Used Erector, Packer, and Sealer Case Packers

Stock# 70053038

Used- Skinetta Pac System Case Packaging Machine, Type CP145. Servo driven, erects shipper case from flat, side loading, with 3M case sealers tape heads. 3/60/480V, with New Jersey print and apply case labeler, Model 400R with Zebra printer, Argus vision system and conveyor, Skinetta Serial # 144.03, Built 2003.

Stock# 70053039

Used- Skinetta Pac System Case Packaging Machine, Type CP145. Servo driven, erects shipper case from flat, side loading, with 3M case sealers tape heads. 3/60/480V, Serial # 145100.2, Built 2002.

Stock# 70053040

Used- Skinetta Top Loading Case Erector Packer, Model CP 150. Servo driven loading head, with powered case feeder and case erector. Integrated top and bottom case taper. Includes controls. 3/60/480 Volt. Serial# 300133, built 2004.

Stock# 70053060

Used- IMA High Speed Side Loading Case Packer, Model 3738BA. Designed to stack and load loose or bundled cartons, belt carton/bundle feeder, up stack design with push arm, dual tape heads, case overturn table with Allen Bradley controls. 480 volt, Serial # 4052, Built 2000.

Stock# 71383002

Used- Combi Model HL-E2000 Automatic Case Erector Packer and Sealer for Cartoned Product. Operates at speeds of up to 9 cases per minute. Machine has maximum case size ranges of 8.5" to 16.5" length; 4.75" to 12.25" width; and 4" to 19.5" height. Currently set up to load cartons into cases in as a single push with 3 stacks of 8 cartons for a total of 24 cartons per case, carton infeed and upstack collation is built for a maximum 4" wide carton as conveyed on infeed . Utilizes 3m taping heads for top and bottom case sealing. Has Allen Bradley SLC 5/03 PLC controls (upgrades available upon request). System consists of Combi E-3500 case erector with HL downstack loader and Combi TBS100FC case sealer. LH cases 2" tape heads. 3 amps. 3/60/230V. Machine may be retooled and set to your size case. Engineered quote subject to receipt of carton and case samples.

Stock# 72535003

Used- IMA (BFB) Model CP18BA Automatic Case Erector Packer and Sealer. Capable of speeds up to 8 cases per minute (depending on application and collation). Has a case size range: 220mm - 600mm (8.66 - 23.62") length x 120mm - 400mm (4.72 - 15.75") width x 120mm - 350mm (4.72" - 13.78") depth. Seal bar 22" long. Has pre-folded leaflet inserter, tape sealing head, Optel OP300 vision system. Allen Bradley Compactlogix L35E PLC, A/B panelview plus 1000 HMI, A/B powerflex 40. 3/60480 Volt. Last used in pharmaceutical packaging operation.

Stock# 72536001

Used- IMA Robotic Top-Load Casepacking and Palletizing System, Model Vertical Cartopallet HS. System is designed to load products into cases from the case magazine and palletizing onto 31.5" x 48" and/or 40" x 48" pallets. Unit is capable of speeds up to 15 cases per minute. Has a Fanuc 2-X axis robot, model M-710iC and top and bottom tape case sealer.

Stock# 71482004

Used- MAB (MG America) Model B88 Automatic Case Erector Packer And Sealer For Cartons. Speeds from 3-12 cases per minute depending on application. Carton size range of 70mm-340mm (2.5"-13.5") length; 25mm-490mm (1"-19") width; 8mm-310mm (.5"-12") height. Case size range of 180mm-500mm (7"-19.5") length; 120mm - 350mm (4.7"-13.8") width; 100mm - 320mm (4"-12.5") height. Equipped with a 68" long x 10" wide product infeed conveyor belt with downstacking carton collation. Tape case sealing. Last used in cosmetic fragrance packaging. GE Fanuc Series 90-30 PLC controls and AB VFD. 3/60/208V.

Stock# 71860001

Used- Pester Model TLC-2 Automatic Top Load Robotic Case Packer. Pharma spec. Capable of speeds up to 20 cases per minute. Has a case size range: 200mm - 450mm (length) x 140mm - 350mm (width) x 100mm - 350mm (height). Product size range: 20mm - 440mm (length) x 20mm - 200mm (width) x 60mm - 250mm (height). Has tier sheet dispenser, Tape bottom seal, Domino print and apply labeler along with RFID detection and reject. Includes Kuka Model robotic placer. Machine # 12141A. O Supply voltage at 3x480V+PE 50/60 Hz. Power consumption at 13,6 kW / 19,7A. Machine can be set to size for additional cost subject to receipt of samples. Has a KUKA Robotic Arm (with seven servo motors on it). 2 WAGO PLCs on it. HMI: Micro Innovation AG. (Type-XVS-430-10MPI-1-1AC)

Stock# 72632003

Used- Rockford Midland Bottom Load Hot Melt Glue Case Packer, Model 813 BL. Machine is capable of speeds up to 30 cases/trays per minute. Includes Nordson ProBlue hot melt glue system with hoses and application nozzles. 3/60/480V.