Used Cannabis and Hemp Presses

Stock# 42688005-C

Used- Franino Press Tauro 650 SGM capacity on germ up to 1500 MTD graind and up to 25 hp; 316L stainless steel on Contact Surfaces. Planetary Gear Reducer; Hydraulic or VFD Drive Options. Unique Drainage Cone. Increased Surface Area; Low Germ Damage. Less Than 50% Moisture at Outlet. Design for Fiber with 60% Moisture at Outlet.

Stock# 43378114-C

Used- Fette 73 Station Turret For A Model 3090I Rotary Tablet Press. 13 mm Maximum tablet diameter, 18 mm maximum depth of fill.

Stock# 43473234-C

Used- Manesty Rotary Tablet Press, Model Mark IV. 75 Stations, double sided, with pre-compression. Serial# 15866, new 1987.

Stock# 47651001-C

Used- Heyl & Patterson Renneburg Horizontal Screw Press, 304 Stainless Steel. Approximate capacity 800 to 1000 pounds per hour, moisture content in cake depending on product 75% to 85%. Approximate 12" diameter x 72" long screw. 1st Screen section approximate 16" long with approximate 1/8" diameter screen holes, 2nd section approximate 56" long with 1/16" diameter screen holes. 12" x 8" End top feed, air operated screw horizontal mover, end bottom discharge pan. Driven by a 20hp, 3/60/460 volt 1175 rpm XP motor. Mounted on a carbon steel frame. Serial# RO-6176, built 1995. Includes a holding tank with pumps, spare screw, screen segments, and end plate.

Stock# 42551130-C

Used- Stokes Rotary Tablet Press, Model 754. (45) Station, 10 ton compression pressure, dual sided, keyed upper punch guides, 3/4" maximum tablet diameter, 11/16" maximum depth of fill, force feeders with drives, nominally rated up to 4500 tablets per minute, approximately 7.5hp turrent motor, serial# 697013.

Stock# 61438-C

Used- RECONDITIONED Stokes "Ultra" Rotary Tablet Press, Model 565-1. 65 Stations, 3500 to 10,000 compacts per minute, 10 ton pressure above and below, maximum diameter 7/16", depth of fill 1/8" to 11/16", 7-1/2 hp motor, manual variable speed 1800 rpm, 220/60/3 phase. Mounted on a base with casters...

Stock# 42024021-C

Used- Kikusui Rotary Tablet Press, Model Gemini 1545 AWCZ. 45 station, 15 ton compression force with pre-compression adjustable to 5 tons. 25mm maximum tablet diameter, 16mm maximum depth of fill. Dual sided with feed hoppers, D tooled, rated up to 324,400 tablets/hour.

Stock# 42530005-C

Used- Stokes Rotary Tablet Press, Model BB2. 27 Stations. Keyed upper punch guides, 3/60/220/440, rated 725-1400 tablets per minute. Maximum 5/8" diameter, maximum 11/16" depth of fill, maximum pressure 2.5 tons.

Stock# 50372001-C

Used- Carlson Filtration Filter Press for Cannabis and Hemp, Stainless Steel. Approximate 91 Square Feet. Approximate 3.77 cubic feet cake capacity. (13) Approximate 22-1/2" x 22-1/2" x 3/8" thick 316 stainless steel plates, (13) approximate 22-1/2" x 22-1/2" x 1-1/2" thick 316 stainless steel frames. Manual closure. 2" Diameter 4-corner inlets/outlets. Mounted on painted carbon steel frame. Carlson tag, no serial #.

Stock# 50441002-C

Used- Vincent Corporation De-watering Screw Press for Cannabis and Hemp, Model KP-6, Stainless steel construction. 6" Diameter screw. Baldor Aldor Reliance 3 HP, 3 phase, 60 Cycle, 230-460 volt motor for Wash down Duty. Mounted on a portable stainless steel cart. Machine currently incomplete.