Used Cannabis and Hemp Tanks

Stock# 47491002

Used- Mueller Pressure Tank, Approximate 40 Liter (10.5 Gallon), 316L Stainless Steel, Vertical. Approximate 20" diameter x 8" straight side. Dished top and bottom. Internal 40 psi at 300 degrees F. Polished interior. Top: 2-1/2" center, (2) 4" tri-clamp, (2) 3" tri-clamp, (2) 2" tri-clamp, (1) 1-1-2". 3-1/4" Center bottom outlet. Mounted on (4) stainless steel legs with casters. Serial# P5912-14, National Board# 7211, built 1980.

Stock# 50388033

Used- Andy J. Egan Tank, Approximate 100 Gallon, 304L Stainless Steel, Vertical. Approximate 24" diameter x 48" straight side, dished bolt top, dished bottom. Top entering Lightnin agitator, Model X5S33, Serial # 2636794, driven by a 0.33 hp, 3/60/208-230/460 volt, 1725 rpm motor. (3) Sidewall baffles, strap on panel jacket. Openings top (3) 1", 2", 3", 4", 6", side (4) 3", 2" center bottom outlet. Mounted on (4) stainless steel legs. Built 2011.

Stock# 48125020

Used- HM Rustfri Design Tank Combination, 50 liter. Stainless steel construction, jacketed for 2.7 bar (39 psi at 150 degree C), top entering agitator, on 2 legs. Serial # FS-1210-5. Built 2011.

Stock# 47110029

Used- Bolz Rutten Sterile Storage Systems Pressure Tank, 13.2 Gallon (50 Liter) Capacity, 316L Stainless Steel, Vertical. Approximate 395mm (15.5") diameter by 304mm (12") straight side, dished top & bottom. Internal rated -1 bar (-14.5psi) / +4 bar (58 psi) at -45 to 150 degrees C. (-49 to 302 F). 6" Top opening with a screw down cover with (5) 3/4" Tri-clamp fittings. Skirt mounted. No bottom outlet. Serial# VDS 061-50, built 2005. Manufactured for Wyeth Vaccines.

Stock# 47110043

Used- Bolz Rutten Sterile Storage Systems Pressure Tank, 13.2 Gallon (50 Liter) Capacity, 316L Stainless Steel, Vertical. Approximate 395mm (15.5") diameter by 304mm (12") straight side, dished top & bottom. Internal rated -1 bar (-14.5psi) / +4 bar (58 psi) at -45 to 150 degrees C. (-49 to 302 F). 6" Top opening with a screw down cover with (5) 3/4" Tri-clamp fittings. Skirt mounted. No bottom outlet. Serial# VDS 010-50, built 2005. Manufactured for Wyeth Vaccines.

Stock# 43590001

Used- Allegheny Bradford Pressure Tank, 50 Liter (13.21 Gallon), 316L Stainless Steel, Vertical. Approximate 17.73" diameter x 9.18" deep. Dished bolt on top, dished bottom with an 10.42" diameter x 6" deep sump outlet. Internal rated 50 psi & Full Vacuum at -20 to 300 degrees F. Off center top entering agitator, 1/2" diameter shaft with a 3 blade turbine, no drive. Openings top 1", 2", (4) 1-1/2, 2-1/2". 1-1/2" Tri-clamp center bottom outlet. Mounted on (3) stainless steel legs with casters.

Stock# 43590026

Used- T&C Stainless Coned Pressure Tank, 50 Liter (13.21 Gallon), 316L Stainless Steel, Vertical. Approximate 18" top diameter x 19" deep. Dished bolt on top, flat bottom. Internal rated 50 psi/Full Vacuum at -25 to 350 degrees F. Off center bottom entering agitator blade, no drive. Openings top, ", 1-1/2" sight glass, (5) 1-1/2 tri-clamp, 2-1/2" tri-clamp, (2) 3" tri-clamp. Side 3" sight glass. 1-1/2" Off center bottom outlet. Mounted on a stainless steel frame with casters. Built 2003.

Stock# 43590027

Used- T&C Stainless Coned Pressure Tank, 50 Liter (13.21 Gallon), 316L Stainless Steel, Vertical. Approximate 18" top diameter x 19" deep. Dished bolt on top, flat bottom. Internal rated 50 psi/Full Vacuum at -25 to 350 degrees F. Off center bottom entering agitator blade, no drive. Openings top, ", 1-1/2" sight glass, (5) 1-1/2 tri-clamp, 2-1/2" tri-clamp, (2) 3" tri-clamp. Side 3" sight glass. 1-1/2" Off center bottom outlet. Mounted on a stainless steel frame with casters. Built 2003.

Stock# 50388062

Used- Tank, Approximate 175 Gallon, 304 Stainless Steel, Vertical. Approximate 32" diameter x 48" straight side, dished top, coned bottom. Openings top: 6", 3", 1". 2" Center bottom outlet. Mounted on (4) stainless steel legs.

Stock# 42564003

Used- DCI Reactor, 10 Liter (2.6 Gallon), 316L Stainless Steel, Vertical. 7.73" Diameter x 12" straight side, flat clamp down top, cone bottom. Internal rated 100/-15 psi at -20 to 350 degree F. Approximate 6" section of bottom sidewall jacket rated 100/-15 psi at -20 to 350 degree F. (1) Side entering spray ball. 1" Sanitary center bottom outlet with an air operated valve. Mounts on 2 side lugs. Serial#98PH59046, built 1998

Stock# 48376001

Used- Alloy Products Pressure Tank, Approximate 20 Gallon, 316L Stainless Steel, Vertical. 18" Diameter x 17" straight side. Dished top and bottom. Internal rated 129 psi at -20 to 100 degrees F. Openings top: approximate 6" X 5" oval handhold with cover, 3/4". Approximate 3/8" center bottom outlet. Mounted on 4 legs with casters. Serial# C206017-1-001, built 2008.

Stock# 44530002

Used- Alloy Products Pressure Tank, 22 Gallon, 316L Stainless Steel, Vertical. Approximately 18" diameter x 20" straight side, dished top and bottom. Internal rated 129 psi at -20 to 100 degrees F. Openings: top 5" x 6" oval with cover. Skirt mounted. Includes a stainless steel cart with casters.

Stock# 44574008

Used- Alloy Products Pressure Tank, 22 Gallon, 316 Stainless Steel, Vertical. 20" Diameter x 16" straight side, dished top and bottom. Internal rated 50 psi at 100 degrees F. Openings: top 3" x 4" oval, no cover. Stainless steel skirt mounted.

Stock# 49620024

Used- DCI Pressure Tank, 900 Liter (237 Gallon), 316L Stainless Steel, Vertical. 35-3/4" Diameter x 51-1/2" straight side, dished top and bottom. Internal rated 50/-15 psi at -20 to 350 degrees F. Insulated with 2" Inswool, and 304L stainless steel sheathing. Internal sidewall ladder. Openings top: (2) 1-1/2" tri-clamp, (3) 2" tri-clamp, (2) 3" tri-clamp, 18" manway with cover. 3" Tri-clamp center bottom outlet. Mounted on 4 stainless steel legs. Serial # 93-PH-47893D, National Board# 2533. Built 1993.

Stock# 43590042

Used- Alloy Products Pressure Tank, 25 Gallon, 316 Stainless Steel, Vertical. Approximate 18" diameter x 24" straight side. Dished top and bottom. Internal rated 110 psi at -20 to 100 degrees F. Openings top (3) 1" tri-clamp, 1-1/2" tri-clamp, 5" X 6" oval. Approximate 1/2" center bottom outlet. Stainless steel skirt mounted.

Stock# 41317020

Used- Precision Stainless Pressure Tank, 26 Gallon (100 Liter), 316L Stainless Steel, Vertical. 22" Diameter x 18" straight side. Dish top and bottom. Internal rated 50 psi at 300 deg F and -20 degrees F at 50 psi. Vacuum design 15 psi. Openings: top 8", (2) 1"; 1" tangential center bottom outlet. Mounted on 4 stainless steel legs with casters.

Stock# 44802005

Used- Precision Stainless Pressure Tank, 100 Liters (26.4 Gallons), 316L Stainless Steel, Vertical. Approximately 20" diameter x 22" straight side, dished top and bottom. Internal rated 50 psi at -20 to 300 degrees F, vacuum design 15 psi. Magnetic driven off center bottom agitator with (4) blade turbine, no motor. Openings; top 1", (2) 1-1/2", 8" tri-clamp (no cover); 1" center bottom outlet. Mounted on (3) stainless steel legs with casters. National Board #4805, serial #6506-3, built 1993.

Stock# 47519008

Used- Lee Industries Pressure Tank, Model 100LCBT, 26.4 Gallon (100 Liter), 316L Stainless Steel, Vertical. Approximate 17-1/2" diameter x 24" straight side. Dished removable top and dished bottom heads. Internal rated 30 psi at -20 to 300 degrees F, designed for vacuum service. Top offset entering agitator (no motor), with dual 3-blade turbines. Openings Top: 8" tri-clamp for agitator, (1) 3" tri-clamp, (5) 1-1/2" tri-clamp, side: 1-1/2". 1-1/2" Center bottom outlet. Mounted on (4) stainless steel legs with casters. Serial# 30119-3-3, National Board# 9584, built 2003.

Stock# 46971056

Used- Waukesha Cherry-Burrell Pressure Tank, 264 Gallon, 316L Stainless Steel, Vertical. 42" Diameter x 42" straight side, dished top and bottom. Internal rated 30 psi at -20 to 350 degrees F. Off center top entering Lightnin agitator thru the manway cover model MS6L1. Serial # 2766305. Approximate 1" diameter shaft with a 3 blade turbine, driven by a 1/2hp, 3/60/230/460 volt, 1745 rpmm motor. Mounted on 4 stainless steel legs. National Board # 4416, Serial # E-341-95. Built 1996.

Stock# 48549001

Used- Lee Industries Pressure Tank, 31.7 Gallon (120 Liter), Model 120LSS, 316L Stainless Steel, Vertical. 24" Diameter x 22" straight side, dished top and bottom. Internal rated 50 psi at -20 to 350 degrees F. Openings top: 14" manway with 4", (5) 1-1/2", 3", 2" tri-clamp. 1" Center bottom outlet. Polished Interior. Provision for clamp on agitator. Mounted on (4) stainless steel legs. National Board #7002, Serial# C4433B, Built 1997.

Stock# 44625024

Used- Precision Stainless Reactor, 150 Liter (39 Gallon), 316L Stainless Steel, Vertical. 20" Diameter x 30" straight side, clamp dished top, dished bottom. Internal rated 40 psi at -20 to 300 degrees F, and vacuum design 15 psi. Approximate 14" bottom sidewall section of 304 L dimple jacket rated 90 psi at -20 to 300 degrees F, and vacuum design 15 psi. Openings: top 1", (4) 1-1/2", (4) 2", (2) 3", 4". Provision for an off center bottom mounted agitator. Approximately 2" off center bottom outlet. Mounted on (3) stainless steel legs.

Stock# 48125049

Used- Sapphire Engineering 150 Liter(39.6 Gallon) Receiver, 316L Stainless Steel. Clamped Dish Top, Dish Bottom. Internal rated 3.4 bar/full vacuum design pressure at -28 to 177 deg.C. Unit mounted on 4 stainless steel legs with wheels.

Stock# 42948001

Used- Alloy Products Pressure Tank, Approximately 5 Gallon, 316L Stainless Steel, Vertical. 9' Diameter x 14" straight side. Dished top and bottom. Polished internal rated 135 psi at 20 to 135 degress F. Openings top (2) 7/8, (2) 3/8, 5 x 6 oval, no cover. Rubber skirt mounted.

Stock# 41317023

Used- Precision Stainless Reactor, 52 Gallon (200 Liter), 316L Stainless Steel, Vertical. 24" diameter x 24" straight side.Dish top and bottom.Internal rated 50 psi at 300 degree F and -20 degree F at 50 psi. 15 psi internal vacuum design. Dimple jacket rated 125 psi at 300 degree F and -20 degree F at 125 psi. Openings: top 6'', (2) 1/2'', side 1-1/2'' tri-clamp, 1/2'' tangential center bottom outlet. Mounted on 4 stainless steel legs with casters.

Stock# 42714001

Unused- Rutten Engineering Sterile Storage Systems Pressure Tank, 200 Liter (52.8 Gallon), 316L Electro Polished Stainless Steel, Vertical. 560mm (22.04) Diameter x 564mm (22.20) straight side, dished top and bottom. Top and bottom skirts. Internal rated 1/+4 bar (-14.50/+58 psi) at 65/+150 dec.c. (-85/+302 deg.f.). Openings top (1) 1-1/2 Tri-clmp, (1) 8 Tri-clamp with a cover and a dip tube. (1) Rutten magnetic agitator with a double stir-bar, no drive. 3/4 Tangential center bottom outlet. Provision for (3) side sight glass, missing glass. Includes a 304 Stainless steel vessel transport trolley. Built 2009.

Stock# 43744006

Used- Apache Stainless Pressure Tank. 7 Gallon, 316L Stainless Steel, Vertical. Approximately 12" diameter x 14" straight side, dished top and bottom. Internal rated 40 psi/full vacuum at -20 to 300 degrees F. Openings: top 5/8", (3) 1-1/2" tri-clamp, 4" tri-clamp. Bottom skirt mounted with wheels and top mounted handle. Built 2001.

Stock# 43744002

Used- Tri-State Precision Pressure Tank, 7-1/2 Gallon, 316 Stainless Steel, Vertical. Approximately 16" diameter x 7" straight side, dished top and bottom. Internal rated 30 psi at -20 to 275 degrees F. Side entering agitator with a 1" diameter shaft with a 3 blade prop, driven by a 3/4 hp, 3/60/230/460 volt, 1710 rpm gear motor, ratio 2.71 to 1, includes a Leeson speed controller. (1) Side entering spray ball. 9-1/2" Diameter top opening, missing cover, side (3) 1-1/2" tri-clamp, (2) 3" tri-clamp, 2" center bottom outlet. Mounted on a stainless steel frame with casters.

Stock# 50364002

Used- Precision Stainless Reactor, 30 Liter (7.92 Gallons), 316L Stainless Steel, Vertical. Approximate 10-3/4" diameter x 22-1/4" straight side, dished top and bottom. Internal rated 50 psi at -20 to 350 degrees F. 304L Stainless Steel jacket rated 75 psi at -20 to 350 degrees F. Bottom entering agitator, 3 tier (6) blade impellers, requires a 1 HP motor. Openings: top head, (1) 2", (4) 1-1/2" tri-clamp, side: (10) 1-5/8" threaded. 1-5/8" Side bottom outlet. (4) Sidewall baffles. Mounted on a stainless steel frame with casters. National board# 7837, Serial# 981172-15, Built 1998.

Stock# 48125021

Used- HM Rustfri Design, 150 liter. Stainless steel construction, jacketed for 2.7 bar (39 psi at 150 degree C), top entering Ekato agitator, on 2 legs. Serial # FS-1210-3. Built 2011.

Stock# 44425001

Used- Precision Stainless Pressure Tank, 80 Gallon, 316L Stainless Steel, Vertical. 38" Diameter x 26" straight side, dished top and bottom. Internal rated 50 psi at -20 to 300 degrees F, designed for 14.7 psi vacuum. Openings: top 1-1/2", (2) 2", 3", 16" manway with a 1-1/2" and 3" in the clamp down cover. 1-1/2" Center bottom outlet. Mounted on (4) stainless steel legs with casters.

Stock# 71614002

Used- Bartelt (KHS) Model IM7-16 Servo Horizontal Form Fill and Seal Machine. Rated for speeds up to 100 cpm. Has pouch size range: width 2"-5-3/4", height 2"-9" (change parts may be required). Now tooled for 5-1/2" W x 4-5/8" pouch. Uses Schneider Modicon Quantum PLC Controls and Eco Drive Servos. Has 2 product fill stations. Now equipped with desiccant bead filler and laboratory med device inserter, other fillers can be retrofitted as needed, consult AEK Sales Dept. Equipped with servo film feed and servo indexer, has film feed with web tracking and splice table, pre-heat, final heat and quench vertical seal stations, 2 fill stations with air knife openers, dual/front and back alternate pick and place pouch discharge. Uses a 6-inch core, features Power Unwind, Splice Table, Versatec web Tension Control, Web Tracking Control, Automatic Web Alignment. Cluster Lube. 3/60/480V. Serial #3628. mfg 2007

Stock# 50045001

Used New Brunswick Scientific BIOFLO IV Fermentor/Reactor; Model IV; 20 Liter Stainless Steel Reactor Vessel and Motor Drive. Includes Computer, Temperature Level, Foam Probes. Mfg. 2001.