hit counter

Your Files Are Being Processed

70% Complete

Please Wait

Tell Us What Process Equipment You Have For Sale SELL YOUR EQUIPMENT

Used Rotary Screeners

Below is Aaron's inventory of unused and used rotary screeners. If you are looking to sell your used rotary screener submit a request online or contact Erik Eichert at 630-238-7480.

6 Rotary Screeners

Enter to Search

Used- Stainless Steel Glatt Quick Sieve Mill, Model GS 180

Stock# 44298020

Used- Glatt Quick Sieve Mill, Model GS 180, stainless steel construction, cantilever mounted with drive and controls. Serial #01833.

GLATT Model GS220 Quick Sieve Mill . Stainless Steel, 4KW Drive.

Stock# 48125026

Used- GLATT Model GS220 Quick Sieve Mill . Stainless Steel, 4KW Drive.

Used- Kason Portable Centri Centrifugal Sifter, 304 Stainless Steel.

Stock# 50105001

Used- Kason Portable Centri Centrifugal Sifter, 304 Stainless Steel. Approximate 10" diameter x 24" long stainless steel 4-blade rotor. Side hinged access door. Approximate 6-3/4" diameter top inlet with approximate 6" diameter x 9" long screw feed. Driven by a 3hp, 3/208-230/460 volt, 865 rpm motor. Side discharge approximate 5 more info...

Used- Langsenkamp Laboratory Separator, Model 150

Stock# 46479001

Used- Langsenkamp Laboratory Separator, Model 150, 316 Stainless Steel. Approximate capacity 1 to 2.5 tons per hour. Approximate 7" diameter x 12" long chamber with (2) 1-1/2" wide paddles. Feed hopper with 7" x 8-1/2" inlet, 6" wide lump breaker, 7/8" diameter shaft with (5) 7" long knives. Has a 2-1/2" diameter x 3-1/2" long f more info...

Used- Frewitt Turbosieve Sifter, Type SGV-004

Stock# 40789003

Used- Frewitt Turbosieve Sifter, Type SGV-004, 304 stainless steel. Approximately 7" diameter x 7" deep chamber, no sieve. Top feed with hopper, bottom discharge with chute. Driven by a 3 hp, 3/60/208-230/460 volt, 3450 rpm XP gearmotor, no ratio. Mounted on a stainless steel stand.

Used- Kice Industries BF Bran & Shorts Finisher, Model BF42, Carbon Steel.

Stock# 50185001

Used- Kice Industries BF Bran & Shorts Finisher, Model BF42, Carbon Steel. Rated 2000 to 4000 pounds per hour of coarse bran. Approximate 20" diameter x 42" long screen section with a 3 bar internal rotor, driven by a 20hp, 3/60/208-230/460 volt, 1755 rpm motor. Top end inlet, bottom outlet, end bottom overs outlet, (2) side acc more info...

Used- Stainless Steel Glatt Quick Sieve Mill, Model GS 180

Used- Stainless Steel Glatt Quick Sieve Mill, Model GS 180

Stock# 44298020

Used- Glatt Quick Sieve Mill, Model GS 180, stainless steel construction, cantilever mounted with drive and controls. Serial #01833.

Dia (in): Len (in): Mfr: Glatt Model: GS180
VIEW ITEM ADD TO CART

GLATT Model GS220 Quick Sieve Mill . Stainless Steel, 4KW Drive.

 GLATT Model GS220 Quick Sieve Mill . Stainless Steel, 4KW Drive.

Stock# 48125026

Used- GLATT Model GS220 Quick Sieve Mill . Stainless Steel, 4KW Drive.

Dia (in): Len (in): Mfr: Glatt Model: GS220
VIEW ITEM ADD TO CART

Used- Kason Portable Centri Centrifugal Sifter, 304 Stainless Steel.

Used- Kason Portable Centri Centrifugal Sifter, 304 Stainless Steel.

Stock# 50105001

Used- Kason Portable Centri Centrifugal Sifter, 304 Stainless Steel. Approximate 10" diameter x 24" long stainless steel 4-blade rotor. Side hinged access door. Approximate 6-3/4" diameter top inlet with approximate 6" diameter x 9" long screw feed. Driven by a 3hp, 3/208-230/460 volt, 865 rpm motor. Side discharge approximate 5" x 4" (overs). 10" diameter bottom outlet with magnet. Mounted on a stainless steel frame with casters. Serial # L-3201.

Dia (in): Len (in): Mfr: Kason Model:
VIEW ITEM ADD TO CART

Used- Langsenkamp Laboratory Separator, Model 150

Used- Langsenkamp Laboratory Separator, Model 150

Stock# 46479001

Used- Langsenkamp Laboratory Separator, Model 150, 316 Stainless Steel. Approximate capacity 1 to 2.5 tons per hour. Approximate 7" diameter x 12" long chamber with (2) 1-1/2" wide paddles. Feed hopper with 7" x 8-1/2" inlet, 6" wide lump breaker, 7/8" diameter shaft with (5) 7" long knives. Has a 2-1/2" diameter x 3-1/2" long feed screw. Driven by 1-1/2 hp, 1/60/115/208-230 volt, 1725 rpm gear motor. 2" Diameter discharge. Mounted on stainless steel frame with casters. Serial# L-347. Built 1985.

Dia (in): 7 Len (in): 12 Mfr: Langsenkamp Model: 150
VIEW ITEM ADD TO CART

Used- Frewitt Turbosieve Sifter, Type SGV-004

Used- Frewitt Turbosieve Sifter, Type SGV-004

Stock# 40789003

Used- Frewitt Turbosieve Sifter, Type SGV-004, 304 stainless steel. Approximately 7" diameter x 7" deep chamber, no sieve. Top feed with hopper, bottom discharge with chute. Driven by a 3 hp, 3/60/208-230/460 volt, 3450 rpm XP gearmotor, no ratio. Mounted on a stainless steel stand.

Dia (in): 7 Len (in): 7 Mfr: Frewitt Model: SGV-004
VIEW ITEM ADD TO CART

Used- Kice Industries BF Bran & Shorts Finisher, Model BF42, Carbon Steel.

Used- Kice Industries BF Bran & Shorts Finisher, Model BF42, Carbon Steel.

Stock# 50185001

Used- Kice Industries BF Bran & Shorts Finisher, Model BF42, Carbon Steel. Rated 2000 to 4000 pounds per hour of coarse bran. Approximate 20" diameter x 42" long screen section with a 3 bar internal rotor, driven by a 20hp, 3/60/208-230/460 volt, 1755 rpm motor. Top end inlet, bottom outlet, end bottom overs outlet, (2) side access doors. Mounted on a frame with 4 legs. No manufacturers tag with model or serial#.

Dia (in): 20 Len (in): 42 Mfr: Kice Model: BF42
VIEW ITEM ADD TO CART
  • Used- Stainless Steel Glatt Quick Sieve Mill, Model GS 180

    Used- Glatt Quick Sieve Mill, Model GS 180, stainless steel construction, cantilever mounted with drive and controls. Serial #01833.

    VIEW ITEM
  • GLATT Model GS220 Quick Sieve Mill . Stainless Steel, 4KW Drive.

    Used- GLATT Model GS220 Quick Sieve Mill . Stainless Steel, 4KW Drive.

    VIEW ITEM
  • Used- Kason Portable Centri Centrifugal Sifter, 304 Stainless Steel.

    Used- Kason Portable Centri Centrifugal Sifter, 304 Stainless Steel. Approximate 10" diameter x 24" long stainless steel 4-blade rotor. Side hinged access door. Approximate 6-3/4" diameter top inlet with approximate 6" diameter x 9" long screw feed. Driven by a 3hp, 3/208-230/460 volt, 865 rpm motor. Side discharge approximate 5" x 4" (overs). 10" diameter bottom outlet with magnet. Mounted on a stainless steel frame with casters. Serial # L-3201.

    VIEW ITEM
  • Used- Langsenkamp Laboratory Separator, Model 150

    Used- Langsenkamp Laboratory Separator, Model 150, 316 Stainless Steel. Approximate capacity 1 to 2.5 tons per hour. Approximate 7" diameter x 12" long chamber with (2) 1-1/2" wide paddles. Feed hopper with 7" x 8-1/2" inlet, 6" wide lump breaker, 7/8" diameter shaft with (5) 7" long knives. Has a 2-1/2" diameter x 3-1/2" long feed screw. Driven by 1-1/2 hp, 1/60/115/208-230 volt, 1725 rpm gear motor. 2" Diameter discharge. Mounted on stainless steel frame with casters. Serial# L-347. Built 1985.

    VIEW ITEM
  • Used- Frewitt Turbosieve Sifter, Type SGV-004

    Used- Frewitt Turbosieve Sifter, Type SGV-004, 304 stainless steel. Approximately 7" diameter x 7" deep chamber, no sieve. Top feed with hopper, bottom discharge with chute. Driven by a 3 hp, 3/60/208-230/460 volt, 3450 rpm XP gearmotor, no ratio. Mounted on a stainless steel stand.

    VIEW ITEM
  • Used- Kice Industries BF Bran & Shorts Finisher, Model BF42, Carbon Steel.

    Used- Kice Industries BF Bran & Shorts Finisher, Model BF42, Carbon Steel. Rated 2000 to 4000 pounds per hour of coarse bran. Approximate 20" diameter x 42" long screen section with a 3 bar internal rotor, driven by a 20hp, 3/60/208-230/460 volt, 1755 rpm motor. Top end inlet, bottom outlet, end bottom overs outlet, (2) side access doors. Mounted on a frame with 4 legs. No manufacturers tag with model or serial#.

    VIEW ITEM
Cash Icon
Surplus Equipment?

We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.

SELL YOUR EQUIPMENT
Search Icon
Browse Inventory

View our entire process equipment inventory online or visit our location for an equipment inspection.

View Inventory
Phone Icon
Contact Us

Email or call us to speak with an equipment specialist to answer any machinery questions you may have.

630-350-2200