Used Tape Bottom Seal Case Erectors

Stock# 71932010

Used- Combi Model 2EZ Case Erector Sealer. Machine is capable of speeds up to 12 cases per minute. Has a case size range of: 6" to 20" (long) by 4-1/2" to 16" (wide) by 4-1/2" to 18" (high). Serial# EZ59848.

Stock# 72496001

Used- Combi Model CE-10 Case Erector. Machine is capable of speeds from 500 to 700 cases per hour (about 12 cases per minute). Has a case size range of 8" - 17.5" length x 5" - 13.5" width x 5" - 17.5" height. Equipped with a high-capacity powered magazine for up to 200 cases. Allen Bradley Micrologix 1200 PLC controls. 3" Wide tape head. Becker vacuum pump. Discharge elevation 25"-30". Mounted on adjustable height legs. 80 psi at 2 cfm. 1/60/110 Volt, 20 amps. Designed to run a left hand case.

Stock# 72440008

Used- Durable Packaging (OK International) Model CA2000 Automatic Case Erector and Bottom Case Sealer. Right Hand Cases. Machine is Capable of erecting 20 cases per minute maximum. Case size range: 7" - 20" (length) x 6" - 16" (width) x 4" - 16" (height). 2" Wide tape head. Control panel with Allen Bradley Micrologix 1200 PLC. Serial# 602010428. 1/60/115 Volt.

Stock# 71523002

Used- Durable Packaging (OK International) Model CA1800 Automatic Case Erector and Bottom Case Sealer. Right Hand Cases. Machine is Capable of erecting 18 cases per minute, 1080 cases per hour. Has a case size range: 9" - 15" long x 6" - 14" wide x 5" - 15" depth. Equipped with 2" tape head. Uses Omron CPM 1A PLC controls. Air requirements 80 psi at 11cfm. 7.2 amps. 1/60/115V. See video of machine running on AEK web page.

Stock# 72449001

Used- EAGLE Packaging Machinery Case Erector, Model BOXXER T-12 RH. Capable of up to 12 cycles per minute. Size range: 11" to 24" length x 6" - 15" wide. Approximate maximum infeed width 39". Approximate maximum discharge 16" wide x 17" tall. 2" Bottom tape head. Omron Sysmac CP1L PLC, Weinview HMI. 1/60/120V, 10 Amp.

Stock# 72418001

Used- Lantech C1000L Automatic Case Erector and Bottom Taper, Model C-1000-Tape. Left hand discharge using RH cases. Capable of speeds up to 30 cases per minute. Has a case size range: 7-7/8" to 19-5/8" (200 - 500 mm) length x 5-7/8" to 12-3/4" (150 - 325 mm) width x 5-7/8" to 20-1/2" (150 - 520 mm) height/depth. 3" Wide tape closure. Side belt case indexing. A/B Micrologix 1200 PLC, UniOP HMI and (3) Emerson servo drives. Air supply 80 psi. 3/60/230 Volt.

Stock# 72418003

Used- Lantech C-1000 Automatic Case Erector and Bottom Tape Sealer. Left hand discharge using RH cases. Capable of speeds up to 30 cases per minute. Has a case size range: 7-7/8" to 19-5/8" (200 - 500 mm) length x 5-7/8" to 12-3/4" (150 - 325 mm) width x 5-7/8" to 20-1/2" (150 - 520 mm) height/depth. Tape closure, requires tape head. Side belt case indexing. A/B Micrologix 1200 PLC with UniOp HMI. (3) Emerson servo drives. Air supply 80 psi. 3/60/230 Volt.

Stock# 70970389

Used- Loveshaw Little David Model CF40-T Automatic Case Erector and Bottom Taper. Capable of speeds up to 20 cases per minute. Case size range: 7" to 24" (length) x 6" to 16" (width) x 4" to 16" (height). Has a chain and lug drive system to pull case through machine. Machine can be set to size for your products. Set up cost and lead times available upon request and receipt of product samples.

Stock# 72515001

Used-Loveshaw Little David Case Erector; Model CF-30; Bottom taper: 2 inch tape head; Fully adjustable ; 80 psi min.; .5 HP Motor; Minimum case dimensions: 8" Long x 8" Wide x 6" High; Maximum case dimensions: 18" Long x 15" Wide x 15" High; 10 cases per minute; Quick size changeover

Stock# 72448001

Used-Marq Model HPE2158-RH/DL, Automatic Case Erector, Bottom Taper; rated from 5 to 15 cases per minute depending on materials, application and machine configuration; Case size range: 8" to 27" in Length; 5.25" to 17" in Width; 3.5" to 18" in Height.; Equipped with continuous feed magazine, top vacuum suction cup pick off; and case erector, lugged chain case conveyor, minor and major flap closers, top arch squaring device and Dekka pressure sensitive 2" tape head; PLC controller has touch pad controls, with jog, hold, machine run; and arch top hold down up and down, switches with start; e-stop push button controls and status light bar; Mounted on a height adjustable base frame; OAD: 96" L x 82" W x 86" H

Stock# 70995004

Used-Maxco Case Erector, Model MEG-24L. Capable of speeds up to 35 cases per minute. Case size range: (Length)6" - 24" (Width) 8" - 14" (Depth) 6" - 18". KD length: 12" min. 34" max. KD width: 12" min. 28" max. Has Allen micrologix PLC and Allen Bradley PanelView 550. Serial #YO715. ** SALE SUBJECT TO SELLER'S APPROVAL **

Stock# 71671003

Used- Maxco Model ME-1600 Automatic Case Erector and Bottom Tape Sealer. Right Hand Cases. Capable of speeds from 5 to 20 cases per minute (depending on application). Has a case size range: 10" to 25" (length) x 6" to 17" (width) x 4" to 16" (depth). Equipped with flat blank case magazine, (3) vacuum suction cup case erecting system, 48" long bottom lugged and 58" long top lugged height adjustable case conveying system, major and minor flap closers. Mounted on casters. 3/60/480V. Uses 2" wide tape.