Used Paddle Mixers

Stock# 48091001

Used- American Process Twin Shaft Fluidized Zone Mixer, Model FZM-4S. 4.2 Cubic feet, 120 liters, Carbon Steel. Non-jacketed trough approximate 33" long x 29" wide x 24" deep. (2) 2" diameter shafts each with (14) 5-3/4" wide x 1/8" thick paddles welded to 1" posts. Driven by a 5 hp, 3/60/230/460 volt, 1680 rpm motor. (2) Breaker bars driven by a 1 hp, 3/60/230/460 volt, 1720 rpm motors. (2) approximate 26" x 6" bottom outlets. Has side lugs. Serial# 4388. Built 1995.

Stock# 50537001

Used- A&J Mixing Specialist Forberg Fluidized Zone Twin Shaft Mixer, Model F120C, Carbon Steel. Approximate 4.2 cubic feet capacity. Minimum volume 48 liters, maximum volume 168 liter. Trough approximately 28-1/2" wide x 33" front to back x 24" deep. Driven by a 3 hp, 3/60/230/460 volt, 1740 rpm motor thru Renold gearbox. 30" diameter discharge ring. 8" Discharge height. 6" Diameter top inlet with slide gate valve. Air operated bombay discharge doors. Includes Foremost top mounted receiver hopper. Mounted on frame. Serial # 90118.

Stock# 50537003

Used- A&J Mixing Specialist Forberg Fluidized Zone Twin Shaft Mixer, Model F120C, Carbon Steel. Approximate 4.2 cubic feet capacity. Minimum volume 48 liters, maximum volume 168 liter. Trough approximately 28-1/2" wide x 33" front to back x 24" deep. Driven by a 3 hp, 3/60/230/460 volt, 1740 rpm motor thru Renold gearbox. 30" diameter discharge ring. 25" Discharge height. 6" Diameter top inlet with slide gate valve. Air operated bombay discharge doors. Includes Foremost top mounted receiver hopper. Serial # 91103.

Stock# 10147024

Used- Draiswerke Turbulent Dryer (1x), Type HT-160 A, No 50561, New 1981, Material stainless steel (1.4571), Capacity 160 Ltr, Trough sizes dia. 505x900mm, Inlet dia. 300mm, Outlet dia. 125mm, Working pressure vac/6 bar, Test pressure 7,8 bar, With jacket (18 Ltr), Trough sides jacketed (2,7+1,5 Ltr), Working pressure 6 bar, Test pressure 9,1 bar, Max. temperature 200 Degr. C., With mechanical seal, Motor 12,0 KW, 380 Volt (Ex), Floorspace 4,6x1,3 M (in open position), Total height 2,2 M (without filter)

Stock# 14114033

Used- Forberg Stainless Steel Paddle Blender. 7 cubic feet (2,000 liters). Model FZM 7. Fluidized zone mixer. Interior Dimensions: 39.5'' x 33.5'' x 30.5" Deep. Counter rotating paddles. Bombay door discharge. Motor 2.5/3 HP, 575 volt, 1690/3400 RPM.

Stock# 10147127

Used- Draiswerke Powder Turbo Mixer, Model HT-250. Capacity 8.82 cubic feet (250 liters). Motor 25 hp (18.5 kW). Trough size diameter 27.55" x 29.53" (700 x 750 mm). (1) Inspection hatch 19.68" x 11.81" (500 x 300 mm).

Stock# 50866001

Used- Ross Batch Type Paddle Mixer, Model 42P-10SS, Stainless Steel. Working capacity 10 cubic feet (74 gallon), total capacity 13 cubic feet. Non jacketed trough 48" left to right x 21" front to back x 25" deep. Approximate 3" diameter shaft with (6) 3/16" thick paddles welded on 1" diameter posts. Driven by a 7.5 hp, 3/60/230/460 volt, 1750 rpm motor. (2) Piece top hinged cover. 4" Tri-clamp center bottom outlet with butterfly valve. Mounted on Stainless Steel frame. Serial # 113131.

Stock# 48832001

Used- Paul O. Abbe Cross Flow Mixer / Twin Shaft Fluidizer, Model AF350, 304 Stainless Steel. 12.4 Cubic feet working capacity, maximum 17 cubic feet. Non-jacketed trough approximately 39-3/8" wide x 49-1/2" long x 35" deep. (2) Approximate 3" diameter shafts with (28) 8" wide x 7" long x 3/16" thick paddles welded with 1-1/4" diameter posts. Bolt on top cover with (2) hinged doors, (2) side access doors. (2) Bombay outlet door, air operated. Driven by a 7.5 hp, 3/60/230-460 volt, 1720 rpm motor with with 24.40:1 gearbox ratio. Mounted on a painted carbon steel frame. Serial# A48097.

Stock# 50047001

Used- Dinnissen Pegasus Twin Shaft Fluidized Paddle Mixer, 10 to 17 Cubic Feet Capacity, Type 305-500-7.5, Stainless Steel. Non-jacketed chamber approximate 51-1/2" Front to back x 45-1/2" left to right x 27" deep. (2) 3" Diameter shafts each with 9" wide x 3/8" thick paddles, welded to 1-1/2" diameter posts. Driven by a 7.5 kW, 3/50/400/690 volt, 1460 rpm motor thru (2) shaft mounted reducers, ratio 24.6 to 1. Flat bolt on top cover with charge ports, dual Bombay style air operated discharge doors with a bolt on coned hopper, side access doors. Serial # 140293, built 2014, CE certified. Includes a BG Filtration dust collector, Type AASU0.6/2SW, SR, V2A, stainless steel. Serial # 14020231, built 2014. (3) Hartgen screw conveyors, (1) Servolift 250 kg lift with carriage, (3) carts, hopper and miscellaneous parts. Previous used in a coffee application.

Stock# 49567011

Used- Will Flow Paddle Blender, Approximately 19 Cubic Feet, Stainless Steel. 28" Wide x 48" long x 31" deep dimple jacketed trough with a 15" tall welded top extension, rated 55 psi at 300 degrees F. Approximate 2" diameter shaft with (3) paddles, welded to 1-1/4" diameter posts. Top cover, Driven by an approximate 3hp gear motor. 3" End bottom outlet with a Waukesha positive displacement pump, model 060, serial# 143944, set up for hydraulic drive, no power pack. Blender mounted on 4 stainless steel legs. National Board# 5556, serial# 50873, built 1987.

Stock# 51127001

Used- Feldmeier Chocolate Melter, Approximate 200 Gallon, 316L Stainless Steel. Jacketed trough approximate 36" left to right, 36" front to back, 48" deep. 304 Stainless steel jacket rated for 100 psi at -20 to 350 degrees F. Approximate 5" diameter shaft with (2) 22" wide x 14 1/2" long x 3/4" thick paddles. Driven by a 5 hp, 3/60/230/460 volt, 300-1800 rpm with gearbox, 121.46 to 1 ratio, 2.5 to 15 rpm output. 4" Center bottom outlet, 9" discharge height, less valve. Mounted on painted carbon steel frame. National Board # 7412, Serial # E055409. Built 2009.

Stock# 50592001

Used- Marion Paddle Mixer, Model 6041, 304 Stainless Steel. Approximate working capacity 30 cubic feet, total capacity 41 cubic feet. Non-jacketed trough 48" long x 36" wide x 45" deep. Approximate 3-1/2" diameter shaft with (4) paddles welded on 1-3/4" diameter posts. Driven by a 10 hp motor. (2) Piece clamp-on top cover. 6" x 6" bottom discharge with flush contour air operated valve. Mounted on painted carbon steel legs. Serial # 84005.

Stock# 10151253

Used- Marion Paddle Mixer, Model FP-3648. 30 Cubic foot working capacity. 304 Stainless Steel. Jacketed trough measures approximately 51" long x 38" wide x 51" deep. Jacket rated 150 PSI at 100 degrees F. Closed top cover with bolt down cover. 8" offcenter discharge with Norbro ball valve. Driven by a 15 hp, 3/60/460 volt motor thru reducer.

Stock# 49143001

Used- American Process Systems Forberg Fluidized Zone Mixer, Model FZM-35, 35 Cubic Feet Working Capacity, 304 Stainless Steel. Non-jacketed chamber approximate 58" long x 67" wide. (2) 4" Diameter shafts with (16) paddles per shaft, paddles 11-9/16" wide x 3/8" thick welded to 1-1/2" diameter posts. Driven by 30 hp, 3/60/208-230/460 volt, 1760 rpm motor with 30.05:1 gearbox ratio. (2) 20" x 20" side access doors, (2) 9" x 57" Bombay door style outlets. Includes stainless steel stand, Bag Dump Station. Serial# F1041. Built 1995.

Stock# 11585041

Used- Marion Paddle Mixer, Model SPY3672. Stainless Steel sanitary construction. approximate 45 cubic feet. 36" wide x 72" long x 46" deep. Approximately 8" center bottom outlet. 15 hp motor 3 phase 60 cycle 230/460 volt 1740 rpm with reducer. Previously used in food application.

Stock# 10128038

Used- Marion 45 Cubic Foot Paddle Mixer, Model 4020. Series 4000. 45 cubic foot working capacity, 62 cubic foot total volume. Mixer is driven by a 20 hp 1755 rpm motor through gear reducer down to 38 rpm. The mixer is an open top with a 36" x 35.75" opening and a 36" x 14.25" opening. The mixer bottom has an 8" diameter flanged center discharge with butterfly valve 32" from ground. The mixer has 36" diameter paddles with a 2.75" diameter shaft. Mixing chamber is 72" long x 36" wide x 45" deep. Overall dimensions are 56" wide x 114" long x 85" tall. Requires 230/ 460 vac 3 phase electrical supply.

Stock# 51171001

Used- Halvor Forberg AS Batch Paddle Blender/Mixer, Type F1000. Material of construction is stainless steel. Total capacity 49.44 cubic foot/369 gallon (1400 liter). Maximum working capacity 35.3 Cubic foot/264 gallon (1000 liter). Minimum working capacity 14.12 cubic foot/105 gallon (400 liter). Dual mixing shafts with paddles. (2) 22.5 HP+15 Kw-380volt/50cycle/3Ph drive motors, one for each shaft. Inspection door. Manual load, bulk product dump infeed with protection gate. Includes Feed hopper and control panel. New 1987. Overall dimensions blender/mixer only: 81" (2490 mm) long x 66" (2010 mm) width x 57" (1760 mm) high. Weight 4.2. tonnes. Previously used for blending/mixing of batches of food stuff in a contract manufacturing facility.

Stock# 11059140

Used- American Process Systems Paddle Blender, Model FZM-53. (53 Cu.Ft./1500 Liter) Twin shaft fluidized zone mixer/paddle blender. 304 stainless steel. 30 hp 230/460 volt motor. Mixer paddles are 25 rpm. Includes control panel. Last used in a sanitary application in pharmaceutical plant.

Stock# 46727001

Used- American Process Forberg Twin Shaft Fluidizer Zone Mixer, Model FZM-70, 70 Cubic Feet Capacity, 304 Stainless Steel. Non-jacketed chamber approximately 73-5/8" wide x 86-1/16" long x approximate 60" deep. (2) Approximate 5-1/2" diameter shafts with 14 paddles (28 total) 14-1/2" x 12-1/2" x 5/16" thick welded to 2-3/4" diameter posts. Driven by a 50 hp, 3/60/230/460, 1760 rpm gear motor, 37.42 to 1 ratio, approximate 23 rpm agitator speed. (2) Air operated Bombay bottom outlet doors, approximately 12" wide x 72" long. Bolt on top cover with 17" feed, 6", 4" vent, 12-1/2" x 12-1/2" and (2) hinged access doors, (4) 20" x 20" hinged side access doors. Split packing glands with air purge seals, outboard roller bearings. Serial# 5136, built 1998.

Stock# 43199001

Used- Hough Forberg Twin Shaft Fluidizer, Model FB500002. 176.6 Cubic Feet Working Capacity, Carbon Steel. Non-jacketed trough approximate 98" wide x 118" long x approximately 60" deep. Top pin mill bar, driven by a 10 hp, 3/60/460 volt, 1750 rpm motor. (2) Shafts with paddles welded to posts. Mixer driven by a 100 hp, 3/60/230/460 volt, 1160 rpm motor thru a dodge reducer, ratio 25.60 to 1, approximate output 68.4 rpm. (2) Air operated bombbay style bottom discharge doors with chute and air operated slide gate valves. Includes a top removable cover with openings.

Stock# 50729001

Used- Scott Indirect / Vacuum Paddle Dryer, 191 Cubic Foot, 304 Stainless Steel. Chamber is 54" x 144" for 114 cubic foot of mixing capacity and 191 cubic foot total capacity. Hot oil ASME rated to 150 psi at 550 degree F, working pressure is 20 degree F at 150 psi. 50 hp 3/60/230/460V. Includes control panel, hot oils system, vacuum system and load cells. Serial # 605-2734.

Stock# 10749107

Used Littleford Paddle Mixer; Model FKM8000D; Carbon Steel; 283 cubic feet total capacity; 198 cubic feet working capacity; 75 PSI at 320 degrees F; 75 HP drive; 1770 RPM; 230/460 volts; (2) 18" x 24" access dorrs; 30". 12". 8", 2" top nozzles; 10" center bottom outlet; 50'2" Diameter x 13' Long.

Stock# 10749108

Used Littleford Paddle Mixer; Model FKM15000D; Carbon Steel; 530 cubic feet total capacity; 371 cubic feet working capacity; full vacuum; 72 PSI at 320 degrees F; Cooling style plows; (6) chopper-less Choppers; (3) 16" x 24" access doors; (2) 12", (2) 8", 2" top nozzles; 10" CBO with pneumatic butterfly valve; 150 HP; 460 volts; explosion proof motor; Falk Gearbox; 6'6" Diameter x 16'6" Long; Mfg. 1984

Stock# 50908001

Used- HC Davis Paddle Mixer, Model S160A, Carbon Steel. Approximately 500 cubic feet working capacity (depending on product). Non-jacketed Trough approximately 160" Long x 80" Wide x 84" Tall. Approximately 10" diameter shaft with (20) plows on 4" diameter posts. Driven by a 100 hp, 3/60/460, 1775 rpm motor. Top bolt-on cover with approximate 12" x 12" feed opening, 53-1/2" long x 26-1/2" wide opening with safety grate and hinged cover. Side openings: 24" x 24" with hinged door. 8" Wide x 8" long bottom end discharge with cover. Approximate 12" x 12" center bottom outlet. Includes AC Tech AC motor drive panel. Mounted on a painted carbon steel frame on (2) legs. Serial # 00162.