Used Niro Process Equipment
Stock No.:
48962017Used Niro CC 21T Fluid Bed Dryer/Coater – 10 kg Batch | AISI 304 Stainless | Tablet Coater | Watson-Marlow Pump
Used- Niro Type Fluid Bed Dryer/Coating Pan, type CC 21T. Material of construction is AISI 304 (1.4301) Stainless steel on product contact parts. Working capacity of 10 kg (22 lbs) per batch. Complete with Watson Malow pump, operating panel, control panel and additional infrastructure. Previously used in a Pharma application to coat tablets. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Niro
Stock No.:
53228003Used GEA Niro Mobile Minor Stainless Steel Laboratory Spray Dryer | Pilot-Scale | 1–7 kg/hr | Mobile Unit
Used GEA Niro Mobile Minor Stainless Steel Laboratory Spray Dryer | Pilot-Scale | 17 kg/hr | Mobile Unit. Approximate evaporation rate of 1-7 kg/hr. (2.2-15.4 Lbs./hr.) depending on product. Niro centrifugal air operated atomizer. Approx. 800 mm (31-1/2") diameter x 915 mm (36") straight side. Chamber is lagged and clad. Electric heater, cyclone, pipework and additional infrastructure. Mounted on mobile frame on wheels. Reported in good condition. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Niro
Stock No.:
54304001GEA Niro A/S Mobile Minor Spray Dryer for Sale – 1 to 7 kg/hr, Type MM-PSR
Used GEA Niro A/S Mobile Minor Spray Dryer, Type MM-PSR, Stainless Steel. Approximately 1 to 7 kilograms an hour (2.2 to 15.4 pounds) water evaporation capacity. Electrically heated chamber 800mm (31.4") diameter x 620mm (24.4") straight side x 60 degree coned bottom, maximum inlet 350 degrees C. (662 F.). Air operated lift off top. 2" center bottom outlet with valve. Unit includes a two-fluid bottom up nozzle atomizer, Component size 0.8. Cyclone, blower, filter & control panel. Serial# 3295, Order# 093-2147-1, Built 2008.
MFR: Niro
Stock No.:
52764001Used GEA Niro Production Minor Spray Dryer
Used- GEA Niro Production Minor Spray Dryer, Stainless Steel. Approximate 46.8" (1200 mm) diameter x 31.2" (800 mm) straight side x 31.2" (800 mm) cone bottom. Center bottom outlet. Drying capacity approximate 22 - 33 lbs (10-15 kg) an hour. Natural gas heated by a Rillo FS5D series one stage gas burner. Bottom-up nozzle atomization by a Niro pressure nozzle in fountain mode. Includes cyclone, 2.25HP/1.5 Kw motor, control panel, piping, and additional infrastructure. On 4 legs. Previously used in a ceramic application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Niro
Stock No.:
10151576Used GEA Niro Production Minor Stainless Steel Spray Dryer | 35 kg/hr Evaporation | Industrial Pilot / Small Production Unit
Used GEA Niro Production Minor Stainless Steel Spray Dryer | 35 kg/hr Evaporation | Industrial Pilot / Small Production Unit. Approximate evaporation rate of 35 kg/hr (77 Lbs/hr.) depending on product. Niro centrifugal air operated atomiser. Approx. 1700 mm (66.3") dia. x 1000 mm (39") st. Side with a 1100 mm (42.9") conical bottom. Electric heater, blower, cyclone, pipework and additional infrastructure.
MFR: Niro
Stock No.:
53937001Used Niro Mobile Minor Spray Dryer – Stainless Steel | With Atomizer | Serial #1952
Used Niro Mobile Minor Type HT Portable Spray Dryer, Stainless Steel. Approximate 32" diameter x 24" straight side. Drying capacity approximate 2.2-15.4 lbs (1-7 kilos) an hour. Electrically heated, temperature approximately up to 350 degrees C. Top entering Niro rotary atomizer, air driven. Includes cyclone, control panel. Center bottom outlet. On wheels. Serial# 1952.
MFR: Niro
Stock No.:
10678046Used GEA Niro Type F100 E000 FS S SVC 3A Centrifugal Atomizer – 82.5 HP Rotary Spray Dryer Head
Used- GEA Niro Type F100 E000 FS S SVC 3A. Centrifugal Atomizer for Rotary Spray Dryer. It features a high-speed rotary atomizer (7,250 to 17,750 RPM), 304 Stainless steel drying chamber, and efficient cyclone separation. Capable of handling throughputs up to 17 t/h of evaporated water, it supports inlet temperatures up to 350C and is suited for both aqueous and solvent-based feeds. Driven by an approximately 82.5HP-55Kw motor. Serial# 1246. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Niro
Stock No.:
54209008Buy Used Diosna PMA 25 – cGMP High-Shear Granulator for Pilot Plant & Small-Scale Production
Used Diosna D-Niro-Fielder Model PMA 25, 25-Liter, Stainless Steel. High-shear granulator designed for efficient wet granulation and controlled particle size reduction in pharmaceutical and specialty chemical processing., this batch-style unit features a robust cylindrical bowl with integrated high-shear impeller and optional chopper assembly to ensure thorough mixing, densification, and uniform granule formation. Constructed with sanitary stainless steel contact surfaces, it supports cGMP-compliant production and easy wash-down cleaning. The PMA 25 is commonly used for scale-up, pilot-plant trials, and small-batch production, offering reliable torque transmission and fast processing cycles for powders, excipients, and active ingredients. Manufactured in 1994, Serial No. 830700.
MFR: Niro