Used Coating Pans

Stock# 13919009

Used-Glatt GMPC 1 Coater. Stainless steel construction, 400/3/50 with a 6 hp/4.5 kW drive. 43.5 psi (6 bar) pressure.

Stock# 43445003

Used- Thomas Engineering Coating Pan, Model Spectrum Compu-Coater. Stainless steel construction, spray guns, filling valve, lifter, solution prep skid approximately 195 litre capacity, Extract Tech isolation booth, Thomas air handling unit, and WiP skid, new 2006.

Stock# 43445005

Used- Thomas Engineering Coating Pan, Model Spectrum 125. 316L Stainless steel construction, rated -0.25KpA at 80 C with spray guns and control system, includes air handling with fan, hepa filter and control panel, WiP skid with (1) used BCD Engineering approximately 950 litre, 316L stainless steel tank, rated atmospheric design pressure at -5 to 97 with pumps, mass flow meters and instrumentation, serial# 00122, new 2008.

Stock# 49449001

Used- Pellegrini Coating Pan, Model T300. 300 kg capacity. Stainless steel construction. Includes: spray nozzles, spraying guns with double Graco pumps, air handling equipment, electrical panel, dust protection, Mfg. 1996.

Stock# 49449002

Used- Pellegrini Coating Pan, Model T300. 300 kg capacity. Stainless steel construction. Includes: spray nozzles, spraying guns with double Graco pumps, air handling equipment, electrical panel, dust protection, Mfg. 1996.

Stock# 49687001

Used- Thomas Engineering Accela-Cota 48" Coating Pan, Model 48. Stainless steel exterior with painted steel sub frame: 48" diameter perforated rotary coating drum. (4) internal baffles housed in all S.S. enclosure. 19" diameter air inlet. 20" x 20" exhaust outlet each connected to pan contouring plenum chambers, drum speed indicator chain driving coating pan. 220/440/3 phase voltage. 19" diameter front open with hinged door. 16" x 15" sliding mounted window. Spray coating manifold with (mounting arm) nozzles are required. Bottom side bolt on service doors. Hinged side service doors on opposing side. see through acrylic in S.S. frames.

Stock# 82068

Used- Vector Freund Hi-Coater Coating Pan, Model HCT-48, Stainless Steel. 24" diameter pan, partially perforated. Volume 50 to 200 liter, batch size 150 kg. Front sight door. 3/60/480 volt.

Stock# 42551194

Used- Thomas Engineering 24" continuous coating pan, model CONT. COATER, stainless steel construction, approximately 24" diameter x 160" long perforated pan, nominally rated 100-3500 KG/hour throughput, dual spray gun assemblies with cole palmer pumps systems with flow meters, steam heated.

Stock# 42551195

Used- Thomas Engineering 24" continuous coating pan, model CONT. COATER, stainless steel construction, approximately 24" diameter x 160" long perforated pan, nominally rated 100-3500 KG/hour throughput, dual spray gun assemblies with cole palmer pumps systems with flow meters, steam heated. Schenck Accurate weight belt feed system, type MDLWB300-006, stainless steel construction with hoppers, serial# 61995-01A-WB300 with Dorner cleated inclined belt conveyor, approximately 1/9 hp motor drive, approximately 11" wide x 11' long ith 1.75" high cleats, 85" discharge height on stainless steel frame, steam heated air handling unit with blowers and controls, serial# 005.

Stock# 47453001

Used- Vector Freund Hi-Coater Coating Pan. Stainless steel coating chamber approximate 24" diameter x 16" deep with internal baffles. Unit includes blowers and control panel. New York Blower, Shop# C-5206-110, size 2104A05, driven by 5 hp, 3/60/230/460 volt, 3470 RPM motor, 3.5" diameter inlet, 3" outlet. Requires spray gun. Previously used in pharmaceutical application.

Stock# 48558004

Used- Thomas Engineering Coating Pan, Model "Accela-Cota" 24-111, Stainless Steel. Approximate working capacity of 40 pounds. Serial# 24-328. Includes Cleanroom Systems HVAC System, Model 99H0138-00, HEPAir Stainless Steel. Horizontal series. Mounted on casters.

Stock# 49256019

Used- CMS (Coating Machinery Systems) Continuous Drum Coater, Model WH-24-120IN, Stainless Steel. Drum approximately 24" diameter x 120" long. Maximum product volume 30% fill, 10 cubic feet, 283 liters. Driven by 1-1/2hp, 3/60/208/230 volt motor. Has extending/retracting spray bars with 10 coating nozzles (5 on each side), mechanical tilt. 10" x 9" inlet, 12" x 4" outlet. (2) 2" bottom liquid discharge. Mounted on a stainless steel frame.

Stock# 44298094

Used- Thomas Engineering Compu-Lab Coating Pan, Model CL24. Stainless steel construction, 24" diameter perforated pan with plennum , spray guns with onboard pump system, electrically heated with Watlow heater, blowers, pan motor drive all with vfd motor controllers and opporator controls, serial# CL-24-113, with Donaldson Torit downflo oval dust collector, model DFO1-1, 190 square feet filter area, 115 volt, 1.5hp motor, serial# 2835911-008.

Stock# 42530003

Used- Glatt Coater, Model GC-X 1000. Approximate 39.37" (1000mm) Diameter. 230/460 Volt. Serial# 101814. Built 2000.

Stock# 10151286

Used- Stokes 46" Polishing Pan, Model 900-001-8. Sanitary polished construction, circular shape. Mounted on a stainless steel base.

Stock# 41802083

Used- Glatt Drum Coater, Model GC-X-1500, 316 Stainless Steel. 60" diameter x 55" deep pan with 23-1/2" wide screen section and (4) baffles. Approximate 400 kg, 500 liter drum capacity, 1.5 to 15 drum rpm, temperature to 80 degree C. 23" diameter front opening. Unit includes a pump system with (5) Cole-Parmer Masterflex hose pumps, Model 77495-00, each driven by a 1/4 hp DC gear motor, and (5) Micro Motion Elite flow meters, Model CMF025M321NU, all mounted on a portable cart with a control panel. (1) CarcoCaire air handler, Model GCX-1500-ES, (1) spray arm system, (1) unloader, and (1) coater control panel.

Stock# 41802084

Used- 48" Glatt Coating Pan, type GC-X-1250, 48" diameter perforated pan, (5) spray guns with Arcadia pump system, serial #10165, new 1999.

Stock# 41802085

Used- 48" Glatt Coating Pan, type GC-X-1250, 48" diameter perforated pan, (5) spray guns with Arcadia pump system, serial #101642, new 1999.

Stock# 41802086

Used- 48" Glatt Coating Pan, type GC-X-1250, 48" diameter perforated pan, (5) spray guns with Arcadia pump system, serial #101643, new 1999.

Stock# 42044001

Used- Thomas Engineering Accela-Cota Coating Pan, model 48-111, 304 stainless steel. 48 diameter x 38 deep pan with a 19 opening, 51% open area with perforations, speed 1.5 to 12 rpm. Inside surface of pan 5,440 square inches. Pan capacities: Brim volume 200 liter, minimum volume 40 liter. Brim load at 1 kg/liter-200 kg, and 0.75kg/liter at 150 kg. Maximum load weight 400 pounds. (4) Internal mixing baffles. Includes a control panel. No ancillary equipment (air handling unit, pump, guns, dust collection).

Stock# 43378098

Used- Glatt Coating Pan, Model GCX1500. Stainless steel construciton, 1500 mm diameter perforated pan, spray guns with servo motor, operator interface and pan vfd controller, built 2003.

Stock# 43378099

Used- Glatt Coating Pan, Model GCX1500. Stainless steel construciton, 1500 mm diameter perforated pan, spray guns with servo motor, operator interface and pan vfd controller, serial# 101868, built 2003.

Stock# 42551203

Used-Vector Freund Hi Coater coating pan, model HC-150, 1500mm (59") pan diameter, stainless steel construction, perforated pan, with spray guns, Marlo air handling unit, steam heated, 7.5 hp, 230/460 volt blower, Cargocaire humidification system and control panel, serial# 43447, new 1991.

Stock# 49564075

Used- Pellegrini 60" Stainless Steel Polishing Pan, Model 300T. Includes controls. Serial# 1531.

Stock# 49564093

Used- Glatt 60" Procoater Coating Pan, Model GC-X-1500, Stainless Steel Construction. Includes spray nozzles, controls, air handling and heater. Serial# 101635.

Stock# 44724175

Used- Glatt Type GC-1500 Tablet Coater. Unit includes (5) spray guns. Includes Watson Marlow multi head peristaltic pump skid and Muller type FT600C stainless steel IBC lifter rated 600 kgs capacity. Unit includes wall mounted controls. Unit includes inlet air handling unit and exhaust filtration skid with explosion suppression. Has electrical and pneumatic control panels and WiP station. Serial# 101568-6594, built 1998.

Stock# 44724176

Used- Glatt Type GC-1500 Tablet Coater. Unit includes (5) spray guns. Includes Watson Marlow multi head peristaltic pump skid and Muller type FT600C stainless steel IBC lifter rated 600 kgs capacity. Unit includes wall mounted controls. Unit includes inlet air handling unit and exhaust filtration skid with explosion suppression. Has electrical and pneumatic control panels and WiP station. Serial# 101567.

Stock# 42530007

Used- Glatt Insert Model GPCG60, Stainless Steel. 56" Tall x 62" o.d. upper, 36" o.d. lower.

Stock# 42551170

Used- Thomas Engineering 66" Acela Cota coating pan, model 66D, stainless steel construction, 66" diameter perforated pan with internal lifting baffles, 19" diameter pan opening, 62.5" pan depth, 15 hp pan motor drive, spray guns with feed pump system, 850 kg max load weight, 850 liter brim volume, stainless steel enclosure, with air handling unit with approximately 25 and 60 hp blowers, steam heated with HEPA filters, Thomas Compu Coat 4 controls, serial# 66-877, new 1996.

Stock# 41321013

Used- Thomas 66” Accela Cota, Model 66-DXL. Brim volume 32.20 cubic feet. This pan is in good condition and features stainless steel cabinet/stainless steel construction, stainless steel pan baffles with perforated pan, pan process displays and controls. Includes Thomas Compu-Coat 4 control panel, includes bypass and exhaust plenum. No ancillary equipment (air handling unit, pump, guns, dust collection).

Stock# 43378125

Used- Thomas Engineering Coating Pan, Type Spectrum Coater. Approximately 66" diameter x 60" deep perforated pan, stainless steel construction, 10 hp, 230/460 volt pan drive, spray guns, solution make up system with tank and pump, Marlo air handling unit, type Stratohanlder, steam heated with 25 hp blower, serial# 05-38075-2-01, HEPA filter system with controls, serial# 106, new 2005

Stock# 46766011

Used- DTG Finn Belt Coater Model MAXI, 304 Stainless Steel, Approximate 72" wide Belt. Spray bar with (10) nozzles. Capacity 480 (liters) 16.9 (cubic feet). Approximate maximum batch size 700 pounds with process time of 40 to 45 minutes. Plastic belt driven by a 2.2 KW 3/60/460/89 rpm motor with 19.27:1 gearbox ratio. Control panel with Allen-Bradley Micro-Logix 1100 PLC and PowerFlex 4 drives. Allen-Bradley PanelView Plus 600 and Avery Weight-Tronix digital scale. Serial# 7651/1.

Stock# 46766012

Used- DTG Finn Belt Coater Model MAXI, 304 Stainless Steel, Approximate 72" wide Belt. Spray bar with (10) nozzles. Capacity 480 (liters) 16.9 (cubic feet). Approximate maximum batch size 700 pounds with process time of 40 to 45 minutes. Plastic belt driven by a 2.2 KW 3/60/460/89 rpm motor with 19.27:1 gearbox ratio. Control panel with Allen-Bradley Micro-Logix 1100 PLC and PowerFlex 4 drives. Allen-Bradley PanelView Plus 600 and Avery Weight-Tronix digital scale. Serial# 7651/2.

Stock# 46766013

Used- DTG Finn Belt Coater Model MAXI, 304 Stainless Steel, Approximate 72" wide Belt. Spray bar with (10) nozzles. Capacity 480 (liters) 16.9 (cubic feet). Approximate maximum batch size 700 pounds with process time of 40 to 45 minutes. Plastic belt driven by a 2.2 KW 3/60/460/89 rpm motor with 19.27:1 gearbox ratio. Control panel with Allen-Bradley Micro-Logix 1100 PLC and PowerFlex 4 drives. Allen-Bradley PanelView Plus 600 and Avery Weight-Tronix digital scale. Serial# 7651/3.

Stock# 46766014

Used- DTG Finn 10.89 cu ft Belt Coater, Model "Enhanced". Unit is rated for a 309+ liter capacity and a batch size of up to 480 lbs. Has a batch process of approximately 30-35 minutes. Requires minimum cool air flow of 1300 CFM @ 36.8 cu m/min. Uses an Allen Bradley MicroLogix 1100 PLC with AB PanelView 500 HMI. 3.5 kW. 59.9"L X 72.9"W X 104.4"T. Serial# 7651/4.

Stock# 46766015

Used- DTG Finn 10.89 Cubic Feet Belt Coater, Model "Enhanced". Unit is rated for a 309+ liter capacity and a batch size of up to 480 lbs. Has a batch process of approximately 30-35 minutes. Requires minimum cool air flow of 1300 CFM @ 36.8 cu m/min. Uses an Allen Bradley MicroLogix 1100 PLC with AB PanelView 500 HMI. 3.5 kW. 59.9"L X 72.9"W X 104.4"T. Serial# 7651/5.

Stock# 46766016

Used- DTG Finn 10.89 Cubic Feet Belt Coater, Model "Enhanced". Unit is rated for a 309+ liter capacity and a batch size of up to 480 lbs. Has a batch process of approximately 30-35 minutes. Requires minimum cool air flow of 1300 CFM @ 36.8 cu m/min. Uses an Allen Bradley MicroLogix 1100 PLC with AB PanelView 500 HMI. 3.5 kW. 59.9"L X 72.9"W X 104.4"T. Serial# 7651/F.

Stock# 46766017

Used- DTG Finn 10.89 Cubic Feet Belt Coater, Model "Enhanced". Unit is rated for a 309+ liter capacity and a batch size of up to 480 lbs. Has a batch process of approximately 30-35 minutes. Requires minimum cool air flow of 1300 CFM @ 36.8 cu m/min. Uses an Allen Bradley MicroLogix 1100 PLC with AB PanelView 500 HMI. 3.5 kW. 59.9"L X 72.9"W X 104.4"T. Serial# 7651/G.

Stock# 46766018

Used- DTG Finn 10.89 Cubic Feet Belt Coater, Model "Enhanced". Unit is rated for a 309+ liter capacity and a batch size of up to 480 lbs. Has a batch process of approximately 30-35 minutes. Requires minimum cool air flow of 1300 CFM @ 36.8 cu m/min. Uses an Allen Bradley MicroLogix 1100 PLC with AB PanelView 500 HMI. 3.5 kW. 59.9"L X 72.9"W X 104.4"T. Serial# 7651/8.

Stock# 42873002

Used- Marchant Schmidt Liquid Spray Applicator System, Stainless Steel. Consists of: (1) Approximate 40 gallon 304 stainless steel tank with a Lightnin clamp on agitator, model EV5P25. 3/4 Diameter shaft, no blade, driven by a 1/3hp, 1/115/208-230 volt, 1725 rpm motor. Center bottom discharge with (1) Watlow immersion heater, model BHNA17N5W-45, 3/480 volt, 3KW. (1) Wilden air operated double diaphragm pump, model P1/SPPP/TF/TF/STF, stainless steel. (1) Spray nozzle. Includes a control panel with a Watlow controller, and an Allen-Bradley MicroLogix 1000 controller. Mounted on a stainless steel frame with casters.