Confectionary Equipment

Used Patterson-Kelley 8 Qt Twin Shell Dry Blender – 0.26 Cu. Ft., 304 SS, 1/8 HP Motor

Used- Patterson-Kelley Twin Shell Dry Blender, (0.26) Cubic Feet (8 quart) Capacity, 304 Stainless Steel. (2) 7-1/2" Diameter x 13" long shells, 2 charge ports with (1) cover, (1) missing, oval bottom outlet with cover. Driven by a 1/8 hp, 1/60/115/230 volt, 1725 rpm gearmotor. Mounted on stand.

MFR: Patterson Kelley

Used Alfa Laval EH-W15 Heat Exchanger with Control Panel – 60kW, 10 Bar, Built 2014

Used- Alfa laval Model EH-W15 Heat Exchanger. 0,015 m3 (approximately 0.16sqft) shell/tubes volume, 10bar 160 degrees C Shell rating. 3x480 volt, 60kw power requirements. Serial# POM 215963, built 2014. Includes panel. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Used Douglas Aircraft 3-Roll Mill – 2.5" x 7" Rolls, 3/4 HP Motor

Used- Douglas Aircraft 3-Roll Mill. Includes 2-1/2" diameter X 7" face mild steel rolls. Manual spacing adjustment on rolls. Unit includes apron discharge, end plates and electrical panel. Driven by 3/4 HP, 220/440 Volts, 3-phase, 60 Hz, 1725 RPM motor. Foot pedal actuated.

sed Aaron Process Lab Sigma Blade Mixer – 1 Gallon – Model LNG-1 – 304 SS – Vacuum Rated – Jacketed – 2 HP DC – With Controls

Used- Aaron Process 1 Gallon Lab Sigma Blade Mixer. Model LNG-1. 304 Stainless Steel bowl measures 7" wide x 9-3/8" long x 8-3/4" deep. Vacuum rated. Top Cover with (2) 2" sight glasses. Jacketed 14.7 psig at 400 degree F. Manual tilt with handle. 2 hp DC motor, 180 volt, 1750 rpm, 9.4 amps. TEFC. 25/1 gearbox ratio. Includes control panel. Speed control with readout, start/stop and E-Stop.

MFR: Aaron Process

Aaron Process LNG-1 1-Gallon Vacuum Jacketed Stainless Steel Sigma Blade Mixer

Used Aaron Process 1-gallon laboratory double-arm sigma blade mixer, Model LNG-1, featuring a 304 stainless steel mixing bowl measuring 7" wide x 9-3/8" long x 8-3/4" deep. The vacuum-rated bowl includes a top cover with two 2" sight glasses and a jacket rated for 14.7 pounds per square inch gauge at 400 degrees Fahrenheit. Equipped with manual handle-operated tilt, a 2-horsepower TEFC DC motor rated for 180 volts, 1,750 rpm and 9.4 amps, and a 25:1 gearbox ratio. Includes a control panel with adjustable speed control, digital speed readout, start/stop controls and emergency stop. Suitable for laboratory mixing, blending and kneading applications involving small batches of viscous or paste-like products.

MFR: Aaron Process

Used Paul O. Abbe Lab Double Arm Mixer – Model 1BSB, 1 Gal, 316 SS, Hydraulic Tilt

Used- Paul O. Abbe Lab Double Arm Mixer, Model 1BSB, 316 Stainless Steel. 1 Gallon operating capacity (2 total). Carbon steel jacket rated 14 psi. Bowl approximate 7" left to right x 9-1/2" front to back x 6-3/4" deep, tangential sigma blades, front blade 70 to 17 rpm, rear blade 41 to 10 rpm, flat top cover, geared one end. Single ram hydraulic tilt with power pack. Mixer driven by a 2 hp, 3/60/230/460 volt, 814 rpm variable speed motor with reducer. Mounted on legs with base. Serial # A41282.

MFR: Paul O Abbe

Used Paul O. Abbe Lab Double Arm Mixer – Model 1SBM, 1 Gal, 316 SS, Hydraulic Tilt

Used- Paul O. Abbe Lab Double Arm Mixer, Model 1SBM, 316 Stainless Steel. 1 Gallon operating capacity (2 total). Carbon steel jacket rated 14 psi. Bowl approximate 7" left to right x 9" front to back x 7-3/4" deep, overlapping sigma blades, front blade 53.9 to 13.9 rpm, rear blade 53.9 to 13.9 rpm, flat top cover, geared one end. Single ram hydraulic tilt with power pack. Mixer driven by a 2 hp, 3/60/230/460 volt, 1725 rpm variable speed motor with reducer. Mounted on legs with base. Serial # A39823.

MFR: Paul O Abbe

Used Yale 2,000 lb. Capacity 24V Electric Sit-Down Forklift – Model MSW020LAN24CS083

Used- Yale Aprox. 2,000 lb. Capacity 24 V Electric Sit-Down Forklift, Model MSW020LAN24CS083, S/N N576930 with 2-Stage 126" Lift Height

MFR: Yale

Used Fairey Microfiltrex LTD (Porvair) Stainless Steel Dust Collector / Pulse Jet Filter System

Used- Fairey Microfiltrex LTD (Porvair) Stainless Steel Dust Collector / Pulse Jet Filter System. Vertical, 316L Stainless Steel. Vessel body 10" diameter x 24" straight side. Shell rated 90 psi / FV at 30 to 212 degrees F. 316L Heads. Jacket rated 90 psi / FV at 30 to 212 degrees R. (4) Approximate 3" diameter x 23" long filter cages. 4", (2) 1/4" Inlets. Certified by Ardeth Engineering - National Board# 623, Serial# 690, Built 1996.

MFR: Fairey Microfiltrex

Used Munson Industrial Rotary Blender – Model MX-1-SS

Used- Munson Industrial Rotary Blender, Model MX-1-SS. 1 cubic foot capacity; Stainless steel mixing chamber; Equipped with liquid spray nozzle. Mounted on portable stand with tilt discharge capabilities. Serial# 12190.

MFR: Munson Machinery

Buss Model MKS 30 Laboratory Ko-Kneader Extruder

Used- Buss Model MKS 30 Laboratory Ko-Kneader Extruder, Serial# 97-1030 (1997). 30mm Diameter x approximate 17" long single screw. Throughput rates up to 30kg per hour. 3 Zone barrel electrically heated, water cooled. Water cooled feed throat with hopper. Driven by a 10 hp, 3/60/230/460 volt, 1740 rpm AC motor with reducer. Includes a discharge screw extruder, driven by an approximately 1.5 kw, 3/60/230/460 volt, 1710 rpm gear motor with 2 hole strand die. Includes an operators panel, a control panel with Eurotherm controllers, (2) ABB drive panels. 837 Hours used on the meter.

MFR: Buss

Used Premier Mill PLM5 Planetary Mixers – 5L Jacketed, 304 SS (1 Working, 1 for Parts)

Used- (2) Premier Mill Planetary Mixers, Model PLM5, 304 Stainless Steel. 5 Liter(1.3 gallon) total capacity, 3 liter(.08 gallon) working capacity. Jacketed mixing can approximate 8-1/2" diameter x 5-1/2" deep. (1) working mixer built 2008, and (1) mixer for parts built 2005.

MFR: Premier