Plastics Equipment

Used Patterson-Kelley 8 Qt Twin Shell Dry Blender – 0.26 Cu. Ft., 304 SS, 1/8 HP Motor

Used- Patterson-Kelley Twin Shell Dry Blender, (0.26) Cubic Feet (8 quart) Capacity, 304 Stainless Steel. (2) 7-1/2" Diameter x 13" long shells, 2 charge ports with (1) cover, (1) missing, oval bottom outlet with cover. Driven by a 1/8 hp, 1/60/115/230 volt, 1725 rpm gearmotor. Mounted on stand.

MFR: Patterson Kelley

Used Yale 2,000 lb. Capacity 24V Electric Sit-Down Forklift – Model MSW020LAN24CS083

Used- Yale Aprox. 2,000 lb. Capacity 24 V Electric Sit-Down Forklift, Model MSW020LAN24CS083, S/N N576930 with 2-Stage 126" Lift Height

MFR: Yale

Buss Model MKS 30 Laboratory Ko-Kneader Extruder

Used- Buss Model MKS 30 Laboratory Ko-Kneader Extruder, Serial# 97-1030 (1997). 30mm Diameter x approximate 17" long single screw. Throughput rates up to 30kg per hour. 3 Zone barrel electrically heated, water cooled. Water cooled feed throat with hopper. Driven by a 10 hp, 3/60/230/460 volt, 1740 rpm AC motor with reducer. Includes a discharge screw extruder, driven by an approximately 1.5 kw, 3/60/230/460 volt, 1710 rpm gear motor with 2 hole strand die. Includes an operators panel, a control panel with Eurotherm controllers, (2) ABB drive panels. 837 Hours used on the meter.

MFR: Buss

Used Sullair RC-250-460-3-60-A Refrigerated Air Dryer – 250 SCFM

Used- Sullair Model RC-250-460-3-60-A Refrigerated Air Compressed Dryer. 250 Scfm. Maximum air pressure 230 PSIG at maximum air inlet temperature 150 degrees F. R134a refrigerant, 35 ounces. Compressor driven by a 1.77hp, 3/60/208-230/460 volt, 3155 rpm motor. Fan driven by .39HP. Serial#1412SA01020. 3/60/460 Volt.

MFR: Sullair

Used Hytrol Belt Conveyor – 10" Wide x 518" Long | 5 Sections | .5 HP Motor | Carbon Steel Frame on Casters

Used- Hytrol Belt Conveyor. Approximate 10" wide x 518" long belt total. (5) Sections. Driven by a .5hp, 3/60/230/460 volt, 1740 rpm motor. Painted carbon steel frame with casters.

MFR: SpanTech

Used Drais Mannheim Plow Mixer/Dryer – Type TK 400-Turbu Kneter, 400L, 321 Stainless Steel

Used- Drais Mannheim Plow Mixer/Dryer, Type TK 400-Turbu Kneter. Material of construction is 321 (1.4541) stainless steel on product contact parts. Stainless steel mixing body. Total capacity is 14.12 cubic feet (400 liter), Maximum working capacity 10.6 cubic feet (300 liter). Minimum working capacity 4.23 cubic feet (120 liter). Stainless steel double jacketed for heating/cooling rated at 90 psi (6 bar). Heating/cooling surface approximately 17 square feet (1.7 m2). Inside rated for 0 psi at 122 degree F (50 degree C). FM I Becker plows driven via a Stimrad-Aufsteckgetribe gearbox, Type H 2HH 5A by an 82.5HP/55Kw-400 volt AC/50cycle/3PH Non EX motor, Type K 11 R 250 M 4 KT-200H. Mixing speed 175 RPM. Twin screw feeder, driven by 0.55 KW / 0.83 HP - 400 volt AC / 50 cucle / 3 Ph motor, 3.9" (100 mm) bottom outlet valve. Inspection door with counter weights. Overall dimensions: 12' long x 34" width x 54" high (3700 mm long x 1050 mm width x 1650 mm high). Weight 5192 pounds (2360 kgs) empty. Serial # 55918. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Draiswerke

Used Ross Planetary Mixer – 400L, 316L SS, Jacketed with Dual Agitation & Emulsifier

Used- Ross Planetary Mixer, Model: 400 liter vessel, 316L Stainless Steel. 400L (105 Gal) working capacity. Approximately 32" diameter x 35" straight side. Flat top, dished bottom. Internal design pressure rated 5 psi at 77 degrees F. Jacket rated 10 psi at 77 degrees F. Top off center entering emulsifier, driven by a 5hp, 3/60/208-230/460 volt, 3480 rpm motor. Top center agitator with (2) 3 blade propeller, driven by a 2hp, 3/60/208-230/460 volt, 1730 rpm motor thru reducer 46.65:1. Opening Top: 7" for agitator, 5", 4-3/4", 3-1/2" with sight glass, 3", (2) 2-1/2", (2) 2", 1", 1-1/2" for agitator, approximately 1" center bottom outlet. Includes spray ball. Mounted on (4) legs. Serial# SF-509A.

MFR: Ross Industries

Alfa Laval NX-314 Solid Bowl Decanter Centrifuge

Used- Alfa Laval NX-314 Solid Bowl Decanter Centrifuge. Max bowl speed 3250 rpm, 316 stainless steel (product contact areas), base, casing, feed pipe, gearbox, main drive motor, safety guards, vibration switch, mounted on four leg stand.

MFR: Alfa Laval

Used - Buss Paddle Rotary Vacuum Dryer (6000L) – Stainless Steel, Industrial-Grade

Used- Buss Paddle Rotary Vacuum Dryer. (6000 liter) 211 cubic foot working capacity. 316L stainless steel contact parts. 1600mm (62.992") diameter x 4100 mm (161.417") long, dished ends. Rated internal vacuum jacket 2 bar. Openings: top 18", (2) 4-3/4" sightglass; side (2) 11" x 15" inspection doors. Center plug valve outlet 9-1/2". Bare shafted. Driven By 11 Kw 6 RPM Fixed Gear Motor Drive. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Buss

Complete Sheeting Line – 24" Cooling Stack, Puller Cutter, Trim Press & Heater

Used- 24" Vinyletech Abbottstown Sheeting Cooling Stack, Model D9060. Approximately 24" wide x 12" diameter cooling drum, with 21" wide x 12" diameter mating drum, 24" wide x 8" diameter idler drum, serial# 22654, Vinyletech serial# 06181. includes Abbottstown puller cutter combo, model D9051, serial# 22952, Abbottstown trim press, model D8652, serial# 22657, 36 kw Compaheat heating system, model TC4-9-4P4 zone, 9 kw per zone, 208-230 volt, serial# 23010, 75 kva transformer.

Used - American Process TD-24 Cylindrical Plow Mixer, 24 Cu. Ft., Stainless Steel

Used- American Process Cylindrical Plow Mixer, Model TD-24, Approximate 24 Cubic Feet Working Capacity, Stainless Steel. Non-jacketed chamber 30" diameter x 84" long, shaft with fixed plows and end scrapers. Driven by a 30 hp, 3/60/460 volt, 1780 rpm motor thru a Sew reducer, ratio 15.77 to 1. Openings top, (2) side access doors, center bottom outlet. Serial # 4433.

MFR: American Process Systems

Used American Process TD-24 Mixer - 24 Cu. Ft. Capacity, Fixed Plows

Used- American Process Model TD-24 Cylindrical Plow Mixer, Approximate 24 Cubic Feet Working Capacity, Stainless Steel. Non-jacketed chamber 30" diameter x 84" long, shaft with fixed plows and end scrapers. Driven by a 30 hp, 3/60/460 volt, 1780 rpm motor thru a Sew reducer, ratio 15.77 to 1. Openings top, (2) side access doors, center bottom outlet. Serial # 4431.

MFR: American Process Systems