Used Littleford Process Equipment

Aaron Equipment has a large inventory of process equipment built by Littleford. Aaron's inventory of Dryers - Drying Equipment, Mixers, and Plastics Equipment. If you are looking to buy machinery from Littleford submit a request for quote online and if you are looking to sell your used Littleford equipment submit a request online or contact Michael Cohen at 630-238-7480.
Clear
https://ww2.aaronequipment.com/Images/ItemImages/Mixers/Double-Arm-Mixer/Littleford-100_52882001_aa.jpg

Stock No.:

52882001

Used Littleford Day Mogul Double Arm Mixer – Model 100 – 100 Gallon – Jacketed – 75 HP – Vacuum Lid – Stainless Base

Used- Littleford Day Sanitary Mogul Double Arm Mixer, Model 100. 100 Gallon working capacity (150 total), 304 stainless steel on product contact areas. Jacketed bowl 40" left to right x 42" front to back x approximately 21" deep, rated 125 psi at 353 degrees F. Cored masticator blades, geared one end, hydraulically operated domed top cover suitable for vacuum with power pack sanitary split type stuffing boxes. (2) 6" Diameter bottom outlets. Mixer driven by a 75 hp, 3/60/208-230/460 volt, 1780 rpm motor thru a Foote-Jones reducer, ratio 40 to 1, approximate front blade 41 rpm, rear 27 rpm. Includes a control panel and a Torit stainless steel dust collector. Mounted on a stainless steel base. Serial# 42145-4629. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Littleford

https://ww2.aaronequipment.com/Images/ItemImages/Mixers/Plow-Mixer/Littleford-FKM-4000-D_11059342_aa.jpg

Stock No.:

11059342

Used Littleford Model FKM-4000-D Stainless Steel Jacketed Plough Mixer – 4000L Capacity

Used- Littleford Model FKM-4000-D Stainless Steel Jacketed Plough / Plow Mixer. 4000 Liter Capacity. Jacket rated 75 PSI at 320 Degrees F. National Board# 1272. Driven by 125 HP, 460 volt motor into gear reducer. Serial # 40671-3267. All product surfaces 316 Stainless Steel, polished to 120 Grit. OAD: Approx. 16' L x 6' W x 8' h. RECONDITIONED AND NOT USED SINCE.

MFR: Littleford

https://ww2.aaronequipment.com/Images/ItemImages/Mixers/Plow-Mixer/Littleford-VT-4000_11059274_aa.jpg

Stock No.:

11059274

Used Littleford Vacuum Plow Mixer/Dryer – Model VT-4000 (4000L Capacity)

Used Littleford Vacuum Plow Mixer/Dryer Model VT-4000 (4000L Capacity), 304 Stainless Steel. Approximately 54" diameter x 121" straight side with dished ends. Internal rated 15 PSI/VACUUM @ 250 degrees f., Stainless steel jacket rated for 75 psi at 250 deg.f. 6" diameter shaft, 8 bolt-on plow blades, 2 end scrapers, provision for 4 choppers, air purged main seals. Driven by a 50hp motor through gearbox. Various top openings. 6" diameter off-center bottom outlet. Unit mounted on carbon steel frame. Included VFD Control Panel. National Board# 1260. Serial# 11363.

MFR: Littleford

https://ww2.aaronequipment.com/Images/ItemImages/Mixers/Nauta-Mixer/Littleford-094_54687110_aa.jpg

Stock No.:

54687110

Used Littleford Day Mixing Inc 7 cu ft Nauta mixer. Serial number 1109. Model number 094. Mixer has an overall length of 116", a 54.5" diameter, low pressure dimple jacket rated at 14.9 psi, 304 stai...

Used-Littleford Day Mixing Inc 7 cu ft Nauta mixer. Serial number 1109. Model number 094. Mixer has an overall length of 116", a 54.5" diameter, low pressure dimple jacket rated at 14.9 psi, 304 stainless steel, half lids (one missing), knife valve, and 3 hp drive. Requires 230/460 vac 3 phase electrical supply. Good condition.

MFR: Littleford

https://ww2.aaronequipment.com/Images/ItemImages/Mixers/Plow-Mixer/Littleford-KM-3000-D_54699001_aa.jpg

Stock No.:

54699001

Used Littleford KM-3000-D 74 Cu Ft 304 Stainless Steel Jacketed Plow Mixer

Used Littleford Plow Mixer, Model KM-3000-D, 304 Stainless Steel, Approximate 74 Cubic Feet Working Capacity. Approximate 44" diameter x 116" long chamber. Drum rated Atmospheric, 304 stainless steel jacket rated 75 psi at 32 to 320 degrees F. Approximate 5" diameter shaft with (12) welded on paddles. Driven by a 100 Hp 3/60/460/1780 rpm motor thru Falk gearbox, 13.86 to 1 ratio. Provision for (10) Tulip style choppers each should be driven by a 15 HP motor (5) additional provision. Top openings: 1-1/2", 3", 10", 16". (2) 24" x 16" side access doors. 16" Side bottom outlet. Serial# 41961-4442, Built 1993. Possible applications include high-intensity powder blending, dry ingredient mixing, granulation, particle dispersion and processing of compatible specialty chemicals, mineral powders, fertilizers, construction materials, polymer additives, pigments, detergents and other suitable bulk solid formulations.

MFR: Littleford

https://ww2.aaronequipment.com/Images/ItemImages/Plastics-Equipment/Extruder-Parts-Extruder-Gearboxes/Littleford-60-6-Gimbal-Drive-Unit_54136001_aa.jpg

Stock No.:

54136001

Used B&P Littleford Model 60/6 Gimbal Drive Unit – For Ko-Kneader Anode Paste Mixing

Used- B&P Littleford Model 60/6 Gimbal Drive Unit used for a B&P Ko-Kneader for Anode Paste Mixing. Serial# CK2019/958. Includes Full Lube unit, driven by a 15hp 1800rpm motor. Includes additional Boxes of parts. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Littleford

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.