CALL 630-350-2200
View All Equipment Auctions New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Used Alfa Laval Process Equipment

Aaron Equipment has a large inventory of process equipment built by Alfa Laval. Aaron's inventory of Centrifuges, Clean In Place - CIP, Complete Plants, Dryers - Drying Equipment, Evaporators, Filters, General Equipment, Heat Exchangers, Meat Equipment, Packaging Equipment, Pumps, Reactors, Tanks, and Water Treatment Equipment. If you are looking to buy machinery from Alfa Laval submit a request for quote online and if you are looking to sell your used Alfa Laval equipment submit a request online or contact Michael Cohen at 630-238-7480.
Clear
https://ww2.aaronequipment.com/Images/ItemImages/Heat-Exchangers/Shell-and-Tube-Stainless/Alfa-Laval-EH-W15_49896023_aa.jpg
View

Stock No.:

49896023

Used Alfa Laval EH-W15 Heat Exchanger with Control Panel – 60kW, 10 Bar, Built 2014

Used- Alfa laval Model EH-W15 Heat Exchanger. 0,015 m3 (approximately 0.16sqft) shell/tubes volume, 10bar 160 degrees C Shell rating. 3x480 volt, 60kw power requirements. Serial# POM 215963, built 2014. Includes panel. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

https://ww2.aaronequipment.com/Images/ItemImages/Reactors/Stainless-Steel-0-499-Gallon/Alfa-Laval_48996002_aa.jpg
View

Stock No.:

48996002

Alfa Laval Fermenter / Reactor, Approximate 40 Liter (10.5 Gallon), 316L-Unused-

Unused- Alfa Laval Fermenter / Reactor, Approximate 40 Liter (10.5 Gallon), 316L Stainless Steel, Vertical. Approximate 12" diameter x 22" straight side, bolt-on flat top, dished bottom. Internal rated 45 PSI/FV at -20 to 400 degree F. 316L Stainless steel Jacket rated 150 psi/FV at -20 to 400 degree F. Bottom entering agitation 1/2hp drive, missing agitator. (1) Spray ball. Side lug mounted with load cells. National Board #264. Serial #786-100/17. Built 2004. Includes control panel with Wedgewood technology model 653 absorbance monitor, Mettler toledo Jag xtreme digital read out, (4) metering valves. All mounted on stainless steel frame.

MFR: Alfa Laval

https://ww2.aaronequipment.com/Images/ItemImages/Heat-Exchangers/Plate-Type/Alfa-Laval-52-20H_50410002_aa.jpg
Submit Offer $1,000 View

Stock No.:

50410002

Unused Alfa Laval Alfa Nova 52-20H Fusion-Bonded Plate Heat Exchanger – 100% Stainless Steel

Unused- Alfa Laval Alfa Nova Fusion-Bonded Plate Heat Exchanger, Model 52-20H, 100% Stainless Steel. Approximate 11 Square Feet. Gasket free copper free, 20 plates, approximate 4" x 20". 1" Diameter internal thread product ports, 3/4" external cooling or heating ports. Temperature S: -196 degrees C. (-302.8 F.)/225 C. (437 F.). Pressure S: (S4S3) -1 bar (-14.5 psi)/26-30 bar (377-435 psi), (S2S1) -1 bar (-14.5 psi)/21-25 bar (304-362 psi). Pressure T: (S4S3) 45 bar (652 psi), (S2S1) 37 bar (536 psi). Serial# 43659870, Built 2015.

MFR: Alfa Laval

https://ww2.aaronequipment.com/Images/ItemImages/Heat-Exchangers/Plate-Type/Alfa-Laval-TK20-BWFX_54657001_aa.jpg
View

Stock No.:

54657001

Unused Alfa Laval TK20-BWFX Plate Heat Exchanger – 1,118 Sq. Ft., 316 Stainless

Unused Alfa Laval Model TK20-BWFX plate heat exchanger with 1,118 sq. ft. (103.90 m2) heat transfer surface area. Equipped with (126) 316 stainless steel plates with 0.8 mm plate thickness and EPDMC gasket material. Each side is rated for 580 psi at 212 F. Unit has (2) 6" primary inlet and outlet connections and (2) 8" secondary inlet and outlet connections. Rated heat load is 8,127 kW. Serial #AAM1007904, National Board #4696, built 2023. Documentation available. Overall dimensions approximately 84" x 36" x 61" tall. Weight approximately 8,800 lbs. Possible applications include industrial heating, cooling and heat recovery duties handling suitable liquid process streams compatible with 316 stainless steel plates and EPDMC gaskets.

MFR: Alfa Laval

https://ww2.aaronequipment.com/Images/ItemImages/Heat-Exchangers/Plate-Type/Alfa-Laval-TK20-BWFX_54657002_aa.jpg
View

Stock No.:

54657002

Alfa Laval TK20-BWFX Plate Heat Exchanger – 126 Plates, 580 PSI, Unused

Unused Alfa Laval 1118 sq. ft. (103.90 m2) 316 stainless steel plate exchanger, Model TK20-BWFX. Each side rated 580 psi at 212 degrees F. EPDMC gasket material. (126) 316 Stainless steel plates, 0.8mm plate thickness. (2) 6" primary inlet & outlet. (2) 8" secondary inlet and outlet. Heat Load 8,127 kW. Serial# AAM1007910. National Board# 4834. Built 2023. Documentation available. Overall dimensions 84" x 36" x 61"T. Weight 8,800lbs. Possible applications include industrial heating, cooling and heat transfer processes using suitable liquid products compatible with 316 stainless steel plates and EPDMC gasket material.

MFR: Alfa Laval

https://ww2.aaronequipment.com/Images/ItemImages/Heat-Exchangers/Plate-Type/Alfa-Laval-TK20-BWFX_54657003_aa.jpg
View

Stock No.:

54657003

Alfa Laval TK20-BWFX Plate-and-Frame Heat Exchanger – 1,118 Sq. Ft.

Unused 1118 sq. ft. (103.90 m2) 316 stainless steel plate exchanger. Mfg. by Alfa Laval in 2023, Model TK20-BWFX. Each side rated 580 psi at 212 degrees F. EPDMC gasket material. (126) 316 Stainless steel plates, 0.8mm plate thickness. (2) 6" primary inlet & outlet. (2) 8" secondary inlet and outlet. Heat Load 8,127 kW. Serial# AAM1007907. National Board# 4701. Built 2023. Documentation available. Overall dimensions 84" x 36" x 61"T. Weight 8,800lbs. Possible applications include industrial heating, cooling and heat transfer processes using suitable liquid products compatible with 316 stainless steel plates and EPDMC gasket material.

MFR: Alfa Laval

https://ww2.aaronequipment.com/Images/ItemImages/Centrifuges/Decanter/Alfa-Laval-AVNX-4045-AVNX-919B-31G_41174044_aa.jpg
View

Stock No.:

41174044

Used Mobile Wastewater Treatment Decanter System – Alfa Laval AVNX-4045 Centrifuge

Used- Mobile Waste Water Treatment Decanter System consisting of (1) used Alfa Laval AVNX-4045/AVNX 919B-31G Solid Bowl Decanter Centrifuge. 316 Stainless Steel construction (product contact areas). Maximum bowl speed 3250 rpm. Capacity; approximately 150 kg dry solids/hour; 6 m3/hour with 2.5 % dry solids. Single row of lined cake discharge ports, single lead conveyor, base, casing, gearbox with feed pipe, approx. 30 kw main drive motor, back drive. On 4 legs. Incl. (2) control panels, pump, piping, sensors, valves and additional infrastructure. Mounted on trailer. New year 1994. Trailer dimensions: L x W x H: 3500 mm Long x 2000 mm Width x 2140 mm high. Weight 3 tonnes. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

https://ww2.aaronequipment.com/Images/ItemImages/Centrifuges/Decanter/Alfa-Laval-Aldec-404_46431001_aa.jpg
View

Stock No.:

46431001

Used Alfa Laval Aldec-404 Stainless Steel Solid Bowl Decanter Centrifuge

Used Alfa Laval Model Aldec-404 Solid Bowl Decanter Centrifuge With 316 Stainless Steel Product Contact Surfaces, 4,000 RPM Maximum Bowl Speed And 22 kW Main Drive. Industrial horizontal solid bowl decanter centrifuge designed for continuous solid-liquid separation, sludge dewatering, slurry clarification, solids concentration and recovery of suspended solids from compatible industrial process streams. Features 316 stainless steel product-contact construction with a maximum bowl operating speed of 4,000 RPM for centrifugal separation of suspended solids from liquid materials. Equipped with a 110 mm (4.33") single-lead internal screw conveyor with welded hardfacing for increased wear resistance during continuous solids transport and discharge. Includes a single row of lined cake discharge ports for removal of separated solids and moon-style liquid plate dams for controlling liquid discharge level and separation conditions. Fitted with a 2.5 kNm torque-rated gearbox with a 159:1 reduction ratio, a 22 kW (approximately 29.5 HP) main drive motor requiring 380 volts, 3-phase, 50 Hz electrical service, and a DC backdrive motor for controlling differential speed between the rotating bowl and internal screw conveyor. Includes supporting base, casing and feed pipe for product introduction into the centrifuge. Manufactured by Alfa Laval, Model Aldec-404. Possible applications include municipal and industrial wastewater treatment, biological sludge dewatering, chemical slurry separation, suspended solids recovery, industrial effluent clarification, food processing wastewater treatment, mineral slurry dewatering, pigment processing and concentration of other compatible solids-bearing liquid streams.

MFR: Alfa Laval

https://ww2.aaronequipment.com/Images/ItemImages/Centrifuges/Decanter/Alfa-Laval-AVNX-616B-31G_47200002_aa.jpg
View

Stock No.:

47200002

Used Alfa Laval AVNX-616B-31G Stainless Steel Solid Bowl Decanter Centrifuge

Used Alfa Laval Model AVNX-616B-31G Solid Bowl Decanter Centrifuge With 316 Stainless Steel Product Contact Surfaces, 3,250 RPM Maximum Bowl Speed And 11 kW Main Drive. Industrial horizontal solid bowl decanter centrifuge designed for continuous solid-liquid separation, slurry clarification, solids concentration and mechanical dewatering of compatible industrial process materials. Features 316 stainless steel product-contact construction with a maximum bowl operating speed of 3,250 RPM for centrifugal separation of suspended solids from liquid process streams. Equipped with a single-lead internal screw conveyor featuring welded hardfacing for improved wear resistance during continuous solids transport and discharge. Includes moon-style liquid plate dams for controlling liquid pond depth and discharge conditions to optimize separation performance. Features a casing equipped with a cake vibrator to assist with discharged solids handling, along with a feed pipe for introducing process materials into the centrifuge. Equipped with a 2.5 kNm torque-rated gearbox and an 11 kW (approximately 14.8 HP) main drive motor requiring 380 volts, 3-phase, 50 Hz electrical service. Includes supporting base and centrifuge casing. Manufactured by Alfa Laval, Model AVNX-616B-31G. Possible applications include industrial wastewater treatment, municipal sludge dewatering, biological sludge thickening, chemical slurry separation, industrial effluent clarification, food processing wastewater treatment, mineral slurry dewatering, pigment processing and recovery of suspended solids from other compatible industrial liquid streams.

MFR: Alfa Laval

https://ww2.aaronequipment.com/Images/ItemImages/Centrifuges/Decanter/Alfa-Laval-NX314_52211001_aa.jpg
View

Stock No.:

52211001

Alfa Laval NX-314 Solid Bowl Decanter Centrifuge

Used- Alfa Laval NX-314 Solid Bowl Decanter Centrifuge. Max bowl speed 3250 rpm, 316 stainless steel (product contact areas), base, casing, feed pipe, gearbox, main drive motor, safety guards, vibration switch, mounted on four leg stand.

MFR: Alfa Laval

https://ww2.aaronequipment.com/Images/ItemImages/Centrifuges/Decanter/Alfa-Laval-AVNX418_52345021_aa.jpeg
View

Stock No.:

52345021

Used Alfa Laval AVNX-418 Solid Bowl Decanter Centrifuge – 3250 RPM, 40 HP Motor

Used- Alfa Laval AVNX-418 Solid Bowl Decanter Centrifuge, 316 Stainless Steel (product contact areas). Max bowl speed 3250 rpm. Single row of lined cake discharge ports, moon liquid plate dams. Base, bowl diameter approximately 13.8" diameter x 57.4" long. Driven by a 40hp, 3/60/230/460 volt, 1770 rpm motor. Has XP on/off panel. Includes bottom discharge hopper, stainless steel holding tank ( 22" diameter x 45" straight side), Seepex pump, feed pipe, carbon steel frame.

MFR: Alfa Laval

https://ww2.aaronequipment.com/Images/ItemImages/Heat-Exchangers/Plate-Type/Alfa-Laval-TK20-BWFX_54695001_aa.jpg
View

Stock No.:

54695001

Unused Alfa Laval TK20-BWFX Plate and Frame Heat Exchanger – 1,344 Sq. Ft.

Unused Alfa Laval Model TK20-BWFX plate and frame heat exchanger, manufactured in 2024, with approximately 1,344 square feet of heat transfer surface area. Unit is rated for maximum allowable working pressures of 612/235 PSIG at 230F and a minimum design metal temperature of -20F at 612/235 PSIG. Equipped with approximately 0.8 mm plates and an A-dimension of approximately 992 mm. ASME certified and National Board registered, NB No. 65553. Serial number AAN1000484, Alfa Laval order number 18036240. Equipment is identified as a Cathode Cooler, equipment tag NG-21-HX-0001. Certified by Alfa Laval, Richmond, Virginia. Late-model industrial plate and frame heat exchanger suitable for demanding process cooling and heat-transfer applications. Possible applications include liquid-to-liquid process cooling, data center cooling water systems, industrial chilled water systems, heat recovery, cathode cooling, closed-loop process cooling, HVAC heat transfer and other compatible high-capacity industrial thermal management applications.

MFR: Alfa Laval

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions