Stainless Steel 0-499 Gallon

Stock# 48125051

Used- LEE Industries Jacketed Mixing Vessel, 114 Liter (30 Gallon), Model 30U, Stainless Steel. Approximately 26" diameter x 20" Straight Side. Jacketed for 100 psi at 338 Degrees F, top mounted Silverson Emulsifier, model BX60, serial# 2CB2287, Lee serial# C5333A, national board# 7256, built 1997.

Stock# 50757001

Used- Gifford-Wood AGI-Mixer, Model V/P-A, Serial# 1957. Consisting of: (1) J.C. Pardo & Sons Vacuum Kettle, 40 Gallon, 316 Stainless Steel. Approximate 26" diameter x approximate 26" deep. Lift out clamp on domed top cover, hemispherical bottom. Internal rated 15 psi or full vacuum at 250 degrees F. 304 Stainless steel jacket rated 40 psi at 287 degrees F. Tilt out agitator bridge with inner bar agitator and an anchor style scrapper agitator. (1) Gifford Wood homogenizer mixer, all set up for hydraulic drive. 2" Center bottom outlet. Mounted on (4) legs. Serial# 4402, National Board# 2158. Built 1984. Includes an operator panel, control panel, 0.75hp circulation pump and a Watlow electric heater. Mounted on a common carbon steel base.

Stock# 49564023

Used- Lee Industries Triple Motion Vacuum Kettle, 50 Gallon. Model 50U7S, Stainless Steel. Internal full vacuum rated, jacket rated 100 psi at 338 degree F. Removable dished top head. Top mounted agitators: anchor style agitator with motor, off center 1 hp two tier turbine agitator, and off center 10 hp emulsifier. Mounted on legs. National Board# 9798, Serial# 33526-1-2, Built 2004.

Stock# 49564025

Used- Lee Industries Triple Agitated Kettle, 50 Gallon. Model 50U7S, Stainless Steel. Internal full vacuum rated, jacket rated 100 psi at 338 degree F. Removable dished top head. Top mounted agitators: anchor style agitator with motor, off center 1 hp two tier turbine agitator, and off center 10 hp emulsifier. Mounted on legs. National Board # 11177, Serial # 50371-4-1. Built 2007.

Stock# 49564030

Used- Lee Industries Triple Agitated Kettle, 50 Gallon. Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor drive, off center turbine style agitator with 1hp motor drive. Mounted on legs. National Board# 9950, Serial# 34960-5-7, Built 2004.

Stock# 49564032

Used- Lee Industries Triple Agitated Kettle, 50 Gallon. Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor drive, off center turbine style agitator with 1hp motor drive. Mounted on legs. National Board# 9948, Serial# 34960-5-5, built 2004.

Stock# 49564033

Used- Lee Industries Triple Agitated Kettle, 50 Gallon. Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor drive, off center turbine style agitator with 1hp motor drive. Mounted on legs. National Board# 9949, Serial# 34960-5-6, Built 2004.

Stock# 49564034

Used- Lee Industries Triple Agitated Kettle, 50 Gallon. Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor drive, off center turbine style agitator with 1hp motor drive. Mounted on legs. National Board# 9944, Serial# 34960-5-3, Built 2004.

Stock# 49564035

Used- Lee Industries Triple Agitated Kettle, 50 Gallon. Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor drive, off center turbine style agitator with 1hp motor drive. Mounted on legs. National Board# 9945, Serial# 34960-5-4, Built 2004.

Stock# 49564037

Used- Lee Industries Triple Agitated Kettle, 50 Gallon. Model 50 U7S, 316L Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dished top. Internal rated full vacuum. 304 Stainless jacket rated 100 PSI @ 338 F. Top mounted anchor style agitator with motor, off center Ross HSM 510 emulsifier with 10 hp motor drive, off center turbine style agitator with 1hp motor drive. Mounted on legs. National Board# 9936, Serial# 34960-5-1, Built 2004.

Stock# 49564038

Used- Lee Industries Triple Agitated Kettle, 50 Gallon. Model 50 U7S, Stainless Steel. Approximate 30" diameter x 12" straight side. Removable dish top. Internal rated full vacuum. Jacket rated 100 psi at 338 degrees F. Top mounted anchor style agitator with motor drive. Off center Ross HSM 510 emulsifier with 10hp drive, off center turbine style agitator with 1hp drive motor. Mounted on legs. National Board# 9937, Serial# 34960-5-2, built 2004.

Stock# 50907001

Used- Lee Industries Kettle, Model 75U5S, 75 Gallon, Stainless Steel. Approximate 32" diameter x 32" straight side, flat bottom. Jacket rated 100 psi at -20 to 338 degrees F. Top center entering bar style agitator, driven by a 2 hp, 3/60/230/460 volt, 1660 rpm motor. Bolt-on agitator bridge with (2) 1/3 covers. 2.5" Sanitary center discharge. Mounted on (3) legs. Serial# 70959-2, National Board# 12341, Built 2011.

Stock# 48125055

Used-300 liter HM Rustfri kettle, stainless steel construction, jacketed for 2.7 bar(39 psi at 150 c, top entering .75 kw Ekato agitator, model FGL-25D, on 2 legs, serial# FS-1210A, built 2011.

Stock# 48125056

Used-300 liter HM Rustfri kettle, stainless steel construction, jacketed for 2.7 bar(39 psi at 150 c, top entering .75 kw Ekato agitator, model FGL-25D, on 2 legs, serial# FS-1210B, built 2011.

Stock# 49567048

Used- Groen Kettle, 80 Gallon, Model N-80, Stainless Steel. Approximate 32" diameter x 28" deep, jacketed hemispherical bottom rated 125 psi at 353 degrees F. Open top with cover, approximate 2" center bottom outlet. Mounted on 4 carbon steel legs. Serial# & National Board# 112607, built 1982.

Stock# 51190003

Used- Feldmeier 90 Gallon Jacketed Tank, Stainless Steel, Vertical. Approximate 29.6'' diameter X 24'' straight side x 14'' cone to 15'' dish bottom. Dual zone jacketed 100 PSI at 200 degrees F. Stainless steel hinged top cover with (2) 2'' tri-clamp fittings, (1) 2'' opening slot for portable agitator, (2) half moon eiltering screens, (1) fixed 1/4'' perforations-3 per inch, (1) removable 1/16'' perforations - 4 per inch. 6'' Diameter center bottom outlet with tri-clamp sanitary ball valve, 15.6'' discharge height. Mounted on (4) legs. Serial# 505899, National Board# 1629, Built 1999.

Stock# 11059148

Used- Lee Industries Double Motion Jacketed Mix Kettle, 100 Gallon, Model 100U9MS. Approximate 30" diameter x 32-3/4" straight side. Internal rated 30 PSI at 250 degrees F. Jacket rated 100 PSI at 338 degrees F. Double motion scraper agitation. 316 Stainless steel mirror polished. 4" Center bottom outlet. Last used in sanitary application.

Stock# 50093006

Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon, Stainless Steel, Vertical. Approximate 40" diameter x 30" deep, hemispherical bottom. 3/4 Bottom jacket rated 90 psi at -20 to 320 degrees F. Top entering anchor style agitator with scraper, does not have a motor or gearbox, but can use a 1.5HP, 3/60/230/460 volt, 1740 rpm, 56:89 - 1.7 ratio. Top entering offset high shear agitator, does not have a motor or gearbox, but can use a 3/2HP, 3/50/60/230/460/190/380 volt, 3460/2900 rpm motor. Adjustable baffle. 2" Center bottom outlet with air actuated valve. National Board# 050, Serial# F 3316-2, Built 2000.

Stock# 50093008

Used- Hamilton Twin Agitated Kettle, Model SA 100, 100 Gallon, Stainless Steel, Vertical. Approximate 40" diameter x 30" deep, hemispherical bottom. 3/4 Bottom jacket rated 90 psi at -20 to 320 degrees F. Top entering anchor style agitator with scraper, driven by a 1.5 hp 3/60/230/460 volt, 1740 rpm, 56:89 - 1.7 ratio. Top entering offset high shear agitator, driven by a 3/2 hp, 3/50/60/230/460/190/380 volt, 3460/2900 rpm motor. 2" Center bottom outlet with air actuated valve. National Board # 052, Serial # F 3316-4. Built 2000.

Stock# 51191001

Unused - Lee Model 115 D9MT Vacuum Jacketed S/S Kettle with Double Motion Agitation. This kettle features 316 stainless steel 115 gallon capacity, designed for full vacuum internal, MAWP Jacket 40 PSI at 287 degrees F, MWWP Internal 15 PSI at 250 degrees F. Kettle complete with side scrap counter rotating agitator and hydraulic lift to lift cover and agitator. Included Mocon recirculating water heater. Kettle mounted on portable stainless platform. Purchased in 2009 and never used in production.

Stock# 51123004

Used- 135 Gallon Mondini Commercial Kettle Cooker, Model VS/A. 135 Gallon (500 Liter). Oil heated with perforated jacket-hinged lid. Heavy 12" wide dual-blade Agitator with 2" bottom drain.

Stock# 50822001

Used- Groen Kettle, 150 Gallon, Model N-150, Stainless Steel. Jacket rated 25 psi at 300 degree F. Twin acting scrape and paddle agitators, new motors, Year 1967.

Stock# 51230001

Used-RAS Process Equipment Approximately 150 Gallon Stainless Steel Jacketed Pressurized Agitated Cone Bottom Kettle; Interior pressure rated 50 PSI at 250F & jacket pressure rated 100PSI at 250F.Equipped with mixer with electrical specifications 1/3 HP, 208-220/460 Volt and motor specifications 3 phase, 60 cycle and Inverter 155 Volt.

Stock# 50395003

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 2 hp, 3/60/208-230/460 volt, 1750 rpm gear motor, approximate 44.32 to 1 ratio (no gearbox tag). Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 172, Serial # F-4662-3, Built 2002.

Stock# 50395004

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers (missing 1 scraper), driven by a 3 hp, 3/60/208-230/460 volt, 1750 rpm gear motor, approximate 44.32 to 1 ratio (no gearbox tag). Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 278, Serial # F-5817-2, Built 2004.

Stock# 50395005

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers (missing 2 scraper), driven by a 2 hp, 3/60/208-230/460 volt, 1750 rpm gear motor, approximate 44.32 to 1 ratio. Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 279, Serial # F-5817-3, Built 2004.

Stock# 50395006

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers (missing 1 scraper), driven by a 2 hp, 3/60/208-230/460 volt, 1720 rpm gear motor, approximate 44.32 to 1 ratio. Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 277, Serial # F-5817-1, Built 2004.

Stock# 50395008

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 338 degrees F. Top entering angled anchor style agitator with scrapers (missing 3 scraper), driven by an approximate 3 hp, 3/60/208-230/460 volt, 1745 rpm gear motor(motor not installed), approximate 44.32 to 1 ratio. Motorized agitator tilt, motorized bowl tilt (requires motor), pouring lip. 3" Center bottom outlet with incomplete valve assembly. Mounted on a stainless steel frame with (3) leg. National Board # 335, Serial # F-6667-1, Built 2005.

Stock# 50399003

Lee Industries Kettle,150 Gallon, Model 150DN/INA/2SP, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by an approximate 7.5 hp, 3/60/208-230/460 volt, 1725 rpm gear motor, 56.55 to 1 ratio (No motor tag). Air operated agitator tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 11031, Serial # 49119-1-2,

Stock# 50399006

Used- Lee Industries Kettle,150 Gallon, Model 150DN/INA/2SP, 316 Stainless Steel. Approximate 48" diameter, 48" deep, open top no cover, hemispherical bottom. 304 Stainless steel hemispherical bottom jacket rated 90 psi at -20 to 332 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 7.5 hp, 3/60/208-230/460 volt, 1725 rpm gear motor, 56.55 to 1 ratio. Air operated agitator tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 11030, Serial # 49119-1-1, Built 2007.

Stock# 50757003

Used- Hamilton Dual Agitated Kettle, 175 Gallon, Style DC, 316 Stainless Steel, Vertical. 48" Diameter x approximately 32" deep, air operated hinged clamp down dished top. 304 Stainless steel jacketed hemispherical bottom, rated 90 psi at 320 degrees F. Anchor style agitator with side and bottom scrapers, driven by a 3 hp, 3/60/230/460 volt variable speed motor. Off center agitator with (5) sets of 2 blades, driven by an approximate 3 hp gearmotor, ratio 57.6 to 1. Approximate 2" center bottom outlet. Mounted on 3 stainless steel legs. Serial# D-750-1, Certified by Brighton, National Board# 6050, Built 1988.

Stock# 50968001

Used- JC Pardo & Sons Kettle, 300 Gallon, Stainless Steel. Vertical. ASME code constructed bowl measures 55" diameter x 44" deep. Hemispherical bottom with 4" diameter center bottom outlet. Jacket rated for 90 PSI at 331 degree / -20 degree F. Top entering dual agitation. Scraper blade driven by approximately 10 hp motor through heavy duty gearbox. Also includes vertical tapered auger, 12" at top to 6" at bottom, driven by 5 hp 3/60/230-460V, 1680 rpm motor through gearbox, 136 output rpm. Frame Mounted. National Board # 2864, Serial # 7818. Built 1999.

Stock# 11059226

Used- Lee 400 Gallon Jacketed Vacuum Rated Mix Kettle with Scrape Agitation. Model 400D7S. Sanitary Vessel Rated for Full Vacuum. Jacket Rated 90 PSI at 332 Degree F. Agitator is 3/2 HP, 230/460-190/380 Volt, 1760/1460 rpm into gear box with 18:1 ratio. National Board # 6444. Kettle is 13' OAH x 5'3" OD at the jacket. 3" CBO.

Stock# 44298011

Used- Lee Industries 400 Gallon Mix Kettle, Model 400U, 316 Stainless Steel, Vertical. Approximate 46" diameter x 60" straight side. 304 stainless steel uniflow coil jacket rated 100 psi at -20 to 338 degrees F. Includes Lightnin agitator, 20 hp, 3/60/230/460 volt, 1755 rpm motor with shearing blade. Mounted on (3) legs. National board# 4724, Serial #B-4879-B, Built 1990.

Stock# 51299001

Used-Chester Jensen Dual Motion Cooker-Cooler, Model 70N100, 316 Stainless Steel, 1,000 Gallon Full Working Capacity, Vertical. Approximate 84" diameter x 43" straight side, flat top, 52" cone bottom. Top 1/3 hinged covers. Fixed stainless steel agitator bridge with double motion agitation, (1) bottom sweep blade with scrapers, driven by a 5hp, 3/60/230/460 volt motor. (1) Center agitator with (3) tri-blades, driven by a 5hp, 3/60/230/460 volt motor. Openings top: (7) 2", (2) 3", 3". Approximate 5" Center Bottom Outlet. Mounted on (4) legs. Built 2004. Jacket not operational.