Stainless Steel 0-499 Gallon

Stock# 45247008

Used- DCI Reactor, 3 Liter (0.79 Gallon), 316 Stainless Steel, Vertical. 6" Diameter x 8" straight side, flat tri-clamp top, dished bottom. Internal rated +40/-15 psi at -20 to 300 degrees F, jacket rated +10/-15 psi at -20 to 300 degrees F. Openings: top 3/4", 5/8", 5/16", 1" tri-clamp; 1/4" center bottom outlet. Mounted on 3 stainless steel legs. Serial #JS2221-E, built 2002.

Stock# 45247009

Used- DCI Reactor, 3 Liter (0.79 Gallon), 316 Stainless Steel, Vertical. 6" Diameter x 8" straight side, flat tri-clamp top, dished bottom. Internal rated +40/-15 psi at -20 to 300 degrees F, jacket rated +10/-15 psi at -20 to 300 degrees F. Openings: top 3/4", 5/8", 5/16", 1" tri-clamp; 1/4" center bottom outlet. Mounted on 3 stainless steel legs. Serial #92-PH-44821-A/B, built 1992.

Stock# 45247011

Used- DCI Reactor, 3 Liter (0.79 Gallon), 316 Stainless Steel, Vertical. 6" Diameter x 8" straight side, flat tri-clamp top, dished bottom. Internal rated +40/-15 psi at -20 to 300 degrees F, jacket rated +10/-15 psi at -20 to 300 degrees F. Openings: top 3/4", 5/8", 5/16", 1" tri-clamp; 1/4" center bottom outlet. Mounted on 3 stainless steel legs. Serial #JS2221-D, built 2002.

Stock# 42564003

Used- DCI Reactor, 10 Liter (2.6 Gallon), 316L Stainless Steel, Vertical. 7.73" Diameter x 12" straight side, flat clamp down top, cone bottom. Internal rated 100/-15 psi at -20 to 350 degree F. Approximate 6" section of bottom sidewall jacket rated 100/-15 psi at -20 to 350 degree F. (1) Side entering spray ball. 1" Sanitary center bottom outlet with an air operated valve. Mounts on 2 side lugs.

Stock# 50388123

Used- B. Braun Biostat C-DCU Lab Scale Fermentor. Consisting of: (1) Alfa-Laval Chemap Stainless steel vessel, 14 Liters (3.69 gallon). Internal & jacket rated -1/3 bar at 150 degrees C., bottom driven agitator, serial# 9-4956, built 1991. Includes a DCU control unit, mounted on a stainless steel frame.

Stock# 82937

Used- Precision Stainless Steel Reactor, 17 Liter (4.49 Gallon), 316L Stainless Steel. 10-1/4" Diameter x 14-1/4" deep. Flat bolt-on top, flat bottom. Internal rated 50 psi at -20 to 350 degrees F. vacuum design 15 psi, 304L stainless steel jacket rated 100 psi at -20 to 350 degrees F. Mounted on a stainless steel cart with casters. National Board# 8328, serial# 981400, Built 2000.

Stock# 42443007

Used- Cherry Burrell Reactor, 5.2 gallon (20 liter), 316L stainless steel, vertical. 12" Diameter x 10" straight side, flat clamp top, dish bottom. Internal rated 40 psi at 20 to 350 deg F, dimple jacket rated 100 psi at 20 to 350 deg F. Stainless steel sheathing. Provision for a clamp on agitator. Openings: top (2) 1 tri-clamp, 2" tri-clamp, 3 tri-clamp, 3 sightglass, approximate 1/2 NPT; 1-1/2 center bottom outlet. Mounted on 4 stainless steel legs.

Stock# 44886020

Used- Alloy Products Reactor 20 Liters (5.2 Gallons), 316L Stainless Steel, Vertical. Approximately 12" diameter x 10" straight side, dished top and bottom. Internal rated full vacuum/50 psi at -20 to 100 degrees F, 304 stainless steel jacket rated full vacuum/50 psi at -20 to 100 degrees F. Openings top (2) 3/8", (2) 1/2", 4". No bottom outlet. Skirt mounted.

Stock# 47254004

Used- Paul Mueller Reactor, 25 Liters (6.6 Gallon), 316 Stainless Steel, Vertical. 10" Diameter x 13" straight side. Flat bolt on top, cone bottom. Internal rated 90 psi and Full Vacuum at 32 to 300 degrees F. 304 Stainless steel jacket rated 120 psi at 32 to 300 degrees F. Top openings: (4) 1. 5", (2) 1", 1,25". 3" Center bottom outlet. Mounted on 3 stainless steel legs. Serial# 268418, National Board# 32482. Built 2001.

Stock# 50364001

Used- Precision Stainless Fermenter, 30 Liter (7.92 Gallon), 316L Stainless Steel, Vertical. Approximate 10-3/4" diameter x 22-1/4" straight side, dished top and bottom. Internal rated 50 psi at -20 to 350 degrees F. 304L Stainless Steel jacket rated 75 psi at -20 to 350 degrees F. Bottom entering agitator, 3 tier (6) blade impellers, driven by a 1 HP, 3/60/230/460 volt, 1750 rpm motor, gearbox (needs repair). Openings: top head, (1) 2", (4) 1-1/2" tri-clamp, side: (10) 1-5/8" threaded. 1-5/8" Side bottom outlet. (4) Sidewall baffles. Mounted on a stainless steel frame with casters. National board# 7831, Serial# 981172-9, Built 1998. No Controls.

Stock# 50364002

Used- Precision Stainless Fermenter, 30 Liter (7.92 Gallons), 316L Stainless Steel, Vertical. Approximate 10-3/4" diameter x 22-1/4" straight side, dished top and bottom. Internal rated 50 psi at -20 to 350 degrees F. 304L Stainless Steel jacket rated 75 psi at -20 to 350 degrees F. Bottom entering agitator, 3 tier (6) blade impellers, driven by a 1 HP, 3/60/230/460 volt, 1750 rpm motor, gearbox. Openings: top head, (1) 2", (4) 1-1/2" tri-clamp, side: (10) 1-5/8" threaded. 1-5/8" Side bottom outlet. (4) Sidewall baffles. Mounted on a stainless steel frame with casters. National board# 7837, Serial# 981172-15, Built 1998. No Controls. Includes Grundfos Pump, type TP 32-40/4 U-G-A-BUBE, .33HP.

Stock# 44886007

Used- Alloy Products Reactor, 30 Liters (7.9 Gallons), 316L Stainless Steel, Vertical. Approximately 12" diameter x 12" straight side, dished top and bottom. Internal rated 50 psi/ full vacuum at -20 to 265 degrees F, 304 stainless steel jacket rated 150 psi at -20 to 265 degrees F. Openings: top 1/2", (2) 3/8", 1", 4"; no bottom outlet. Skirt mounted.

Stock# 44886008

Used- Alloy Products Reactor, 30 Liters (7.9 Gallons), 316L Stainless Steel, Vertical. Approximately 12" diameter x 12" straight side, dished top and bottom. Internal rated 50 psi/ full vacuum at -20 to 265 degrees F, 304 stainless steel jacket rated 150 psi at -20 to 265 degrees F. Openings: top 1/2", (2) 3/8", 1", 4"; no bottom outlet. Skirt mounted.

Stock# 44886009

Used- Alloy Products Reactor, 30 Liters (7.9 Gallons), 316L Stainless Steel, Vertical. Approximately 12" diameter x 12" straight side, dished top and bottom. Internal rated 50 psi/ full vacuum at -20 to 265 degrees F, 304 stainless steel jacket rated 150 psi at -20 to 265 degrees F. Openings: top 1/2", (2) 3/8", 1", 4"; no bottom outlet. Skirt mounted.

Stock# 44886010

Used- Alloy Products Reactor, 30 Liters (7.9 Gallons), 316L Stainless Steel, Vertical. Approximately 12" diameter x 12" straight side, dished top and bottom. Internal rated 50 psi/ full vacuum at -20 to 265 degrees F, 304 stainless steel jacket rated 150 psi at -20 to 265 degrees F. Openings: top 1/2", (2) 3/8", 1", 4"; no bottom outlet. Skirt mounted.

Stock# 44886012

Used- Alloy Products Reactor, 30 Liters (7.9 Gallons), 316L Stainless Steel, Vertical. Approximately 12" diameter x 12" straight side, dished top and bottom. Internal rated 50 psi/ full vacuum at -20 to 265 degrees F, 304 stainless steel jacket rated 150 psi at -20 to 265 degrees F. Openings: top 1/2", (2) 3/8", 1", 4"; no bottom outlet. Skirt mounted.

Stock# 44886013

Used- Alloy Products Reactor, 30 Liters (7.9 Gallons), 316L Stainless Steel, Vertical. Approximately 12" diameter x 12" straight side, dished top and bottom. Internal rated 50 psi/ full vacuum at -20 to 265 degrees F, 304 stainless steel jacket rated 150 psi at -20 to 265 degrees F. Openings: top 1/2", (2) 3/8", 1", 4"; no bottom outlet. Skirt mounted.

Stock# 44886015

Used- Alloy Products Reactor, 30 Liters (7.9 Gallons), 316L Stainless Steel, Vertical. Approximately 12" diameter x 12" straight side, dished top and bottom. Internal rated 50 psi/ full vacuum at -20 to 265 degrees F, 304 Stainless steel jacket rated 150 psi at -20 to 265 degrees F. Openings: top 1/2", (2) 3/8", 1", 4"; no bottom outlet. Skirt mounted.

Stock# 44886016

Used- Alloy Products Reactor, 30 Liters (7.9 Gallons), 316L Stainless Steel, Vertical. Approximately 12" diameter x 12" straight side, dished top and bottom. Internal rated 50 psi/ full vacuum at -20 to 265 degrees F, 304 stainless steel jacket rated 150 psi at -20 to 265 degrees F. Openings: top 1/2", (2) 3/8", 1", 4"; no bottom outlet. Skirt mounted.

Stock# 48996002

Unused- Alfa Laval Fermenter / Reactor, Approximate 40 Liter (10.5 Gallon), 316L Stainless Steel, Vertical. Approximate 12" diameter x 22" straight side, bolt-on flat top, dished bottom. Internal rated 45 PSI/FV at -20 to 400 degree F. 316L Stainless steel Jacket rated 150 psi/FV at -20 to 400 degree F. Bottom entering agitation 1/2hp drive, missing agitator. (1) Spray ball. Side lug mounted with load cells. National Board #264. Serial #786-100/17. Built 2004. Includes control panel with Wedgewood technology model 653 absorbance monitor, Mettler toledo Jag xtreme digital read out, (4) metering valves. All mounted on stainless steel frame.

Stock# 44410003

Used- Pressure Products Industries PPI Reactor, 11 Gallon. 316 Stainless steel construction. Approximately 16.5" diameter x 27.5" straight side, bolt on top, dish bottom, rated 590 psi at 407deg F internal, jacketed for 230 psi at 407 deg F, to mounted Dyna Max mixer with 5 hp, 460 volt agitator, three blade agitator, 4 baffled, post mounted, approximately 174 5/8" overall height, serial #370044V, National Board #590, new 2003.

Stock# 42564006

Used- Allegheny Bradford Reactor, 17 Gallon (65 Liter), 316L Stainless Steel, Vertical. Top tank section 19.73" diameter x 8" straight side, dished top; bottom tank section 7.73" diameter x 20" straight side, dished bottom. Internal CIP spray ball. Internal rated 60 psi at 20 to 100 degrees F. 304 Stainless steel dimple jacket rated 60 psi at 20 to 100 degrees F. Openings: top (6) 1-1/2" tri-clamp, 6" tri-clamp with a 1" tri-clamp, (1) 5/16"; 2" tri-clamp bottom outlet. Approximate 30" discharge height. Mounted on 3 stainless steel legs on a carbon steel cart with casters. Built 2002.

Stock# 44847019

Used- Pfaudler Reactor, 20 Gallon, 316 Stainless Steel, Vertical. Approximately 18" diameter x 18" straight side, dished top and bottom. Internal rated 60 psi or full vacuum at 350 degrees F, carbon steel jacket rated 90 psi at 350 degrees F. Anchor style agitator blade, driven by a Pfaudler drive, size 2.5 TWV, model SV-48270C-AKC, serial #25032X, ratio 5 to 1, set up for hydraulic drive, connection for drive broken off and missing, no power pack. Openings: top, 1", 1-1/2", (3) 2", (2) 4" hand holes; 2" center bottom outlet. Mounted on 3 carbon steel legs. National Board #28175, serial #E369-1492, built 1970.

Stock# 50943003

Used-Lee Industries Reactor, 20 Gallon, Model 20U, 316L Stainless Steel, Vertical. 18" Diameter x 15" straight side, dished clamp on bottom. Internal designed for vacuum service & rated 50 psi at -20 to 300 degrees F. 304 Stainless steel Uniflow coil jacket designed for vacuum service & rated 60 psi at -20 to 300 degrees F. Openings top 3/4", 1", 1-1/2", 3", 4" sight glass, 5" off center drive. 1-1/2" Center bottom outlet. Mounted on 3 stainless steel legs with casters. Serial# B3318Q, National Board# 4382, built 1989.

Stock# 50467053

Used- Roark Enterprises Reactor, 25 Gallon. Stainless steel construction, approximately 18" diameter x 24" straight side, dish bolt on top, dish bottom, rated 150 psi and full vacuum at 400 degree F internal, jacketed for 150 psi at 400 degree F, top entering 2 hp Chemineer agitator drive with mechanical seal, 230/460 volt XP motor, Serial # 95.709.ME2, National Board # 461. Built 1995.

Stock# 47772006

Used- Pure-Flo MPC Reactor, 25 Gallon, 316L Stainless Steel, Vertical. Approximate 24" diameter x 12" straight side, dished top and bottom. Internal rated 45 psi at -20 to 300 degrees F. 304 Stainless steel dimple jacket rated 100 psi at -20 to 300 degrees F. Opening top: 8" hand hole, (1) 4", (2) 2", (4) 1-1/2", side: 2". 2" Center bottom outlet. Mounted on (4) stainless steel legs with casters. Serial# MT5032-10070, National Board# 912, built 2005.

Stock# 47719003

Used- DCI Reactor, 100 Liter (26.4 Gallon), 316L Stainless Steel, Vertical. 22" Diameter x 20-1/2" straight side, dished top and bottom. Electro polished internal rated 125/-15 psi at -20 to 70 degrees F. 304 Stainless Steel dimple jacket rated 135/-15 psi at -20 to 358 degrees F. Insulated with 2" chloride free ceramic fiber and 304 stainless steel sheathing. Off center top entering Admix Rotosolver, Model 132RS101SS, Serial # 18792-3. Driven by a 10 hp, 3/60/208-230/460 volt, 3450 rpm motor. Openings top 1-1/2" tri-clamp, (3) 3" tri-clamp, 4", 6" drive. 2" Tri-clamp center bottom outlet. Mounted on 4 stainless steel legs on a stainless steel frame. Serial # JS2696, National Board # 5740. Built 2004.

Stock# 50774008

Used- DCI Reactor, 100 Liters (26.4 Gallons), Stainless Steel, Vertical. Approximately 20" diameter x 20" straight side, hinged dished clamp top, dished bottom. Internal rated 45 psi at -20 to 100 degrees F. Jacket rated 125 psi at -15 to 400 degrees F. Openings: top (4) 2", 1-1/2", 3", 3-1/2" tri-clamp, 10" hand hole. 2" Center bottom outlet. Spray ball. Mounted on (3) stainless steel legs with casters. National Board #2337, Serial# 93PH46891E, Built 1993.

Stock# 51173001

Used- DCI Reactor, 100 Liter (26.4 Gallon), 316 Stainless Steel, Vertical. Approximate 20" diameter x 23" straight side, dished removable top, dished bottom. Internal rated 45/-15 psi at -20 to 250 degrees F. Dimple jacket rated 135/-15 psi at -20 to 358 degrees F. 3" Chloride free ceramic insulation on shell and bottom head. Top offset agitator, driven by 1/2 hp, 3/60/230 volt, 1725 rpm motor, with approximate 1-1/4" diameter shaft and 5-1/2" diameter impeller, approximate impeller 47-223 rpm. Openings top: 6" handhole, 6" agitator, 4", 3", (6) 1-1/2". 1-1/2" Center bottom outlet. Spray ball. Mounted on legs with casters. Built 2005.

Stock# 50467035

Used- Gaspar Reactor, 30 Gallon. Stainless steel construction, approximately 24" diameter x 24" straight side, dish top and bottom, rated 150 psi and full vacuum at 400 degree F internal, jacketed for 150 psi at 400 degree F, top mounted 5 hp Chemineer agitator drive with mechanical seal, 230/460 volt XP motor, Serial # 495032, National Board # 821. Built 1995.

Stock# 43683003

Used- New Brunswick Fermentation System, Model 1F-150, Consisting of: (1) 115 liter/30 Gallon Working 150 liter/39.6 gallon total Culture vessel, 316 L stainless steel. Approximate 17-5/8 diameter x 33 straight side. Flat bolt on top, dished bottom. Internal rated 40 psi at 300 degrees F, 304 stainless steel jacket rated 35 psi at 300 degrees F. Sidewall baffles, bottom driven agitator, with a shaft and disc turbines, driven by 1-1/2 hp DC motor. Mounted on a carbon steel frame with a 1/3 hp vessel head lift. (1) Piping Module including valves, pipelines, 1/2 hp pump, and filters. (1) Control panel with a Model ML-4100 Multi-Loop Microprocessor Controller.

Stock# 43855002

Used- Pure-Flo Reactor, 30 Gallon, 316L Stainless Steel, Vertical. 18" Diameter x 26" straight side, dished top and bottom. Internal rated 20 psi at -20 to 350 degrees F, 304L stainless steel dimple jacket rated 150 psi at -20 to 350 degrees F. Off center bottom entering agitator with a 3 blade disc turbine, no drive. (1) Spray ball. Openings top (4) 1-1/2", (2) 2", (2) 3", 4", 6" hand hole with a sight glass cover. 2" Center bottom outlet. Mounted on 3 stainless steel legs. Built 2004.

Stock# 44625009

Used- T&C Stainless Reactor, 150 Liter (39 Gallon), 316L Stainless Steel, Vertical. 24" Diameter x 19" straight side, dished clamp top, dished bottom. Internal rated 60 psi and full vacuum at -20 to 350 degrees F, 316L stainless steel dimple jacket rated 60 psi and full vacuum at -20 to 350 degrees F. Provision for an off center bottom agitator. Openings: top (3) 1-1/2", 2", 3", off center 6" drive, 8" hand hole with cover; 1-1/2" center bottom outlet. Mounted on 4 stainless steel legs with a stainless steel frame. Built 2005.

Stock# 44625024

Used- Precision Stainless Reactor, 150 Liter (39 Gallon), 316L Stainless Steel, Vertical. 20" Diameter x 30" straight side, clamp dished top, dished bottom. Internal rated 40 psi at -20 to 300 degrees F, and vacuum design 15 psi. Approximate 14" bottom sidewall section of 304 L dimple jacket rated 90 psi at -20 to 300 degrees F, and vacuum design 15 psi. Openings: top 1", (4) 1-1/2", (4) 2", (2) 3", 4". Provision for an off center bottom mounted agitator. Approximately 2" off center bottom outlet. Mounted on (3) stainless steel legs.

Stock# 50317001

Used- ABEC Associated Bio-Engineers & Consultants 150 Liter (39.6 Gallon) Bioreactor System Consisting Of: (1) Stainless Technology reactor, 150 liter (39.6 gallon), 316L stainless steel, vertical. 18" Diameter x 32" straight side, hinged clamp on dished top, dish bottom. Internal rated 40/-15 psi at -20 to 300 degrees F., 304L stainless steel jacket rated 60/-15 psi at -20 to 300 degrees F. Bottom entering agitator with a 1-1/2" diameter shaft with 3 paddles blades, driven by a 1hp, 3/60/230/460 volt, 1200 rpm gear motor, ratio 6.37 to 1. (3) Sidewall baffles. Various top and sidewall openings, off center bottom outlet. National Board# 4, serial# 6005, built 2003. Mounted on (3) stainless steel legs. Includes (1) Liquid gas feed skid with a 3/4hp pump, miscellaneous piping, filters, and valves, control panels with an Allen-Bradley VersaView 1500P, Allen-Bradley Logix 5555 controller, Allen-Bradley PowerFlex 70 drive, (2) Mettler Toledo transmitters, mounted on a stainless steel frame. (1) CIP skid with an approximate 40 gallon stainless steel tank, 1.5hp centrifugal pump, Mettler Toledo transmitter, control panel with an Allen-Bradley PanelView 1000, Allen-Bradley Logix 5555 controller, Allen-Bradley PowerFlex 70 drive, miscellaneous piping and valves. Mounted on a stainless steel frame with casters.

Stock# 48125042

Used- Pur-Flo Precision Reactor, 150 Liter (39.6 Gallon), 316L Stainless Steel. Unit has welded dished top and bottom heads. Internal rated 3.5 bar (51 psi) maximum working pressure at -28.9C to 150C (-20F to 302F) external stainless steel jacket.

Stock# 44802003

Used- Precision Stainless Reactor, 150 Liters (39.6 Gallons), 316L Stainless Steel, Vertical. Approximately 28" diameter x 14" straight side, dished clamp hinged top, dished bottom. Internal rated 50 psi at -20 to 300 degrees F, 304L stainless steel dimple jacket rated 100 psi at -20 to 300 degrees F internal, and jacket vacuum design 15 psi. Openings: top (5) 1-1/2", 4"; 2" center bottom outlet. Mounted on (4) stainless steel legs with casters. National Board #8494, serial #992527-2, built 2000.

Stock# 51173002

Used- DCI Reactor, 150 Liter (39.63 Gallon), 316 Stainless Steel, Vertical. Approximate 24" diameter x 22" straight side, dished removable top, dished bottom. Internal rated 45 psi at -20 to 361 degrees F., full vacuum. Dimple jacket rated 140 psi at -20 to 361 degrees F. 2" Chloride free ceramic insulation on shell and bottom head. Top offset agitator, driven by 1/2 hp, 3/60/230/460 volt, 1725 rpm motor, with approximate 1-1/8" diameter shaft and 5-1/2" diameter impeller, approximate impeller 88-345 rpm. Openings top: 10" handhole, 6" agitator, 4", (2) 3", (6) 1-1/2", 1". 1-1/2" Center bottom outlet. Spray ball. Mounted on legs with casters. Built 2006.

Stock# 47557001

Used- Brighton Corporation Reactor, 49.7 Gallon, 316L Stainless Steel, Vertical. 20" Diameter x 36" straight side. Removable top dished head, dished bottom. Internal rated 25 psi and Full Vacuum at 250 degrees F. 304 Stainless steel dimple jacket rated 25 psi and Full Vacuum at 250 degrees F. Openings top: (1) 4" for spray ball, (1) 4" with sight glass, (1) 3", (2) 1-1/2", (2) 1". 1-1/2" Center bottom outlet. (2) Side mounting brackets. Serial # B8432-3, National Board # 4299. Built 1978.

Stock# 47557002

Used- Brighton Corporation Reactor, 49.7 Gallon, 316L Stainless Steel, Vertical. 20" Diameter x 36" straight side. Removable top dished head, dished bottom. Internal rated 25 psi and Full Vacuum at 250 degrees F. 304 Stainless steel dimple jacket rated 25 psi and Full Vacuum at 250 degrees F. Openings top: (1) 4" for spray ball, (1) 4" with sight glass, (1) 3", (2) 1-1/2", (2) 1". 1-1/2" Center bottom outlet. (2) Side mounting brackets. Serial # B8431, National Board # 4282. Built 1978.

Stock# 41317023

Used- Precision Stainless Reactor, 52 Gallon (200 Liter), 316L Stainless Steel, Vertical. 24" diameter x 24" straight side.Dish top and bottom.Internal rated 50 psi at 300 degree F and -20 degree F at 50 psi. 15 psi internal vacuum design. Dimple jacket rated 125 psi at 300 degree F and -20 degree F at 125 psi. Openings: top 6'', (2) 1/2'', side 1-1/2'' tri-clamp, 1/2'' tangential center bottom outlet. Mounted on 4 stainless steel legs with casters.

Stock# 50774002

Used- DCI Reactor, 200 Liter (52.8 Gallons), 316L Stainless Steel, Vertical. Approximately 24" diameter x 27" straight side, hinged dished clamp top, dished bottom. Internal rated 45 psi at -15 to 400 degrees F, vacuum design. Jacket rate 125 psi. Openings: top (4) 1-1/2", 2", 3", 3-1/2" tri-clamp, 10" hand hole. 2" Center bottom outlet. Mounted on (3) stainless steel legs with casters. National Board# 2361, Serial# 93PH468994, Built 1993.

Stock# 13705061

Used- 60 Gallon Vertical Jacketed Dual Agitated Reactor, Type 316 Sanitary Stainless Steel Construction with internal polished finish, 28" i.d. x 22" T to T, welded dished heads, rated 90 PSI/ Full Vacuum @ 100 F internal, Stainless Steel Jacket, top openings- (1)- 8" dia.with quick opening cover, (1)-6", (3)- 1- 1/2", center bottom outlet with valve, Top angle mounted Admix Model 85-RS70 Rotosolver disperser driven by 2 Hp., 3/60/230- 460 volt 3450 RPM, Baldor stainless steel washdown motor, and Gast air operated agitator with shaft and blades, mounted on stainless steel legs with casters, ASME & NB Code Stamped, Built 2001.

Stock# 46971006

Used- Crepaco Reactor, 64 Gallon, 316L Stainless Steel, Vertical. 30" Diameter x 18" straight side, dished top and bottom. Internal rated 25 psi at 300 degrees F. 316L Stainless steel dimple jacket rated 75 psi at 300 degrees F. Top entering Lightnin agitator, Model X5S33, Serial # 5630, approximate 1" diameter shaft with a 3 blade turbine, driven by a 1/2 hp, 3/60/230/460 volt, 1725 rpm motor. Openings top (3) 1-1/2" tri-clamp, 3" tri-clamp. 2" Center bottom outlet. Mounted on 4 stainless steel legs. National Board # 5682, Serial # D-2027, built 1984.

Stock# 47519001

Used- DCI Reactor, 68.6 Gallons (260 Liter), 316L Stainless Steel, Vertical. Approximate 31" diameter x 18" straight side. Dished top and bottom heads. Internal rated 25/-15 psi at -20 to 250 degrees F. 316 Stainless steel dimple jacketed, rated 140/-15 psi at -20 to 361 degrees F. Openings top: 16" man way with hinged cover with a 10" opening, (2) 3", (5) 1-1/2", side: (4) 3/4" (25mm). 1-1/2" Center bottom outlet. Mounted on (4) stainless steel legs with casters. Serial# JS2852A, National Board# 5963, Built 2005.

Stock# 50774004

Used- Precision Stainless Reactor, 300 Liters (79.2 Gallons), 304L Stainless Steel, Vertical. Approximately 30" diameter x 28" straight side, hinged dished clamp top, dished bottom. Internal rated 45 psi at -20 to 275 degrees F, vacuum design. Jacket rated 75 psi at -20 to 275 degrees F. Openings: top (2) 2", (4) 1-1/2", 4" tri-clamp, 16" manway with 3" sight glass, 3" spray ball in cover. 2" Center bottom outlet. Mounted on (4) stainless steel legs with casters. National Board #8884, Serial# 201095-5, Built 2000.

Stock# 44886001

Used- Lee Industries Reactor, 300 Liters (79.2 Gallons), Model 300LU, 316L Stainless Steel, Vertical. 30" Diameter x 22" straight side, dished top and bottom. Internal designed for vacuum service and rated 40 psi at -20 to 300 degrees F, channel jacket rated 100 psi at -20 to 338 degrees F. (1) Spray ball. Openings: top (3) 1-1/2", 2", 4", 18" manway with cover. 2" Center bottom outlet. Mounted on 4 stainless steel legs with a stainless steel cart with casters.

Stock# 51173003

Used- DCI Reactor, 300 Liter (79.3 Gallon), 316 Stainless Steel, Vertical. Approximate 30" diameter x 28-5/8" straight side, dished removable top, dished bottom. Internal rated 45 psi at -20 to 361 degrees F., full vacuum. Dimple jacket rated 140 psi at -20 to 361 degrees F. 2" Chloride free ceramic insulation on shell and bottom head. Top offset agitator, driven by 1 hp motor. Openings top: 6" agitator, 6" sight glass, (2) 4", (2) 3", (7) 1-1/2". 2" Center bottom outlet. Spray ball. Mounted on legs with casters.

Stock# 13527014

Used- Northland Stainless Inc Reactor, Approximately 80 Gallon. T316 stainless steel (8 ga) inner shell, inner top head and inner bottom head. T304 stainless steel jacket shell and jacket head. Johns-Manville 814 insulation and stainless steel sheathing. T316 stainless steel flanges and couplings. 28" ID x 34-1/2" straight side. Shell MAWP 42.7 psi at 176 deg F. Min DWT -20 deg F at 42.7 psi. Stainless jacket MAWP 14.3 psi at 176 deg F. Bolted dish top with misc inlets including 6" flanged opening for agitator drive, 1-3/4", 4" plus additional small inlets..5 hp Lightnin Vektor drive. UL listed. 230/460V, 1725 rpm. Pressurized mechanical seal. Vektor model V5S37, serial #95/E35630. Stainless steel shaft inside vessel with 3 pitched turbine blades and stabilizer ring. Unit built in 1995. Shell, head and jacket thickness .165". Lug mounted with structural supports (included). Approximate 3" center bottom outlet; approximate 2-1/2" bottom outlet.

Stock# 40173001

Used- A-L Stainless Inc Fermentor, 80 gallon, 300 liter, 316 stainless steel. 30" diameter x 28" straight side. Dish top, flat bottom. Coil and jacket rated 3.16 KG/CM^2 (45 psi) @ 130 degrees C (266 degree F). Clamp on Philadelphia mixer, model PG-3, 350 rpm output. 1 1/4" diameter shaft with (2) 3 blade props, driven by a 3 hp, 3/60/230/460 volt, 1740 rpm motor. Openings: top (2) 3" sight glass, 16" manway with no cover, 2"; approximate 1 1/2" center bottom outlet. Mounted on 4 stainless steel legs. Approximate 2" discharge height.

Stock# 40173002

Used- All-Weld Fermentor, 80 gallon, 316 stainless steel. 30" diameter x 28" straight side. Dish top, flat bottom. Jacket and shell rated 45 psi @ 266 degrees F. Clamp on Philadelphia mixer, model PG-3. 1 1/4" diameter shaft with (2) 3 blade props, driven by a 3 hp, 3/60/230/460 volt, 1740 rpm motor. Openings: top (2) 3" sight glass, 16" manway with no cover, 2"; approximate 1 1/2 center bottom outlet.

Stock# 40173003

Used- All-Weld Fermentor, 80 gallon, 316 stainless steel.30" diameter x 28" straight side.Dish top, flat bottom.Jacket and shell rated 45 psi @ 266 degrees F.Clamp on Philadelphia mixer, model PG-15, 350 output rpm.1 1/4" diameter shaft with (2) 3 blade props, driven by a 1.5 hp, 3/60/208-230/460 volt, 1700 rpm motor.Openings: top (2) 3" sight glass, 16" manway with no cover, 2"; approximate 1 1/2 center bottom outlet.

Stock# 50943004

Used- Precision Stainless Reactor, 330 Liter (87 Gallon), 316L Stainless Steel, Vertical. Approximate 27" diameter x 42" straight side. Removable dished top. Dished bottom. Internal rated 45 psi at 300 degrees F. 316L Stainless steel dimple jacket rated 100 psi at 300 degrees F. Vessel & Jacket designed @ 29.92 In. Hg. vacuum. Top entering agitator with 3-blade turbine. 2" Center bottom outlet. Mounted on (4) stainless steel legs. Serial# 7562-4, National Board# 1706, Built 1987.

Stock# 50388083

Used- Northland Stainless Reactor, 100 Gallon, 316 Stainless Steel. Approximately 30" diameter x 36" straight side, dished top and bottom. Internal rated Full Vacuum/35 psi at -20 to 250 degrees F. 304 Stainless steel dimple jacket rated Full Vacuum/100 psi at -20 to 250 degrees F. Off center top entering agitator, approximate 1" diameter shaft with (2) 3 blade props, driven by a 1hp, 3/60/208-230/460 volt, 3450 rpm gear motor, ratio 5 to 1. 16" Top man way with cover, 2" center bottom outlet. Mounted on (4) stainless steel legs with casters. National Board #1086, serial #915326-2, built 1991.

Stock# 47290008

Used- Letco Reactor, 100 Gallons, 316L Stainless Steel, Vertical. 30" Diameter x 32" straight side. Dished top and bottom. Internal rated 50 psi/full vacuum at -20 to 250 degrees F. 316L Stainless steel half pipe coil jacket rated 90 psi at -20 to 250 degrees F. (1) Spray ball. Openings top: (1) 12" hand hole with 4" sight glass on hinged cover, (1) 6", (1) 3", (5) 1-1/2". Approximate 1-1/2" center bottom outlet. Mounted on 4 legs with casters. Serial# 3154-02. National Board# 1103. Built 1997.

Stock# 47290009

Used- Lee Industries Reactor, Model 100U, 100 Gallon, 316 Stainless Steel, Vertical. Approximate 30" diameter x 34" straight side, dish top and bottom. Internal rated 50 psi at -20 to 250 degrees F. 304 Stainless steel jacket rated 100 psi at -20 to 250 degrees F. Spray ball. Openings top: (5) 1-1/2", 3", 6", 12" with 4" sight glass on hinged cover. 1" Center bottom outlet. Mounted on 4 stainless steel legs with casters. Serial# C2512F. National Board# 6601. Built 1996.

Stock# 46371019

Used- Precision Stainless Reactor, 400 Liter (105 Gallon), 316L Stainless Steel, Vertical. 36" Diameter x 24" straight side, dished top and bottom heads. Internal rated 40 psi at -20 to 300 degrees F, vacuum design 14.7 psi. 304L Stainless steel dimple jacket rated 90 psi at -20 to 300 degrees F. Openings: top (1) 22" diameter manway with 4" tri-clamp in the cover, (6) 1-1/2" tri-clamp, (2) 2-1/2" tri-clamp; side 4" tri-clamp, (4) 1-1/2" tri-clamp; 1-1/2" center bottom outlet. Mounted on 4 stainless steel legs with casters. Serial #5458-2. National Board #3692. Built 1991.

Stock# 50095003

Used- Northland Stainless Reactor, 400 Liter(105.67) Gallon, 316 Stainless Steel, Vertical. Approximate 30" diameter x 31" straight side, dished top and bottom. Internal rated 50 psi at 100 degrees F. 304 Stainless steel dimple jacket rated 50 psi at 240 degrees F. Openings top: 8" flange, 8" tri-clamp with hinged cover and 4" sight glass, 5" sight glass. (3) 1-1/2" tri-clamp. 2" Center bottom outlet with valve with 1-1/2" discharge. Mounted on (4) stainless steel legs, missing casters. National board# 553, Serial# 863382, Built 1986.

Stock# 45110013

Used- Stainless Service Ltd. Reactor, Approximately 93 gallons (352 liter), 316L Stainless Steel, Vertical. Internal rated 87 psi (6 bar)/ full vacuum design pressure at -22 to 392 degrees F (-30/200 degrees C). External 316L stainless steel limpet coil jacket rated 87 psi (6 bar)/full vacuum design pressure at -22 to 392 degrees F (-30/200 degrees C). Has bolted dished top and welded dished bottom heads. Top entering stainless steel agitator with (3) blades, driven by Lightnin Model LS25 gearbox with 0.25kw motor. Mounted on legs.

Stock# 87017

Used- Precision Stainless Reactor, 500 Liter (132 Gallon), 316L Stainless Steel, Vertical. 36" Diameter x 26" straight side. Dished top and bottom. Internal rated 100 psi at -20 to 300 degree F, 304L stainless steel dimple jacket rated 75 psi at -20 to 300 degree F. Off center, top entering. Openings: top (7) 2" tri-clamp, 6-1/2" tri-clamp, (2) 2-1/2" tri-clamp, (3) 3-1/2" tri-clamp, 16" man way with cover; 1-1/2" x 1" center bottom outlet. Mounted on 4 stainless steel legs. Approximate 26" discharge height. National Board # 7926, Serial # 982139-1. Built 1999.

Stock# 49260001

Used- Precision Stainless Reactor, 500 Liter (132.08 Gallon), 316L Stainless Steel, Vertical. Approximate 30" diameter x 40" straight side, dished heads. Internal rated 50 psi/FV at -20 to 350 degrees F. 304L Stainless steel dimple jacket rated 120 psi at -20 to 350 degrees F. (1) Spray ball. Openings top: 16" manway with cover, 3", (3) 1-1/2". 1-1/2" Center bottom outlet. Mounted on (4) legs with casters. National Board # 2685, Serial # 9395-6. Built 1989.

Stock# 49260003

Used- LEE Industries Reactor, 500 Liter (132.08 Gallon), Model 500LU, 316L Stainless Steel, Vertical. Approximate 36" diameter x 33" straight side, dished heads. Internal rated 60 psi at -20 to 350 degrees F. 304 Stainless steel uniflow coil jacket rated 100 psi at -20 to 350 degrees F. Vacuum designed. Sanitary bottom entering magnetic Lightnin agitator, model MBI*4101137, serial# R0036213003, rotation CW, driven by a 1/2 hp, 3/60/230/460 volt, 1725 rpm motor with TB Woods AC inverter. Openings top: 16" manway with cover, 4" sight glass, (2) 3", (4) 1-1/2", Side: (1) 2", (5) 1-1/2". 2" Center bottom outlet. (1) Spray ball. Mounted on (4) legs. National Board # 8215, Serial # 14214-29. Built 2000.

Stock# 40037427

Used- Precision Stainless Reactor, 150 Gallon, 316L Stainless Steel, Vertical. 36" diameter x 36" straight side, dished top and bottom. Internal rated 150 psi at 325 degree F, 17" dimple jacket rated 125 psi at 325 degree F. Openings: top 17" no cover, 2" center bottom outlet. Mounted on 4 stainless steel legs with casters.

Stock# 50136001

Used- Northland Stainless Reactor, Approximate 200 Gallon, 316 Stainless Steel, Vertical. Approximate 42" diameter x 30" straight side, dished heads. Internal rated 50 psi/FV at 300 degrees F. Carbon steel jacket rated 30 psi at 300 degrees F. Top offset entering Lightnin agitator, model XJSS-65, serial# 96/E84763-03, 3-blade turbine, driven by a .65 hp, 3/50/60/208-220/440 volt, 1725/1450 rpm motor. Openings top: 16" manway with cover(with sight glass), (1) 1", 1/2", (2) 1-1/2", 4", side: 1-1/2", (3) 2". 1" Center bottom outlet. Mounted on (4) legs. National board# 39, Serial# 76448-7, Built 1976.

Stock# 50136002

Used- Northland Stainless Reactor, Approximate 200 Gallon, 316 Stainless Steel, Vertical. Approximate 42" diameter x 30" straight side, dished heads. Internal rated 50 psi/FV at 300 degrees F. Carbon steel jacket rated 30 psi at 300 degrees F. Top offset entering Lightnin agitator, model XJSS-65, serial# 96/E84763, 3-blade turbine, driven by a .65 hp, 3/50/60/208-220/440 volt, 1725/1450 rpm motor. Openings top: 16" manway with cover(with sight glass), (1) 1", 1/2", (2) 1-1/2", 4", side: 1-1/2", (3) 2". 1" Center bottom outlet. Mounted on (4) legs. National board# 44, Serial# 76448-12, Built 1976.

Stock# 50136003

Used- Northland Stainless Reactor, Approximate 200 Gallon, 316 Stainless Steel, Vertical. Approximate 42" diameter x 30" straight side, dished heads. Internal rated 50 psi/FV at 300 degrees F. Carbon steel jacket rated 30 psi at 300 degrees F. Top offset entering Lightnin agitator, model XJSS-65, serial# 96/E84763-01, 3-blade turbine, driven by a .65 hp, 3/50/60/208-220/440 volt, 1725/1450 rpm motor. Openings top: 16" manway with cover(with sight glass), 1/2", (3) 1", 4" side: (3) 2", 1" threaded. 1" Center bottom outlet. Mounted on (4) legs. National board# 37, Serial# 76448-5, Built 1976.

Stock# 50136010

Used- Northland Stainless Reactor, Approximate 200 Gallon, 316L Stainless Steel, Vertical. Approximate 41-5/8" diameter x 30" straight side, dished heads. Internal rated 50 psi/FV at 300 degrees F. 304L Stainless steel dimple jacket rated 150 psi at -20 to 300 degrees F. Openings top: 16" manway with cover, (3) 2-1/2". 2" Center bottom outlet. Mounted on (4) legs. National Board # 718, Serial # 884340-1. Built 1988.

Stock# 50136011

Used- Precision Stainless Reactor, Approximate 200 Gallon, 316L Stainless Steel, Vertical. Approximate 35-5/8" diameter x 46-1/4"Straight side, dished heads. Internal rated 50 psi at 300 degrees F. 304L Stainless steel dimple jacket rated 150 psi at 300 degrees F. Openings top: 16" manway with cover, (3) 2-1/2". 2-1/2" Center bottom outlet. Mounted on (4) legs. National Board # 1676, Serial # 7622. Built 1987.

Stock# 50136012

Used- Northland Stainless Reactor, Approximate 200 Gallon, 316L Stainless Steel, Vertical. Approximate 41-5/8" diameter x 30" straight side, dished heads. Internal rated 50 psi/FV at -20 to 300 degrees F. 304L Stainless steel dimple jacket rated 150 psi at -20 to 300 degrees F. Openings top: 16" manway with cover. Approximate 2" center bottom outlet. National Board # 719, Serial # 884340-2. Built 1988.

Stock# 50943006

Used- Apache Stainless Reactor, 756 Liter (200 Gallon), 316L Stainless Steel, Vertical. 35-5/8" Diameter x 48" straight side, dished top and bottom. Internal rated 40 psi and full vacuum at -20 to 300 degrees F, dimple jacket rated 100 psi and full vacuum at -20 to 300 degrees F. (1) Spray ball. Openings: top (2) 1-1/2", 2', (3) 3", 4", 10" hand hole with cover; 2" center bottom outlet. Mounted on (4) stainless steel legs. Serial # 10788-2-2, National Board # 997, Built 2003.

Stock# 50136009

Used- Northland Stainless Reactor, Approximate 275 Gallon, 316L Stainless Steel, Vertical. Approximate 48" diameter x 33" straight side, dished top and bottom head. Internal rated 50 psi/FV at 350 degrees F. 304L Stainless steel dimple jacket rated 150 psi at 350 degrees F. Openings top 16" manway with cover, (2) 3/4", 1", 2" side: 3", approximate 2". 2" Center bottom outlet. Mounted on (4) legs. National Board # 489. Serial # 863208. Built 1986.

Stock# 10151077

Used-Cherry Burrell Jacketed Process Vessel, 300 Gallon, Vertical Stainless Steel. 4' Diameter x 4' straight side. Single shell dome top, insulated dished bottom. 97.5" Overall height. 304 Stainless steel, #4 finish. 34 Square feet of channel wall jacket on side wall rated 100 psi at 350 deg F, 2 zones. 5 Square foot dimple surface on bottom head, 1 zone. Basic header design with 1-1/4" NPT male connections for steam or water. 18" Manhole, 3" vent, 3" bottom outlet, (9) inlet ports on dome, mixer mount connection, baffles.

Stock# 42910001

Used- Cherry Burrell Reactor, 320 Gallon, 316L Stainless Steel, Vertical. 36" Diameter x 66" straight side, dished top and bottom. Electropolished internal rated 60 psi and FV at -20 to 350 degrees F. 304 Stainless steel channel jacket on side wall, and dimple jacket on bottom head rated 100 psi at -20 to 350 degrees F. Insulated with 2" high density mineral wool on side wall, 2" soft fiberglass on bottom head, and 304 stainless steel sheathing. (1) Side wall baffle, (2) Spray balls. Openings top (3) 1-1/2" 2", (2) 3", 4" sight glass, 6" off center drive, 16" man way with a 4" sight glass in the cover. 2" Center bottom outlet. Mounts on (3) stainless steel side lugs.

Stock# 82632

Used- Tolan Reactor, 325 Gallon, 304 stainless steel, vertical. 42" diameter x 48" straight side. Dished top and bottom. #4 polish internal rated 20 psi at 250 deg F, carbon steel jacket rated 30 psi at 200 deg F. Chemineer model VLA-15 agitator with 2 prop blades, driven by a 2 hp motor, approximately 450 output rpm. 4 side wall baffles. Openings: top 6", (2) 1", (2) 2", 12" drive, 10" manway with a sightglass in cover; 2" center bottom outlet. Side lug mounts. Built 1990.

Stock# 47100002

Used- Feldmeier Equipment Reactor, 396 Gallons (1500 Liters), 316L Stainless Steel, Vertical. 46" Diameter x 62" straight side, dished top and bottom. Electro polished internal rated 50/Full Vacuum psi at -20 to 300 degrees F. 48" Section of side wall dimple jacket rated 50 psi at -20 to 300 degrees F. Openings: top (3) 25mm, (3) 1-1/2" tri-clamp, (3) 2" tri-clamp, 3" tri-clamp, 16" man way with a 3" sight glass in the cover; side (2) 1-1/2" tri-clamp, (2) 25mm; 1-1/2" center bottom outlet. 304 Stainless steel sheathing with 2" chloride and asbestos free fiberglass. (1) Spray ball. Mounted on 3 stainless steel legs, with 6" x 6" pads. National Board# 1531, Serial# 5399-A2, built 1998.

Stock# 50388017

Used- A&B Process Systems Reactor. Approximate 400 Gallon, 304L Stainless Steel, Vertical. 54" Diameter x 24" straight side, Dished top, jacketed hemispherical bottom. Internal rated 150 psi at -20 to 425 degrees F. 304L stainless steel jacket rated 150 psi at -20 to 425 degrees F. Off center top entering angled anchor agitator with scrapers, driven by a 10 hp, 3/60/230/460 volt, 1770 rpm gear motor, ratio 40.80 to 1. Openings top: 18" man way with davit arm cover. 4" Center bottom outlet. Mounted on (3) side lugs. Serial # 1118160301B. National Board #1606. Built 2012.

Stock# 50388018

Used- A&B Process Systems Reactor, Approximate 400 Gallon, 304L Stainless Steel, Vertical. 54" Diameter x 24" straight side, Dished top, jacketed hemispherical bottom. Internal rated 150 psi at -20 to 425 degrees F., 304L stainless steel jacket rated 150 psi at -20 to 425 degrees F. Off center top entering angled anchor agitator with scrapers, driven by a 10 hp, 3/60/230/460 volt, 1770 rpm gear motor, ratio 40.80 to 1. Top 18" man way with davit arm cover, 4" center bottom outlet. Mounted on (3) side lugs. Serial # 1118160301C, National Board #1607. Built 2012.

Stock# 50388019

Used- A&B Process Systems Reactor, Approximate 400 Gallon, 304L Stainless Steel, Vertical. 54" Diameter x 24" straight side, Dished top, jacketed hemispherical bottom. Internal rated 150 psi at -20 to 425 degrees F., 304L stainless steel jacket rated 150 psi at -20 to 425 degrees F. (2) Off center top entering angled agitators. (1) Lightnin Model X6S150, Serial # 2719729, driven by a 1.5 hp, 3/60/208-230/460 volt, 1725 rpm motor, (1) anchor agitator with scrapers, driven by a 10 hp, 3/60/230/460 volt, 1770 rpm gear motor, ratio 40.80 to 1. Top 18" man way with davit arm cover, 4" center bottom outlet. Mounted on (3) side lugs. Serial # 1118160301A, National Board # 1605. Built 2012.

Stock# 50708002

Used- Mueller "F" Tank, 1600 Liter (422 Gallon). 316 stainless inner shell, Dual 304 jackets, 2" insulation, 304 stainless cladding. Tank MAWP - 60 psi at 350 degree F. Jacket MAW - 100 psi at 350degree F.