hit counter
AARON’S FAMILY OF COMPANIES

Your Files Are Being Processed

70% Complete

Please Wait

Used Paper Equipment

13 Paper Equipment

Enter to Search

Pinnacle Converting Slitter Rewinder. Unwind: 62" max roll width, up to 48" roll diameter, 2,000 lb...

Stock# 48534001

Used- Pinnacle Converting Slitter Rewinder. Unwind: 62" max roll width, up to 48" roll diameter, 2,000 lbs max. roll weight. Drop in shaft design using dual safety chucks. automatic unwind edge guide, splice surface, pneumatic clamping. Rewind: touch screen controls, 62' max. roll width. Roll diameter up to to 24" duplex and 40" more info...

Used- Pinnacle Converting Slitter Rewinder.

Stock# 48534002

Used- Pinnacle Converting Slitter Rewinder. Unwind: 62" maximum roll width, up to 48" roll diameter, 2,000 pounds maximum roll weight. Drop in shaft design using dual safety chucks. Automatic unwind edge guide, splice surface, pneumatic clamping. Rewind: touch screen controls, 62' maximum roll width. Roll diameter up to to 24" d more info...

Beloit Slitter Rewinder. Unwind : 30 inch to 120 inch roll width back stand. Up to a 60 inch roll d...

Stock# 49732001

Used- Beloit Slitter Rewinder. Unwind : 30 inch to 120 inch roll width back stand. Up to a 60 inch roll diameter. 4000 lb. maximum roll weight. Automatic roll pull out with hydraulic system. Brand new drives. Core less shafts. Full control panel. 480 volt capacity. 3 phase and 80 psi. Controlled with air cylinder and electrical more info...

Ahlstrom Slitter Rewinder. 2600 mm capacity. Speed 1800 m/min. Beloit cutting unit. Unwind width 80...

Stock# 48375002

Used- Ahlstrom Slitter Rewinder. 2600 mm capacity. Speed 1800 m/min. Beloit cutting unit. Unwind width 800 - 2850mm. Unwind roll diameter 400 - 1300mm, for Jumbo reels max. diameter is 2300mm. Max. edge trim width 150mm. 3 reeling stations. Support distance from bearing to bearing is 3100mm. Finished roll diameter max. 1500 mm. more info...

Used- C.E. Bauer Double Disc Refiner, Model 400-SF-5

Stock# 40756001

Used- C.E. Bauer Double Disc Refiner, Model 400-SF-5, Size 36. 316 Stainless Steel Product Contact Areas. Approximate (2) 36" diameter discs. 6" x 12-3/4" top feed, 30" x 12" bottom outlet. Each disc driven by a 250 hp, 3/60/460 volt, 1775 rpm motor. Mounted on a carbon steel base.

Used- Stainless Steel Bird Deflaker, Model DF2

Stock# 73966

Used- Bird Deflaker, Model DF2, Stainless Steel. 14" Diameter stationary rotor, 13" diameter reversible rotating rotor. External adjustment of axial clearance (fillings gap) .5" diameter inlet/outlet. Max throughput 600 gpm. Operating pressure 75 psi. Unit requires an approximate 125 hp motor and base mounting.

Used- Stainless Steel Bird Deflaker, Model DF2

Stock# 73967

Used- Bird Deflaker, Model DF2, Stainless Steel. 14" Diameter stationary rotor, 13" diameter reversible rotating rotor. External adjustment of axial clearance (fillings gap) .5" diameter inlet/outlet. Max throughput 600 gpm. Operating pressure 75 psi. Unit requires an approximate 125 hp motor and base mounting.

Used- Stainless Steel Bird Deflaker, Model DF2

Stock# 73968

Used- Bird Deflaker, Model DF2, Stainless Steel. 14" Diameter stationary rotor, 13" diameter reversible rotating rotor. External adjustment of axial clearance (fillings gap) .5" diameter inlet/outlet. Max throughput 600 gpm. Operating pressure 75 psi. Unit requires an approximate 125 hp motor and base mounting.

Used- Stainless Steel Black Clawson Pressure Centrifugal Screener, Ultrascreen I

Stock# 43668006

Used- Black Clawson Pressure Centrifugal Screener, Ultrascreen II, 316 Stainless Steel. Approximately 24" diameter x 14" tall slotted screen. Nominal capacity 50-300 tons per day, rated 75 psi maximum at 200 degrees F. Rotor driven by a 150hp, 3/60/460 volt, 1175 rpm motor. Inlet 10", accept 12", reject 4". Mounted on a carbon s more info...

Used- Black Clawson Selectifier Screen, Model 36P, 316 Stainless Steel.

Stock# 46799001

Used- Black Clawson Selectifier Screen, Model 36P, 316 Stainless Steel. 36" Diameter x 42-1/2" deep, 316 stainless steel slotted screen. Bottom driven with gearbox, no motor. 3 Blade rotor assembly. Openings (2) 17-1/2", (2) 4" diameter. Approximate capacity up to 500 tons per day. Mounted on a carbon steel base. Serial# 4493.

Used- Black Clawson Selectifier Screen, Model 24P, Carbon Steel.

Stock# 46799002

Used- Black Clawson Selectifier Screen, Model 24P. Approximately 24" diameter 316 stainless steel perforated screen, bottom driven with gearbox, no motor. 2 Blade rotor assembly. Openings (2) 12", (2) 4" diameter. Approximate capacity up to 600 tons per day. Mounted on a carbon steel base. Serial# 3347.

Used- Black Clawson Selectifier Screen, Model 24P, Carbon Steel.

Stock# 46799003

Used- Black Clawson Selectifier Screen, Model 24P. Approximately 24" diameter 316 stainless steel perforated screen, bottom driven with gearbox, no motor. 2 Blade rotor assembly. Openings (2) 12", (2) 4" diameter. Approximate capacity up to 600 tons per day. Mounted on (4) carbon steel legs. Serial# 3346.

Used- Stainless Steel Impco ( Ingersoll-Rand) Frota-Pulper, Model H25

Stock# 67517

Used- Impco ( Ingersoll-Rand) Frota-Pulper, Model H25, Stainless Steel. 15 x 15 top opening. (2) Approximately 16" diameter screws with a 4 pitch at charge end, height of flights approximately 3". Includes a Falk gearbox, model 1100YF1-S, ratio 1.0:1. Requires motor. Base mounted.

Pinnacle Converting Slitter Rewinder. Unwind: 62" max roll width, up to 48" roll diameter, 2,000 lb...

 Pinnacle Converting Slitter Rewinder. Unwind: 62" max roll width, up to 48" roll diameter, 2,000 lb...

Stock# 48534001

Used- Pinnacle Converting Slitter Rewinder. Unwind: 62" max roll width, up to 48" roll diameter, 2,000 lbs max. roll weight. Drop in shaft design using dual safety chucks. automatic unwind edge guide, splice surface, pneumatic clamping. Rewind: touch screen controls, 62' max. roll width. Roll diameter up to to 24" duplex and 40" simplex, 1,200 lbs max. roll weight, 0-900 fpm, pneumatic shear blade holders. Vacuum trim removal system, 460 volt, 3 phase, 80 psi.

Mfr: Dia (in): Material: Runners:
VIEW ITEM ADD TO CART

Used- Pinnacle Converting Slitter Rewinder.

Used- Pinnacle Converting Slitter Rewinder.

Stock# 48534002

Used- Pinnacle Converting Slitter Rewinder. Unwind: 62" maximum roll width, up to 48" roll diameter, 2,000 pounds maximum roll weight. Drop in shaft design using dual safety chucks. Automatic unwind edge guide, splice surface, pneumatic clamping. Rewind: touch screen controls, 62' maximum roll width. Roll diameter up to to 24" duplex and 40" simplex, 1,200 pounds maximum roll weight, 0-900 fpm, pneumatic shear blade holders. Vacuum trim removal system, 460 volt, 3 phase, 80 psi.

Mfr: Dia (in): Material: Runners:
VIEW ITEM ADD TO CART

Beloit Slitter Rewinder. Unwind : 30 inch to 120 inch roll width back stand. Up to a 60 inch roll d...

 Beloit Slitter Rewinder. Unwind : 30 inch to 120 inch roll width back stand. Up to a 60 inch roll d...

Stock# 49732001

Used- Beloit Slitter Rewinder. Unwind : 30 inch to 120 inch roll width back stand. Up to a 60 inch roll diameter. 4000 lb. maximum roll weight. Automatic roll pull out with hydraulic system. Brand new drives. Core less shafts. Full control panel. 480 volt capacity. 3 phase and 80 psi. Controlled with air cylinder and electrical system. Capable of vacuum trim but not included with machine. Safety lock out chucks. 5 blades included with machine (can use up to 12 blades).

Mfr: Dia (in): 60 Material: Runners:
VIEW ITEM ADD TO CART

Ahlstrom Slitter Rewinder. 2600 mm capacity. Speed 1800 m/min. Beloit cutting unit. Unwind width 80...

 Ahlstrom Slitter Rewinder. 2600 mm capacity. Speed 1800 m/min. Beloit cutting unit. Unwind width 80...

Stock# 48375002

Used- Ahlstrom Slitter Rewinder. 2600 mm capacity. Speed 1800 m/min. Beloit cutting unit. Unwind width 800 - 2850mm. Unwind roll diameter 400 - 1300mm, for Jumbo reels max. diameter is 2300mm. Max. edge trim width 150mm. 3 reeling stations. Support distance from bearing to bearing is 3100mm. Finished roll diameter max. 1500 mm. 10 knives unit.

Mfr: Ahlstrom Dia (in): Material: Runners:
VIEW ITEM ADD TO CART

Used- C.E. Bauer Double Disc Refiner, Model 400-SF-5

Used- C.E. Bauer Double Disc Refiner, Model 400-SF-5

Stock# 40756001

Used- C.E. Bauer Double Disc Refiner, Model 400-SF-5, Size 36. 316 Stainless Steel Product Contact Areas. Approximate (2) 36" diameter discs. 6" x 12-3/4" top feed, 30" x 12" bottom outlet. Each disc driven by a 250 hp, 3/60/460 volt, 1775 rpm motor. Mounted on a carbon steel base.

Mfr: Bauer Dia (in): 36 Material: 316 Stainless Steel Runners: 1
VIEW ITEM ADD TO CART

Used- Stainless Steel Bird Deflaker, Model DF2

Used- Stainless Steel Bird Deflaker, Model DF2

Stock# 73966

Used- Bird Deflaker, Model DF2, Stainless Steel. 14" Diameter stationary rotor, 13" diameter reversible rotating rotor. External adjustment of axial clearance (fillings gap) .5" diameter inlet/outlet. Max throughput 600 gpm. Operating pressure 75 psi. Unit requires an approximate 125 hp motor and base mounting.

Mfr: Bird Dia (in): 14 Material: Stainless Steel Runners:
VIEW ITEM ADD TO CART

Used- Stainless Steel Bird Deflaker, Model DF2

Used- Stainless Steel Bird Deflaker, Model DF2

Stock# 73967

Used- Bird Deflaker, Model DF2, Stainless Steel. 14" Diameter stationary rotor, 13" diameter reversible rotating rotor. External adjustment of axial clearance (fillings gap) .5" diameter inlet/outlet. Max throughput 600 gpm. Operating pressure 75 psi. Unit requires an approximate 125 hp motor and base mounting.

Mfr: Bird Dia (in): 14 Material: Stainless Steel Runners:
VIEW ITEM ADD TO CART

Used- Stainless Steel Bird Deflaker, Model DF2

Used- Stainless Steel Bird Deflaker, Model DF2

Stock# 73968

Used- Bird Deflaker, Model DF2, Stainless Steel. 14" Diameter stationary rotor, 13" diameter reversible rotating rotor. External adjustment of axial clearance (fillings gap) .5" diameter inlet/outlet. Max throughput 600 gpm. Operating pressure 75 psi. Unit requires an approximate 125 hp motor and base mounting.

Mfr: Bird Dia (in): 14 Material: Stainless Steel Runners:
VIEW ITEM ADD TO CART

Used- Stainless Steel Black Clawson Pressure Centrifugal Screener, Ultrascreen I

Used- Stainless Steel Black Clawson Pressure Centrifugal Screener, Ultrascreen I

Stock# 43668006

Used- Black Clawson Pressure Centrifugal Screener, Ultrascreen II, 316 Stainless Steel. Approximately 24" diameter x 14" tall slotted screen. Nominal capacity 50-300 tons per day, rated 75 psi maximum at 200 degrees F. Rotor driven by a 150hp, 3/60/460 volt, 1175 rpm motor. Inlet 10", accept 12", reject 4". Mounted on a carbon steel base. Includes an Allen-Bradley panel, 5hp power pack.

Mfr: Black Clawson Dia (in): 24 Material: 316SS Runners: 1
VIEW ITEM ADD TO CART

Used- Black Clawson Selectifier Screen, Model 36P, 316 Stainless Steel.

Used- Black Clawson Selectifier Screen, Model 36P, 316 Stainless Steel.

Stock# 46799001

Used- Black Clawson Selectifier Screen, Model 36P, 316 Stainless Steel. 36" Diameter x 42-1/2" deep, 316 stainless steel slotted screen. Bottom driven with gearbox, no motor. 3 Blade rotor assembly. Openings (2) 17-1/2", (2) 4" diameter. Approximate capacity up to 500 tons per day. Mounted on a carbon steel base. Serial# 4493.

Mfr: Black Clawson Dia (in): 36 Material: SS Runners:
VIEW ITEM ADD TO CART

Used- Black Clawson Selectifier Screen, Model 24P, Carbon Steel.

Used- Black Clawson Selectifier Screen, Model 24P, Carbon Steel.

Stock# 46799002

Used- Black Clawson Selectifier Screen, Model 24P. Approximately 24" diameter 316 stainless steel perforated screen, bottom driven with gearbox, no motor. 2 Blade rotor assembly. Openings (2) 12", (2) 4" diameter. Approximate capacity up to 600 tons per day. Mounted on a carbon steel base. Serial# 3347.

Mfr: Black Clawson Dia (in): 24 Material: SS Runners:
VIEW ITEM ADD TO CART

Used- Black Clawson Selectifier Screen, Model 24P, Carbon Steel.

Used- Black Clawson Selectifier Screen, Model 24P, Carbon Steel.

Stock# 46799003

Used- Black Clawson Selectifier Screen, Model 24P. Approximately 24" diameter 316 stainless steel perforated screen, bottom driven with gearbox, no motor. 2 Blade rotor assembly. Openings (2) 12", (2) 4" diameter. Approximate capacity up to 600 tons per day. Mounted on (4) carbon steel legs. Serial# 3346.

Mfr: Black Clawson Dia (in): 24 Material: SS Runners:
VIEW ITEM ADD TO CART

Used- Stainless Steel Impco ( Ingersoll-Rand) Frota-Pulper, Model H25

Used- Stainless Steel Impco ( Ingersoll-Rand) Frota-Pulper, Model H25

Stock# 67517

Used- Impco ( Ingersoll-Rand) Frota-Pulper, Model H25, Stainless Steel. 15 x 15 top opening. (2) Approximately 16" diameter screws with a 4 pitch at charge end, height of flights approximately 3". Includes a Falk gearbox, model 1100YF1-S, ratio 1.0:1. Requires motor. Base mounted.

Mfr: Impco Dia (in): 16 Material: Stainless Steel Runners: 2
VIEW ITEM ADD TO CART
  • Pinnacle Converting Slitter Rewinder. Unwind: 62" max roll width, up to 48" roll diameter, 2,000 lb...

    Used- Pinnacle Converting Slitter Rewinder. Unwind: 62" max roll width, up to 48" roll diameter, 2,000 lbs max. roll weight. Drop in shaft design using dual safety chucks. automatic unwind edge guide, splice surface, pneumatic clamping. Rewind: touch screen controls, 62' max. roll width. Roll diameter up to to 24" duplex and 40" simplex, 1,200 lbs max. roll weight, 0-900 fpm, pneumatic shear blade holders. Vacuum trim removal system, 460 volt, 3 phase, 80 psi.

    VIEW ITEM Add to Cart
  • Used- Pinnacle Converting Slitter Rewinder.

    Used- Pinnacle Converting Slitter Rewinder. Unwind: 62" maximum roll width, up to 48" roll diameter, 2,000 pounds maximum roll weight. Drop in shaft design using dual safety chucks. Automatic unwind edge guide, splice surface, pneumatic clamping. Rewind: touch screen controls, 62' maximum roll width. Roll diameter up to to 24" duplex and 40" simplex, 1,200 pounds maximum roll weight, 0-900 fpm, pneumatic shear blade holders. Vacuum trim removal system, 460 volt, 3 phase, 80 psi.

    VIEW ITEM Add to Cart
  • Beloit Slitter Rewinder. Unwind : 30 inch to 120 inch roll width back stand. Up to a 60 inch roll d...

    Used- Beloit Slitter Rewinder. Unwind : 30 inch to 120 inch roll width back stand. Up to a 60 inch roll diameter. 4000 lb. maximum roll weight. Automatic roll pull out with hydraulic system. Brand new drives. Core less shafts. Full control panel. 480 volt capacity. 3 phase and 80 psi. Controlled with air cylinder and electrical system. Capable of vacuum trim but not included with machine. Safety lock out chucks. 5 blades included with machine (can use up to 12 blades).

    VIEW ITEM Add to Cart
  • Ahlstrom Slitter Rewinder. 2600 mm capacity. Speed 1800 m/min. Beloit cutting unit. Unwind width 80...

    Used- Ahlstrom Slitter Rewinder. 2600 mm capacity. Speed 1800 m/min. Beloit cutting unit. Unwind width 800 - 2850mm. Unwind roll diameter 400 - 1300mm, for Jumbo reels max. diameter is 2300mm. Max. edge trim width 150mm. 3 reeling stations. Support distance from bearing to bearing is 3100mm. Finished roll diameter max. 1500 mm. 10 knives unit.

    VIEW ITEM Add to Cart
  • Used- C.E. Bauer Double Disc Refiner, Model 400-SF-5

    Used- C.E. Bauer Double Disc Refiner, Model 400-SF-5, Size 36. 316 Stainless Steel Product Contact Areas. Approximate (2) 36" diameter discs. 6" x 12-3/4" top feed, 30" x 12" bottom outlet. Each disc driven by a 250 hp, 3/60/460 volt, 1775 rpm motor. Mounted on a carbon steel base.

    VIEW ITEM Add to Cart
  • Used- Stainless Steel Bird Deflaker, Model DF2

    Used- Bird Deflaker, Model DF2, Stainless Steel. 14" Diameter stationary rotor, 13" diameter reversible rotating rotor. External adjustment of axial clearance (fillings gap) .5" diameter inlet/outlet. Max throughput 600 gpm. Operating pressure 75 psi. Unit requires an approximate 125 hp motor and base mounting.

    VIEW ITEM Add to Cart
  • Used- Stainless Steel Bird Deflaker, Model DF2

    Used- Bird Deflaker, Model DF2, Stainless Steel. 14" Diameter stationary rotor, 13" diameter reversible rotating rotor. External adjustment of axial clearance (fillings gap) .5" diameter inlet/outlet. Max throughput 600 gpm. Operating pressure 75 psi. Unit requires an approximate 125 hp motor and base mounting.

    VIEW ITEM Add to Cart
  • Used- Stainless Steel Bird Deflaker, Model DF2

    Used- Bird Deflaker, Model DF2, Stainless Steel. 14" Diameter stationary rotor, 13" diameter reversible rotating rotor. External adjustment of axial clearance (fillings gap) .5" diameter inlet/outlet. Max throughput 600 gpm. Operating pressure 75 psi. Unit requires an approximate 125 hp motor and base mounting.

    VIEW ITEM Add to Cart
  • Used- Stainless Steel Black Clawson Pressure Centrifugal Screener, Ultrascreen I

    Used- Black Clawson Pressure Centrifugal Screener, Ultrascreen II, 316 Stainless Steel. Approximately 24" diameter x 14" tall slotted screen. Nominal capacity 50-300 tons per day, rated 75 psi maximum at 200 degrees F. Rotor driven by a 150hp, 3/60/460 volt, 1175 rpm motor. Inlet 10", accept 12", reject 4". Mounted on a carbon steel base. Includes an Allen-Bradley panel, 5hp power pack.

    VIEW ITEM Add to Cart
  • Used- Black Clawson Selectifier Screen, Model 36P, 316 Stainless Steel.

    Used- Black Clawson Selectifier Screen, Model 36P, 316 Stainless Steel. 36" Diameter x 42-1/2" deep, 316 stainless steel slotted screen. Bottom driven with gearbox, no motor. 3 Blade rotor assembly. Openings (2) 17-1/2", (2) 4" diameter. Approximate capacity up to 500 tons per day. Mounted on a carbon steel base. Serial# 4493.

    VIEW ITEM Add to Cart
  • Used- Black Clawson Selectifier Screen, Model 24P, Carbon Steel.

    Used- Black Clawson Selectifier Screen, Model 24P. Approximately 24" diameter 316 stainless steel perforated screen, bottom driven with gearbox, no motor. 2 Blade rotor assembly. Openings (2) 12", (2) 4" diameter. Approximate capacity up to 600 tons per day. Mounted on a carbon steel base. Serial# 3347.

    VIEW ITEM Add to Cart
  • Used- Black Clawson Selectifier Screen, Model 24P, Carbon Steel.

    Used- Black Clawson Selectifier Screen, Model 24P. Approximately 24" diameter 316 stainless steel perforated screen, bottom driven with gearbox, no motor. 2 Blade rotor assembly. Openings (2) 12", (2) 4" diameter. Approximate capacity up to 600 tons per day. Mounted on (4) carbon steel legs. Serial# 3346.

    VIEW ITEM Add to Cart
  • Used- Stainless Steel Impco ( Ingersoll-Rand) Frota-Pulper, Model H25

    Used- Impco ( Ingersoll-Rand) Frota-Pulper, Model H25, Stainless Steel. 15 x 15 top opening. (2) Approximately 16" diameter screws with a 4 pitch at charge end, height of flights approximately 3". Includes a Falk gearbox, model 1100YF1-S, ratio 1.0:1. Requires motor. Base mounted.

    VIEW ITEM Add to Cart
Cash Icon
Surplus Equipment?

We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.

SELL YOUR EQUIPMENT
Search Icon
Browse Inventory

View our entire process equipment inventory online or visit our location for an equipment inspection.

View Inventory
Phone Icon
Contact Us

Email or call us to speak with an equipment specialist to answer any machinery questions you may have.

630-350-2200