Used 1000-4999 Gallon Stainless Steel Tanks

Stock# 53147036

Used DCI 1,000 Gallon Stainless steel jacketed tank.Three zone dimple jacket covered by insulation (jacket leaks on outside). Tank measures 90" diameter X 40" straight side with cone bottom. Includes 20" top manway. Complete with heavy-duty scrape agitator driven by 2 HP, 230/460 V, 1750 rpm Baldor motor through SEW Eurodrive. 2" center bottom outlet with tri-clamp fitting. Mounted on four (4) stainless steel pipe legs. Includes side-mounted ladder. Previously used in an Research & Development facility.

Stock# 53304011

Used Stainless Steel Jacketed Mix Tank, Approximate 1000 Gallon.

Stock# 53328001

Used Agitated Tank, Approximately 1,000 Gallon, Stainless Steel, Vertical. Approximately 60" diameter x 96" straight side. Dished top, slight coned bottom. Top offset mounted Fusion Fluid agitator, Model PG-8P, Serial# 140291-1. Dual 3-blade turbine, approximate 1-1/2" diameter x 76" long shaft, driven by 3hp, 3/60/208-230/460 volt, 1740rpm motor. Openings top: 16" manway with cover, 3" for agitator, (2) 2", 3/4", Side: (2) 1/2" with ball valves, 1-1/4" with valve. 2" Center bottom outlet with 12" discharge height. Mounted on (3) stainless steel legs. No manufacturers tag.

Stock# 53328002

Used 1,000 Gallon Stainless Steel Agitated Tank, Vertical. Approximately 60" diameter x 96" straight side. Dished top, slight coned bottom. Top offset mounted Fusion Fluid agitator, Model PG-8P, Serial# 140291-2. Dual 3 blade turbine, approximate 1-1/2" diameter x 76" long shaft, driven by 3hp, 3/60/208-230/460 volt, 1740rpm motor. Openings top: 16" manway with cover, 3" for agitator, (2) 2", 3/4", Side: (2) 1/2" with ball valves, 1-1/4" with valve. 2" Center bottom outlet with 12" discharge height. Mounted on (3) stainless steel legs. No manufacturers tag.

Stock# 53267018

Used Circleville Metal Works Inc. approximately 1050 gallon 304 stainless steel vertical tank. 66" diameter X 72" high straight side. Internal rated ATMOS @ 200 F. S/N CMW-936. Dished top and bottom. Top fittings: 20" manway, (1) 1.5", (1) 4", and (1) 10". (1) 1.5" side middle inlet and (1) 1" and (1) 1.5" side bottom outlets. 2" center bottom drain. Mounted on (4) legs giving 22" clearance. Built 1975.

Stock# 53423003

Used Algor Open-Top Tank, 4000 Liter Capacity (Approximate 1057 gallons). Stainless steel; side-bottom manway; Floating lid. OAD: 7'8" H x 5'5" D.

Stock# 52555001

Used Criveller Ganimede Wine Fermentation Tank, 5.5 Ton Capacity, 1,200 Gallon, 304 Stainless Steel, Vertical. Approximate 68" diameter x 106" straight side. Coned top and bottom. Internal funneled diaphragm cone, (2) 2" side bypass stations. Approximate 40" wide section top dimple jacket. Openings top: 15.75" manway, side: 17" x 12" manway. (5) 2" side openings, 3" Center bottom outlet with valve, approximate 14" discharge height. Mounted on (4) stainless steel legs. Serial# 791-1. Reported new never installed. Approx. overall height is 15'2".

Stock# 52555002

Used Criveller Ganimede 5.5 Ton Capacity Wine Fermentation Tank, 1,200 Gallon, 304 Stainless Steel, Vertical. Approximate 68" diameter x 106" straight side. Coned top and coned bottom. Internal funneled diaphragm cone, (2) 2" side bypass stations. Approximate 40" wide section top dimple jacket. Openings top: 15.75" manway, side: 17" x 12" manway, (5) 2" side outlets, 3" Center bottom outlet, approximate 14" discharge height. Mounted on (4) stainless steel legs. Serial# 791-2. Reported new never installed. Approx. overall height is 15'2".

Stock# 54052001

Unused- Preferred Stainless 1,200 Gallon Tank. 316L Stainless steel contact areas, 304 Stainless Steel exterior. 74" internal diameter x 64" Straight side. Vertical, dish top, sloped bottom. Rated Atmospheric pressure. Top manway cover; Flanged top; (2) lifting lugs; (2) spray ball assemblies. Mounted on (4) stainless steel legs. Serial# 802-1, Built 2020.

Stock# 53880001

Unused- Portland Kettle Works Vessel. Rated 40 BBL/ 1260 Gallon, 304 Stainless steel. 60" Diameter x approximate 92" straight side. Dished top and bottom. Bottom side entering AF3 3-blade hydrofoil agitator, driven by a 1HP, 3/60/230/460 volt, 1750 rpm motor, 13" diameter impeller. Opening top: 18" manway, (3) 4", (3) 2", sidewall: (10) 2", bottom side: (2) 2". 4" Center bottom outlet, approximate 18" discharge height. Mounted on (5) legs.

Stock# 53147075

Used JV Northwest Single-Wall Tank, 1,300-gallon. Constructed of 316 stainless steel. 78" diameter x 60" straight side; flat top, dish bottom design; Bottom head includes a 2" diameter center bottom outlet; Top ports include (1) 2" diameter tri-clamp fitting; Tank is mounted on (4) stainless steel legs and includes a bridge mount for agitation or other top-mounted equipment; Shell Thickness: 2.3mm/0.090 inches. Previously used in cosmetics applications.

Stock# 53147076

Used 1300 Gallon JV Northwest Single-Wall Tank. Constructed of 316 stainless steel. 78" diameter x 60" straight side; flat top, dish bottom design; Bottom head includes a 2" diameter center bottom outlet; Top ports include (1) 2" diameter tri-clamp fitting; Tank is mounted on (4) stainless steel legs and includes a bridge mount for agitation or other top-mounted equipment; Shell Thickness: 2.3mm/0.090 inches. Previously used in cosmetics applications.

Stock# 53147077

Used 316 Stainless Steel, Vertical JV Northwest Single-Wall Tank, 1,300-gallon capacity. 78" diameter x 60" straight side; flat top, dish bottom design; Bottom head includes a 2" diameter center bottom outlet; Top ports include (1) 2" diameter tri-clamp fitting; Tank is mounted on (4) stainless steel legs and includes a bridge mount for agitation or other top-mounted equipment; Shell Thickness: 2.3mm/0.090 inches. Previously used in cosmetics applications.

Stock# 53121005

Used Stainless Steel Tank, Approximate 1,300 Gallon, Stainless Steel, Vertical. Approximate 80" diameter x 60" straight side. Flat top with cover, Conical bottom. (2) 12" x 7" Bottom outlets. Mounted on (4) legs.

Stock# 53126002

Used JV Northwest 1500 Gallon Stainless Steel Vertical Ozone Reactor Tank. Approximate 4' diameter x 16' straight side. On (4) legs. Dish top and bottom, side-bottom manway entrance. Approximate 2" center bottom outlet. Previously used for poultry water reuse on food products.

Stock# 53126003

Used JV Northwest Stainless Steel 1500 Gallon Vertical Ozone Reactor Tank. Approximate 4' diameter x 16' straight side. On (4) legs. Dish top and bottom, side-bottom manway entrance. Approximate 2" center bottom outlet. Previously used for poultry water reuse on food products.

Stock# 53126004

Used JV Northwest 1500 Gallon Stainless Steel Vertical Ozone Reactor Tank. Approximate 4' diameter x 16' straight side. On (4) legs. Dish top and bottom, side-bottom manway entrance. Approximate 2" center bottom outlet. Previously used for poultry water reuse on food products.

Stock# 53126005

Used JV Northwest Ozone Reactor Tank, 1500 Gallon, Stainless Steel, Vertical. Approximate 4' diameter x 16' straight side. On (4) legs. Dish top and bottom, side-bottom manway entrance. Approximate 2" center bottom outlet. Previously used for poultry water reuse on food products.

Stock# 53126006

Used JV Northwest Vertical 1500 Gallon Stainless Steel Ozone Reactor Tank. Approximate 4' diameter x 16' straight side. On (4) legs. Dish top and bottom, side-bottom manway entrance. Approximate 2" center bottom outlet. Previously used for poultry water reuse on food products.

Stock# 53126007

Used JV Northwest Vertical Stainless Steel 1500 Gallon Ozone Reactor Tank. Approximate 4' diameter x 16' straight side. On (4) legs. Dish top and bottom, side-bottom manway entrance. Approximate 2" center bottom outlet. Previously used for poultry water reuse on food products.

Stock# 53126008

Used JV Northwest 4' Diameter 1500 Gallon Stainless Steel Vertical Ozone Reactor Tank. Approximate 4' diameter x 16' straight side. On (4) legs. Dish top and bottom, side-bottom manway entrance. Approximate 2" center bottom outlet. Previously used for poultry water reuse on food products.

Stock# 53126009

Used JV Northwest Stainless Steel 1500 Gallon 4' Diameter Vertical Ozone Reactor Tank. Approximate 4' diameter x 16' straight side. On (4) legs. Dish top and bottom, side-bottom manway entrance. Approximate 2" center bottom outlet. Previously used for poultry water reuse on food products.

Stock# 53126010

Used 4' Diameter JV Northwest Stainless Steel 1500 Gallon Ozone Reactor Tank, Vertical. Approximate 4' diameter x 16' straight side. On (4) legs. Dish top and bottom, side-bottom manway entrance. Approximate 2" center bottom outlet. Previously used for poultry water reuse on food products.

Stock# 11585092

Used Approximately 1500 Gallon Vertical Stainless Steel Food Grade Mix Tank. Approximately 72" diameter X 93" straight side. Stainless steel internal. Internal coil 1 turn 1.5". Top mounted agitator (requires drive) and baffle. Unit is insulated and sheathed. 5 legs. Dished top with manway. Side bottom outlet 1.5".

Stock# 13140151

Used Cherry Burrell Approximately 1500 Gallon 304 Stainless Steel Jacketed Processor. Vertical, Dished top Sloping bottom. 80" diameter X 80" high straight side. Model EPD. Equipped with multi-zone panel coil jacket on sides and bottom head. Jacket is insulated and covered with stainless steel sheathing. Top Openings: 20" manway, (3) 1 1/2", (1) 2", and (1) 3/4". 3" side bottom drain with valve. Has spray-balls and baffle. Equipped with wide bottom and side sweep agitator, driven thru a Hub City, model 4510 geardrive with a 150:1 ratio, powered by a 5HP 3/60/230-460 volt motor. Has (2) thermowells. Mounted on stainless steel legs and equipped with stainless steel ladder. Previously used in Milk Production.

Stock# 52664001

Used Bekadex-Spomasz Approximately 1,500 Gallon 304 Stainless Steel Tank, Vertical. Approximate 74" diameter x 78" straight side. Flat top with (2) piece bolt-on cover, conical bottom. Dimple Jacket 36" tall, 7" from bottom straight side, no rating. Openings top: 24" manway with cover, 2", 1", side: (2) 1-1/2". 2" Center bottom outlet (approximate 28" discharge height), 1-1/2" bottom. (2) Spray balls. Mounted on 3 legs.

Stock# 52664002

Used Bekadex-Spomasz Tank, Approximately 1,500 Gallon, 304 Stainless Steel, Vertical. Approximate 74" diameter x 78" straight side. Flat top with (2) piece bolt-on cover, conical bottom. Dimple Jacket 36" tall, 9" from bottom straight side, no rating. Openings top: 24" manway with cover, 3", 1-1/2", side: (2) 1-1/2". 2" Center bottom outlet (approximate 28" discharge height). (2) Spray balls. Mounted on 3 legs.

Stock# 53147092

Used 1,500 Gallon Cherry-Burrell Vertical Stainless Steel Tank Side Manway, Spray Bar, Polished Interior. Tank measures 5'4" diameter x 7' straight side with dished top and bottom heads. Features a 3" diameter center top opening reduced to 1.5", one additional 3" side top nozzle, and a 3" center bottom outlet with a secondary 2" side bottom nozzle. Includes a 20" x 16" oval side manway with an inward-swinging cover secured by a swing latch. Interior finish is polished stainless steel with clean seams and integral support welds. The tank is mounted on four stainless steel legs with adjustable footpads and includes a welded agitator mount (no agitation installed). External piping includes a mounted spray bar along one side.

Stock# 53147093

Used 1,500 Gallon Cherry-Burrell Vertical Stainless Steel Tank Side Manway, Spray Ball, Lifting Lugs. Measures 5'4" diameter x 7' straight side with dished top and bottom heads. Constructed from polished stainless steel, the tank features a 3" diameter center top opening tapered to 1.5", one additional 3" side top nozzle, a 3" center bottom outlet, and a 2" side bottom outlet. Includes a 20" x 16" oval side manway with inward-swinging cover secured by a swing latch. Mounted on four stainless steel legs with adjustable footpads, and fitted with a welded agitator mount (no agitator included), internal spray ball line, top nozzles, and lifting lugs.

Stock# 53264023

Used Fulton Engineered Specialties 1500 Gallon Jacketed Tank, 304 Stainless Steel, With 20 HP Mixer. High pressure jacket rated : 150 psi @ 428 deg.f. Interior dimensions: 44'' diameter x 96'' straight side, dish bottom. Center discharge: 6'' flanged. Falk heavy duty top entry mixer, motor: 20 hp, 230/460 volt, 1740 rpm. Final output rpm: 190 approximately. Serial# 2811, National board# 1022, built 2013.

Stock# 53749003

Used Bendel Storage Tank, 1,500 Gallon Capacity, 304 Stainless Steel, Vertical. Slight Dish top, Flat bottom. 68" diameter x 94" straight side. Openings Top: 6", 2", 1", 18" side manway, no cover, 1" side bottom outlet with 8" discharge height. Serial# 533333. UL Listed Aboveground tank for flammable liquids.

Stock# 53458009

Used Bavarian Brewery Technologies Brew Tank, Model K30, 42.2 Gross Volume BBL Capacity, Approximately 1540 gallon capacity, 304 Stainless Steel, Vertical. Approximately 72" diameter x 80" straight side. Dished top, flat bottom. Sidewall jacketed with 15psi max steam jacket. Openings Top: 16" manway with cover, 10", 1-1/2", Side: 5" with sight glass, 2" with sight glass, 1-1/2", 2" side bottom outlet with 6" discharge height. leg mounted. Serial# 0220.

Stock# 53701001

Unused- Stainless Steel Flour Silo Receiving and Feed System to include 1,600 gallon stainless steel vessel with Donaldson Torit Model TD-142 top mounted dust collector, Schick S209-2 valve body pneumatic actuator, and bottom mounted stainless steel rotary airlock valve. Vessel manufactured by Sanitary Stainless Welding, Inc., measures 5' diameter X 10' straight side 3'11" high cone bottom with 12" diameter flanged discharge, connected to Schick 12" diameter stainless steel rotary airlock valve. Domed Top head includes 24" diameter flange connection for dust collector and 6" diameter tri-clover port. Mounted on stainless steel pipe legs with footpads. Never put into production.

Stock# 53701002

Unused- Industrial Flour Silo and Feed System, Stainless Steel. To include 1,600 gallon stainless steel vessel with Donaldson Torit top mounted dust collection and bottom mounted Schick rotary airlock valve. Vessel manufactured by Sanitary Stainless Welding, Inc., measures 5' diameter X 10' straight side 3'11" high cone bottom with 12" diameter flanged discharge, connected to Schick 12" diameter stainless steel rotary airlock valve. Domed Top head includes 24" diameter flange connection for dust collector and 6" diameter tri-clover port. Mounted on stainless steel pipe legs with footpads. Never put into production.

Stock# 53701003

Unused- High-Performance Flour Processing Silo & Feed System to include 1,600 gallon stainless steel vessel with Donaldson Torit top mounted dust collection and bottom mounted Schick rotary airlock valve. Vessel manufactured by Sanitary Stainless Welding, Inc., measures 5' diameter X 10' straight side 3'11" high cone bottom with 12" diameter flanged discharge, connected to Schick 12" diameter stainless steel rotary airlock valve. Domed Top head includes 24" diameter flange connection for dust collector and 6" diameter tri-clover port. Mounted on stainless steel pipe legs with footpads. Never put into production.

Stock# 53701004

Unused- Industrial Premium Stainless Steel Flour Silo and Feed System to include 1,600 gallon stainless steel vessel with Donaldson Torit top mounted dust collection and bottom mounted Schick rotary airlock valve. Vessel manufactured by Sanitary Stainless Welding, Inc., measures 5' diameter X 10' straight side 3'11" high cone bottom with 12" diameter flanged discharge, connected to Schick 12" diameter stainless steel rotary airlock valve. Domed Top head includes 24" diameter flange connection for dust collector and 6" diameter tri-clover port. Mounted on stainless steel pipe legs with footpads. Never put into production.

Stock# 53701005

Unused- Advanced Flour Silo & Feed System to include 1,600 gallon stainless steel vessel with Donaldson Torit top mounted dust collection and bottom mounted Schick rotary airlock valve. Vessel manufactured by Sanitary Stainless Welding, Inc., measures 5' diameter X 10' straight side 3'11" high cone bottom with 12" diameter flanged discharge, connected to Schick 12" diameter stainless steel rotary airlock valve. Domed Top head includes 24" diameter flange connection for dust collector and 6" diameter tri-clover port. Mounted on stainless steel pipe legs with footpads. Never put into production.

Stock# 53458008

Used Brew Tank, Model WP-30BBL. 30 BBL Capacity, approximately 1700 gallons capacity. 304 Stainless Steel. Approximately 82" diameter x 66" straight side. Dished Top, Slight Cone Bottom. Openings Top: 20" manway, 4", 3", Side: 1-1/2", 1", (2) 1-1/2" side bottom, 2" center bottom outlet, with 9" discharge height. Mounted on (4) stainless steel legs. Serial# WP-498-30BBL.

Stock# 53066002

Used Stainless Steel Sanitary Tank, 1750 Gallon. 78" diameter; 86" straight side; slope bottom; 3" side bottom opening with welded reducer to 2" female NPT connection at floor height; 3" bottom side opening with removable plug and flanged connection at 12" from bottom; 11" wide welded central bridge; 2" SS angle iron tank brim; half loose fitting cover; mounted on (4) legs.

Stock# 14114042

Used 1850 Gallon Waukesha Cherry Burrell 316 Stainless Steel Tank. Interior Dimensions: 80" x 74" straight side. Center discharge: 4" tri-clamp. Side ports: 2" and 1/5". Top manway lid. Distance from discharge to floor is 42". (4) adjustable stainless steel legs with pads. Serial# H-486-95.

Stock# 10128086

Used 1,900 Gallon JV Northwest Stainless Steel Jacketed Tank with 3 HP Agitator 45 PSI, UM Stamped, Serial # 13847, Built 1997. Jacket in two sections is rated for 45 PSI @ 400 degree F. Tank is 78" diameter x 84" straight side. Bottom and 1/3 of the straight side jacketed. Tank has bottom mounted 3 hp agitator, 230/460 vac 3 ph power required. Top has 20" round manway with hinged lid, 10" vent pipe, one 6" tri clamp, two 3" tri clamp, and one 2" tri clamp. Jackets have two threaded connections each. Bottom has 4" 90 degree tri clamp elbow for the discharge. Side has .75" coupling with probe. Unit has four carbon steel legs.

Stock# 10151501

Used Alloy Fabricators Approximately 1,950 Gallon Mix Tank with Internal Coils. 304 Stainless Steel Jacketed. 78" diameter x 81" straight side; Dished top and bottom; Internal rated 15/FV at 335 degrees F; Jacket rated 44 psi at 335 degrees F; Coils rated 44 psi at 335 degrees F; (4) side wall baffles; 7.5 hp axial type agitator, 304 stainless steel, Foam breaker at top - 2 blade, 51" dia; dual hub with 3 blades - upper 50" dia; lower 30" dia, 18" dia. 2 blade radial flow at bottom. Serial # 1-151A; Built 1991.

Stock# 10128084

Used 2,000 Gallon SS Vertical Jacketed Tank Cone Bottom, Dished Top, Manway, Modern Brewing. Tank is 72" ID x 99.5" straight side. Side has 20" x 16" eliptical manway, one 3/4" tri clamp nozzle, two 3/4" copper pipes to the jacket. Dished top has one 2" tri clamp nozzle and one 3/4" tri clamp nozzle to a spray ball. Cone has two 1-1/2" tri clamp nozzle. Cone is 35" length. Top has four lift lugs. Manufactured by Modern Brewing & Design Inc.

Stock# 10128085

Used 2,000 Gallon Santa Rosa Stainless Steel Jacketed Vertical Tank 20 PSI MAWP, Three-Zone. Overall height is 240" tall on four legs. Main shell is 66" OD x 125" straight side. Long bottom cone has two 1" threaded jacket fittings and one 2" tri clamp bottom fitting. Side has four 1" threaded fittings for the jacket, one 3" tri clamp, one 2" tri clamp, one 16" x 20" elliptical manway and two 1" threaded couplings for probes. Top has 3- 2" tri clamp fittings. Cone length 53" long.

Stock# 10128087

Used 2,000 Gallon JV Northwest Stainless Steel Jacketed Vertical Tank Cone Bottom, Tri-Clamp Fittings. Overall height is 165" tall on four legs. Main shell is 80" OD x 76" straight side. Long bottom cone has one 1" threaded jacket fittings, 4" tri clamp fitting and one 2" tri clamp bottom fitting. Side has one 1" threaded fittings for the jacket, one 4" tri clamp and one 16" x 22" elliptical manway. Top has 2- 2" tri clamp fittings and one 3" tri clamp fitting. Cone length 69" long.

Stock# 11059329

Used 2000 Gallon Hastelloy C-276 mix tank. Dish top and bottom. Built By Addison Fab. 6' dia. x 9' T/T. Lightnin 3/4 HP mixer, 208-220/440 volt. Lug mounted. Rated 10" WC @ 250 Deg.F. Alloy

Stock# 52551005

Used International Production Specialists Mix Tank, Approximately 2050 Gallons, T-304L Stainless Steel, Vertical. Approximately 74" Diameter x 110" Straight side. Flat top, sloped bottom. Internal 1 psi / -0.5 psi at 250 degrees F. Design specific gravity 1. Opening top: 6", 4", 3", (2) 2", 1-1/2", Side: approximately 3-1/2", 20" manway with bolt on cover. 6" Side bottom outlet. Base mounted. Built 2014. Distillery Tank

Stock# 10151489

Used Alloy Fabricators Approximately 2,200 Gallon 316L Stainless Steel Jacketed Mix Tank. 90" diameter x 64" straight side; Dished top and bottom; Internal rated 15 psi at 120 degrees F; 304 stainless steel half-pipe jacket rated 85 psi at 120 degrees F; 15 hp axial type agitator, 316 stainless steel, three hub with 2 blades each, 39 1/2" daimeter, upper - 2 left hand; mid - 2 left hand; bottom - 2 right hand. Serial # 1-128A; Built 1991.

Stock# 10151490

Used Approximately 2,200 Gallon 316L Stainless Steel Jacketed Mix TankManufacturer: Alloy FabricatorsCapacity: 2,200 gallonsSerial: 1-130AYear: 1991Internal pressure: 15 psi @ 120FJacket pressure: 85 psi @ 120FDimensions: 84" dia. x 72" straight sideMaterial of construction: 316L stainless steelHalf-pipe jacket material: 304 stainless steelAgitator: 10 hp, 0 - 80 rpm, Axial type, 316 SS; Dual hub with 2 blades each; 35 1/2" dia.; Pro Quip model 10ZGS15BDished top, dished bottom

Stock# 10151491

Used 2,200 Gallon 316L Stainless Steel Jacketed Mix Tank, Manufactured by Alloy Fabricators. 84" diameter x 76" straight side; Dished top and bottom. Internal rated 15 psi at 120 degrees F, 304 stainless steel half-pipe jacket rated 85 psi at 120 degrees F; 15 hp axial type agitator, 316 stainless steel, three hub with 2 blades each, 39 1/2" diameter, upper - 2 left hand; mid - 2 left hand; bottom - 2 right hand. Serial # 1-131A, Built 1991.

Stock# 10151492

Used Industrial 2,200 Gallon 316L Stainless Steel Mixing Tank Half-Pipe Jacket & Axial Agitator. Made by Alloy Fabricators. 84" diameter x 76" straight side; Dished top and bottom; Internal rated 15 psi at 120 degrees F; 304 stainless steel half-pipe jacket rated 85 psi at 120 degrees F; 15 hp axial type agitator, 316 stainless steel, three hub with 2 blades each, 39 1/2" diameter, upper - 2 left hand; mid - 2 left hand; bottom - 2 right hand. Serial # 00-172A. Built 2000.

Stock# 53423001

Used Letina Stainless Steel Tank, 8500 Liter Capacity (2245 gallon). Side-bottom manway; floating lid. OAD: 11'9" H x 6'6" D. Built 2015.

Stock# 53423002

Used Letina 8500 Liter Capacity (2245 gallon) Stainless Steel Vertical Tank. Side-bottom manway. Floating lid. OAD: 11'9" H x 6'6" D. Built 2015.

Stock# 11252199

Used 2,400 Gallon Storage Tank, Stainless Steel Single Wall, measures 69" diameter X 168" high. Includes side bottom manway with bottom outlet.

Stock# 11252200

Used 304 Stainless Steel Single Wall 2,400 Gallon Storage Tank, measures 69" diameter X 168" high. Includes side bottom manway with bottom outlet.

Stock# 49479009

Used DCI 2,500 Pressure Wall Processor, Gallon Dome Top, Cone Bottom, 316l Interior. Offset Vertical Agitator. Double Sprayball. 2" Outlet. 23 Sq. Ft. Jacketed On Lower Sidewall Only. Approximately 88" Diameter X 183" High. Top Manway. Stainless Steel Legs with Adjustable Feet.

Stock# 53267072

Used Culligan Stainless Steel Media Tank, Approx. 2,500 gallon capacity. 95" diameter X 84" high straight side; Tank certified by Silvan Industries; Certified 125 PSI @ -20 to 250 degrees F. 0.437 head thickness, 0.375 shell thickness; Has 6" inlet and outlets; Has all stainless steel face pipe equipped with Bray Controls pneumatic valves; Has 3" side top relief valve and 4" blinded side bottom outlet; Equipped with stainless steel diffusers. Mounted on (4) legs. NB/SN 828846. Built 2017.

Stock# 53267101

Used ExceleTech Inc. 304 Stainless Steel Vertical Pressure Tank, Approx. 2500 Gallons. 6' diameter X 12' straight side. Internal rated 430 PSI @ 450 F. Welded hemispherical heads. 1.250" shell thickness, bottom head 1", Top head 1.375". Top fittings: 18" manway, (1) 1", (1) 2", (1) 3", and (1) 6" agitator nozzle. 20" center bottom outlet. (12) 2" side injection ports. Mounted on (4) carbon steel legs. Insulated and wrapped with sheathing. NB# 121, S/N 6377-01. Built 2001.

Stock# 52878001

Unused - Shandong HG Machinery 10,000 Liter Fermentation Tank, 2641 Gallon (85 BBL), 304 Stainless Steel, Vertical. Approximately 78.74" diameter x 137.79" straight side. Dished top, 60 degree cone bottom. Jacket approximately 14m2, test pressure 0.2MPa (29 PSI). Openings top: 102mm (4"), 89mm (3.5"), 51mm (2"), Side: 540mm x 440mm Manhole (21.25" x 17.3"), 38mm (1.5"), 19mm (.75"). 1-1/2" Side cone outlet, 818mm (32.2") discharge height. 1-1/2" Center bottom outlet, approximate 60mm (2.36") discharge height. Mounted on (4) legs. Approximate 87" x 87" x 236" tall, 3400 lb

Stock# 11059330

Used 3000 Gallon Jacketed Stainless Steel Dish Bottom Mix Tank. 8' Dia. X 7' T/T. Half Pipe Stainless Steel Jacket. 2 HP, 230/460 volt Lightnin Series 10 Mixer. 3" Center bottom outlet with valve. Has slight cone top. Mounted on legs. Last used in Health/Nutritional/Biomedical Collagen products.

Stock# 40425034

Used DCI Twin Motion Kettle, 3,000 Gallon, 316 Stainless Steel. Approximately 84" diameter x 120" straight side, dish top, cone bottom, jacketed on side and bottom cone rated 150 PSI at 200 Degrees F. Twin motion agitation with anchor agitator with bottom and sidewall scrappers, with 20 hp, 230/460 volt Nord motor drive, off set (4) tier four blade pitched turbine blade agitator with 25 hp, 230/460 volt Nord motor drive, 24" top manway, 3" bottom outlet, on 4 legs with approximately 42" discharge height, approximately 252" overall height, serial# JS3724B , national board# 6749, built 2007.

Stock# 48918014

Used Indspec, 3500 Gallon Receiver Tank, 304 Stainless Steel. Has been RCRA cleaned. Dimple jacketed, has a small leak.

Stock# 49479008

Used Feldmeier 3,000 Gallon Tank. Dome Top, Flat Bottom, Pressure Wall Processor. Top Manway. Vertical Agitator. Adjustable Baffle. (2) Spray Balls. Jacketed On Sidewall Only. Jacket Rated @ 150 Psi @175 degrees. 3" Outlet. 2 Thermo Wells. 1 RTD Well. Stainless Steel Ladder. On Stainless Steel Adjustable Legs. Approx 108" dia x 13' H.

Stock# 53749005

Used Bendel 3,175 Gallon Horizontal 304 Stainless Steel Tank. Approximately 64" diameter x 228" straight side. Openings top: (2) 6", (2) 4", (4) 2". (2) 2" bottom end (1 on each side) outlets with valves. Saddle Mounted. Serial# 14928-1/1, Built 2016. UL Listed - Secondary Containment - Aboveground Tank for Flammable Liquids.

Stock# 50800010

Used 3,200 gallon 316L stainless Steel Single Wall Vertical Mix Tank. Closed top with manway and top mounted agitator. Overall approx 8' dia x 13'8"H. Mounted on legs.

Stock# 52933001

Used Crepaco Tank, 3500 Gallons, 304 Stainless Steel, Vertical. Approximate 96" Diameter x 118" Straight Side. Dish top (dented), coned bottom. Fixed stainless steel agitator bridge, (1) baffle, (1) spray ball. Openings top (2) 1-1/2", 2-1/2", 4" for drive, 12" manway with cover. Side openings (1) 20" x 16" oval manway with cover, 2" center bottom outlet. Mounted on (6) stainless steel legs. Serial#C6934.

Stock# 53790001

Used 3,400 Gallon (14000 Liter) Tank, 304 Stainless steel, Vertical. 88" diameter x 132" straight side.14-gauge side wall and 12 gauge top and bottom. Openings Top: 18" manway, with 2" Side port, 2" Bottom center discharge. Mounted on 6 legs. 14'5" overall height.

Stock# 50800019

Used Feldmeier 3,700 Gallon Vertical Single Wall Mix Tank. 316L stainless steel. Cone bottom. Tank height is 19'6". Sidewall is dented. Ladder is with the tank, no safety cage.

Stock# 10128078

Used JV Northwest Inc 3900 Gallon Jacketed Tank, Stainless Steel, Vertical. Approximate 96" diameter x 97" straight side. Cone bottom and dished top. Side has (1) 3/4" triclamp and (1) 3/4" threaded coupling. Dished top has (1) 4" tri clamp nozzle and (2) 2" tri clamp nozzles. Cone has (1) 2" tri clamp nozzle. Cone bottom is removable to make 16" access port. Jacket has (4) -2" threaded pipes on the shell and (2)- 2" threaded pipes on the cone. Cone is 84" length. Top has four lift lugs. Mounted on six legs. The skin over the jacket has some cosmetic dents in it, but it does not affect the jacket or the vessel.

Stock# 53267067

Used 304 Stainless Steel Tank, 4000 gallon capacity. 8 diameter X 12 high straight side. Flat top and bottom. 4" side top inlet. (1) 2" and (1) 3" side bottom outlets. 24" side bottom manway. (1) 2" and (1) 3" top fittings.

Stock# 13140146

Used CMW Inc Approximately 4000 Gallon Stainless Steel Vertical Storage Tank. 96" diameter X 128" high straight side. Flat top and flat bottom with ibeam reinforcements. Top Openings: 6" diameter inspection port with lid, (3) 2" side top inlets, Openings Side: 24" side bottom manway, (4) 2" and (1) 3" side bottom outlets. Mounted on (4) 10" X 8" galvanized i-beam legs.

Stock# 52354001

Used Feldmeier Stainless Steel Storage Tank, Approximately 4,200 Gallons. Approximately 240" High (straight side) X 72" diameter. Last used in Olive Oil operation.

Stock# 52354002

Used Feldmeier Stainless Steel Approximately 4,200 Gallon Storage Tank, Vertical. Approximately 240" High (straight side) X 72" diameter. Side manway. Last used in Olive Oil operation.

Stock# 53930002

Used ICC NorthWest 4,224 Gallon Single wall Stainless Steel Mixing Tank, 304 Stainless Steel, Vertical. Approximate 90" diameter x 144" straight side. Flat top, dished bottom. Internal rated ATMOS at -20 to 200 degrees F. Top agitator bridge with 4-tier impeller blade on approximate 2" diameter shaft (bottom supported), driven by 3HP gear motor. (3) Sidewall baffles. 2" Center bottom outlet. Side lug mounted.

Stock# 53930004

Used ICC NorthWest Single wall Stainless Steel Mixing Tank, 4,224 Gallon, 304 Stainless Steel, Vertical. Approximate 90" diameter x 144" straight side. Flat top, dished bottom. Internal rated ATMOS at -20 to 200 degrees F. Top agitator bridge with 4-tier impeller blade on approximate 2" diameter shaft (bottom supported), no drive. (3) Sidewall baffles. 2" Center bottom outlet. Side lug mounted.

Stock# 53147085

Used 4,250 Gallon Stainless Steel Vertical Storage Tank. 8' diameter x 12' straight side. Slight dished top and bottom. Fabricated by Valley Foundry & Machine Works. Previously used for solvent storage. UL rated vessel.

Stock# 53147086

Used 4,250 Gallon Vertical Stainless Steel Tank UL Rated for Solvents. 8' diameter x 12' straight side. Slight dished top and bottom. Fabricated by Valley Foundry & Machine Works. Previously used for solvent storage.

Stock# 53147087

Stainless Steel 4,250 Gallon Storage Tank Valley Foundry, UL Certified. 8' diameter x 12' straight side. Slight dished top and bottom. Fabricated by Valley Foundry & Machine Works. Previously used for solvent storage.

Stock# 53147088

UL Rated Stainless Vertical Tank 4,250 Gallon Solvent-Grade Vessel. 8'-0" diameter x 12'-0" height. Fabricated by Valley Foundry & Machine Works. Previously used for solvent storage.

Stock# 53147089

Industrial 4,250 Gallon Stainless Steel Tank Vertical, UL Rated. 8'-0" diameter x 12'-0" height. Fabricated by Valley Foundry & Machine Works. Previously used for solvent storage.

Stock# 53147090

4,250 Gallon Stainless UL Storage Tank Vertical Design, Solvent Use. 8'-0" diameter x 12'-0" height. Fabricated by Valley Foundry & Machine Works. Previously used for solvent storage. UL rated vessel.

Stock# 53147078

Used JV Northwest Single-Wall Stainless Steel Tank, 4,500-gallon. 316 stainless steel material of construction; 120" diameter x 86" straight side; Dome top, cone bottom; Bottom head includes a 4" diameter center bottom outlet; Top features a 20" manway and ports: (2) 3" diameter and (1) 4" diameter; Shell Thickness: 2.3mm/0.090 inches; Mounted on (4) stainless steel legs.

Stock# 53147079

Used JV Northwest 4,500-gallon 316 Stainless Steel Tank. Tank measures 120" diameter x 86" straight side; Single-wall; Dome top and cone bottom design. Bottom head includes a 4" diameter center bottom outlet. Top features a 20" manway and ports: (2) 3" diameter and (1) 4" diameter. Shell Thickness: 2.3mm/0.090 inches. Mounted on (4) stainless steel legs.

Stock# 10151499

Used Alloy Fabricators Approximately 4,600 Gallon Mix Tank. 304 Stainless Steel Jacketed. 114" diameter x 90" straight side; Dished top and cone bottom; 304 stainless steel half-pipe jacket rated 44 psi at 335 degrees F; (3) side wall baffles; 7.5 hp axial type agitator, 304 stainless steel, Dual hub with 3 blades each; 51" dia; 18" dia. radial flow at bottom. Serial # 1-146A; Built 1991.

Stock# 53930007

Used ICC Northwest 4,605 Gallon Single wall Stainless Steel Mix Tank, 316L Stainless Steel, Vertical. Approximate 99" diameter x 132" straight side. Flat top, dished bottom. Internal rated ATMOS at -20 to 200 degrees F. Top agitator bridge with 4-tier impeller blade on approximate 2-1/2" diameter shaft (bottom supported), driven by 5HP gear motor. (3) Sidewall baffles. 2" Center bottom outlet. Side lug mounted.

Stock# 53988001

New / Unused Valqua ISO Container, 20 long. Full frame collar 4,800 Gallon / 18,000 liter +/- 2% tank, Type UN Portable Tank T14 ASTM A240 304 stainless steel. Insulated, fitted with Klinge TCR-109-41 refrigeration unit with cooling capacity of 4000W at 38C ambient and 1.7C cargo temperature, Teflon lined, top side rails fitted. Frame Dims: 19'10" x 8'0" x 8'6" / 6058mm x 2438mm x 2591mm. Max Gross Weight: 67,200 lbs / 30,480kg. Max payload: 25,180kg. Working pressure: 58 psi / 4 Bar. Max Allowable Vacuum: 0.41Bar. Design temp: -40C to +93C. Mfg. 2019. Seller can load onto trailer. PDFs for detailed specification and diagrams are provided in the documents section below.

Stock# 53988020

New / Unused Valqua ISO Container, 20 long. Full frame collar 4,800 Gallon / 18,000 liter +/- 2% tank, Type UN Portable Tank T14 ASTM A240 304 stainless steel. Insulated, fitted with Klinge TCR-109-41 refrigeration unit with cooling capacity of 4000W at 38C ambient and 1.7C cargo temperature, Teflon lined, top side rails fitted. Frame Dims: 19'10" x 8'0" x 8'6" / 6058mm x 2438mm x 2591mm. Max Gross Weight: 67,200 lbs / 30,480kg. Max payload: 25,180kg. Working pressure: 58 psi / 4 Bar. Max Allowable Vacuum: 0.41Bar. Design temp: -40C to +93C. Mfg. 2019. Seller can load onto trailer. PDFs for detailed specification and diagrams are provided in the documents section below.

Stock# 53988021

New / Unused Valqua ISO Container, 20 long. Full frame collar 4,800 Gallon / 18,000 liter +/- 2% tank, Type UN Portable Tank T14 ASTM A240 304 stainless steel. Insulated, fitted with Klinge TCR-109-41 refrigeration unit with cooling capacity of 4000W at 38C ambient and 1.7C cargo temperature, Teflon lined, top side rails fitted. Frame Dims: 19'10" x 8'0" x 8'6" / 6058mm x 2438mm x 2591mm. Max Gross Weight: 67,200 lbs / 30,480kg. Max payload: 25,180kg. Working pressure: 58 psi / 4 Bar. Max Allowable Vacuum: 0.41Bar. Design temp: -40C to +93C. Mfg. 2019. Seller can load onto trailer. PDFs for detailed specification and diagrams are provided in the documents section below.

Stock# 53988022

New / Unused Valqua ISO Container, 20 long. Full frame collar 4,800 Gallon / 18,000 liter +/- 2% tank, Type UN Portable Tank T14 ASTM A240 304 stainless steel. Insulated, fitted with Klinge TCR-109-41 refrigeration unit with cooling capacity of 4000W at 38C ambient and 1.7C cargo temperature, Teflon lined, top side rails fitted. Frame Dims: 19'10" x 8'0" x 8'6" / 6058mm x 2438mm x 2591mm. Max Gross Weight: 67,200 lbs / 30,480kg. Max payload: 25,180kg. Working pressure: 58 psi / 4 Bar. Max Allowable Vacuum: 0.41Bar. Design temp: -40C to +93C. Mfg. 2019. Seller can load onto trailer. PDFs for detailed specification and diagrams are provided in the documents section below.

Stock# 10151505

Used Alloy Fabricators Approximately 4,800 Gallon 304 Stainless Steel Tank. Cone top and flat bottom, Internal rated ATM at 140 degrees F. Serial # 1-167A, Built 1991.

Stock# 51142001

Used Scholz GMBH Tank, 4,910 Gallon / 18,600 Liter capacity, 316 Stainless Steel, Horizontal. Approximate 66" diameter x 312" straight side, dished ends. DP: rated -1 bar (-14.5 psi) @ DT: 50 degrees C (122 degrees F). IP: rated 0.5 bar (7.25 psi). Openings top: 2", 3", side: 20" manway with cover, 3". Side bottom: 1-1/2", 8" center bottom outlet. Mounted on (6) legs. Serial # 42852/2. Built 2001.