tilt with power pack. Mixer driven by a 2 hp, 3/60/230/460 volt, 1725 rpm variable speed motor with reducer. Mounted on legs with base. Serial # A39823.
MFR: Paul O Abbe
Stock No.:
53128001Unused Paul O. Abbe Model RCVD 1.1 Sanitary Rota-Cone Vacuum Dryer – 1.7 Cu. Ft.
Unused- Paul O. Abbe (Certified by DCI Inc.) Model RCVD 1.1 Sanitary Rota-Cone Vacuum Dryer. Working capacity. 1.7 Cubic Foot, Total Capacity (12 Gallon). Type 316L Stainless Steel Construction. 18" Inside Diameter Shell that is Electropolished. Sanitary 6" Inlet with Gasketed Cover and 3" Sanitary Outlet, No Valve. Internal Rated 35 PSI/Full Vacuum @ 300 Degrees F. MDMT is -20 Degrees F @ 35 PSI/Full Vacuum. Type 304 Stainless Steel Jacket rated 45 PSI/Full Vacuum @ 300 Degrees F. MDMT is -20 Degrees F @ 45 PSI/Full Vacuum. Jacket Volume is 2-gallon capacity. Vessel is Insulated with 1" Chloride Free Insulation with 316L SS Shroud. National Board, ASME & U Stamped. Includes Stainless Steel Hp TEFC Motor, 400 Volt, 3/50. CE Certified. Hollow Bore Gear Motor. Approx. 8 RPM Output Speed, mounted through Aluminum Frame Gear Reducer at 188.5/1 Ratio. 304 Stainless Steel Tubular Legs and Base. Includes Internal Sanitary Vacuum Line, Gas Purge and RTD Probe. Stainless Steel Rotary Unions. Includes Brake Motor with Inverter, and Positioning Disc. Does Not Include Control Panel. Drawings and Manual are available. Serial Number JS7845A, Built in 2020. Built for a Pharmaceutical Company in the UK and it was NEVER USED. Still in storage in the UK. Ready for Shipment. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Paul O Abbe
Stock No.:
53128002Unused Paul O. Abbe Sanitary Rota-Cone Vacuum Dryer – Model RCVD 1.1 | 316L Stainless Steel
Unused- Paul O. Abbe (Certified by DCI Inc.) Sanitary Rota-Cone Vacuum Dryer, Model RCVD 1.1, 316L Stainless Steel. Working capacity. 1.7 Cubic Foot, Total Capacity (12 Gallon). Type 316L Stainless Steel Construction. 18" Inside Diameter Shell that is Electropolished. Sanitary 6" Inlet with Gasketed Cover and 3" Sanitary Outlet, No Valve. Internal Rated 35 PSI/Full Vacuum @ 300 Degrees F. MDMT is -20 Degrees F @ 35 PSI/Full Vacuum. Type 304 Stainless Steel Jacket rated 45 PSI/Full Vacuum @ 300 Degrees F. MDMT is -20 Degrees F @ 45 PSI/Full Vacuum. Jacket Volume is 2-gallon capacity. Vessel is Insulated with 1" Chloride Free Insulation with 316L SS Shroud. National Board, ASME & U Stamped. Includes Stainless Steel Hp TEFC Motor, 400 Volt, 3/50. CE Certified. Hollow Bore Gear Motor. Approx. 8 RPM Output Speed, mounted through Aluminum Frame Gear Reducer at 188.5/1 Ratio. 304 Stainless Steel Tubular Legs and Base. Includes Internal Sanitary Vacuum Line, Gas Purge and RTD Probe. Stainless Steel Rotary Unions. Includes Brake Motor with Inverter, and Positioning Disc. Does Not Include Control Panel. Drawings and Manual are available. Serial Number JS7845A, Built in 2020. Built for a Pharmaceutical Company in the UK and it was NEVER USED. Still in storage in the UK. Ready for Shipment. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Paul O Abbe
Stock No.:
10715050IN STOCK- Paul O. Abbe, Model RB-10 Ribbon Blender. New.
NEW & IN STOCK- Paul O. Abbe, Model RB-10 Ribbon Blender. In -Stock .10 Cubic Foot working capacity. 11 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 22.1" wide x 38.6" long x 25" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 7.5 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 66 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 11.8" wide x 19.7" long. Approximate 3.2" wide x 9.9" flush air operated plug valve. Discharge housing is approximate 15.4" wide x 19.3" long. Approximately 35.5" discharge height. Approximate weight 1,320 pounds. Approximate overall dimensions: 36.4" wide x 76.4" long x 81.4" high. Controls are available upon request.
MFR: Paul O Abbe
Stock No.:
10715060IN STOCK- Paul O. Abbe Model RB-100 Ribbon Blender. New.
NEW & IN STOCK- Paul O. Abbe Model RB-100 Ribbon Blender. In -Stock .100 Cubic Foot working capacity. 108 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 44.9" wide x 93.8" long x 49.3" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 30 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 31 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 14.2" flush air operated plug valve. Discharge housing is approximate 18.5" wide x 24" long. Approximately 8" discharge height. Approximate weight 7,260 pounds. Approximate overall dimensions: 63.3" wide x 146.4" long x 80.8" high. Controls are available upon request.
MFR: Paul O Abbe
Stock No.:
10715039IN STOCK AND NEW- Paul O. Abbe Model RB-135 Ribbon Blender.
NEW & IN STOCK- Paul O. Abbe Model RB-135 Ribbon Blender. In -Stock .135 Cubic Foot working capacity. 146 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 49.6" wide x 105.5" long x 53.6" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 40 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 33 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 19.7" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 28.4" long. Approximately 8" discharge height. Approximate weight 7,920 pounds. Approximate overall dimensions: 64.8" wide x 158.3" long x 84.7" high. Controls are available upon request.
MFR: Paul O Abbe
Stock No.:
10715043IN STOCK- Paul O. Abbe, Model RB-15 Ribbon Blender.New.
NEW & IN STOCK- Paul O. Abbe, Model RB-15 Ribbon Blender. In -Stock .15 Cubic Foot working capacity. 18 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 24.4" wide x 48.9" long x 28.8" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 10 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 60 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 11.8" wide x 19.7" long. Approximate 4.7" wide x 14.2" flush air operated plug valve. Discharge housing is approximate 18.5" wide x 24" long. Approximately 35.5" discharge height. Approximate weight 1,870 pounds. Approximate overall dimensions: 41.1" wide x 86.6" long x 86.6" high. Controls are available upon request.
MFR: Paul O Abbe
Stock No.:
10715040IN STOCK- Paul O. Abbe Model RB-165 Ribbon Blender. New.
NEW & IN STOCK- Paul O. Abbe Model RB-165 Ribbon Blender. In -Stock .165 Cubic Foot working capacity. 180 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 53.6" wide x 110.3" long x 58.3" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 50 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 28 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 19.7" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 28.4" long. Approximately 4" discharge height. Approximate weight 10,164 pounds. Approximate overall dimensions: 74" wide x 167" long x 85.5" high. Controls are available upon request.
MFR: Paul O Abbe