hit counter
AARON’S FAMILY OF COMPANIES

Your Files Are Being Processed

70% Complete

Please Wait

Vertical Air Classifying Mills

Below is Aaron's inventory of unused and used Vertical Air Classifying Mills. If you are looking to sell your used Vertical Air Classifying Mill submit a request online or contact Erik Eichert at 630-238-7480

5 Vertical Air Classifying Mills

Enter to Search

Used- Hosokawa Micron: Micron Powder Systems

Stock# 49385001

Used- Hosokawa Micron: Micron Powder Systems, Mikro Bantam Samplmill, Model: SH BANTAM 304SS. Maximum Rating: 14,000 RPM. Rotor diameter: 5". Reliance A-C motor. HP: 1/3, RPM: 1725, Volts: 208-230. AMPS: .3-1.4. HZ: 60. Includes: T-type Hammers (6), extra belts, screens, feeder.

Used- Schenck 8" Jet Mill / Pulverizer

Stock# 50117002

Used Schenck 8" Jet Mill / Pulverizer. Model 08-606. With Material Collector. Stainless steel. Unit has optional Tungsten Lining on the Pulverizer portion.

Mikro Air Classifying Mill, Model CX30ACM, Carbon Steel. Approximate 30" diameter grinding chamber....

Stock# 50171005

Used- Mikro Air Classifying Mill, Model CX30ACM, Carbon Steel. Approximate 30" diameter grinding chamber. Rotor speed 4600 rpm, driven by a 30hp, 3/60/230/460 volt, 3530 rpm motor. Separator wheel speed 2500 rpm, driven by a 10hp, 3/60/208-230/460 volt, 1770 rpm motor. Nominal airflow required 1500 cfm. Mounted on a base. Serial more info...

Used- Hosokawa Micron Powder Systems Air Classifying Mill, Model Mikro-ACM 300.

Stock# 50171001

Used- Hosokawa Micron Powder Systems Air Classifying Mill, Model Mikro-ACM 300, Carbon Steel. Approximate 44" diameter grinding chamber. Maximum rotor speed 2000 rpm, driven by a 300 hp, 3/60/460 volt, 1780 rpm motor. Top mounted separator wheel, maximum speed 2000 rpm, driven by a 50 hp, 3/60/460 volt, 1775 motor. Air capacity more info...

Used- Hosokawa Micron Powder Systems Air Classifying Mill, Model Mikro-ACM 300.

Stock# 50171002

Used- Hosokawa Micron Powder Systems Air Classifying Mill, Model Mikro-ACM 300, Carbon Steel. Approximate 44" diameter grinding chamber. Maximum rotor speed 2000 rpm, driven by a 300 hp, 3/60/460 volt, 1780 rpm motor. Top mounted separator wheel, maximum speed 2000 rpm, driven by a 50 hp, 3/60/460 volt, 1775 motor. Air capacity more info...

Used- Hosokawa Micron: Micron Powder Systems

Used- Hosokawa Micron: Micron Powder Systems

Stock# 49385001

Used- Hosokawa Micron: Micron Powder Systems, Mikro Bantam Samplmill, Model: SH BANTAM 304SS. Maximum Rating: 14,000 RPM. Rotor diameter: 5". Reliance A-C motor. HP: 1/3, RPM: 1725, Volts: 208-230. AMPS: .3-1.4. HZ: 60. Includes: T-type Hammers (6), extra belts, screens, feeder.

HP: Mfr: Hosokawa Model: SH BANTAM Material: Stainless Steel
VIEW ITEM ADD TO CART

Used- Schenck 8" Jet Mill / Pulverizer

Used- Schenck 8" Jet Mill / Pulverizer

Stock# 50117002

Used Schenck 8" Jet Mill / Pulverizer. Model 08-606. With Material Collector. Stainless steel. Unit has optional Tungsten Lining on the Pulverizer portion.

HP: Mfr: Schenk Model: 08-606 Material:
VIEW ITEM ADD TO CART

Mikro Air Classifying Mill, Model CX30ACM, Carbon Steel. Approximate 30" diameter grinding chamber....

 Mikro Air Classifying Mill, Model CX30ACM, Carbon Steel. Approximate 30" diameter grinding chamber....

Stock# 50171005

Used- Mikro Air Classifying Mill, Model CX30ACM, Carbon Steel. Approximate 30" diameter grinding chamber. Rotor speed 4600 rpm, driven by a 30hp, 3/60/230/460 volt, 3530 rpm motor. Separator wheel speed 2500 rpm, driven by a 10hp, 3/60/208-230/460 volt, 1770 rpm motor. Nominal airflow required 1500 cfm. Mounted on a base. Serial# 73C597.

HP: 30 Mfr: Mikro Corporation Model: CX30ACM Material: CS
VIEW ITEM ADD TO CART

Used- Hosokawa Micron Powder Systems Air Classifying Mill, Model Mikro-ACM 300.

Used- Hosokawa Micron Powder Systems Air Classifying Mill, Model Mikro-ACM 300.

Stock# 50171001

Used- Hosokawa Micron Powder Systems Air Classifying Mill, Model Mikro-ACM 300, Carbon Steel. Approximate 44" diameter grinding chamber. Maximum rotor speed 2000 rpm, driven by a 300 hp, 3/60/460 volt, 1780 rpm motor. Top mounted separator wheel, maximum speed 2000 rpm, driven by a 50 hp, 3/60/460 volt, 1775 motor. Air capacity 15,000 SCFM. Includes a control panel with Allen-Bradley PowerFlex 700 drive and an Allen-Bradley SMC-Flex drive. Serial # 2142002-C1. Built 2014. Mounted on a carbon steel frame.

HP: 300 Mfr: Hosokawa Model: Mikro-ACM 300 Material: CS
VIEW ITEM ADD TO CART

Used- Hosokawa Micron Powder Systems Air Classifying Mill, Model Mikro-ACM 300.

Used- Hosokawa Micron Powder Systems Air Classifying Mill, Model Mikro-ACM 300.

Stock# 50171002

Used- Hosokawa Micron Powder Systems Air Classifying Mill, Model Mikro-ACM 300, Carbon Steel. Approximate 44" diameter grinding chamber. Maximum rotor speed 2000 rpm, driven by a 300 hp, 3/60/460 volt, 1780 rpm motor. Top mounted separator wheel, maximum speed 2000 rpm, driven by a 50 hp, 3/60/460 volt, 1775 motor. Air capacity 15,000 SCFM. Includes a control panel with Allen-Bradley PowerFlex 700 drive and an Allen-Bradley SMC-Flex drive. Serial # 2142002-C2. Built 2014. Mounted on a carbon steel frame.

HP: 300 Mfr: Hosokawa Model: Mikro-ACM 300 Material: CS
VIEW ITEM ADD TO CART
  • Used- Hosokawa Micron: Micron Powder Systems

    Used- Hosokawa Micron: Micron Powder Systems, Mikro Bantam Samplmill, Model: SH BANTAM 304SS. Maximum Rating: 14,000 RPM. Rotor diameter: 5". Reliance A-C motor. HP: 1/3, RPM: 1725, Volts: 208-230. AMPS: .3-1.4. HZ: 60. Includes: T-type Hammers (6), extra belts, screens, feeder.

    VIEW ITEM
  • Used- Schenck 8" Jet Mill / Pulverizer

    Used Schenck 8" Jet Mill / Pulverizer. Model 08-606. With Material Collector. Stainless steel. Unit has optional Tungsten Lining on the Pulverizer portion.

    VIEW ITEM
  • Mikro Air Classifying Mill, Model CX30ACM, Carbon Steel. Approximate 30" diameter grinding chamber....

    Used- Mikro Air Classifying Mill, Model CX30ACM, Carbon Steel. Approximate 30" diameter grinding chamber. Rotor speed 4600 rpm, driven by a 30hp, 3/60/230/460 volt, 3530 rpm motor. Separator wheel speed 2500 rpm, driven by a 10hp, 3/60/208-230/460 volt, 1770 rpm motor. Nominal airflow required 1500 cfm. Mounted on a base. Serial# 73C597.

    VIEW ITEM
  • Used- Hosokawa Micron Powder Systems Air Classifying Mill, Model Mikro-ACM 300.

    Used- Hosokawa Micron Powder Systems Air Classifying Mill, Model Mikro-ACM 300, Carbon Steel. Approximate 44" diameter grinding chamber. Maximum rotor speed 2000 rpm, driven by a 300 hp, 3/60/460 volt, 1780 rpm motor. Top mounted separator wheel, maximum speed 2000 rpm, driven by a 50 hp, 3/60/460 volt, 1775 motor. Air capacity 15,000 SCFM. Includes a control panel with Allen-Bradley PowerFlex 700 drive and an Allen-Bradley SMC-Flex drive. Serial # 2142002-C1. Built 2014. Mounted on a carbon steel frame.

    VIEW ITEM
  • Used- Hosokawa Micron Powder Systems Air Classifying Mill, Model Mikro-ACM 300.

    Used- Hosokawa Micron Powder Systems Air Classifying Mill, Model Mikro-ACM 300, Carbon Steel. Approximate 44" diameter grinding chamber. Maximum rotor speed 2000 rpm, driven by a 300 hp, 3/60/460 volt, 1780 rpm motor. Top mounted separator wheel, maximum speed 2000 rpm, driven by a 50 hp, 3/60/460 volt, 1775 motor. Air capacity 15,000 SCFM. Includes a control panel with Allen-Bradley PowerFlex 700 drive and an Allen-Bradley SMC-Flex drive. Serial # 2142002-C2. Built 2014. Mounted on a carbon steel frame.

    VIEW ITEM
Cash Icon
Surplus Equipment?

We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.

SELL YOUR EQUIPMENT
Search Icon
Browse Inventory

View our entire process equipment inventory online or visit our location for an equipment inspection.

View Inventory
Phone Icon
Contact Us

Email or call us to speak with an equipment specialist to answer any machinery questions you may have.

630-350-2200