Used Pebble Mills

Stock# 48076001

Used- Patterson Ball Mill, Model 65-4023. 4' inside diameter x 5' inside length. 3/4" to 1" aluminum oxide balls, 10 hp drive, new ring gear and drive motor. Mounts on stands.

Stock# 48789001

Used- Paul O. Abbe Ball Mill, Model 6PM (CLM 94), Brick Lined. Approximate 29" diameter x 32" straight side. Approximate 12.5 Cubic Foot Capacity (94 Gallon). Approximate 9-1/2" x 8" charge/discharge with cover. Driven by a 5 hp, 3/60/208-230/460 volt, 1750 rpm thru Flak reducer, 24.99:1 ratio. Mounted on carbon steel stands. Includes a starter panel and Teco MA7200 drive. Serial# A37655.

Stock# 69333

Used- Paul O Abbe Pebble Mill, Model 5AS. 316 Stainless steel (product contact). 36" Diameter x 60" straight side, 30 cubic foot total capacity, 7.5 working, alumina ceramic lined, rated 14.7 psi/fv at 26.7 deg C (80 deg F), jacket rated 14.7 psi at 26.7 deg C (80 deg F), stainless steel skin and dual drum lifting mechanism, side-by-side 18" diameter charge ports with covers. Mounted on stainless steel legs with rotary unions. Main drive 7.5 hp, brake drive 5 hp. Includes control panel and guards.

Stock# 46574001

Used- Patterson Industries Pebble Mill, Carbon Steel. Approximately 48" diameter x 48" long mill, ceramic lined, internal 43" diameter x 43" long, chamber. Approximate 35 cubic feet, 260 gallon capacity. 15" x 10" charge/discharge opening with cover. Driven by 20 HP, 3/60/220-440 Volt, 1800 RPM gear motor, 17.58 to 1 ratio. Includes electrical panel, guards. Mounted on 37" tall stands. Serial# 721639.

Stock# 49634001

Used- Paul O. Abbe Pebble Mill, Model 4B PM, Carbon Steel. Ceramic brick lined chamber internal approximate 44" diameter x 55" long. Approximate 12" x 15" charge & discharge port with cover. Driven by a 10hp, 3/60/230/460 volt, 1740 rpm XP motor with a shaft mounted reducer, ratio 25.42 to 1, approximate 22 rpm drum speed. Mill mounts on approximate 84" tall legs. Serial# A45293, built 1994.

Stock# 41618008

Used- Paul O Abbe Ball Mill, brick lined. Approximately 57" diameter x 57" long. Approximate 84 cubic feet, 630 gallon capacity. 13" x 15" charge/discharge with cover. Driven by a 15 hp, 3/60/220-440/460 volt, 875 rpm motor. Mounts on carbon steel stands.

Stock# 10288032

Used-Patterson 5' x 6' Pebble Mill, alumina brick lined. Urethane lined door (lighter weight), with drain valve. 25 Hp gear reduced drive, TEFC motor. Motor has been test run and ran fine. Motor drive is mounted to leg of pebble mill. Babbit bearings. Legs are steel I-beam.

Stock# 47994001

Used- Paul O. Abbe Pebble Mill, Model #1, 304 Stainless Steel Exterior, Alumina Ceramic Lined. 68" Diameter x 56" straight side. 117 Cubic feet total capacity, 29.25 working. Internal rated 14.7 PSI/Full Vacuum at 80 Degrees F. Carbon steel jacket rated 14.7 PSI at 80 Degrees F. Side by side 18" diameter charge ports with covers. Mounted on stainless steel legs with rotary unions. Main drive 40 HP, brake drive 15 HP. 3-20 RPM drum speed. Includes a control panel.