Used 5000 Gallon and Up Stainless Steel Tanks

Stock# 45249001

Used- Stainless Steel Services Rubber Lined Stainless Steel Tank, 5555 Gallon, (21000 Liters), Vertical. Approximate 2700mm diameter x 4100mm straight side, flat welded top, dished bottom. Stainless steel external jacket. (2) Tier 3 blade pitched paddle type agitator driven by a 7.5kw, 400 volt motor with gearbox, ratio 16.7 to 1. Mounted on 4 legs.

Stock# 49641001

Used- Amer Industrial Technologies Tank, 6,000 Gallon, Stainless Steel, Vertical. 84" Diameter x 261" straight side, dished top and bottom. Openings top 2" (2) 3", 4", 6", side (2) 2" tri-clamp, 24" manway with cover, bottom 1", 3", 6" center. Mounts on 6 stainless steel legs which have been cut off.

Stock# 10151288

Used- Mueller 6000 Gallon Vertical Stainless Steel Jacketed Tank. Sanitary polished, interior, 7'4" diameter x 20' straight side. Last used in dairy application.

Stock# 10151289

Used- Mueller 6000 Gallon Vertical Stainless Steel Jacketed Tank. Sanitary polished, interior, 7'4" diameter x 20' straight side. Side bottom agitator. Last used in dairy application.

Stock# 10998010

Used- Walker, 6000 Gallon Vertical Tank. 304 stainless steel jacketed and insulated cooling tank rated for 55 gallons per minutes of glycol or cold water at 15psi Vessel dimensions. 108" diameter with 144" straight side. Dome top, dish bottom, 20" x 16" side manway with bolt down cover, thermowell, 3 Hp top mounted prop agitator and 3 1/2" OD / 3" ID tri-clamp style bottom discharge with pneumatic butterfly valve and 20" ground clearance. Top Ports:(1) 3 1/2"OD / 3"ID Tri-Clamp, (1) 2 1/2"OD / 2"ID Tri-Clamp, (1) 2"OD / 1 1/2"ID Tri-Clamp, (1) 2" NPT, (1) 2" Open Vent. Jacket Ports: (4) 1 1/2" NPT. OAD: 125" long x 115" wide x 220" high. 3/60/230/460, 3 hp, 8.6/4.3a, 1700 rpm

Stock# 46971041

Used- Steel-Pro Pressure Tank, Approximate 6300 Gallons, 304L Stainless Steel, Vertical. Approximate 76" diameter x 320" straight side, dished top and bottom. Internal rated 30/-10 psi at -20 to 300 degrees F. Top entering Cleveland agitator, model BHD2M-5, serial# 12165-04, approximate 4" diameter shaft with multiple turbines and a mechanical seal, driven by a 40hp, 3/60/460 volt, 1775 rpm motor. Side wall baffles, top and side bottom man way, center bottom outlet. Mounted on 4 carbon steel legs. National Board# 1361, serial# 17977C, built 2007.

Stock# 46971042

Used- Steel-Pro Pressure Tank, Approximate 6300 Gallons, 304L Stainless Steel, Vertical. Approximate 76" diameter x 320" straight side, dished top and bottom. Internal rated 30/-10 psi at -20 to 300 degrees F. Top entering Cleveland agitator, model BHD2M-5, serial# 12165-01, approximate 4" diameter shaft with multiple turbines and a mechanical seal, driven by a 40hp, 3/60/460 volt, 1775 rpm motor. Side wall baffles, top and side bottom man way, center bottom outlet. Mounted on 4 carbon steel legs. National Board# 1360, serial# 17977B, built 2007.

Stock# 46971043

Used- Steel-Pro Pressure Tank, Approximate 6300 Gallons, 304L Stainless Steel, Vertical. Approximate 76" diameter x 320" straight side, dished top and bottom. Internal rated 30/-10 psi at -20 to 300 degrees F. Top entering Cleveland agitator, model BHD2M-5, serial# 12165-02, approximate 4" diameter shaft with multiple turbines and a mechanical seal, driven by a 40hp, 3/60/460 volt, 1775 rpm motor. Side wall baffles, top and side bottom man way, center bottom outlet. Mounted on 4 carbon steel legs. National Board# 1359, serial# 17977A, built 2007.

Stock# 46971044

Used- Steel-Pro Pressure Tank, Approximate 6300 Gallons, 304L Stainless Steel, Vertical. Approximate 76" diameter x 320" straight side, dished top and bottom. Internal rated 30/-10 psi at -20 to 300 degrees F. Top entering Cleveland agitator, model BHD2M-5, serial# 12165-03, approximate 4" diameter shaft with multiple turbines and a mechanical seal, driven by a 40hp, 3/60/460 volt, 1775 rpm motor. Side wall baffles, top and side bottom man way, center bottom outlet. Mounted on 4 carbon steel legs. National Board# 1362, serial# 17977D, built 2007.

Stock# 48976002

Used- Metal Equipment Company Tank, 6,500 Gallon, 304 Stainless Steel, Vertical. 96" diameter x 198" straight side, coned top, flat bottom. 24" wide x 360 degree side bottom exterior dimple jacket rated 50 psi at 150 degrees F. Openings top 1", 2", 3", (2) 4", side 20" man way with cover, 4". 4" Off center bottom outlet. Serial # 83-3-22-5676, built 1983. Jacket certified by WM. A. Schmidt & Sons, Serial # E3686, National Board # 1207. Built 1983.

Stock# 48125038

Used- Kells Jacketed Tank, Approximate 25,000 Liter (6604 Gallon), Stainless Steel, Vertical. Internal approximately 2750mm diameter X 3540mm straight side. Welded Dish Top & Bottom Heads. Internal rated (Atmospheric) at -20 Degree F to 100 Degree F. Includes stainless steel jacket on straight side. Sump discharge.

Stock# 46062009

Used- Tank, 6,800 Gallon, Stainless Steel. Approximate 12' diameter x 8' straight side with an approximately 24" deep cone. Coned bottom with a 5" center outlet. Mounted on (5) carbon steel I beam legs. Open top with agitator bridge.(4) internal baffles.

Stock# 48370006

Used- Bishopric Products Co. Jacketed Tank, 12,000 Gallon, 304 Stainless Steel, Vertical. 12'6" diameter x 12' straight side. Dish top, coned bottom. Dimple jacket on 7' bottom side wall and bottom cone, rated 150 psi at 400 deg F. Top entering Lightnin agitator, Model 85S15, ratio 32:1, output 56-37 rpm. 3-1/2" diameter shaft with a 6 blade retreat curve blade, driven by an approximate 15 hp motor. (4) Bottom and (4) side wall baffles, internal ladder, top spray ring with (4) spray balls. Openings: top 3", 4", 6", 10", 14", 16", approximate 14" drive, 18" x 24" manway with a 2 piece hinged cover; approximate 4" and 10" bottom outlets. (8) Side lug mounts. Built 1982.

Stock# 48370007

Used- Bishopric Products Co. Jacketed Tank, 12,000 Gallon, 304 Stainless Steel, Vertical. 12'6" diameter x 12' straight side. Dish top, coned bottom. Dimple jacket on 7' bottom side wall and bottom cone, rated 150 psi at 400 deg F. Top entering Lightnin agitator, Model 85S15, ratio 32:1, output 56-37 rpm. 3-1/2" diameter shaft with a 6 blade retreat curve blade, driven by an approximate 15 hp motor. (4) Bottom and (4) side wall baffles, internal ladder, top spray ring with (4) spray balls. Openings: top 3", 4", 6", 10", 14", 16", approximate 14" drive, 18" x 24" manway with a 2 piece hinged cover; approximate 4" and 10" bottom outlets. (8) Side lug mounts. Built 1982.

Stock# 47018002

Used- Walker 12,000 Gallon Jacketed Agitated Stainless Steel Tank. Jacket area 168 square feet. Design pressure 150 psig. 10'-10" I.D., 20'-6" tall, 11'-6" O.D. Mfg. 1996.

Stock# 47018003

Used- Walker 12,000 Gallon Jacketed Agitated Stainless Steel Tank. Jacket area 168 square feet. Design pressure 150 psig. 10'-10" I.D., 20'-6" tall, 11'-6" O.D. Mfg. 1996.

Stock# 11059133

Used-Approximately 13,000 Gallon Stainless Steel storage tank. 12'6" diameter x 13' T/T. Unit has (1) turn of internal coil. Cone bottom and cone top. Approximately 13'6" OD x 20' OAH.

Stock# 49564096

Used- Feldmeier Receiver Tank, Approximate 13,000 Gallon, 316L Stainless Steel, Vertical. Approximately 144" diameter x 162" straight side, dished top and bottom heads. Internal rated 45 psi/FV at 250 degrees F. Openings: 18" top manway, (1) 4", (5) 3", (1) 2", (2) 1-1/2". 6" Bottom outlet. Mounted on (6) legs. National board# 5477, Serial# E-196-01, Built 2001.

Stock# 49564097

Used- Feldmeier Receiver Tank, Approximate 13,000 Gallon, 316L Stainless Steel, Vertical. Approximately 144" diameter x 162" straight side, dished top and bottom heads. Internal rated 45 psi/FV at 250 degrees F. Openings: 18" top manway, (1) 4", (5) 3", (1) 2", (2) 1-1/2". 6" Bottom outlet. Mounted on (6) legs. National board# 5478, Serial# E-197-01, Built 2001.

Stock# 11252052

Used- Trumbo Welding Fabricating 13,900 Gallon 304 Stainless Steel Mix Tank. Bottom mounted heating / cooling coils. Tanks measures 10' diameter x 23' 8" tall. Cone top and slope bottom: Includes 3" side bottom discharge, 19" side bottom manway and 15 hp bottom side agitation, 2" diameter coils, Mfg 1978.

Stock# 11059156

Used- 15,000 Gallon 304 Stainless Steel Agitated Tank. Dish bottom and top. Top manway. Equipped with Alsop Model 200- explosion proof (XP) side entering mixer. 12' diameter x 23' overall height. Last used in Guinness Brewery in sanitary application. (brewery tanks)

Stock# 11059157

Used- 15,000 Gallon 304 Stainless Steel Agitated Tank. Dish bottom and top. Top manway. Equipped with Alsop Model 200- explosion proof (XP) Side entering mixer. 12' diameter x 23' overall height. Last used in Guinness Brewery in sanitary application. (brewery tanks)

Stock# 11059159

Used- 15,000 Gallon 304 Stainless Steel Agitated Tank. Dish bottom and top. Top manway. Equipped with Alsop Model 200- explosion proof (XP) side entering mixer. 12' diameter x 23' overall height. Last used in Guinness Brewery in sanitary application. (brewery tanks)

Stock# 11059189

Used- 15,000 Gallon 304 Stainless Steel Agitated Tank. Dish Bottom and Top. Top manway. Equipped with Alsop Model 200- Explosion proof (XP) Side Entering Mixer. 12' Diameter x 23' Overall Height. Last used in Guinness Brewery in sanitary application. (brewery tanks)

Stock# 11059128

Used- Tate Metal Works 15,200 Gallon Stainless Steel Storage Tank. Approximately 12' diameter x 18' T/T. Flat bottom and cone top.

Stock# 49861001

Used-Stainless Steel Tank, 12' Diameter x 30' Deep, Rated 25,000 Gal. Capacity, Includes Vartec 2500 Series/Model B Automatic Tank Gauge,

Stock# 49861002

Used-Stainless Steel Tank, 12' Diameter x 30' Deep, Rated 25,000 Gal. Capacity, Includes Vartec Automatic Tank Gauge

Stock# 13536007

Used- Dairy Craft, Approx. 49,500 Gallon Insulated Silo Tank, 304 Stainless Steel, Vertical. 12'6" diameter x 61' tall overall. 9" Slope. Bottom sidewall dimple jacket 120 square feet, rated 150 psi at 100 degrees F. 16" x 20" Manway. 3" Outlet. Insulated sidewall 3" EPS, top head 3" fiberglass, 3" foam glass.

Stock# 14191044

Used- 65,000 Gallon Horizontal Carbon Steel Pressure Vessel (bullet tank). Built by Eaton Metal Products. Rated 300 psi at 120F. Shell 1.47" thick, Heads 1.46" thick. Built 1990. Previous Use: Ammonia storage. Shipping dimensions - 13' wide x 17' high x 75 OAL, Weight 196,000 lbs.

Stock# 14191045

Used- 65,000 Gallon Horizontal Carbon Steel Pressure Vessel (bullet tank). Built by Eaton Metal Products. Rated 300 psi at 120 degree F. Shell 1.47" thick, Heads 1.46" thick. Built 1990. Previous Use: Ammonia storage. Shipping dimensions - 13' wide x 17' high x 75 OAL. Weight 196,000 pounds.