Contract Packaging Equipment

In-Stock Paul O. Abbe 0.25 Gallon Sigma Mixer with Jacket & VFD Controls

New and In-Stock Paul O. Abbe Model SBM-0.25 Laboratory Sigma Blade Mixer. .25 Gallon Working Capacity. Double U" shaped bowl casting machined on center line. Removable idle end allows blades to be removed. 304 SS. Rated Vacuum Internal. Internal and External welds are continuous, ground smooth, flush and pit free. Internal Surface is 180 Grit, 20-30 Ra. External Surface is Glass Bead Blasted. Free flowing open jacket with baffles for even distribution of heating media. Jacket is constructed of 304 SS and rated 14.7 psig @ 400 Deg. F with NPT Connections. Insulation Shroud is 1" Chloride Free Rock Wool with welded SS Shroud. Cover is a Clear Lexan design with Manual Clamps and Safety Switch. Thermowell is mounted through the Lexan Cover. Manual Tilt to Approx. 105 Degrees. Blades are Cast 304 SS Tangential Sigma Design. Four (4) PTFE packing glands with adjustable stainless-steel followers. Four (4) sealed roller bearing on the drive side only. Driven by a HP all stainless steel motor and stainless steel reducer. 304 SS Support Frame. Controls are NEMA 4X Stainless Steel and Supplied Loose. Includes- HP ABB VFD, Speed control potentiometer, RPM readout (front blade speed), Product temperature readout, Start/stop push buttons, Dual pushbuttons for discharge (see drawing below), Forward/reverse switch, Integration of limit switch on cover, Electrical input: 460 volt, 3-phase, 60 Hz, Dimensions 12" W X 24" H x 24". This Mixer is Brand New and In-Stock. Ready for Immediate Delivery and comes with a 1 Year Warranty. It can be inspected under power in our shop in Belvidere, IL.

MFR: Paul O Abbe

Used Patterson-Kelley 8 Qt Twin Shell Dry Blender – 0.26 Cu. Ft., 304 SS, 1/8 HP Motor

Used- Patterson-Kelley Twin Shell Dry Blender, (0.26) Cubic Feet (8 quart) Capacity, 304 Stainless Steel. (2) 7-1/2" Diameter x 13" long shells, 2 charge ports with (1) cover, (1) missing, oval bottom outlet with cover. Driven by a 1/8 hp, 1/60/115/230 volt, 1725 rpm gearmotor. Mounted on stand.

MFR: Patterson Kelley

Used Winkworth Z2 Vacuum Double Arm Mixer – 1.75L, 316 SS, Industrial

Used- Winkworth Vacuum Double Arm Mixer, Model Z2 Vacuum, 316 Stainless Steel. Working capacity 1.75 liters. Approximate 140mm (5.5") x 140mm (5.5") x 109mm (4.29") deep jacketed vacuum trough. Internal rated 60 psi at 300 degrees C (572 F). Jacket rated for 3.5 bar (50psi) at 300 degrees C (572 F). Dual overlapping sigma style mixing blades. Driven by a .37kw (1/2hp), 3/60/460 volt, 1690 rpm gear motor, manual speed control, output 19 to 95 rpm. Top vacuum cover with 2.5" sight glass. Control panel. Includes VWR international model 1166 temperature controller. Base mounted on cart. Serial# 16564.

MFR: Winkworth

Used Tokushukika Kogyco Agi-Homo Mixer – 20 Gal, 316 SS, Hydraulic Tilt, Jacketed

Used- Tokushukika Kogyco Co Ltd Agi-Homo Mixer, Model 20-50. 20 Gallon (75 liter) working capacity. 316 Stainless steel polished interior. Stainless steel jacketed rated to 40 psi (2.6 bar). Tiltable bowl 18-1/2" (476 mm) diameter x 18-1/2" (476 mm) deep. Counter rotating paddle agitator with end scrapers. 0.4 kw (0.6 hp) 220 volt. In combination with homo mixer. 2-3/4" (97 mm) diameter turbine blade, 1.5 kw (2.25 hp) 220 volt. Hemi bottom. Dish top with hydraulic tilt. 0.75 kw (1.12 hp) 220 volt. 1-1/2" (41 mm) cbo with shut-off valve. Unitized with separate control panel and starters. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Tokushu Kika

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

Used Douglas Aircraft 3-Roll Mill – 2.5" x 7" Rolls, 3/4 HP Motor

Used- Douglas Aircraft 3-Roll Mill. Includes 2-1/2" diameter X 7" face mild steel rolls. Manual spacing adjustment on rolls. Unit includes apron discharge, end plates and electrical panel. Driven by 3/4 HP, 220/440 Volts, 3-phase, 60 Hz, 1725 RPM motor. Foot pedal actuated.

Stainless Hammer Mill by Fitzpatrick – Screw Feeder, Mounted on Casters

Used Fitzpatrick Hammer Mill, Swinging Hammers, with Screw Feeder (no name plate). Approximate chamber 11" x 6". Swinging hammers. Motor: 575 volt, 3500 rpm. Includes feed hopper and screw feeder, stainless steel control panel. Mounted on frame with casters. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Fitzpatrick

Used Friulair Chiller | Model CWM003-UE | 0.71 Ton | R407C Refrigerant | Compact Cooling System

Used- Friulair Chiller, Model CWM003-UE. 0.71 Ton nominal capacity. V0.013 gallon Refrigerant Circuit, R407C with 33.51 oz charge. Serial# 130021582. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used Munson Industrial Rotary Blender – Model MX-1-SS

Used- Munson Industrial Rotary Blender, Model MX-1-SS. 1 cubic foot capacity; Stainless steel mixing chamber; Equipped with liquid spray nozzle. Mounted on portable stand with tilt discharge capabilities. Serial# 12190.

MFR: Munson Machinery

Used AMK VIU4 4-Liter Extrusion Kneader Mixtruder – Stainless Steel Sigma Blade Mixer Extruder with Vacuum Cover

Used- 4 Liter AMK Extrusion Kneader Mixtruder, Model VIU4. Stainless steel construction, vacuum cover, approximately 8" x 8" x 7.5" deep mixing changer, tangential sigma blades driven by 2.2 kw motor drive, discharge extruder driven by 1.5 kw motor drive, jacketed bowl and extruder barrel, on base, serial# 12202. Built 1985.

MFR: AMK

Vestil Hydraulic Drum Dumper for 30 & 55 Gallon Drums – Portable Unit

Used Vestil Model HDD-26-7-P Hydraulic Drum Dumper. Maximum Capacity up to 750 Lbs. Works with 55 and 30-gallon plastic, steel and fiber drums. The unit has a solid steel chute. Portable unit with two rigid and two swivel casters with floor lock screws. All steel construction. Upper travel limit switch, emergency brass safety velocity fuse in cylinder and vertical adjustment drum restraints are standard. Chute is rotated with a hand held control on an 8 ft. long coil cord standard.

MFR: Vestil

Used Yale 2,000 lb. Capacity 24V Electric Sit-Down Forklift – Model MSW020LAN24CS083

Used- Yale Aprox. 2,000 lb. Capacity 24 V Electric Sit-Down Forklift, Model MSW020LAN24CS083, S/N N576930 with 2-Stage 126" Lift Height

MFR: Yale