hit counter

Your Files Are Being Processed

70% Complete

Please Wait

Tell Us What Process Equipment You Have For Sale SELL YOUR EQUIPMENT
2022 is The Best Year Ever for Section 179 LEARN MORE HERE

Used Rotary Hot Air Dryers

Below is Aaron's inventory of unused and used rotary hot air dryers. If you are looking to sell your used rotary hot air dryer submit a request online or contact Erik Eichert at 630-238-7480.

5 Rotary Hot Air Dryers

Enter to Search

Unused- Bepex Hammer Mill, Dryer and Cooler System

Stock# 52099001

Unused- Bepex Hammer Mill, Dryer and Cooler System. Consisting of: (1) Bepex RP disintegrator angled hammermill, model RP-12, 304SS, driven by a 30kW (40hp), 1800rpm motor, 3/60/600 volt. (1) Bepex Solidaire dryer, model SJS 42-22, 304SS, jacketed cylindrical body, rated 3.4 bar (49 psi) at 288 degrees C (550 F), rotor with (4) more info...

Used- MEC 13' x 60' Triple Pass Rotary Drum Dryer

Stock# 50335001

Used- MEC 13' x 60' Triple Pass Rotary Drum Dryer. Includes 40MM BTU McConnell dust burner with back up oil burner, controls, receiving cyclone and multi clones, main fan with motor, discharge stack and all related ducting and steel structure. Electric: 3/60/575V. Previous use wood shavings and sawdust.

Used- Andritz Rotary Drum Dryer

Stock# 50433001

Used- Andritz Rotary Drum Dryer, Carbon Steel. 7'5" diameter x 24'2" overall length. Furnace length: 163". Belt Drive. Natural Gas Year 2000.

Used-Louisville Co-Current Direct Heat Continuous Rotary Dryer

Stock# 52282001

Used-Louisville Co-Current Direct Heat Continuous Rotary Dryer, 96" diameter x 40 long. Carbon steel shell cylinder ?" thick, carbon steel spiral and veiling flights, "live shaft" type trunnions, chain and sprocket drive components, carbon steel feed throat housing with a gravity chute type feed, flanged carbon steel discharge h more info...

Used- Vulcan Stainless Steel Rotary Drum Dryer

Stock# 50761001

Used- Vulcan Stainless Steel Rotary Drum Dryer. 5'6" x 14' Stainless Steel Drum. 2.5mm BTU Eclipse Burner with Honeywell Digital Controls, Siemens 480V Burner Management. Maxon Natural Gas Regulator and Stainless Steel Exhaust System and Blower. Indirect fired. On a Stainless Steel Frame. Approximately 6' x 15'. Last running Ci more info...

Unused- Bepex Hammer Mill, Dryer and Cooler System

Unused- Bepex Hammer Mill, Dryer and Cooler System

Stock# 52099001

Unused- Bepex Hammer Mill, Dryer and Cooler System. Consisting of: (1) Bepex RP disintegrator angled hammermill, model RP-12, 304SS, driven by a 30kW (40hp), 1800rpm motor, 3/60/600 volt. (1) Bepex Solidaire dryer, model SJS 42-22, 304SS, jacketed cylindrical body, rated 3.4 bar (49 psi) at 288 degrees C (550 F), rotor with (4) rows of manually adjustable conveying paddles, driven by 56kW (75hp), 3/60/600 volt motor. (1) Bepex Solidaire cooler, model SJS 16-10, 304SS, jacketed cylindrical body, rated 3.4 bar (49 psi) at -7 to 100 degrees C (19.4-212 F),rotor with (2) rows of manually adjustable conveying paddles, driven by 3.7kW (5hp), 3/60/600 volt motor. (1) Volumetric feeder, designed to feed 130 kg/m3 at 313 kg/hr. (1) Discharge rotary valve. (1) Bin vent filter, approximate 1.2m diameter x 2.3m tall with jacketed housing, rated for 3.4 bar (49 psi) at 288 degrees C (550 F), 15 cm Nomex filter bags. (1) Condenser, 304SS, U-tube design, shell side rated 10.3 bar / FV at 93 degrees C (199 F), tube side rated 10.3 bar (149 psi) at 93 degrees C (199 F). (1) Recycle gas blower, 304SS, driven by 2.3kW (3hp), 3/60/600 volt motor. (1) Recycle electric gas heater, design rated for 6 kW loading. (1) Natural gas fired Hot oil heater, gas fired burner. (1) Chiller, air cooled, 3/60/600 volt. (1) Wet scrubber, 304SS. Control panel with A/B controllogix PLC, 15" touch screen HMI.

Dia (in): Len (in): Material: HeatSource:
VIEW ITEM ADD TO CART

Used- MEC 13' x 60' Triple Pass Rotary Drum Dryer

Used- MEC 13' x 60' Triple Pass Rotary Drum Dryer

Stock# 50335001

Used- MEC 13' x 60' Triple Pass Rotary Drum Dryer. Includes 40MM BTU McConnell dust burner with back up oil burner, controls, receiving cyclone and multi clones, main fan with motor, discharge stack and all related ducting and steel structure. Electric: 3/60/575V. Previous use wood shavings and sawdust.

Dia (in): 156 Len (in): Material: Stainless Steel HeatSource:
VIEW ITEM ADD TO CART

Used- Andritz Rotary Drum Dryer

Used- Andritz Rotary Drum Dryer

Stock# 50433001

Used- Andritz Rotary Drum Dryer, Carbon Steel. 7'5" diameter x 24'2" overall length. Furnace length: 163". Belt Drive. Natural Gas Year 2000.

Dia (in): 89 Len (in): 163 Material: Stainless Steel HeatSource: Natural Gas
VIEW ITEM ADD TO CART

Used-Louisville Co-Current Direct Heat Continuous Rotary Dryer

Used-Louisville Co-Current Direct Heat Continuous Rotary Dryer

Stock# 52282001

Used-Louisville Co-Current Direct Heat Continuous Rotary Dryer, 96" diameter x 40 long. Carbon steel shell cylinder ?" thick, carbon steel spiral and veiling flights, "live shaft" type trunnions, chain and sprocket drive components, carbon steel feed throat housing with a gravity chute type feed, flanged carbon steel discharge housing. Combustion System: 20 MMBTU/HR burner capable of operating on natural gas or #2 fuel oil, with air/fuel ratio controller, combustion air fan, burner management control panel. Burner mounted on a carbon steel combustion chamber which will includes a factory installed ceramic fiber blanket liner complete with an air tempering fan for inlet air temperature control. Process Conditions for Hemp: 10,000 lbs/hr feed rate, 50 degrees F feed temperature, 75% feed moisture, 11% product moisture, 2,809 lbs/hr product rate, 26,952 ACFM at 200 degrees F exhaust volume, 12.4 MMBTU/hr heat required. Mfg. 2020.

Dia (in): 96 Len (in): 480 Material: CS HeatSource: Direct
VIEW ITEM ADD TO CART

Used- Vulcan Stainless Steel Rotary Drum Dryer

Used- Vulcan Stainless Steel Rotary Drum Dryer

Stock# 50761001

Used- Vulcan Stainless Steel Rotary Drum Dryer. 5'6" x 14' Stainless Steel Drum. 2.5mm BTU Eclipse Burner with Honeywell Digital Controls, Siemens 480V Burner Management. Maxon Natural Gas Regulator and Stainless Steel Exhaust System and Blower. Indirect fired. On a Stainless Steel Frame. Approximately 6' x 15'. Last running Citrus Peels.

Dia (in): Vulcan Len (in): Material: HeatSource:
VIEW ITEM ADD TO CART
  • Unused- Bepex Hammer Mill, Dryer and Cooler System

    Unused- Bepex Hammer Mill, Dryer and Cooler System. Consisting of: (1) Bepex RP disintegrator angled hammermill, model RP-12, 304SS, driven by a 30kW (40hp), 1800rpm motor, 3/60/600 volt. (1) Bepex Solidaire dryer, model SJS 42-22, 304SS, jacketed cylindrical body, rated 3.4 bar (49 psi) at 288 degrees C (550 F), rotor with (4) rows of manually adjustable conveying paddles, driven by 56kW (75hp), 3/60/600 volt motor. (1) Bepex Solidaire cooler, model SJS 16-10, 304SS, jacketed cylindrical body, rated 3.4 bar (49 psi) at -7 to 100 degrees C (19.4-212 F),rotor with (2) rows of manually adjustable conveying paddles, driven by 3.7kW (5hp), 3/60/600 volt motor. (1) Volumetric feeder, designed to feed 130 kg/m3 at 313 kg/hr. (1) Discharge rotary valve. (1) Bin vent filter, approximate 1.2m diameter x 2.3m tall with jacketed housing, rated for 3.4 bar (49 psi) at 288 degrees C (550 F), 15 cm Nomex filter bags. (1) Condenser, 304SS, U-tube design, shell side rated 10.3 bar / FV at 93 degrees C (199 F), tube side rated 10.3 bar (149 psi) at 93 degrees C (199 F). (1) Recycle gas blower, 304SS, driven by 2.3kW (3hp), 3/60/600 volt motor. (1) Recycle electric gas heater, design rated for 6 kW loading. (1) Natural gas fired Hot oil heater, gas fired burner. (1) Chiller, air cooled, 3/60/600 volt. (1) Wet scrubber, 304SS. Control panel with A/B controllogix PLC, 15" touch screen HMI.

    VIEW ITEM
  • Used- MEC 13' x 60' Triple Pass Rotary Drum Dryer

    Used- MEC 13' x 60' Triple Pass Rotary Drum Dryer. Includes 40MM BTU McConnell dust burner with back up oil burner, controls, receiving cyclone and multi clones, main fan with motor, discharge stack and all related ducting and steel structure. Electric: 3/60/575V. Previous use wood shavings and sawdust.

    VIEW ITEM
  • Used- Andritz Rotary Drum Dryer

    Used- Andritz Rotary Drum Dryer, Carbon Steel. 7'5" diameter x 24'2" overall length. Furnace length: 163". Belt Drive. Natural Gas Year 2000.

    VIEW ITEM
  • Used-Louisville Co-Current Direct Heat Continuous Rotary Dryer

    Used-Louisville Co-Current Direct Heat Continuous Rotary Dryer, 96" diameter x 40 long. Carbon steel shell cylinder ?" thick, carbon steel spiral and veiling flights, "live shaft" type trunnions, chain and sprocket drive components, carbon steel feed throat housing with a gravity chute type feed, flanged carbon steel discharge housing. Combustion System: 20 MMBTU/HR burner capable of operating on natural gas or #2 fuel oil, with air/fuel ratio controller, combustion air fan, burner management control panel. Burner mounted on a carbon steel combustion chamber which will includes a factory installed ceramic fiber blanket liner complete with an air tempering fan for inlet air temperature control. Process Conditions for Hemp: 10,000 lbs/hr feed rate, 50 degrees F feed temperature, 75% feed moisture, 11% product moisture, 2,809 lbs/hr product rate, 26,952 ACFM at 200 degrees F exhaust volume, 12.4 MMBTU/hr heat required. Mfg. 2020.

    VIEW ITEM
  • Used- Vulcan Stainless Steel Rotary Drum Dryer

    Used- Vulcan Stainless Steel Rotary Drum Dryer. 5'6" x 14' Stainless Steel Drum. 2.5mm BTU Eclipse Burner with Honeywell Digital Controls, Siemens 480V Burner Management. Maxon Natural Gas Regulator and Stainless Steel Exhaust System and Blower. Indirect fired. On a Stainless Steel Frame. Approximately 6' x 15'. Last running Citrus Peels.

    VIEW ITEM
Cash Icon
Surplus Equipment?

We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.

SELL YOUR EQUIPMENT
Search Icon
Browse Inventory

View our entire process equipment inventory online or visit our location for an equipment inspection.

View Inventory
Phone Icon
Contact Us

Email or call us to speak with an equipment specialist to answer any machinery questions you may have.

630-350-2200