Used Plastics Dual Rotor and Single Rotor Shredders

Stock# 50189001

Used ENMA Shredder; Model EBS 1200; 90 KW motor; 150 rotor knives; high speed; energy efficient; designed for film shredding before extrusion to repro pellets.

Stock# 50266001

Used- Ameri-Shred 3000 Paper Shredder. Shred width: Feed opening 20" wide; 3600-4500 lbs/hour. Conveyor speed 100, FPM cutters 10-3/4" diameter, A-2 steel cutters spur gears. Heat treated in oil bath adjust wear pads. 12' output conveyor. Feed table modified to accept from bin tipper, rolling cart tipper with table. 64 gallon lifting capacity 350 pounds. Discharge height 42-7/8" motor 1-1/2 115 volt single phase with a 10 cord; 30 hp 460V 3-phase. New Bin tip and sorting table. Includes (2) feeders. Reported to be reconditioned.

Stock# 50292001

Used Tire Shredder; Twin Drive; (2) 7.5 HP Motors; Feed Opening 42" x 19.5"; (2) 12"-16" rows of teeth; Approximately 2 RPM; Cyclodal Reducers; PLC Controller; Capable of shredding 2-4 auto tires per minute.

Stock# 49567009

Used- Hosokawa Polymer Systems Twin Shaft Crusher, Model HPS 2218. (1) Carbon steel rotors approximate 6” diameter x 18” wide. Front rotor driven by a 15hp, 3/60/230/460 volt, 1750 rpm gear motor, ratio 44.96 to 1, back rotor driven by a 25hp, 3/60/230/460 volt, 1760 rpm gear motor, ratio 19.91 to 1. Stainless steel chamber, carbon steel bolt on feed hopper, bottom carbon steel slotted screen. Mounted on carbon steel legs. Serial# HPS-2218-641805.

Stock# 48826001

Used- Zeno Low Noise Grinder, Model ZTLL 1200 x 1600, Carbon Steel. Feed opening 47" (1200mm) wide x 68" (1600mm) long. Approximate 15" (380mm) rotor flight circle with 22 cutting inserts. Rotor driven by a rated 34.5 KW (46 hp), 3/60/480 volt, 1760 rpm motor. Serial# 10A-5894. Built 2011.

Stock# 10755127

Used- Retech, Model RG42KXL Single Rotor Shredder. Manufactured 05/2000, 15" diameter x 42" wide 27 knife rotor driven by a 50 hp 460 volt motor thru a gearbox. 1.4 kw hydraulic ram motor. Gravity discharge, 2.9 cubic yard capacity in-feed hopper. Original oem 460v Allen Bradley plc control panel, 2" holes screen installed.

Stock# 48691001

Used- Vecoplan VAZ 1300 M KN Single Rotor Shredder. Capacity of 1.5 tonnes per hr. 14.4" (370 mm) diameter x 50.7" (1300 mm) straight side rotor with 132 rpm speed by a 67.50 hp/45Kw-415volt/50 cycle/3 Ph motor. 37 cutting rows with 1.56" (40 mm) x (1.56") 40 mm teeth. 56.6" (1450 mm) x 50.9" (1305 mm) product inlet. Including hopper: (1) Inclined belt conveyer and control panel. New 2008. Less than 300 hours in operation.

Stock# 49577001

Used- SSI Shredding Systems Dual-Shear Shredder, Model M85E, Carbon Steel. Approximate 64" x 32" cutting chamber. (22) Cutters approximately 2-3/4" thick. Driven by a 100 hp, 3/60/230/460 volt, 1790 rpm AC motor. (2) Bolt-on bed knives. Hydraulic ram feed hopper, approximate 64" wide x 102" deep (at the top) x 64" tall inside hopper, requires power pack. Approximate 88" tall discharge height. Mounted on a painted carbon steel frame. Serial # 30736. Reported MFG 1994.

Stock# 43742002

Used- Eidal Dual Rotor Shredder. Approximately 25" x 52" feed, approximately 2" thick blades. Driven by a 100 hp AC motor. Includes an operator panel and motor starter.

Stock# 90261

Used- Zeno Single Roll Shredder, Type ZTLL 2000 x 1900. Material of construction is carbon steel. 27.7" diameter x 78" straight side (710 mm x 2000 mm) roll with hydraulic ram feed. 54 interchangeable knives. 5.46" diameter (140 mm) bottom screen. Maximum roll speed 120 rpm via an SEW 135 hp/90 kW, type MC2PLHT07 gearbox by an Elektron 165 hp/110 kW, 380/420/440/480 volt, 50 cycle, 3 ph belt driven motor. Includes operating hydraulics and hopper. Overall dimensions: 15'6" long x 12'3" wide x 9'1" high (4800 mm x 3700 mm x 2500 mm).

Stock# 45282002

Used- Vecoplan Single-Shaft Rotary Grinder, Model RG62/150 SPKFF, Carbon Steel. Approximately 14.57" diameter x 62.99" wide cored fiber rotor with approximate 74 bolt-on cutting inserts, speed 145 rpm. Feed opening 63" wide x 80" long with a bolt on hopper. Horizontal hydraulic feed ram. End discharge with 2" diameter screen holes. Shredder driven by a 150 hp, 3/60/460 volt, 1784 rpm motor thru a Flender reducer. Approximate up to 25,000 pounds an hour throughput depending on product. Includes a control panel with a Vecoplan Touch screen panel, and a 55" wide x 234" long rubber belt conveyor, driven by a 1.5 hp gear motor. Serial # 7661010. Built 2004.

Stock# 10755128

Used- Lindner Model MS2000-S, Super Micromat Single Shaft Vari-Speed Shredder. 65" x 80" Feed Opening. 22" Diameter x 80" Wide Water Cooled Rotor with (104) Cutters in a Mono-Fix System. 3-Piece Counter Knife, 3-Piece Scraper Knife. 132 Kw Main Motor (175 hp). 150-345 rpm, Vari-Speed Rotor Range. 10.5 Kw Hydraulic Ram (14 hp). 1 hp Water Circulation Pump/Cooler. 460 V Controls with Vari-Speed Drive in Stand Alone Control Cabinet. Siemens OP7 Touch Screen Controls. Built in 2003.

Stock# 49921001

Used- Vecoplan VAZ 160/125 SL Single Rotor Shredder. Capacity of 1.5 tonnes per hr. 24.9" (640 mm) diameter x 48.1" (1235 mm) straight side water cooled rotor. With interchangeable bolt-on cutting inserts. Max. rotor speed 330 rpm by a 198 hp/132 Kw-400volt/50 cycle/3 Ph-1485 RPM belt driven motor. Turbo coupling, 2-part product discharge screen. Including hopper, Control panel and Hydraulic unit, 5.5HP/6.6HP-3.7/4.4 KW, 2250 PSI (150 bar). New 2003. Weight 10.5 tonnes. Includes technical documentation. Previously used on hard plastic recycling.