Used Shrink Tunnels - Shrink Equipment

Stock# 70970335

Used-Axon Model EZ-48-SR-6 dual chamber neck band shrink tunnel. Mounted on stainless steel base. Has pneumatic lift for when machine is not in operation. Each chamber is 24"L x 7-1/2"W x 7"T. Have single chamber temperature guages. 3/60/480V.

Stock# 41177260

Used- Eastey Shrink Tunnel, Model ET1610-48, Carbon Steel. Chamber height of 10" and chamber width of 16".Ruggedly built with pull down control panel for easy set up and maintenance. Standard packages per minute is 30 ppm based on an average package size. 4 sided air flow, portable design, mesh conveyor, sealed bearings (not bushings), variable air flow, 3 heater banks 10 kw. Machine dimensions are 24" x 64" x 61". 1/50/220V, 650 lbs.

Stock# 41177265

Used- Eastey Shrink Tunnel, Model ET2008, Carbon Steel. Chamber height of 8” and chamber width of 20”. Ruggedly built with pull down control panel for easy set up and maintenance. Standard packages per minute is 50 ppm based on an average package size. 4 sided air flow, portable design, roller or mesh. Conveyor, sealed bearings (not bushings), variable air flow, 3 heater banks 10 kw. Machine dimensions are 33” x 60” x 74”. 3/50/220V, 900 lbs.

Stock# 41177268

Used- Eastey ET1610-48 Shrink Tunnel. This tunnel has chamber height of 10" and chamber width of 16". Ruggedly built with pull down control panel for easy set up and maintenance. Standard packages per minute is 30 ppm based on an average package size. 4 sided air flow, portable design, roller conveyor, sealedbearings (not bushings), variable air flow, 3 heater banks 10 kw. Machine dimensions are 24" x 64" x 61". 1/50/220V, 650 lbs.

Stock# 41177269

Used- Eastey Shrink Tunnel, Model ET1610-48, Carbon Steel. Chamber height of 10" and chamber width of 16".Ruggedly built with pull down control panel for easy set up and maintenance. Standard packages per minute is 30 ppmbased on an average package size. 4 sided air flow, portable design, mesh conveyor, sealed bearings (notbushings), variable air flow, 3 heater banks 10 kw. Machine dimensions are 24" x 64" x 61". 1/50/220V, 650 lbs.

Stock# 70970329

Used- OAL Associates Recirculating Heat Shrink Tunnel, Model FIRO/R-6/9/36-6L. Opening measures 6"W x 9"H x 36"L. 12 kW. Mounted on a painted carbon steel frame with casters. Elec: 3/60/440V, 14.5a.

Stock# 71566006

Used- PDC Model KRC123656 Neckband/Shrink Sleeve Electric Heat Tunnel. Designed for over conveyor mounting. Tunnel has a 5" wide x 6.5" tall x 80" deep clearance. 3/60/480V.

Stock# 71771003

Used- Shanklin Model T-7F Shrink Tunnel. Machine has adjustable conveyor speeds from 15-120 feet/minute, has an adjustable aperture height of 4" to 8" and an overall width of 22". 15" wide x 75" long Wire mesh conveyor. 20" wide x 7" tall x 43" deep tunnel. Mounted on casters. 3/60/230V. 36A

Stock# 71971002

Used- Shanklin Model T-62SS Stainless Steel High Speed Dual Chamber Shrink Tunnel.Unit is capable of speeds from 25 to 150 FPM. Chamber size 10" high x 18" wide x 61" long. Temperature range: 50 degree F to 500 degree F. Mesh chain conveyor is 93" long and adjustable height from 29" to 42". Equipped with the heaters, air-flow patterns and sufficient chamber length to accommodate most shrink films on the market with maximum shrinkage. Chambers independently controllable for air temperature and velocity. 3/60/230V. Serial # R-98479.

Stock# 72036002

Used-Shanklin Model T-7H automatic shrink tunnel capable of speeds from 25 to 120 feet per minute (depending on materials and application). Tunnel Opening: 12" H x 22" W. Control panel with tunnel on / off switch, temperature controller 50 to 550 Deg F,. 3/60/460V

Stock# 70584040

Used- Shanklin Model T-6XLSS Shrink Tunnel. Rated up to 66 feet per minute, depending on materials and application. Tunnel Opening: 18" wide x 7" high x 30" long. Equipped with 54" long x 11" wide chain conveyor, control panel has variable speed and temperature controls with a temperature range of 50 degree F to 500 degree F and high capacity air velocity blower. Stainless Steel Construction. 230V/1Ph/60Hz/35 Amp.

Stock# 70584050

Used- Shanklin Model T-72 Dual Chamber Shrink Tunnel. Machine is capable of speeds from 25 to 150 linear feet per minute. Unit has tunnel passage dimensions measuring 84" (long) by 22" (wide) by 12" (high). Has a tunnel opening measuring 22" (wide) by 8" (tall), from conveyor. Unit consists of (2) shrink tunnels mounted on a 132" (long) by 14" (wide) Teflon conveyor. Mounted on casters. Was last used to shrink wrap frozen pizza products. 64 amp. 3/60/230V. 64A

Stock# 70803008

Used- Shanklin T-6XL Single Chamber Shrink Tunnel. Rated up to 66 feet per minute, depending on materials and application. Aperture size 8" in height x 18" in width and tunnel size 30" in length. Equipped with an 11" wide x 57" long stainless steel mesh conveyor belt. Control panel has variable speed and temperature controls with a temperature range of 50 F to 500 F and high capacity air velocity blower. Mounted on casters. 1/60/230 35A

Stock# 71102002

Used- Shanklin Model T-7XL Shrink Tunnel. Machine has adjustable conveyor speeds from 15 to 120 feet/minute, has an adjustable aperture height of 4" to 8" and an overall width of 22". Has a 15" wide x 58" long mesh conveyor. 18 Amps. 3/60/480V.

Stock# 71244001

Used- Shanklin Model T-6XL Shrink Tunnel. Has a variable conveyor speed range of 15' to 66' per minute. Has a 30" (long) tunnel with a 7" (tall) x 18" (wide) opening. Has an 11" (wide) mesh conveyor belt with a 48" (long) infeed and a 12" (long) discharge. Has an adjustable conveyor height from 28" to 40". 35 amp. 1/60/230V. Serial# T78103.

Stock# 71026002

Used- Trine Shrink Tunnel for sleeve labeling. Tunnel size 58" long x 6" wide x 8" tall. Has 136" long x 4" wide chain belt, Electric heat with adjustable Omron temp controller, adjustable conveyor speed, two fans, and is electronically heated. 480V/3 Ph/60 Hz 30 KVA.