Used Werner Pfleiderer Process Equipment
Stock No.:
53949001Buy Pre-Owned Coperion ZSK 160 Twin Screw Extruder — 8 Barrel Sections + Gear Re
Used- Werner Pfleiderer / Coperion Model ZSK 160 Twin Screw Extruder. Co-Rotating. Project No 87-3593. 8 barrel sections. Approximate 14' long screws. Approximate 26:1 L/D. Electrically heated. Gear Reducer with oil cooling system. 2500 HP GE Motor, 3 phase, 4160 volts, reportedly rebuilt by IPS in 2017. Screen changer. Die plate. Werner & Pfleiderer underwater pelletizer. Control panel with Allen Bradley Logix5581E PLC. Associated spare parts.
MFR: Werner & Pfleiderer
Stock No.:
1015138920mm Werner & Pfleiderer Model ZSK20 Co-Rotating Twin Screw Extruder
Used-20mm Werner & Pfleiderer Model ZSK20 Co-Rotating Twin Screw Extruder. Has 40/1 L/D barrel at 43" centerline height driven through a 3:1 gearbox with a 37-Newton meter torque capacity per screw shaft. Extruder is powered by 5 hp AC motor with Allen Bradley 1336 impact drive unit, 588 rpm screw speed. Includes Brabender 1/2 hp model MS-FW40/Optus-70 feeder, spare used motor and gearbox.
MFR: Werner & Pfleiderer
Stock No.:
44974Used Werner & Pfleiderer UK17 Double Arm Mixer – 200 Gal, Stainless Steel Clad, Jacketed
Used- Werner & Pfleiderer Double Arm Mixer, Model UK17, Stainless Steel Clad 200 Gallon. Sigma tangential blades, jacketed bowl (bottom only) 43" front-back x 53" left-right x approximately 36" deep. Geared both ends. Set up for hydraulic tilt 7.5 hp, 220/440V, 1750 rpm. No base, no drive. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Werner & Pfleiderer
Stock No.:
48594Used Werner & Pfleiderer Mixer/Extruder – Type UK12-AU3, 21 Gallon Capacity, Carbon Steel
Used- Werner & Pfleiderer Mixer/Extruder, Type UK12-AU3. 21 Gallon (80 liter) working capacity, 29.1 gallon (110 liter) total capacity. Material of construction is carbon steel on product contact parts. 20-1/2" (530 mm) long x 20-1/2" (530 mm) width x 19-1/2" (500 mm) deep jacketed bowl. Jacket estimated rated for 75 psi (5 bar). Sigma style blades with a speed of 17/21 RPM. Tangential. 6" (150 mm) dia. screw shafts. Standard packing glands. Counter balanced top cover. Screw product discharge. Belt driven thru gearbox by a 22.5HP/15 kw-380V/50cycle/3Ph-1475 RPM motor. Safety belt cover. Screw product discharge by a 11.25HP/7.5Kw-380volt/50cycle/3Ph motor. Frame mounted. Overall dimensions: 85" (2600 mm) long x 52" (1600 mm) width x 5.9" (1800 mm) high. Weight 3 tonnes. Serial # 193951. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Werner & Pfleiderer
Stock No.:
54399008Used Coperion Werner & Pfleiderer ZSK 30-W9/2 Twin Screw Extruder – High-Speed Lab & Production Compounding System
Used Coperion Werner & Pfleiderer ZSK 30-W9/2 Twin Screw Extruder High-Speed Lab & Production Compounding System. (2) 30 mm diameter side by side screws, 33.3:1 L/D ratio, 8 total barrel sections, (7) heated barrels, electrically heated water cooled. Driven by a 10.4 kw(14hp) -440-volt AC drive motor via a gear box. Screw speed maximum 500 RPM. Frame mounted, Control panel. Weight 1.1 tonnes. Extruder: 2800 mm L x 850 mm W x 1300 mm H. Previously used in a compounding application. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.
MFR: Werner & Pfleiderer
Stock No.:
54399001Used Coperion Werner & Pfleiderer ZSK 50 MCC Twin Screw Extruder – 40mm High-Speed Compounding System with Side Feeder
Used Coperion Werner & Pfleiderer ZSK 50 MCC Twin Screw Extruder 40mm High-Speed Compounding System with Side Feeder, Co-Rotating, (2) 40 mm diameter side by side screws, 54:1 L/D ratio, 10 total barrel sections, (9) heated barrels, electrically heated water cooled. Driven by a 181 kw (242.72hp) - 470 volt DC drive motor via a PIV gear box. Screw speed maximum 920-1056 RPM (1) Die head, Frame mounted. (1) Coperion Werner & Pfleiderer ZS.B 58 twin screw side feeder, (1) Cooling Bath, Control panel. Serial# 64012350, Built 2000. 34432 Hours. Weight 7.4 tonnes. Previously used in a compounding application. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.
MFR: Werner & Pfleiderer
Stock No.:
10151368Werner & Pfleiderer ZSK40 Twin Screw Extruder for Sale – 40mm, 50 HP
Used-Werner & Pfleiderer Model ZSK40, 40mm Co-rotating twin screw extruder. 1990 Model year. 46:1 L/D vented barrel with 11-barrel sections and a 41" centerline height. Driven by 50 hp 500 volt 1750/2100 rpm DC motor with SCR control and with a screw speed of 517 rpm. Includes Acrison 1.5 hp weight loss differential feeder, 2.2 kw Tervac vacuum pump, and side feeder.
MFR: Werner & Pfleiderer
Stock No.:
63523Used Werner & Pfleiderer UK1500 X 55 Double Arm Mixer – 400 Gal Working Capacity, 316 SS
Used- Werner & Pfleiderer Double Arm Mixer, Type UK1500 X 55. 316 Stainless Steel construction. Total capacity is 595 gallons (2250 liters). Working capacity is 400 gallons (1500 liters). 5'6" long x 4'9" wide x 4'2" deep (1690 mm long x 1450 mm wide x 1280 mm deep) mixing bowl. Geared one end, cored masticator blades. 7-3/4" shafts. Double jacketed. 2'3" x 1'8" bottom dump outlet. Flat one piece cover with (1) 32" x 34" hydraulic door, (2) 2", (2) 4" x 8" doors, (3) 8" openings.
MFR: Werner & Pfleiderer
Stock No.:
10131017Used Werner & Pfleiderer UK2000AEL Sigma Mixer/Extruder – 316 SS, 793 Gallon Capacity
Used- Werner & Pfleiderer Mixer/Extruder, Type UK2000AEL. 316 Stainless steel construction. Total capacity 793 gallon (3000 liter); working capacity 530 gallon (2000 liter). Bowl 56.6" x 65.5" x 54.6" deep (1450 mm x 1680 mm x 1400 mm deep). Sigma style mixing blades, 7.8" (200 mm) diameter shafts. Double jacketed. Driven via gearbox by a motor. Incl. control panel. Weight 14.8 tonnes. Each blade has a 30 KW Motor and Screw has a 24 KW Motor. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Werner & Pfleiderer
Stock No.:
54399007Used Coperion Werner & Pfleiderer ZSK 70 F175E Twin Screw Extruder – Co-Rotating High Performance Compounding System
Used- Coperion Werner & Pfleiderer ZSK 70 F175E Twin Screw Extruder, Co-Rotating, (2) 70 mm diameter side by side screws, 23:1 L/D ratio, 6 total barrel sections, (5) heated barrels, electrically heated water cooled. Driven by a 108 kw-330-volt AC drive motor via a PIV gear box. Screw speed maximum 198 RPM. Frame mounted, Control panel. Weight 6.4 tonnes. Extruder: 4600 mm L x 2 mm W x 1700 mm H. Control panel 1250 mm L x 700 mm W x 2150 mm H. Previously used in a compounding. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.
MFR: Werner & Pfleiderer
Stock No.:
54399006Used Krupp Werner & Pfleiderer KP-120/250 KombiPlast Compounder with ZS-B 120 Side Feeder
Used- Krupp Werner & Pfleiderer GmbH KP-120/250 KombiPlast Compounder. 6:1 L/D. (1) 250 mm diameter screw x 1500 mm long. screw speed: 4,74-47,5 rpm. Electrically heated. Driven by a 88 kw (132 hp) DC drive motor via a gear box. (1) Die head, Frame mounted. (1) Krupp Werner & Pfleiderer GmbH ZS-B 120 Side Feeder, screw speed: 36.5-365 rpm. Frame mounted. Complete with control panel and additional infrastructure. Weight 22 tonnes. New 2004. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.
MFR: Werner & Pfleiderer