Used Blown Film Lines

Stock# 10755155

Used- Keifel 40 mm Blown Film Line, Model CA4, 24:1 L/D. Lowboy extruder having an electrically heated, air-cooled barrel. A second complete barrel, screw, and heaters are included to convert the machine to a 30:1 L/D ratio. Gearbox is belt driven by a 30 HP Reliance D/C motor with SCR control. Includes hopper, water cooled gearbox, grooved feed throat, and operator control panel with seven (7) zones of temperature control. Instrumentation includes controllers for (4) barrel zones, (3) die zones, blower control, speed control dial, and gauges for extruder Amps, RPM, pressure, and melt temperature. S/N 0205. Manufactured in 1989. Very clean. 460/3/60 input power. Includes a 3? stationary blown film die less air ring. Includes 6.1 Kw air ring blower with 4 port plenum and a 38? Kiefel Model FW 811 single position surface winder for 36? diameter rolls. Includes winder operator control panel with preset footage counter, auto fly knife, auto transfer, second pull roll assembly, and two winding shafts. S/N 0141. 460/3/60 input power. Very Clean.

Stock# 47147027

Used- Windmiller & Hilscher Varex IIVAREX II / FILMTICO S IIVAREX II- Blown Film Line- 9 layer. The universal line of high-performance blown films for demanding applications. The machine is a film extrusion facility with a film winder. Its purpose is to manufacture flexible multilayer films (barrier films) of thermoplastic. The machine is suitable for processing the following raw materials: Polypropylene (PP) Polyethylene (PE) Polyamide (PA) Barrier material (e.g. EVOH) Polystyrene (PS) Adhesive agents (AA)The machine cannot process the following materials: synthetic materials containing chlorine such as polyvinyl chloride (PVC) toxic raw materials Explosive raw materialsThe Line is equipped with 9 extruders. One of the E" extruders has a specific design for use, which allows EVOH layers from 1 micron.The line is equipped with a TURBO-CLEAN dosing system, which allows a rapid change of formulation.The modular line is prepared to include an MDO.It has a parallel INOEX gravimetric dosing system and hoppers.

Stock# 52825001

Used- Southern Costal Machinery, LLC 24" Melt Blown Line. Production capacity approximately 36 kg (79.3 lbs)/ hour at nominal throughput of 0.5 ghm. Line consists of: Pneumatic pellet loader; 40 kg hopper with sightglass; 2.5" diameter extruder, 24:1 L/D, 4 zone, high temperature heaters, air cooled, 20hp VFD, (70 kg/hr maximum) with motor and gearbox. Electrically heated manual screen changer, steel to steel seals, circular type filter screen; Polymer melt pump, monitoring tied to variable speed drives, electronic melt transducers; Transfer pipe with in-line mixer port; Die and Nozzle, 24" active spray width, 17-4ph stainless steel die assembly, 300 degrees C compatible; 35 kW air heater; 450 CFM blower; Stainless steel forming screen with VFD, manual DCD; Electrostatic charger, (5) slitting blades for edge trim, trim removal; Winder with pneumatic tension control; Control panel, HMI, automatic control, air temperature, air flow, extrusion process, winder/product speed. Markets include HEPA filters, ULPA filters, liquid filers, oil separators, oil sorbents, wipes, barrier, fabrics, and medical fabrics, as well as other Thermoplastic Polymers.