Used Cannabis and Hemp Drying Equipment

Stock# 52675001

Used-IEC Thermo High-Efficiency Multi-Phase Hemp Dryer, Model 3000S. 3000 pounds/hour Wet Hemp Feed-In Capacity at 70% Moisture Level. 88 Gallons/Hour LP and 8,000 Cubic Feet/Hour Natural Gas. Metered Feed-in Conveyor/Hopper, Feed-out Auger, and Connecting Conveyors. Continuous Feed, 2-3-Minute Drying Time, Protection of your Cultivars with Low Temperature Operations, Biomass Reaching no more than 130-140 Degrees F.

Stock# 52858001

Used- Large Capacity Commercial Food / Hemp/ Agricultural Belt Style Continuous Dryer; dryer body measures 8 feet wide by 8 feet tall by 40 feet long with additional loading conveyor belt 8 feet wide by 17 feet; UL approved electrical circuits, heater and heater controls; software is US written and supported; 480 three phase power; 24 hour run cycles; multipurpose quick change burners; Variable temperature burners to 50,000 BTUs; max dry at 180 degrees; Drying cycles with propane or can be changed to natural gas; has been modified to dry at substantially slower speeds to increase yield and limited diminishing effects of Turpines and other desirable nutrients from hemp or other plants.. Built new in 2020. Like new condition with only 40 hours of set up and run time. As of listing, expert set up and dial in time available, can assist in shipping .. make offer.

Stock# 53455001

Used- Guoxin Hemp Drying Line, Model GX2-12-4. 72 sq M (775 sq feet) drying area; 180-450kg (approximately 400-1000 lbs.) wet biomass input capacity; 40-100kg (approximately 90-220 lbs.) dried biomass output capacity; 50-200mm (2-8") spread thickness of material; 0-120 degrees C (32-248 degrees F) working temperature; 0.1-5 hour drying time; 4.7 x 1.5 x 3m heat exchange furnace; OAD: 24 L x 6.5 W x 2.8 H meters (79' x 21' x 9'). Line components include: Feeding conveyor; Drying room; Burner; Blower; Heat exchanger; Exhaust fan; Discharge conveyor.

Stock# 53455002

Used- Guoxin Hemp Drying Line, Model GX2-12-4. 72 sq M (775 sq feet) drying area; 180-450kg (approximately 400-1000 lbs.) wet biomass input capacity; 40-100kg (approximately 90-220 lbs.) dried biomass output capacity; 50-200mm (2-8") spread thickness of material; 0-120 degrees C (32-248 degrees F) working temperature; 0.1-5 hour drying time; 4.7 x 1.5 x 3m heat exchange furnace; OAD: 24 L x 6.5 W x 2.8 H meters (79' x 21' x 9'). Line components include: Feeding conveyor; Drying room; Burner; Blower; Heat exchanger; Exhaust fan; Discharge conveyor.

Stock# 45134005

Used- GEA Barr Rosin Flash Dryer System. Consisting of: Comenco burner Model DH-450-30-0-XFO, rated 30 million BTU natural gas spent flake burner with drying Loop, Serial # 91285, (1) GEA Barr-Rosin screw conveyor, approximately 10" x 10' long, stainless steel spent flake dryer discharge screw conveyor with 15 hp drive, (1) GEA mixer/ dryer pugmill, approximately 36" x 16" long, stainless steel spent flake paddle mixer, 50 hp drive, surge hopper, fiber dryer, Gardner Denver blower, Duroflo 25 vacuum blower, MAC silencer and (4) stainless steel leg frame, blower, 500 hp flake dryer exhaust fan.

Stock# 44635033

Used- Munters Cargocaire Integrated Dehumidification System, Model IDS-B7-0. With 3hp blower, steam heated pre heater and main heater, humidification, HEPA housing, 460 volt. Job # 658607. Serial # 892. Built 2002.