Used Vertical Auger Filler Form and Fill

Stock# 70424003

Used- Bosch Milk Powder/Infant Formula Continuous Motion Bagging Line, Model SVE 3600 LR. 15 120 bags/minute. The plant receives its powder from an unloaded station and is vacuum conveyed up to Two (2) GEA receiving hoppers and separators. The product is then dropped through two Rotary Valves and into (2) Scan Vibro vibrating screens, then through a Rare earth magnet and into the Two (2) Bosch dosing augers. The product is then gas flushed, Oxygen removed and then delivered into the Bosch Auger filler Hopper where further gas purging occurs and finally into a bag. There are Two (2) Bosch Check weigher's and Two (2) Safeline X ray's machine and a FibreKing Case packer that forms part of the line. Last packing 300gr, 600gr and 900gr bags of Milk Powder/Infant Formula.

Stock# 70424004

Used- Bosch Milk Powder/Infant Formula Continuous Motion Bagging Line, Model SVE 3600 LR. 15 - 120 bags/minute. The plant receives its powder from an unloaded station and is vacuum conveyed up to Two (2) GEA receiving hoppers and separators. The product is then dropped through two Rotary Valves and into (2) Scan Vibro vibrating screens, then through a Rare earth magnet and into the Two (2) Bosch dosing augers. The product is then gas flushed, Oxygen removed and then delivered into the Bosch Auger filler Hopper where further gas purging occurs and finally into a bag. There are Two (2) Bosch Check weigher's and Two (2) Safeline X ray's machine and a FibreKing Case packer that forms part of the line. Last packing 300gr, 600gr and 900gr bags of Milk Powder/Infant Formula.

Stock# 72075001

Used- Fres-Co (Goglio) Model GL14-C Form Fill Seal Machine. Capable of speeds up to 30 packages per minute. Pouch size range: 60mm - 150mm x 40mm - 85mm x 180mm - 420mm height. Fill ranges from 100 - 3,800 cc. Has auger filler with agitated hopper. Valve applicator for releasing gas from coffee, splice table, bottom gusseting attachment, tin tie applicator, top tape applicator for square bag. Last used on ground coffee operation. Vertical form fill with bottom gusset attachment into horizontal transfer for vacuum sealing. Serial# 3128.

Stock# 72328003

Used- Hayssen Ultima UD138 (1219) Vertical Form Fill Seal Bagger with Mateer Auger Filler. Capable of speeds from 30 to 60 ppm. Pouch size range: 2-1/8" to 12" in width; 3" to 16" in length. Approximate 1" wide x 13" long horizontal seal bar, 1/2" wide x 16-3/4" long vertical seal bar. Maximum film width 23". Has tear notch. Includes Servo driven Mateer single head auger filler with screw feeder, and Spee-Dee servo drive and control panel with rexroth servo drive, Direct logic 205 PLC, Yaskawa VFD. Hayssen control panel with Allen Bradley SLC 5/04 PLC Controls, Allen Bradley panelview 1000 HMI, Galil DMC motion controller, NextStep stepping drives. Includes Markem Smart Date 2 Hot stamp coder. Built 2009.

Stock# 72405001

Used- Matrix Packaging MatrixPro Vertical Form Fill and Seal Machine. With All fill Auger Filler, Model Pro Series 201318P. Bag size range: Length of 2" to 18", Width of 2" to 13". Currently set-up with 6" former, other sizes require change parts. Designed for impulse sealed polyethylene and water soluble films. Equipped with Automatic film tracking, film registration, static film eliminator, powered film unwind, 14" horizontal seal bar width, 19" vertical seal bar. Has a CTC Parker HMI with Allen Bradley Micrologix 1500 PLC, KEB combivert VFD. Includes All-Fill 350E auger filler with agitated hopper and level sensor. Includes bulk material incline screw conveyor, approximate 9" diameter x 6" flight spacing x 156" tall. Serial # SB 06014. 3/60/208/230 Volt.

Stock# 72377005

(Unused)- Plan It Packaging Stick Pack 5 Lane Machine. 150-200 ppm with volumetric filler for granular products. 320mm Maximum web width, up to 60-65 cycles/minute per lane. Open frame design, fully closed volumetric rotary filling unit.