Used Shrink Sleeve Labelers

Stock# 70226010

Used Sleeve Seal Model SL-600 Shrink Sleeve Labeler With Steam Tunnel. Bottle size range: 25-130mm dia, Label length: 25-300mm, Label thickness: 35-80 micron, Materials: PVC, OETG, OPS. Includes steam tunnel.

Stock# 73175003

Used AFM Sleever, Model Sl-LX150-V2B, Serial# 22N106070300202, Built 2017. Includes AFM Shrink Tunnel, Model STC-WSN500-2M, Serial# ST050978180201. never installed, Set up for 16 oz bottles.

Stock# 72393001

Used Accraply (Graham "Sleevit") Model 650VF High Speed Shrink Sleeve Label Applicator. Capable of speeds up to 650 Containers per minute (depending on application). Container size range: 1.1" - 6.6" or 28mm - 170mm (diameter) x 1.1" - 11.8" or 30mm - 300mm (height). Material types: PVC, PET/PETG, OPS, PLA. Allen Bradley Micrologix1000 PLC with a Proface HMI. Toshiba Powerflex 4 and Panasonic Servo Drives. Has print registration. Includes a 480V Electric Shrink Tunnel, Model 105HT. Serial # MSN06032. Tunnel has 6" wide x 6" high opening. Conveyor is 127" long x 4-1/2" wide table top chain. 3/60/230V Sleever, 3/60/480V, 60 Amp Tunnel. Serial # 5452.

Stock# 73243001

Unused- Aesus Continuous Motion Full Body Shrink Labeler, Model Premier Shrink. Capable of up to 150 CPM. Size range from 1-1/8" diameter up to 4.9" (198mm) diameter. Maximum lay flat 200mm. 5" Inside diameter sleeve roll core. 16" Outside diameter sleeve reel holder. Conveyor belt 4" wide. Allen Bradley Micrologix 1400 PLC, A/B panelview plus 7 HMI, Panasonic servo drive. End of film sensor, photo registration. Dual rotating sleeve applicator. Includes Aseus Deltaveyor 4" wide x 22' long, serial# 881760623. 3/60/208-240 Volt, 13 Amp. Serial# 889970523.

Stock# 73314001

Used Axon Shrink Sleeve/Neck Band Applicator, Model EZ150SL. Rated up to 150 products/minute; 30-125mm (1.18-4.92") product diameter range; 40-70 microns film thickness; 50-200mm (2-7.8") film layflat range; Stainless steel frame; Siemens controls. Has registration. Includes 94mm and 115mm mandrel. 3/220V. Built 2021. With Axon Heat Tunnel, Mode EZ36. 3/220V. Built 2021.

Stock# 70120007

Used Axon Model EZ-200 HS Automatic Shrink Sleeve / Neck Band Applicator with timing screw feed and table top conveyor. This unit can apply printed and unprinted PVC, PETG, OPS, PLA neck bans, sleeves and labels. It can run at speeds from 30 to 120 containers per minute depending on materials, containers and configuration. Container diameter range: 35-124 mm. Sleeve lay flat range: 55-205 mm. Film thickness: 40-70 microns (1.5-3.0 mil) Touch pad controls. 220 vac 1 ph electric power and 80 psi air required. Shrink tunnel not included.

Stock# 73225006

Used Fuji Seal Model FS400 High Speed Shrink Sleeve Labeler. Capable of speeds up to 750 PPM (Depending in application). Sleeve gauge 35-70 micron. Has dual worm screw infeed. Siemens Simatic S7-mEC PLC controls, Siemens HMI, Danfuss VLT drive, Sigmatek drives. 4" Wide conveyor. Approximate 3-3/4" wide cutting knife. Includes Fuji Seal Model ST Steam Tunnel. Fuji Seal automatic splice unit AS6, capable of up to a film web speed of 190 m/min and has 6 reel stations. Last running approximate 202 diameter (neck finish) slim can coffee beverage drink. 3/60/480V CE Certified.

Stock# 70226009

Used NAFM Shrink Sleeve Labeler, Model LC-300. Rated up to 500 cpm. Label height (cut length): Minimum: 1 inch, Maximum: 11.8 inches (30mm 300mm). Capable of running oval, round, square containers. Rotating blades, precision mandrel (bullet), servo drives. Includes (8) existing change part bullets for 2.75", 3.125" (750ml), (2) 3.5", (2) 3.625", 3.75", 4.5" diameter containers. Dual roll label unwind unit to maintain optimal film infeed tension for high speed operations. Operator interface controls, Allen Bradley Power Flex speed controllers, Allen Bradley PLC. Electrical 220 Volt, 3 Ph, 60 Hz.

Stock# 70970420

Used PDC Model R-300Tsert inline sleeve labeler. Has dual worm infeed, with registration and perforating wheel. Last running two count cough syrup bottles. Includes PDC model BDE-100 Serial# 197. Includes PDC Model KRC247278 shrink tunnel.

Stock# 70053031

Used PDC neck bander sleever, model 75E, speeds up to 300 containers/minute, .375 - 3.5" diameter, .625 - 9" high band size range, 480 volt with model KRC184658 PDC tunnel, 18 kw with 5" wide x 46" long tunnel opening on stand, 480 volt, tunnel serial# 335, bander serial#186.