Used Plastic Pulverizers

Stock# 42275052

Used- Costarelli Fully Automatic Agglomeration System, Type D-1500. Can be used as semi-automatic with a capacity1.3-2.5 tonnes/hr. (1300 to 2500 kgs./hr.) depending on material and moisture. Consisting of: (1) Loading belt conveyer, (1) Feed hopper, (1) Costarelli agglomerator, 58.5" (1500 mm) barrel diameter length. 560 kw/Hp 730 installed power 65% used average Steel cylinder case with inspecting door, Side opening panel for inspection and replacing blades .Power switchboard, Exchangeable inner steel liner for barrel Oleo-dynamic power station 0,75 kw with electro-valve opening, Lower opening for cleaning operations, upper lid, two inspection windows (one can be opened), internal protection grid, 1,1 kw engine, (1) Hub temperature control system, Grease lubricated drive bearings, 0,4 kw ventilator for belt cooling with air conveyor, Steam vacuum vent 4 kW. (1) Discharging hopper complete with 7.8" (200 mm) diam. diagonal auger for agglomerated material 1,5 kW drive. 44.9" x 78" (1150 mm. x 2000 mm). Material discharging at 32.4" (830 mm) from ground. (1) Electrical control cabinet. Complete with operating infrastructure. Mfg. 2008. Suitable for film, foam, fibers.

Stock# 50269003

Used- Mikro Pulverizer Hammer Mill, Model 2DH, Carbon Steel. Handless up to 3" product depending on hardness. Approximate with (5) rows of 1" wide x 3/16" thick swinging hammers. Feed hopper with a dual screw feed driven by a 1/2 hp motor. Mill driven by a 15 hp, 3/60/460 volt, 3535 rpm motor. Maximum rotor speed approximate 6,900 rpm, air volume approximate 247 cubic feet a minute. Includes bottom screens. Mounted on a carbon steel frame. Serial # 83J105.

Stock# 47570005

Used- Reduction Engineering Pulverizer Mill, Model 75. Driven by a 30 hp motor. Includes a Whitlock vacuum receiver, 2.5 hp vibratory feed, cyclone collector, 30" Midwestern screen, 2 deck. Unitized on a base with control panel. Serial # 253.

Stock# 14022008

Used- Alpine Pulverizer Model SUX 800. Feed opening 200 mm. Rotor width 92 mm. Rotor diameter 804 mm. 30 kW drive.

Stock# 44846001

Used- Herbold PU500 Pulverizer. Carbon Steel. Driven by a 75 hp, 3/50/415 volt motor. Capacity: 150-1000 kg/hour.

Stock# 42275051

Used- Herbold GmbH HV50 Disk Type Agglomeration System. With a capacity of 1320 pounds/hour (600 Kg/hour). PE, PP, PS, PA, PET consisting of: (1) GUIX shear 31.2" x 23.4" (800 mm x 600 mm), (1) Ripper twin roll shredder, opening 31.2" x 17.6" (800 mm x 450 mm). 11.25 hp / 7.5 Kw motor. (1) Sorting table 982 x (3000 mm) long x 52" (1600 mm) width. (1) Drum 65" (2000 mm) long, 0.9" (25 mm) diameter holes. (1) Herbold belt conveyer includes metal detector, Type S5, 114" (3500 mm) long x 13" (400 mm) width. (1) Mixing silo, capacity 17600 pounds (8000 kgs). (1) Herbold HV50 agglomerator, 165 hp / 110 Kw motor. (1) Stainless steel cyclone for cooling. (1) Herbold SMS50 Granulator, 55.5 hp / 37 Kw motor, (1) Zigzag fines separator, (1) Stainless cyclone 8.6" (220 mm) diameter x 13 (4000 mm) high for filling big bags. Complete with controls and further infrastructure. New year 2013.