Used Rotary Vacuum Filters

Stock# 11585040

Used- Dorr Oliver Rotary Vacuum Filter. 12" diameter x 12" face. Approximately 3 square foot surface area. T316 Stainless steel contacts. Knife discharge into a repulper through. 3 Spray wash pipes. Drum driven by 1/4 3/60/220-440 volt variable gear drive. Rake agitator driven by1/4 hp 3/60/208-220-440 volt gear head motor. Stainless steel filtrate receiver tank with 1 hp filtrate pump. Mounted on skid.

Stock# 50895019

Used- Komline-Sanderson Rotary Drum Vacuum Filter, Model RDVF 3X6, 56.5 Square Feet Filter Area, Up to 4" Cake capacity, 304L Stainless Steel. (1) 36" Diameter x 72" face drum with plastic grids, driven by a 3/4hp gear motor, stainless steel bottom rake agitator in bottom holding tank driven by a 1/2hp gear motor, adjustable plastic scrapper blade with (3) section discharge chute. Includes a top hood, side vacuum valve, ARO stainless steel diaphragm pump, pre-coat polypropylene diaphragm pump, internal spray bar, 2000 liter polypropylene pre-coat mix tank with agitator, Decker 20ho vacuum pump with oil/air separator tank, and vacuum receiver tank, Durco 3hp centrifugal pump, control panel with an Allen-Bradley PanelView 1250, and Allen-Bradley controllers, miscellaneous piping, and valve. Mounted on a common base. Serial# PCF-1720-RH, built 2010.

Stock# 50906001

Used- Alar Auto-Vac Filter System Consisting Of: (1) Alar Rotary Vacuum Filter, Model 330. 36" Diameter x 36" face, carbon steel drum with stainless steel screen. 28.3 Square feet filtering area. Driven by 1/4hp, 3/60/208-230/460 volt, 1740 rpm gear motor, 288 to 1 ratio. Has holding tank with rack agitator, driven by 1/2 hp, 3/60/208-230/460, 1140 rpm gear motor, 57.5 to 1 ratio. Dry solids discharge with manual knife retract, impulse drive knife advance (motor driven). Includes 200 gallon poly filter aid tank with 3-blade turbine agitator, Dekker vacuum pump, model DV0100B-MA3, driven by 7.5 hp, 1755 rpm motor, stainless steel receiver tank with 1-1/2 hp centrifugal pump, (2) diaphragm pumps, control panel and misc. piping. All unitized on a common carbon steel frame.

Stock# 45225001

Used- TMCI Padovan Taylo Pre-Coat Rotary Vacuum Filter. All 304 Stainless Steel product contact parts. 40" Diameter x 13' roll face stainless steel drum, stainless steel trough with rack agitator driven by 0.75, 480 volt motor, stainless steel advancing knife discharge with drive system, 0.75 kw, 480 volt variable speed drum motor drive, approximately 0.42-2.4 rpm drum speed. Traviani vacuum system with (2) 21.3 kw, 480 volt carbon steel liquid ring vacuum pumps with approximately 500 gallon stainless steel filtrate tank, 38" diameter x 96" straight side, dish top and bottom with 4 kw, 2.5" x 2" stainless steel discharge pump, gallon stainless steel slurry feed tank, 47" diameter x 40" straight side sloped bottom, open top, flat bottom mounted on stand with feed pump, with control panel.

Stock# 40378005

Used- Permutit/Zurn Industries Micromatic Rotary Vacuum Filter, Model 580. Approximately 24 square feet filter area, carbon steel. 4' diameter x 2' face. Includes a holding tank, and a Speed-Trol 1 hp, 1/60/115-208/230 volt 1725 rpm motor.

Stock# 47240001

Used- Nivoba Engineering Type FS Mobile Trailer Mounted Rotary Vacuum Filter, Model FS 160-20, Stainless Steel. Drum approximate 1.6 meter (62.99") diameter x 4 meter (157.48") face. Stainless steel holding tank, solution valve, knife scraper with take away conveyor, and inclined discharge conveyor, (1) stainless steel, (1) carbon steel Sihi vacuum pumps, 4 cubic meters precoat mixing tank. Filter powered by a Deutz 5 cylinder diesel engine, hooked on to a generator (can also run it on net- power), 200 liter diesel tank. Filter serial# 1059-F01526535000, running hours on meter 412, built 1991. Unit built in a trailer with road legal Dutch registration. Trailer approximate 10 meters long x 2.5 meters wide and approximately 3.90 meters high, air brakes and 24 volt lights, including registration number Deutz generator, two electric power driven stirrers and filling opening. Complete dashboard to operate the machine and built in equipment. Frequency inverter to change the rpm's on the drum and change the direction of rotation. One centrifugal pump to pump the pre-coat into the vacuum filter. One high pressure pump to clean the machine or to spray the filter clean. Catwalk with side protection. Machine can be bought complete or in separate parts. Previously used with precoat to dewater wastewater. Has a deutz diesel agregate for the power. Approximately 64 amp power supply. 25 square meter filter deck.

Stock# 50444001

Used- Alar Rotary Vacuum Filter, 6' diameter x 9' Face. Stainless Steel Tank and Drum. With Nash Vacuum Pump, approximately 25 HP and Separator Tank. Mobile.

Stock# 50444002

Used- Alar Rotary Vacuum Filter, 6 diameter x 9 Face. Stainless steel Tank and Drum. With Nash Vacuum Pump, approximately 25 HP and Separator Tank. Mobile.

Stock# 46456001

Used- Ametek Rotary Vacuum Filter. 6' x 4', stainless steel drum. Drum speed 3.83-34.5 RPM. Left hand unit, precoat depth gage, stainless steel plates, Sumitomo C-face motor, SM-Beier Variator, Model NS5AGMY 2:1. Speed 700-175, input 1750 rpm, 2 hp at maximum speed, 1 hp at minimum speed. Footprint of legs are 65-3/4" deep x 77" wide. Overall shipping dimensions are 122" long x 122" wide x 8'8" tall. Approximately 8,000 pounds. Previously used in vegetable oil application.