Used Cannabis and Hemp Extraction Equipment

Stock# 50564003

Used Critical Solutions 40 Liter CO2 Extractor. Capacity: 15 lbs. of botanical material. Yield: Up to 1000g extract/run. Dimensions: 84" 32" 83". Last used in a Cannabis application.

Stock# 51083004

Used ExtraktLAB CO2 Extraction System. Model Extrakt 140 | Cannabis Equipment. Supercritical CO2 extraction machine. 5000 PSI, (2x) 20L extraction cylinders, (3) 304 stainless steel collection columns. Electrical: 208V-240V, 3 phase, 67 FLA. Footprint: 24 foot. Includes CO2 Recycler System: 5000 PSI, 20L capacity cylinder, fully integrated into extraction machine with automated control from HMI panel. Does not include the chiller. Last used in a Cannabis application.

Stock# 51231002

Unused- Capna Systems Complete Cannabis/Hemp Cryogenic Ethanol Extraction Line. System Components as follows. Includes (1) Atles Extractor: Fully automatic. Ability to process 30-40 pounds of plant material every 30 minutes. 20 x 10 x 9 of clear space is necessary for safe operation. 600L/165 gallon ethanol holding capacity. 85% solvent recovery rate. 3 components that draw power: Chiller 40 amp 480v 3ph circuit, Air compressor 20 amp 115v 1ph, Control panel 20 amp 240v 3ph. Includes Pump, Chiller, and control panel. Includes (2) ARES Falling Film Evaporators: Recovery Rate of 60L / hour to 90L / hour. Vacuum Pump: Welch 205B-01. 25 Gallon Collection Vessel included. Dimensions: Length 109'' x Height 91'' x Width 28''. Power: 3 PH 240V 43 amp + 1PH 120V 15 amp. Includes (1) CERES Decanter Centrifuge: 50L Capacity, 220V/60Hz/3Ph, 3Kw Motor,1500RPM. Includes (1) Huber 915 Chiller.

Stock# 51633001

Unused-Better Shanghai Industry Co. Winterization Machine; Approximate 600L/day Capacity. Used to refine the crude paste extracted by supercritical co2 extraction machine to get full spectrum crude oil; Includes: mixing, winterization, filter and ethanol recovery; Built 2019.

Stock# 51633002

Unused - Shanghai Better Industry Co., Model SCFE-300L(150L x2) Supercritical CO2 Machine with CO2 Recovery Pump; The Super Critical CO2 Herbal Extraction Machine is used for the extraction of material (solid or liquid) under high pressure and suitable temperature extraction.Changing conditions in the separation kettle, the dissolved substances will resolve in order to achieve the purpose of separation.Supercritical CO2 extraction equipment includes several parts: extraction kettle, separation kettle,mixer, CO2 high-pressure pump, co-solvent, refrigeration system, heat exchange system, CO2 storage tank, CO2 level gauge, purification system, flow meter, temperature control system, safety protection system etc. Built 2019.

Stock# 52056001

Used Subzero Scientific Ethanol Extraction System; 50L Solvent Tank 20L Material Vessel 50L Holding Tank Extract 15 lbs - 35lbs / batch; Cycle time: 1hr; Chiller: -50o F; Single Phase 110V 60 hz pump; Mfg. 2019.

Stock# 52279001

Used Eden Labs CO2 Extraction System; Model 20L 2000 PSI; Extraction Vessel : Volume: 20L vessel holds up to 10 pounds of dry, ground material; maximum pressure 2000 psi (137.895 bar); maximum temperature 200F (93C); Jacket volume 4.5 Liters (1.2 gallons) 316 Stainless Steel Construction; CO2 Recirculation Pump: Flow rate: .85 Gallons per minute; Air drive piston liquid pump; In line particulate filter; all wetted parts are 316 stainless steel; Separators: (2) Separators with product collection valve; Volume: 2.5 Liters per separator; Maximum pressure 1100 psi (62.05 bar); Temperature up to 200F (93C); 316 stainless steel; Liquid Gas Separator; Tube style Heat Exchangers, 304 stainless steel; Recirculating chiller/heater, Temperature range: 4.4C to 100C (40F to 212F); 304 Stainless Steel Frame 40" L x 48" W x 60" H; Compressed Air: Energy Efficient 5 HP screw drive Chicago Pneumatic; System Requirements: Extractor Electrical 115V AC, 60 hz, 15A; Chiller/Heater Electrical 220V AC, 1 phase, 60 hz, 20A; Heaters 220V 30A single phase. 115V Standard outlet; Liquid Co2; Air Compressor 5HP Screw drive Single phase or 3 phase available

Stock# 52351001

Unused Liaoyang Pharma Machinery 2x (150Lx2 ) Supercritical CO2 Extraction System, (2 Extractors, 3 Separators, CO2 Circulating type). System is workable for high pressure and suitable temperature extraction material (solid & liquid),changing condition to make the solvable material resolve the target product during extraction and separation. System includes: extraction reactor; separators; CO2 high pressure pumps; cooling system; heat exchanger system; CO2 storage tank; liquid level meters; purifying filter system; flow meter; temperature control system; security protection system; charging and loading system. Manufactured by Liaoyang Pharma Machinery. *Technical Data Upon Request*

Stock# 52533001

Unused -LPMIE CO2 Extraction Unit; Model SCFE-300L; Includes: extraction kettle, separate kettle, CO2 high pressure pump, entrainer pump, cooling system, CO2 basin, exergy transfer system, purification system, flowmeter, temperature control system, safety protection device; can be used for the extraction of the material at high pressure and suitable temperature (solid or fluid), modifying the separator conditions to analyze the dissolved substances to achieve the separation purpose.

Stock# 52636001

Unused Supercritical Co2 Fluid Extraction Machine; Maximum extraction pressure: 40MPa; Maximum separation pressure: 20Mpa; Extraction kettle volume: 150L x 2; Extraction temperature: normal temperature ~ 75 C; Maximum CO2 flow: 1000L / h adjustable; Includes the following: Refrigeration device; Temperature control display system; Pressure control display system; Safety protection device; Carrier tank; Purifier; Mixer; Heat exchange device; Storage tank; Plunger pump with a flow rate of 1000L/ h and 10L / h; Extraction tank; Separator; Electric control cabinet; Valve; Pipe fittings and cabinet rack. System is crated and ready for shipment.

Stock# 52636002

Unused- Supercritical Co2 Fluid Extraction Cannabis / THC Industrial Machine; Maximum extraction pressure: 40MPa; Maximum separation pressure: 20Mpa; Extraction kettle volume: 150L x 2; Extraction temperature: normal temperature ~ 75 C; Maximum CO2 flow: 1000L / h adjustable; Includes the following: Refrigeration device; Temperature control display system; Pressure control display system; Safety protection device; Carrier tank; Purifier; Mixer; Heat exchange device; Storage tank; Plunger pump with a flow rate of 1000L/ h and 10L / h; Extraction tank; Separator; Electric control cabinet; Valve; Pipe fittings and cabinet rack. System is crated and ready for shipment.

Stock# 52681001

Used 20lb Passive Closed Loop Extractor. Fully Operational. Includes: (1) - Stainless steel Rack on wheels. (2)- 8"x48" - Open Jacketed Columns with finished top caps and bottom filter plates/filter plate reducer. Has 1/4in and 3/8in fill valves on top. 3/8th on bottom. Gaskets/bolts/nuts. (1)- 4" CRC Filter kit- Max Height 36". Includes 4"x12", 4"x 24" spools, 1micron sintered disc filter plate, reducers etc. Gaskets/bolts/nuts. (1)- 12" x 36" boiling vessel with top and bottom caps. 1/4" discharge, 3/8" and 1/4" recovery/fill. (1) - 120lb butane fill tank (2) - 60 lb Butane recovery tanks non- jacketed, comes with 2 replacement valves, recommend installing before use. (3-4)- Various sized 1/4" lines. 2-6 (2) 3/8" lines 8 (2) Nitrogen tanks with 1 regulator. Various amount of B-20 filter media, Silica 60, Celite, T-41.Butane/Propane System

Stock# 52808001

Used Comerg Pure 5 Remediation System, Model 5L THC. Includes: 10 Liter Stainless Steel Processing Vessel; holds up to 5L of extract; Maximum temperature 125 degrees C; Compressed Air Compressor: 20 degrees C to 50 degrees C; PLC Controls; 680mm L x 470mm W x 370mm H; Approximately 100kg.

Stock# 52855001

Unused / New In Crates - Eden Labs LLC Industrial 500 Gallon Performance Solvent Recovery System. Ethanol Platform. Skidded system. Quick connect / disconnect fittings for ease of operation. Turnkey system with all utilities. No Winterizing necessary. In-line filtration, Recovers up to 100 gallons of ethanol per hour. All stainless steel. Still in original Crates. Consists of the following: (3) Eden Labs High Performance Solvent Recovery System. (500 gallon) to include: 500 gallon jacketed tank: includes lid, closures, seal ring, transfer pump, and heating system. 500 gallon Conical lid with Tri-clamp outlet, cone has 3 picking eyehooks. Tube in Shell External Condenser complete with connection to Conical Lid & Adaptors. Vacuum Pump and Manifold. Falling Film Accessory-Mixer air driven, sanitary, vacuum-rated for use with Eden Labs Solvent Recovery System. 84KW, air-cooled chiller with 460/3/60 power, casters, expansion tank, and remote control. 2 each 100 Gallon Vacuum Rated Jacketed Solvent Recovery Vessel. (3) High Performance Extraction System (100 gallon) to include: 100 gallon jacketed tank: includes lid, closures, seal ring, and transfer pump. 100 gallon still basket with tank, lid, gasket, basket crossbar for basket removal. Spray Ball for shower-mode extraction. Filtration system, includes Lenticular, Housing Sight Glasses, and Carbon Filters. Touch Science Chiller DLSB 50-80 Model cryo-capable. Top Mount Air Driven Mixer with Folding Impellers. (6) SST 100 Gallon Jacketed Tank. 12 Gallon shell with sanitary rim top 2 piece hinge cover with handle. Designed to heat or chill liquid at atmospheric pressure. CP Compressor, 30 hp. 3ph.Tri-Volt, 125 psi Base Mount Changed to 35 hp gear drive with 400 gallon. Remote tank complete with dryer, particulate and coalescing filter as well as installation components and gauges.

Stock# 53140016

Laboratory Hammer Mill Pulverizer, Stainless Steel. Approximate 7" diameter x 3" deep. 2 Hammer. Top adjustable air door device. Feed Pan. No manufacturers tag.

Stock# 53402001

Used Complete Extraction/Vape Pen Filling Line consisting of: Extrakt Labs 110+ Co2 Extractor; Extrakt Labs DrainDroyd vacuum filtration system; Extrakt Labs recommended Bio Mass Grinder 10L Rotovap; 710 Shark Vape Pen Filling Machine, v7.0. All tools and accessories included.

Stock# 53537001

Unused- Supercritical Fluid Technologies Propane-Butane Extraction System, Model SFT-150. Stainless steel construction; 5L vessel; 3L separator capacity; removable top and bottom. Additional components: Rupture disc for overpressure protection; Haskell MS-21 pump; Metering valve; Full recycle. Protective Labconco lab hood included. Built 2017.

Stock# 53631001

Used Pure Extraction Super/Sub-Critical CO2 Automated Extraction System. Capable of processing approximately 1 kg (2.2 lbs.) of cannabis per average 2 hour cycle; 5L vessel; 3000psi max. pressure; 10-50 degrees C (50-122 degrees F) operating temperature. OAD 72" x 33" x 60". 220V. Includes 25 gallon glycol chiller; 30 PSI max. pressure; -8-0 degrees C (17.6-32 degrees F) operating temperature. OAD: 55" x 24" x 65". 220V. Built 2018. Reported to be low hours. Cannabis Equipment / Machinery.

Stock# 53748001

Used Gloe Corporation Mobile Extraction System. Recovery rates of 2 gpm at only 160f and 25"hg (more heat + more vacuum = faster recovery) ability to recirculate to further concentrate crude. Can batch 100lbs of ground material or about 60lbs flower at a time. Easy production of oil; Easy scalability; No building required; Automated cryoethanol extraction system.120 gallon batch tank; 4 stage filtration/remediation system; 300gallon vacuum jacketed cold storage tank; 300 gallon hot water jacketed tincture tank; 4 - 70"by 10" 150 tube falling film evaporators (3,500+sqft of surface area!) automated and manifolded together; 300 gallon reclaim tank. Designed and built by experienced process food/beverage system builders; All stainless sanitary build out; Welded by certified welders and passivated after fabrication for safe consumption products. Utilities included: 1;000;000 BTU water heater system; 40t cooling tower; Becker27"hg vacuum pump; Sullair 185 scroll air compressor; mq 70kw whisper watt generator; Completer 20l rotary evaporator with vacuum pump and chiller

Stock# 53810001

Used HAL Extraction Booth, Classic Series Model 180U. 180 square foot interior; 500 CFM min. base air flow rate; 1500 CFM min. purge air flow rate; 18-gauge powder coated steel panels; 18-gauge powder coated steel, 90 minute fire rated door; UL listed Micro PLC control panel; (2) 12" XP fan; 9'8 max. height w/ fan. Interior Serial# 180U12190138. OAD: 18'9 L x 9'9 W x 8'2 H. Exterior OAD: 20'3 L x 10' W x 8'5 H. 1/208V. Built 2019.

Stock# 53935002

Used Colorado Extraction Systems (CES) Model, TripleXtract TX120.Fully automated ,closed loop, chilled ethanol extraction system; 120 pounds per hour processing speed; Up to 99% ETOH recovery; 92% Cannabinoid extraction efficiency; Five levels of filtration; Seamless integration with SprayVap for a superior closed-loop system. System includes reaction tank, residual solvent removal, (2) feed tanks, process tank, pumps, valves, filtration, and UL listed control panel with touchscreen.

Stock# 48996002

Unused- Alfa Laval Fermenter / Reactor, Approximate 40 Liter (10.5 Gallon), 316L Stainless Steel, Vertical. Approximate 12" diameter x 22" straight side, bolt-on flat top, dished bottom. Internal rated 45 PSI/FV at -20 to 400 degree F. 316L Stainless steel Jacket rated 150 psi/FV at -20 to 400 degree F. Bottom entering agitation 1/2hp drive, missing agitator. (1) Spray ball. Side lug mounted with load cells. National Board #264. Serial #786-100/17. Built 2004. Includes control panel with Wedgewood technology model 653 absorbance monitor, Mettler toledo Jag xtreme digital read out, (4) metering valves. All mounted on stainless steel frame.

Stock# 53830001

Used Apeks Supercritical CO2 Extraction System, Model 1500-20L. 20 liters extraction vessel capacity; 1,500 psi maximum pressure; Fully automated with a 12" LCD touch-screen interface; Closed-loop system with up to 95% CO2 recovery; Serial # 13161. Includes spare Haskel AGD-14 gas booster pump and an Ingersoll Rand SSR UP6-25-125 air compressor.

Stock# 53878001

Unused- Apeks "Transformer" Supercritical CO2 Extraction System, Model 2000 20LD. System rated up to 10lbs (4540 grams) per cycle. Processes approximately 25-31 pounds of raw material per day. 20L 304 stainless steel primary vessel; 2000 psi maximum pressure; 160 degrees F maximum temperature; Fully automated; Standard collection cups; Single vessel venting system kit; Allen Bradley controls. 3/60/460V. Includes Apeks PDC-4-2000 compressor (12.5 HP motor) and chiller. Built 2019

Stock# 53613001

Used Apeks Supercritical CO2 Extraction System, Model 200020LD. 20L primary vessel, 304 stainless steel; 2000 psi maximum pressure; 160 degrees F maximum temperature; Fully automated; Standard and large collection cups; Gas recovery option; Single vessel venting system kit. Allen Bradley controls. 1/60/230V. Includes Apeks PDC-4-2000 compressor (12.5 HP motor) and Thermo scientific ThermoFlex 5000 chiller. System rated up to 10lbs (4540 grams) per cycle. Processes approximately 25-31 pounds of raw material per day. Built 2015. Previously used for cannabis.

Stock# 53622001

Used Apeks High Output CO2 Extraction System, Model 5000 20LX20L2ST. System can process 140-200 pounds of dried biomass per day. Optimized for supercritical extraction, which means high pressure/high temperature extractions, the machine can also process sub-critically (low pressure/low temperature), which preserves terpenes and means less post-processing. Giving you the best of both worlds. The most versatile and highest-yielding system with the shortest extraction times, The Force system efficiently extract botanical oils without thermal degradation at industry-leading processing rates. These systems provide high production with a wide range of processing options for supercritical and subcritical extractions. Serial # 19705.

Stock# 53622002

Used Apeks Model 5000 20LX20L2ST High Output CO2 Extraction System. System can process 140-200 pounds of dried biomass per day. Optimized for supercritical extraction, which means high pressure/high temperature extractions, the machine can also process sub-critically (low pressure/low temperature), which preserves terpenes and means less post-processing. Giving you the best of both worlds. The most versatile and highest-yielding system with the shortest extraction times, The Force system efficiently extract botanical oils without thermal degradation at industry-leading processing rates. These systems provide high production with a wide range of processing options for supercritical and subcritical extractions. Serial # 19704.

Stock# 53342001

Used Apeks Supercritical Machine, specifically the 20x20 model, stands as a pioneering solution for botanical compound extraction through supercritical fluid technology. Manufactured by Apeks Supercritical, this machine seamlessly integrates precision engineering, safety features, and ability to deliver optimal performance across diverse applications. Can operate at Supercritical and Subcritical Pressures and Temperatures, 800-2000 PSI Operating Pressures, Thermo Fischer Chiller, Ability to process 25 lbs of plant material per day, Lights out Automation Capable, Operator safety, the machine incorporates built-in safety features, including pressure relief valves, emergency stop functions, and comprehensive monitoring systems. These features ensure a secure operating environment and compliance with industry safety standards. Excellent Terpene Separation Machine, The machine incorporates data logging and reporting functionalities, enabling operators to track and analyze extraction parameters over time. This feature supports quality control, process optimization, and regulatory compliance

Stock# 53080001

Used Eden Hi-Flo-5000 CO2 Extraction System. Includes: Neslab Model CFT-150 Chiller/ Water Heaters with submersible pumps. Backup CO2 pump (maximator). Chicago Pneumatic 5HP Rotary Screw Air compressor. (2) New FAC nuts for Extractor vessel. CO2 cylinder, scales, CO2 monitor system and all hoses.

Stock# 52422001

Used Eden Labs CO2 Extractor; Model FX2 20L 5K; capable of processing up to 107 lbs/day of Biomass, up to 5,000 psi; Includes Chicago Pneumatic QRS10 Rotary Screw Air Compressor, 125 HP, 132 Gallon Tank Mounted, 40 ACFM @125 psi and MTA TAEevo Tech Air Cooled Chiller.

Stock# 53404001

Used ExtraktLab SupercrititcalCO2 Model E140 Extraction System. Biomass Processing per Day: 192 kg / 422 pounds. Biomass Input per Cycle: 5-8kg. Cycle Time at 10% PP: 60 minutes. Efficiency Oil Recovery: Hemp 90+% and Marijuana 95+%. Operating Pressure: 0 to 5000 psi. Operating Temperature: 25 to 100 Degrees C. CO2 Supply: 750-850 psi inlet. Includes: (2) 20L extraction cylinders; (3) 304 stainless steel collection columns. 24sq ft. footprint. Controlled by Touch Screen HMI Panel. Electrical Requirements: 208-240 VAC, 3 Phase, 50-60 HZ. Includes optional upgrades: CO2 Recycler System - Liquid CO2 recycler system, 5000psi, 20L capacity cylinder, fully integrated into extraction machine with automated control from the HMI panel; Onboard Ethanol Pump - Fully integrated ethanol pump for cleaning internal extractor components and co-solvent applications, 5000psi, automated control from HMI panel

Stock# 53404002

Used ExtraktLab E140, SupercrititcalCO2 Extraction System. Biomass Processing per Day: 192 kg / 422 pounds. Biomass Input per Cycle: 5-8kg. Cycle Time at 10% PP: 60 minutes. Efficiency Oil Recovery: Hemp 90+% and Marijuana 95+%. Operating Pressure: 0 to 5000 psi. Operating Temperature: 25 to 100 Degrees C. CO2 Supply: 750-850 psi inlet. Includes: (2) 20L extraction cylinders; (3) 304 stainless steel collection columns. 24sq ft. footprint. Controlled by Touch Screen HMI Panel. Electrical Requirements: 208-240 VAC, 3 Phase, 50-60 HZ. Includes optional upgrades: CO2 Recycler System - Liquid CO2 recycler system, 5000psi, 20L capacity cylinder, fully integrated into extraction machine with automated control from the HMI panel; Onboard Ethanol Pump - Fully integrated ethanol pump for cleaning internal extractor components and co-solvent applications, 5000psi, automated control from HMI panel. Includes PolyScience DuraChill Chiller. 5HP; 17,935W / 61,200 BTU/Hr @35 Celcius cooling capacity. 3/60/230V.

Stock# 53811001

Used MRX Xtractor, model FIYRR-XTR 20L, Supercritical, close loop, fluid/CO2/botanical extraction system. Run time dependent on biomass quarator vessels, with NBN - 1325, 1322, 1324 ( 2015) 230-460v, 50/60hz. Control panel with AB PanelView Hmi and Compact Logix ethernet module. Festo pneumatic valve control bank, maximator pneumatic part. Haskel refrigerant recovery pump, associated valves on tubular stainless frame. ntity, 1800psi, dual phase pump ( liquid ad gas), with JV Northwest Inc, stainless extraction, accumulation and separator vessels, with NBN - 1325, 1322, 1324 ( 2015) 230-460v, 50/60hz, control panel with AB PanelView Hmi and Compact Logix ethernet module, Festo pneumatic valve control bank, maximator pneumatic part, Haskel refrigerant recovery pump, associated valves on tubular stainless frame.

Stock# 53281001

Unused- Nanjing Kingreat Top Discharge Centrifuge, Model BB-150. 1200 RPM max speed. 150 lbs. max basket cap. Approximate 76"(1920mm) x 58" (1460mm) x 63" (1580mm). 11 kw (14.75hp). Built 2019.

Stock# 53396001

Used Pope Scientific 6" Stainless Steel Cannabinoid Distillation System. System consists of: 6" molecular still complete with variable speed drive mechanism; self-supporting still stand; SS still body; SS internal condenser 6L glass graduated feed and degasser flask w/ stopper; 5L glass distillate receiver flask; 5L glass residue receiver flask; glass cold trap; 316 SS wiper retainer; Teflon wiper blades; all necessary glass to SS adapters. Includes: Metal band heater set for 6" SS still body w/ high temperature cordset ceramic insulators; J" thermocouple and insulating jacket installed for temperatures up to 707 degrees F (375 degrees C) 50/240V; digital temperature controller with automatic tuning of proportional band; integral time and derivative time parameters, setpoint. and process displays; 500 ml receiver flask for smaller batches; 1000 ml receiver flask; (2) 2L receiver flask; (2) five liter receiver flask; external condenser with 24/25 stopper for 6" still; (4) heat controller for noncritical feed/degasser. 50/60/120V. Built 2019.

Stock# 53905001

Used Precision Extraction Solutions Extraction System, Model X10 MSE. 5-10 lbs./hour capacity; 40-60 minute cycle time; 32.5 lbs. solvent capacity; 250 PSIG MAWP. With MVP 6 CFM, 60 PSI, 12 GPH recovery pump. Extraction skid OAD: 44" L x 46" W x 69" H. Built 2021. Previously used for butane extraction of cannabis.

Stock# 53467001

Used Vitalis Q45 Supercritical CO2 Extraction Unit complete with chiller. Total of 1647 hrs since new (2021). Unit has dual high-efficiency heat exchangers and can be increased to 90L with extension pack. Pressure rating is 500 - 4800 psi, 100L accumulator, 45L extraction chamber, temperature range 35-155*F. Dual extraction chambers, dual separation lines, clog-free operation, and quick-closure clamps on pressure vessels. Control panel offers multiple user levels, real-time monitoring, system logging for GMP-compliance, Independent vessel control, Cloud/Wi-Fi/ethernet and live batch recording. Liquid CO2 pump, positive displacement with a maximum flow rate of 8kg/min @ 2000 psi. 2 cyclonic separators, 2 secondary separators, 10 micron secondary separation filter, separation temperature range 40-100*F, and terpene profile retention. Footprint of unit is 164" x 54" x 115". 3/60/460 Volt.

Stock# 53102001

Used Vitalis Extraction Technology Model R200 CO2 Extraction System. 2x100L extraction vessels, accumulator skid, Hydraulic power unit, HMI control panel, R200 catwalk. Refrigeration condenser is not included. Working Condition.

Stock# 53102002

Used Vitalis Extraction Technology Model Q90 CO2 Extraction System. 2x45L extraction vessels, accumulator skid, Hydraulic power unit, HMI control panel. Refrigeration condenser is not included. Working Condition.

Stock# 53102003

Used Vitalis Model Q90 CO2 Extraction System, Stainless Steel. 2x45L extraction vessels, accumulator skid, Hydraulic power unit, HMI (analog) control panel. Refrigeration condenser is not included. Working Condition.