Used Complete Liquid and Paste Packaging Lines

Stock# 49788001

Used- Used PET Blow Molding- and PET Mineral Water Bottle Filling Line. Capacity of 6600 pcs of 0.5 liter PET bottles/hr., 5500 pcs of 1.5 liter PET bottles/hr. ,2L 5500 pcs/hr. of 2 liter PET bottles consisting of: (3) AMT Kocovská blow molders, type: VFA I, production capacity 2500 PET bottles/Hr. Cap size 30 mm. Serial number 015, 016, 017. New 2010. (1) AMT Kocovská bottle filling machine, type: PBA (PET Naturel), production capacity 6600 PET bottles/hr. New 2010, Serial number 008. (1) G I E M M E THERMO PACKAGING MACHINERY, packaging machines type: VEGA 30, production Capacity 20 kom/min. 90 psi (6 bar). Operating voltages 400 volt, Ph 3, 50 Hz, 60 kW, 80 A. New year 2010. Serial number 77100210, (1) DOMINO printer, type: GP series 100. New year 2010, Serial number N1A 24621. (1) Accraply TRINE labelling systems type: 4400, production capacity 8000 bottles/hr. Voltage 240 volt, Ph 3, 60 Hz, 15 At, 80 PSI, control panel. Serial number MSN 06801, New 2010. (1) MTA s.p.a. chiller/cooling unit, type TAE EVO 051. New year 2010, Serial Number 2200165786, (1) PROGOMETAL sol. S.r.o. palletizer, type: WMS 15 Optimum LGA, 1 pallet per minute incl. stretch foil wrapper. Serial number W 100107, New 2010. Incl. CIP system, control panel(s) and additional infrastructure.

Stock# 71554001

Used- Aerofil Aerosol Line with Gashouse. Line is capable of an estimated production output of 5,000-22,000 units per shift depending on can size. Was previously running 35mm, 38mm, 45mm, 50mm, 43mm, 57mm aerosol cans, and capable of running 66mm with parts. Capable of running both aluminum and tinplate containers, and valves with and without dip tubes. The line consists of the following: a Multilane Aerofil Container Infeed leading into a 4.75' long x 4' wide single file discharge; a pin sorted Aerofil Valve Elevator with Valve Sorter feeding into an Aerofil Model PC18; an Aerofill Gashouse, which feeds and indexes cans through a Garvens Checkweigher. The AeroFil PC18 is equipped with three product fillers, each with a 250ml fill capacity, and a single station crimper. The line also features automatic fill adjustment, height adjustment, and no can/no fill product nozzle. Uses Micro Electronic Control PLC controls. Aerofill Gashouse uses three gasser heads, each with a 200ml fill capacity, and is equipped with a Fenwal suppression system, Two independent ventilation systems; a Five channel gas detection system; Fully automatic sequential control logic. The Aerosol Universal Test Gripper-type Waterbath Can grip 1" cup aerosol valves. This line was last running personal care items in a clean room environment. Hand/operator-loaded unit.

Stock# 71920001

Used-Epak 14 head inline positive displacement filling line for detergents, liquids, creams or pastes. Last running laundry detergent bottles. Line consists of infeed conveyor, Sterling (Sleeveco) model 1000 sleeve labeler, Harland Mercury front and Back labeler with redundant heads, Sancoa RL-3000 rotary wraparound labeler, Hitachi PXR460W ink jet coder, E-Pak 14 head gear pump sytle filler, Fowler model 480NGdouble capper with integrated cap elevators, Lepel model ACC induction cap sealer, Douglas Model COBS-30 case former with dynatec hot melt glue, Hamrick model 360D case drop packer with laner, Standard Knapp model 455 BHM top sealer with dynatec hot melt. Autoprint series 400 case labeler, CTM model 360A label applicator and all interconnecting conveyors. Customer responsible for all rigging and removal costs. Equipment is available in late December of 2018.

Stock# 71623004

Used- Flexicon liquid filling line for 30 ml glass bottles consisting of: (1) Carmitic turn table, type cm103 48? (1230 mm) DIA. (1) dual Saama Rotary bottle feeders with Flexicon filler, model PD 121, presently set up for 30 ml glass bottles, incl. In line Rotary chuck cappers, (1) Carmitic turn table, type cm 103, 48? 1230 mm DIA. ,(1) inspection unit, (1) labeler, (1) cam Cartoner, type PMM, serial # C.14728 ppm.7, incl. GUK leaflet inserter, type FA 21/4 serial# C14728, built 1997, (1) Thorsted wrapper, type E-010, serial# 88.05.009 incl. Siemens op 393 control panel, (1) conveyer, (1) Soco taper, model T-10, serial# 739/95, built 1995 incl. Roll conveyer. European electrical power. Offered as-is. Contact AEK for details on assembly, electrical wiring and test running options.

Stock# 71985001

Used- 2009 Krones PET-Aseptic Filling System, for up to 50 Bottles Per Minute, Using H202 Hydrogen Peroxide Container Sterilizing. Consists of Krones Type: PET-Asept D, S/N K567-006 K122-845, with 10-Head Filling Station, 4-Head Foil Seal Station, and 4-Head Capping Station, with Valve/Pump Skid Including (2) Fristam 7-1/2 hp Centrifugal Pumps, M/N FPR742-145, with S/S Filters, S/S Air Valves, and S/S Piping, with Caverion (6) Compartment Filter System, Type: 3X1-H14/H14-200C, with S/S Computer/Controls Station, with (2) Spare Part Carts with Parts, Krones AirCo Air Conveyor System, Type: AIRCO S, S/N K970-B83, with (4) Krones Blowers, Approximately 84' Long with S/S Legs 2009 Fords Foil Press, M/N 320 MD Press, S/N 21375, Maximum Foil Caps Per Minute 67, Cap Size 036,1 x 4,0, with Controls, Mounted on S/S Frame, S/S Foil Cap Sanitation System, with Air Cap Conveyor Infeed/Outfeed, with (2) Furness Controls Differential Pressure Transmitter, with Digitial Read Outs 2009 Krones 26-Head Bottle Riser, Manf. No.: K563981, with Air Filtration Skid, Neck Handling and Inverter System, with Control Panels, Sidel Cap Feeding System, Project Number: 990094 4024, with Waterfall Vertical Conveyor with Flights, Approximately 39" Long x 39" Wide x 29" Deep Hopper with Drive, 2' W Conveyor, Approximately 14-1/2' High, S/S Incline Cap Air Conveyor, with (2) Drives, Plexi-Glass Covering, with 90 Degree Turn, Approximately 20' Long, S/S Cap Sanitation System, with Infeed/Outfeed Cap Air Conveyor, S/S Carasel Orienter, Overall Dimensions: Approximately 83" Long x 73" Wide x 14-1/2" Tall, with Pulley Dump System Krones AirCo Air Conveyor System, Type: AIRCO S, S/N K970-B83, with (4) Krones Blowers, Approximately 84' Long with S/S Legs 2009 Fords Foil Press, M/N 320 MD Press, S/N 21375, Maximum Foil Caps Per Minute 67, Cap Size 036,1 x 4,0, with Controls, Mounted on S/S Frame, S/S Foil Cap Sanitation System, with Air Cap Conveyor Infeed/Outfeed, with (2) Furness Controls Differential Pressure Transmitter, with Digitial Read Outs 2009 Lanfranchi S/S Bottle Unscrambler, Type RM.STD.9, S/N 18241.1423.09, 5,000 Bottle Per Hr. Output, with Upright Cylinder Orientor Carasel, with Allen Bradley PanelView Plus 600, with Incline Discharge Air Conveyor2009 Lanfranchi S/S Bottle Hopper/Incline Infeed Conveyor, Project: 1824 A04, Hopper Dimensions: Approximately 51" Long x 49" Wide x 31" Deep S/S Tote Dumper, with S/S Fame, Safety Lasers, and Drives. (NOTE: Dumped Cardboard Gaylords.)

Stock# 71920003

Used- Serac RT18 Net Weigh High Speed Lotion Filling Line. Consisting of Hoppmann Model FL100 bottle unscrambler with Model WEP40-22S-I sorter, Sancoa/Weiler RL-2000 rotary front and back pressure sensitive labeler, Hitachi PXRD460W ink jet coder, Serac/EPSI Model RT18 rotary net weigh filler, Fowler/Zalkin Model CAS-5/320NG rotary capper with integrated elevetor, Filtec 205 rejector, Resina Model P2287 plug inserter, Lepel CS plus 350 SS induction sealer, Wexxar Model WFT-S automatic case erector and bottom taper, Hamrick Model 360D drop packer with laner, Durable RM32 case sealer, CTM Model 360A case labeler, and all interconnecting conveyor. Customer responsible for all rigging and removal costs. Equipment is available in late December of 2018.

Stock# 71920004

Used- Serac R36ZV 121620 High Speed Net Weigh Filling Line for personal care lotions. Line consists of Pace Model M800 SSD bulk bottle unscrambler with integrated bottle hopper, dual Sancoa/Weiler Model RL4000 rotary pressure sensitive labelers, Axon Model Aurora premium sleeve labeler with integrated steam tunnel, Serac R36ZV 36 head rotary net weigh filler, Fowler FZ-816 rotary chuck capper, lepel CS Plus 350 SS induction sealer, Hitachi Model PXRD460W ink jet coder, ABC proforma 330 case erector, Hamrick Model 360D drop case packer with laner, Hamrick top case sealer, Dynatec hot melt glue systems, CTM 360A case labeler, Customer responsible for all rigging and removal costs. Equipment is available in late December of 2018.