Used Cannabis and Hemp Granulators

Stock# 11059198-C

Used- Fitzpatrick DAS-06 Fitzmill. Stainless steel construction, hammer/knife blades, base, 7.5 hp explosion proof drive motor 230/460, safety belt guard, start/stop control, mounted on cart with wheel.

Stock# 41177207-C

Used- Microfluidics Model M210AE/H Pilot Scale Microfluidizer Processor. Designed for high shear rates, maximizing the energy per unit fluid volume resulting in uniform submicron particle and droplet sizes. Pressure range 2,500 to 12,000 psi (170 to 810 bar), nominal flow rate range 1 to 1-1/2 gallons per minute, sample size 1 gallon to continuous. Mounted on casters. Motor is 15 hp and is rated for Hazardous Location, Box is rated for Class 1, Group C & D. Class 2 Group E,F,G. 316 stainless steel. 3/60/208/230/460V.

Stock# 41440017-C

Used Quadro Mill, Model U10. Stainless steel construction including machine, base, stand, motor, and Quadro hoist, 2 hp, up to 3600 rpm beater speed range. Mfg. 2014.

Stock# 41699046-C

Used- Fitzpatrick Fitzmill, model D6A, stainless steel. Parts machine. Driven by a 5 hp, 230/460 volt motor. Mounted on a stainless steel base with casters. NO chamber or cutting head.

Stock# 42564009-C

Used- Fluid Air Granumill Jr., 316 Stainless Steel. Chamber measures 5-1/2" diameter x approximately 3" deep. One piece cantilever rotor with 2 impact profiles and bottom screen. 2" Sanitary top inlet, 2-1/2" x 2-1/2" sanitary outlet. 100-10,000 rpm maximum. Rated .2-60 lbs/ hr. Finished particle size of 2000-27 microns. Driven by a 1/2 hp variable speed drive. Includes a control panel and semi-power digital display. Built 2001.

Stock# 43661002-C

Used- JT Homoloid Fitzmill, stainless steel construction, 7.5 hp, 230/460 volt motor, fixed blades, less tensioning bracket, less screen, serial# 1529.

Stock# 45474001-C

Used- Frewitt Oscillating Cannabis/Hemp Granulator, Type GLT-001, 304 Stainless Steel. Approximate capacity up to 80 kg per hour depending on the type of material. Driven by a 0.25 kw, 1/60/110 volt, 1660 rpm variable speed gear motor with Heynau reducer. Top feed 6.5" long x 4.5" wide, and bottom discharge with 3.5" diameter chute. Mounted on a stainless steel frame. Serial#098604. Unit requires a screen.

Stock# 46324003-C

Used- Paul O. Abbe Trunnion Mounted Jar Mill, Model 5. Total volume 24.25 gallons. Porcelain jar 20-1/2" diameter x 17" straight side. Driven by 3/4 hp, 3/60/208-230/460 volt, 1140 rpm motor thru a Dodge torque arm reducer, ratio 23.45 to 1, approximate drum speed 12 to 35 rpm. 6" Inlet/outlet with cover and clamp. Mounted on carbon steel legs with a common base. Serial #A42350, built 1990.

Stock# 47206001-C

Used- Fitzpatrick GuiloRiver Pre Breaker Mill, Model 16LX16D, 304 Stainless Steel. 16" Diameter x 16" wide rotating roll with hook shaped pins. Driven by a 10hp, 3/60/575 volt, 1740 rpm motor. 33" Tall feed hopper with clamp down cover. 18-1/2" x 17" Discharge opening with safety grate, approximate 36" discharge height. Mounted on a stainless steel frame with casters. Serial# 740.

Stock# 48417002-C

Used- Sturtevant Sample Grinder, Model 2-10, Carbon Steel. Approximate capacity 100 to 400 pounds per hour, product size 20 to 100 mesh. (1) 10" diameter grinding disc, driven by a 3 hp, 3/60/208-230/460 volt, 1750 rpm motor. Hinged door with (1) 10" diameter stationary grinding disc. Approximate top inlet 6-1/4" x 2-1/4", bottom outlet 6-3/4" x 4-3/8". Mounted on a carbon steel frame. Serial #1170. Built 2000.

Stock# 49190001-C

Used- Frewitt MF Oscillating Cannabis/Hemp Granulator, Model MF-6, 316 Stainless Steel. Approximate capacity up to 1000 kilograms per hour depending on the type of material. (5) Blade rotor, approximate speed 43 to 248 ocs./minute. Designed for powders with a particle size up to 5 cm. Driven by a 1.30 kW, 3/60/230/460 volt, 3420 rpm gear motor, with manual adjustable speed. Top cover with feed opening, bottom discharge with chute, front hinged door for sieve rotor and screen removal, manual screen tension. Requires screen support and screen. Mounted on stainless steel frame with casters. Serial# 09001822022, built 2009. 3/60/460 Volt, 16 amp.http://frewitt.com/en-us/Products/Prod-Mills/Oscillowitt-5cm-250%C2%B5m/3

Stock# 49553001-C

Used- Quadro Continuous Disperser System. Consisting of (2) Quadro ZC0 pilot scale powder disperser, 316 stainless steel. Liquid capacity 3 to 12 gallons per minute, Powder capcity 30 pounds per minute. Approximate 2-1/2" diameter, driven by a 3 HP, 3/60/208-230/460 volt, 3940 rpm motor, Serial# ZC0-0102/0103. (1) K-Tron twin screw feeder, model KMLD5KT35, 316 stainless steel, screws approximate 1-1/2" diameter, rated 5 kilograms per minute, driven by a 0.45 HP, 200 volt, 2000 rpm motor. (1) Solution tank with agitation, (1) holding tank, (1) Watson marlow 520U metering pump. Includes control panel with A/B PanelView Plus 600, A/B compact logix PLC, (2) A/B powerFlex 40 drives. All mounted on a stainless steel frame. Built 2010.

Stock# 49564020-C

Used- Frewitt MFH-6 Stainless Steel Hammer Mill(mounted in isolator), Model MFH-6. Nominally rated 2,000 kg/hr, gravity feed, service door mounted in 2 glove isolator cart. All Stainless construction, heavy duty casters. Serial# 5078510125.

Stock# 49761001-C

Used- Quadro Comil, Model U20, 316 Stainless Steel. Great for the Cannabis Industry. Approximate capacity 1,950 to 4250 pounds an hour. Top feed, bottom discharge, Screen 8" diameter, minimum inlet to outlet height 14-1/2". Driven by an approximate 5 hp (4kW), 3/60/230-460 volt, 1165 rpm XP motor. Mounted on 304 stainless steel frame with casters. Serial# U20-0554. Built 2006. Requires screen and impellar.

Stock# 50430001-C

Used- Cannabis Charles Ross High Shear Mixer, HSM 401SC/10, Horizontal, Stainless Steel. Driven by a 10 hp, 3/60/230/460 volt, 3500 RPM direct drive AC tech speed control. Includes S.L.I.M. solids, liquid injection manifold. (3) 1-1/2" Diameter tri-clamps ports. Stainless steel hopper 24" diameter x 20" deep. 2" Tri-clamp fittings with reducer to 1-1/2". Portable on base with casters. Serial# 103298.

Stock# 50634001-C

Used- Fryma Koruma Colloid Mill for CBD/Hemp Processing. Model MZ 80. Stainless Steel Construction. Jacketed Chamber rated 6 bar, 5.5 kw, 3450 rpm, includes feed hopper. Homogenizes oils and colloids (solid/liquid mixtures) for texture and bioavailability. 100-1,000 L/h throughput.

Stock# 83123-C

Used- Rietz Disintegrator, Model RP-6-K115, Stainless Steel Construction. 6" diameter rotor, angular design, 3 hp 230/460 volt XP variable speed drive.

Stock# 87745-C

Used- Rietz/Bepex Prebreaker, Model PB-15-K9G228, Stainless Steel. 15" Diameter screw, 15" wide x 21" long feed opening. Falk gearbox rated 150 hp less motor, 20.58:1 gearbox ratio, 1.64 service factor, 25 hp 460 volt cutter motor on unitized base.

Stock# 88136-C

Used- Fitzpatrick Fitzmill, Model D6A, Stainless Steel. Fixed knives, gravity feed cover, cantilevered design. 5 hp, 230/460 volt XP motor, product containment with blower system, on base. Provided with Allen Bradley PLC and motor VFD controls.